Electrospun tri-layered zein/PVP-GO/zein nanofiber mats for providing biphasic drug release profiles.

Simple sequential electrospinning was utilized to create a functional tri-layered nanofiber mesh that achieves time-regulated biphasic drug release behavior. A tri-layered nanofiber mesh -composed of zein and poly(vinylpyrrolidone) (PVP) as the top/bottom and middle layers, respectively - was constructed through sequential electrospinning with ketoprofen (KET) as the model drug. PVP was blended with graphene oxide (GO) to improve the drug release functionality of PVP nanofiber as well as its mechanical properties. Scanning electron microscopy confirmed that the resultant nanofibers had a linear morphology, smooth surface, and tri-layered structure. In addition, X-ray diffraction patterns, differential scanning calorimetric analyses, and Fourier transform infrared spectra verified that the drugs were uniformly dispersed throughout the nanofiber due to good compatibility between the polymer and KET induced by hydrogen interaction. In vitro release test of the tri-layered structure, each component of which had distinct release features, successfully demonstrated time-regulated biphasic drug release. Also, it was confirmed that the drug release rate and duration can be controlled by designing a morphological feature - namely, mesh thickness - which was achieved by simply regulating the spinning time of the first and third layer. This multilayered electrospun nanofiber mesh fabricated by sequential electrospinning could provide a useful method of controlling drug release behavior over time, which will open new routes for practical applications and stimulate further research in the development of effective drug release carriers.

Handspinning Enabled Highly Concentrated Carbon Nanotubes with Controlled Orientation in Nanofibers.

The novel method, handspinning (HS), was invented by mimicking commonly observed methods in our daily lives. The use of HS allows us to fabricate carbon nanotube-reinforced nanofibers (CNT-reinforced nanofibers) by addressing three significant challenges: (i) the difficulty of forming nanofibers at high concentrations of CNTs, (ii) aggregation of the CNTs, and (iii) control of the orientation of the CNTs. The handspun nanofibers showed better physical properties than fibers fabricated by conventional methods, such as electrospinning. Handspun nanofibers retain a larger amount of CNTs than electrospun nanofibers, and the CNTs are easily aligned uniaxially. We attributed these improvements provided by the HS process to simple mechanical stretching force, which allows for orienting the nanofillers along with the force direction without agglomeration, leading to increased contact area between the CNTs and the polymer matrix, thereby providing enhanced interactions. HS is a simple and straightforward method as it does not require an electric field, and, hence, any kinds of polymers and solvents can be applicable. Furthermore, it is feasible to retain a large amount of various nanofillers in the fibers to enhance their physical and chemical properties. Therefore, HS provides an effective pathway to create new types of reinforced nanofibers with outstanding properties.

Noble metal/functionalized cellulose nanofiber composites for catalytic applications.

In this study, cellulose acetate nanofibers (CANFs) with a mean diameter of 325 ± 2.0 nm were electrospun followed by deacetylation and functionalization to produce anionic cellulose nanofibers (f-CNFs). The noble metal nanoparticles (RuNPs and AgNPs) were successfully decorated on the f-CNFs by a simple wet reduction method using NaBH4 as a reducing agent. TEM and SEM images of the nanocomposites (RuNPs/CNFs and AgNPs/CNFs) confirmed that the very fine RuNPs or AgNPs were homogeneously dispersed on the surface of f-CNFs. The weight percentage of the Ru and Ag in the nanocomposites was found to be 13.29 wt% and 22.60 wt% respectively; as confirmed by SEM-EDS analysis. The metallic state of the Ru and Ag in the nanocomposites was confirmed by XPS and XRD analyses. The usefulness of these nanocomposites was realized from their superior catalytic activity. In the aerobic oxidation of benzyl alcohol to benzaldehyde, the RuNPs/CNFs system gave a better yield of 89% with 100% selectivity. Similarly, the AgNPs/CNFs produced an excellent yield of 99% (100% selectivity) in the aza-Michael reaction of 1-phenylpiperazine with acrylonitrile. Mechanism has been proposed for the catalytic systems.

