Harnessing water fleas for water reclamation: A nature-based tertiary wastewater treatment technology.

Urbanisation, population growth, and climate change have put unprecedented pressure on water resources, leading to a global water crisis and the need for water reuse. However, water reuse is unsafe unless persistent chemical pollutants are removed from reclaimed water. State-of-the-art technologies for the reduction of persistent chemical pollutants in wastewater typically impose high operational and energy costs and potentially generate toxic by-products (e.g., bromate from ozonation). Nature-base solutions are preferred to these technologies for their lower environmental impact. However, so far, bio-based tertiary wastewater treatments have been inefficient for industrial-scale applications. Moreover, they often demand significant financial investment and large infrastructure, undermining sustainability objectives. Here, we present a scalable, low-cost, low-carbon, and retrofittable nature-inspired solution to remove persistent chemical pollutants (pharmaceutical, pesticides and industrial chemicals). We showed Daphnia's removal efficiency of individual chemicals and chemicals from wastewater at laboratory scale ranging between 50 % for PFOS and 90 % for diclofenac. We validated the removal efficiency of diclofenac at prototype scale, showing sustained performance over four weeks in outdoor seminatural conditions. A techno-commercial analysis on the Daphnia-based technology suggested several technical, commercial and sustainability advantages over established and emerging treatments at comparable removal efficiency, benchmarked on available data on individual chemicals. Further testing of the technology is underway in open flow environments holding real wastewater. The technology has the potential to improve the quality of wastewater effluent, meeting requirements to produce water appropriate for reuse in irrigation, industrial application, and household use. By preventing persistent chemicals from entering waterways, this technology has the potential to maximise the shift to clean growth, enabling water reuse, reducing resource depletion and preventing environmental pollution.

Reductions and changing patterns of ambient PCDD/Fs in the UK: evidence and implications.

Archived herbage samples taken between the mid-1800s and the present day from the Park Grass permanent grassland experiment in the UK were analysed for PCDD/Fs. The concentrations of SigmaP((4-8))CDD/Fs ranged between 15 (in 2003-2004) and 320 pg/g (in 1963) and the SigmaTEQ ranged between 0.11 (2003-2004) and 2.4 pg/g in (1903). The underlying trend from the mid-1970s to the present is of a decline by about factor of 10, indicating a general reduction in the air concentration/deposition fluxes. The homologue pattern in samples from the first half of the 20th century was characterised by the lower (mono- to tri-) PCDFs, indicating the dominance of domestic wood/coal burning on the SigmaP((1-8))CDD/Fs signature. The second half of the 20th century saw a substantial decline in domestic wood/coal burning for space heating in the UK, but also the 'rise and fall' in the production/use of chloroaromatic compounds - notably pentachlorophenol (PCP). The isomer/homologue patterns for the 1960-2004 samples have a much lower contribution from the lower PCDFs and large contributions from the hepta and octa-CDDs. The possibility that these are related to PCP inputs via different routes is discussed. The UK - in line with other countries - has had a policy to reduce the environmental sources and the emissions of PCDD/Fs, by the introduction of new combustion control technologies and emissions standards. However, these were not introduced to specifically address PCDD/F emissions until the 1990s. The declines in PCDD/F levels in these samples: (a) pre-date the introduction of emission control measures on incinerators and other combustion sources in the UK; (b) appear to have been largely unaffected by them.

Verifying emission factors and national POPs emission inventories for the UK using measurements and modelling at two rural locations.

Different approaches are used to verify the adequacy of emission factors (EFs) and their use in emission inventories of persistent organic pollutants (POPs). The applicability of EFs was tested using atmospheric dispersion modelling to predict atmospheric concentrations of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and resulting toxic equivalents (SigmaTEQ) and particulate matter <10 microm (PM(10)) in two rural locations in northern England (UK). The modelling was based on general assumptions of fuel composition, consumption and heating needs to simulate emissions of POPs from the domestic burning of coal and wood where ambient measurements were made in the winter of 1998. The model was used to derive the local contribution to ambient air concentrations, which were estimated independently based on comparative air measurements. The results support the hypothesis that in both villages, the majority of PAHs and the lower chlorinated PCDFs were locally released. The situation for PCBs and polychlorinated naphthalenes (PCNs) was different. While the EFs show the release of both compound groups from the domestic burning of coal and wood, the ambient levels of these "legacy POPs" in the villages were still clearly dominated by other sources. Rural areas relying mainly on fossil fuels can exceed the proposed UK ambient air quality standard for benzo[a]pyrene during winter. The measured EFs were then used to estimate the importance of the domestic burning of coal and wood to national emission inventories for these compound classes. Extrapolations to the UK suggest that the domestic burning of pure wood and coal were minor emitters for chlorinated POPs but contributed strongly to PAH and PM(10) levels in 2000. Finally, the UK's national POPs emission inventories based on source inventories and EF, as used here, were compared to estimates derived using the increase in atmospheric concentration of selected POPs.

Detailed study of factors controlling atmospheric concentrations of PCNs.

Atmospheric concentrations of polychlorinated naphthalenes (PCNs) (108 samples in total) were measured at two rural/ semirural sites in England and one remote site on the west coast of Ireland in the years 2001 and 2000, respectively. Detailed analysis of the factors affecting concentrations is performed. At Mace Head (MH) Ireland, concentrations of sigmaPCNs ranged between 1.7 and 55 pg m(-3) with a mean of 15 pg m(-3) and were controlled primarily by advection. sigmaPCNs concentrations at Hazelrigg (HR), northwest England, ranged between 31 and 310 pg m(-3) with a mean of 110 pg m(-3), and at Chilton (CH), southwest England, ranged between 31 and 180 pg m(-3) with a mean of 85 pg m(-3). Data from the HR site shows that PCN concentrations have not declined between the early 1990s and 2001, while PCB concentrations have declined. The ratio of the sigmaPCNs/ sigmaPCBs was close to or greater than 1 at all sites. From air mass back trajectories, it is clear that local/regional sources influenced concentrations of PCNs at all sites, particularly at MH. At the two English sites during the summer, concentrations of PCNs were strongly influenced by temperature, indicating that air-surface exchange processes play an important role. Advection became more influential during winter, particularly at CH, where a different homologue profile was observed in some samples when air masses approached from the southwest and PCN concentrations increased. The average mixture profile of PCNs in air was similar to that observed in other studies and different from that in Halowax 1014.

PCDD/Fs in Norwegian and U.K. soils: implications for sources and environmental cycling.

This paper presents data on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in a set of well-characterized, undisturbed surface (0-5 cm) and subsurface background soils from the U.K. and Norway. The soils have been used previously to investigate the latitudinal distribution, fractionation, cold condensation, and "hopping" of other classes of persistent organic pollutants (POPs). The mono- to octa-CDD/F homologues were quantified. Woodland soils contained higher concentrations (on a dry and soil organic matter (SOM)-basis) than grassland soils, consistent with previous studies. The absolute concentrations of all the PCDDs and most of the PCDFs significantly decreased with latitude, generally supporting the idea of a "southern source region" and a "remote/ receiving northern region". There was little evidence of "fractionation" and minimal influence of PCDD/F "hopping" on PCDD/F distribution. The %SOM content had a rather minor influence on soil PCDD/F composition. These findings contrast with the trends seen in these soils for hexachlorobenzene (HCB), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs). Possible reasons for these differences are discussed and may include influences of/proximity to diffusive combustion sources and/ or sources of variable homologue emissions, formation/ conversion processes for PCDD/Fs in soils, or strong soil-PCDD/F partitioning. These soils, from regionally remote/ background locations in Europe contained between 0.2 and 78 pg sigmaTEQ/g DW. Some therefore exceed recommended levels of contamination for certain land uses by some European countries. These recommendations seem unrealistic and prohibitively restrictive in light of the dataset presented here.

Emission factors and importance of PCDD/Fs, PCBs, PCNs, PAHs and PM10 from the domestic burning of coal and wood in the U.K.

This paper presents emission factors (EFs) derived for a range of persistent organic pollutants (POPs) when coal and wood were subject to controlled burning experiments, designed to simulate domestic burning for space heating. A wide range of POPs were emitted, with emissions from coal being higher than those from wood. Highest EFs were obtained for particulate matter, PM10, (approximately 10 g/kg fuel) and polycyclic aromatic hydrocarbons (approximately 100 mg/ kg fuel for sigmaPAHs). For chlorinated compounds, EFs were highest for polychlorinated biphenyls (PCBs), with polychlorinated naphthalenes (PCNs), dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) being less abundant. EFs were on the order of 1000 ng/kg fuel for sigmaPCBs, 100s ng/ kg fuel for sigmaPCNs and 100 ng/kg fuel for sigmaPCDD/Fs. The study confirmed that mono- to trichlorinated dibenzofurans, Cl1,2,3DFs, were strong indicators of low temperature combustion processes, such as the domestic burning of coal and wood. It is concluded that numerous PCB and PCN congeners are routinely formed during the combustion of solid fuels. However, their combined emissions from the domestic burning of coal and wood would contribute only a few percent to annual U.K. emission estimates. Emissions of PAHs and PM10 were major contributors to U.K. national emission inventories. Major emissions were found from the domestic burning for Cl1,2,3DFs, while the contribution of PCDD/F-sigmaTEQ to total U.K. emissions was minor.