Acanthopanax koreanum fruit waste inhibits lipopolysaccharide-induced production of nitric oxide and prostaglandin E2 in RAW 264.7 macrophages.

The Acanthopanax koreanum fruit is a popular fruit in Jeju Island, but the byproducts of the alcoholic beverage prepared using this fruit are major agricultural wastes. The fermentability of this waste causes many economic and environmental problems. Therefore, we investigated the suitability of using A. koreanum fruit waste (AFW) as a source of antiinflammatory agents. AFWs were extracted with 80% EtOH. The ethanolic extract was then successively partitioned with hexane, CH(2)Cl(2), EtOAc, BuOH, and water. The results indicate that the CH(2)Cl(2) fraction (100 microg/mL) of AFW inhibited the LPS-induced nitric oxide (NO) and prostaglandin E(2) (PGE(2)) production in RAW 264.7 cells by 79.6% and 39.7%, respectively. These inhibitory effects of the CH(2)Cl(2) fraction of AFWs were accompanied by decreases in the expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) proteins and iNOS and COX-2 mRNA in a dose-dependent pattern. The CH(2)Cl(2) fraction of AFWs also prevented degradation of IkappaB-alpha in a dose-dependent manner. Ursolic acid was identified as major compound present in AFW, and CH(2)Cl(2) extracts by high performance liquid chromatography (HPLC). Furthermore using pure ursolic acid as standard and by HPLC, AFW and CH(2)Cl(2) extracts was found to contain 1.58 mg/g and 1.75 mg/g, respectively. Moreover, we tested the potential application of AFW extracts as a cosmetic material by performing human skin primary irritation tests. In these tests, AFW extracts did not induce any adverse reactions. Based on these results, we suggest that AFW extracts be considered possible anti-inflammatory candidates for topical application.

The genome sequence of the ethanologenic bacterium Zymomonas mobilis ZM4.

We report the complete genome sequence of Zymomonas mobilis ZM4 (ATCC31821), an ethanologenic microorganism of interest for the production of fuel ethanol. The genome consists of 2,056,416 base pairs forming a circular chromosome with 1,998 open reading frames (ORFs) and three ribosomal RNA transcription units. The genome lacks recognizable genes for 6-phosphofructokinase, an essential enzyme in the Embden-Meyerhof-Parnas pathway, and for two enzymes in the tricarboxylic acid cycle, the 2-oxoglutarate dehydrogenase complex and malate dehydrogenase, so glucose can be metabolized only by the Entner-Doudoroff pathway. Whole genome microarrays were used for genomic comparisons with the Z. mobilis type strain ZM1 (ATCC10988) revealing that 54 ORFs predicted to encode for transport and secretory proteins, transcriptional regulators and oxidoreductase in the ZM4 strain were absent from ZM1. Most of these ORFs were also found to be actively transcribed in association with ethanol production by ZM4.

Regulation of male sex hormone levels by soy isoflavones in rats.

Several studies have suggested that soybean intake is associated with a lower risk of prostate cancer. However, the mechanism of prostate cancer prevention by soybeans remains unclear. Because prostate cancer is reported to have an association with an increased level of dihydrotestosterone (DHT) and soybean isoflavones are known to inhibit 5 alpha-reductase, which is involved in the conversion of testosterone to DHT, the effects of soybean extract and isoflavones on the plasma levels of male sex hormones were investigated using male rats. In Experiment I, Sprague-Dawley rats were fed diets with and without soy flour; in Experiment II, rats were fed diets containing 2% soy methanol extract or 0.2% semipurified isoflavones or a control diet. The study showed a reduction of plasma DHT along with an increase in total plasma androgen in rats fed soy flour or semipurified isoflavones for 1 wk. These results suggest that soy isoflavone intake may reduce plasma DHT level.