PBDEs in the atmosphere of three locations in western Europe.

Atmospheric concentrations of PBDEs (108 samples in total) were measured at 2 rural/semirural sites in England and 1 remote site on the west coast of Ireland in the years 2001 and 2000, respectively. Detailed analysis of the factors affecting concentrations is performed. The United Kingdom (UK) has been a major producer and user of PBDEs. Concentrations of sigmaPBDEs at Mace Head (MH), Ireland ranged between 0.22 and 5.0 pg m(-3) with a mean of 2.6 pg m(-3) and were controlled primarily by advection. sigmaPBDEs concentrations at Hazelrigg (HR), northwest England, ranged between 2.8 and 37 pg m(-3) with a mean of 12 pg m(-3) and at Chilton (CH), southwest England between 3.4 and 33 pg m(-3) with a mean of 11 pg m(-3). The average mixture of PBDEs in air was similar to that of commercial penta-BDE products. Movement of air over local/regional sources influenced concentrations of PBDEs at all sites, particularly at MH. At the two English sites during the summer, concentrations of PBDEs were strongly influenced bytemperature, indicating that air-surface exchange processes play an important role. Advection became more influential during winter, particularly at CH, where a different congener profile was observed in some samples as ambient air temperatures decreased and PBDE concentrations increased. It is hypothesized that this was due to increased emissions from diffuse combustion sources.

Seasonal and long-term trends in atmospheric PAH concentrations: evidence and implications.

Atmospheric monitoring data for selected polynuclear aromatic hydrocarbons (PAHs) were compiled from remote, rural and urban locations in the UK, Sweden, Finland and Arctic Canada. The objective was to examine the seasonal and temporal trends, to shed light on the factors which exert a dominant influence over ambient PAH levels. Urban centres in the UK have concentrations 1-2 orders of magnitude higher than in rural Europe and up to 3 orders of magnitude higher than Arctic Canada. Interpretation of the data suggests that proximity to primary sources 'drives' PAH air concentrations. Seasonality, with winter (W) > summer (S), was apparent for most compounds at most sites; high molecular weight compounds (e.g. benzo[a]pyrene) showed this most clearly and consistently. Some low molecular weight compounds (e.g. phenanthrene) sometimes displayed S>W seasonality at some rural locations. Strong W>S seasonality is linked to seasonally-dependent sources which are greater in winter. This implicates inefficient combustion processes, notably the diffusive domestic burning of wood and coal. However, sometimes seasonality can also be strongly influenced by broad changes in meteorology and air mass origin (e.g. in the Canadian Arctic). The datasets examined here suggest a downward trend for many PAHs at some sites, but this is not apparent for all sites and compounds. The inherent noise in ambient air monitoring data makes it difficult to derive unambiguous evidence of underlying declines, to confirm the effectiveness of international source reduction measures.

Reciprocal Ia inhibition in patients with asymmetric spinal spasticity.

OBJECTIVES: Previous studies on reciprocal Ia inhibition in spinal spasticity were contradictory, probably due to differences in the etiology, severity, and the course of recovery from the disease. The purpose of the present study was to establish a correlation between Ia inhibition and clinical abnormalities in spasticity following a spinal cord injury (SCI). METHODS: We studied reciprocal Ia inhibition in bilateral soleus muscles in five SCI patients with marked asymmetry of spasticity and functional recovery for the right and left legs. Reciprocal Ia inhibition was determined from the short latency suppression of the soleus H-reflex by conditioning stimulation of the peroneal nerve. RESULTS: In all the patients, Ia inhibition was asymmetric. Ia inhibition in the legs with good recovery and less spasticity was pronounced, but Ia inhibition in the more spastic legs was small or absent. Facilitation was seen only on the sides with poor recovery in two patients. In the healthy subjects the amount of Ia inhibition varied, but no side-to-side difference was found. CONCLUSIONS: These results suggest that reciprocal Ia inhibition varies according to the functional recovery. Pronounced Ia inhibition may be related to good functional recovery in patients with SCI.