RESUMO
The development of stimuli-interactive displays based on alternating current (AC)-driven electroluminescence (EL) is of great interest, owing to their simple device architectures suitable for wearable applications requiring resilient mechanical flexibility and stretchability. AC-EL displays can serve as emerging platforms for various human-interactive sensing displays (HISDs) where human information is electrically detected and directly visualized using EL, promoting the development of the interaction of human-machine technologies. This review provides a holistic overview of the latest developments in AC-EL displays with an emphasis on their applications for HISDs. AC-EL displays based on exciton recombination or impact excitations of hot electrons are classified into four representative groups depending upon their device architecture: 1) displays without insulating layers, 2) displays with single insulating layers, 3) displays with double insulating layers, and 4) displays with EL materials embedded in an insulating matrix. State-of-the-art AC HISDs are discussed. Furthermore, emerging stimuli-interactive AC-EL displays are described, followed by a discussion of scientific and engineering challenges and perspectives for future stimuli-interactive AC-EL displays serving as photo-electronic human-machine interfaces.
RESUMO
Optical encryption using coloration and photoluminescent (PL) materials can provide highly secure data protection with direct and intuitive identification of encrypted information. Encryption capable of independently controlling wavelength-tunable coloration as well as variable light intensity PL is not adequately demonstrated yet. Herein, a rewritable PL and structural color (SC) display suitable for dual-responsive optical encryption developed with a stimuli-responsive SC of a block copolymer (BCP) photonic crystal (PC) with alternating in-plane lamellae, of which a variety of 3D and 2D perovskite nanocrystals is preferentially self-assembled with characteristic PL, is presented. The SC of a BCP PC is controlled in the visible range with different perovskite precursor doping times. The perovskite nanocrystals developed in the BCP PC are highly luminescent, with a PL quantum yield of ≈33.7%, yielding environmentally stable SC and PL dual-mode displays. The independently programmed SC and PL information is erasable and rewritable. Dual-responsive optical encryption is demonstrated, in which true Morse code information is deciphered only when the information encoded by SCs is properly combined with PL information. Numerous combinations of SC and PL realize high security level of data anticounterfeiting. This dual-mode encryption display offers novel optical encryption with high information security and anti-counterfeiting.
RESUMO
Optical encryption technologies based on room-temperature light-emitting materials are of considerable interest. Herein, we present three-dimensional (3D) printable dual-light-emitting materials for high-performance optical pattern encryption. These are based on fluorescent perovskite nanocrystals (NCs) embedded in metal-organic frameworks (MOFs) designed for phosphorescent host-guest interactions. Notably, perovskite-containing MOFs emit a highly efficient blue phosphorescence, and perovskite NCs embedded in the MOFs emit characteristic green or red fluorescence under ultraviolet (UV) irradiation. Such dual-light-emitting MOFs with independent fluorescence and phosphorescence emissions are employed in pochoir pattern encryption, wherein actual information with transient phosphorescence is efficiently concealed behind fake information with fluorescence under UV exposure. Moreover, a 3D cubic skeleton is developed with the dual-light-emitting MOF powder dispersed in 3D-printable polymer filaments for 3D dual-pattern encryption. This article outlines a universal principle for developing MOF-based room-temperature multi-light-emitting materials and a strategy for multidimensional information encryption with enhanced capacity and security.
RESUMO
Free-standing and film-type moisture-driven energy generators (MEGs) that harness the preferential interaction of ionized moisture with hydrophilic materials are interesting because of their wearability and portability without needing a water container. However, most such MEGs work in limited humidity conditions, which provide a substantial moisture gradient. Herein, we present a high-performance MEG with sustainable power-production capability in a wide range of environments. The bilayer-based device comprises a negatively surface-charged, hydrophilic MXene (Ti3C2Tx) aerogel and polyacrylamide (PAM) ionic hydrogel. The preferential selection on the MXene aerogel of positive charges supplied from the salts and water in the hydrogel is predicted by the first-principle simulation, which results in a high electric output in a wide relative humidity range from 20% to 95%. Furthermore, by replacing the hydrogel with an organohydrogel of PAM that has excellent water retention and structural stability, a device with long-term electricity generation is realized for more than 15 days in a broad temperature range (from -20 to 80 °C). Our MXene aerogel MEGs connected in series supply sufficient power for commercial electronic components in various outdoor environments. Moreover, an MXene aerogel MEG works as a self-powered sensor for recognizing finger bending and facial expression.
RESUMO
The resemblance between electrons and optical waves has strongly driven the advancement of mesoscopic physics, evidenced by the widespread use of terms such as fermion or electron optics. However, electron waves have yet to be understood in open cavity structures which have provided contemporary optics with rich insight towards non-Hermitian systems and complex interactions between resonance modes. Here, we report the realization of an open cavity resonator in a two-dimensional electronic system. We studied the resonant electron modes within the cavity and resolved the signatures of longitudinal and transverse quantization, showing that the modes are robust despite the cavity being highly coupled to the open background continuum. The transverse modes were investigated by applying a controlled deformation to the cavity, and their spatial distributions were further analyzed using magnetoconductance measurements and numerical simulation. These results lay the groundwork to exploring matter waves in the context of modern optical frameworks.
RESUMO
The development of human-interactive sensing displays (HISDs) that simultaneously detect and visualize stimuli is important for numerous cutting-edge human-machine interface technologies. Therefore, innovative device platforms with optimized architectures of HISDs combined with novel high-performance sensing and display materials are demonstrated. This study comprehensively reviews the recent advances in HISDs, particularly the device architectures that enable scaling-down and simplifying the HISD, as well as material designs capable of directly visualizing input information received by various sensors. Various HISD platforms for integrating sensors and displays are described. HISDs consist of a sensor and display connected through a microprocessor, and attempts to assemble the two devices by eliminating the microprocessor are detailed. Single-device HISD technologies are highlighted in which input stimuli acquired by sensory components are directly visualized with various optical components, such as electroluminescence, mechanoluminescence and structural color. The review forecasts future HISD technologies that demand the development of materials with molecular-level synthetic precision that enables simultaneous sensing and visualization. Furthermore, emerging HISDs combined with artificial intelligence technologies and those enabling simultaneous detection and visualization of extrasensory information are discussed.
RESUMO
With recent advances in interactive displays, the development of a stand-alone interactive display with no electrical interconnection is of great interest. Here, a wireless stand-alone interactive display (WiSID), enabled by direct capacitive coupling, consisting of three layers: two in-plane metal electrodes separated by a gap, a composite layer for field-induced electroluminescence (EL) and inverse piezoelectric sound, and a stimuli-responsive layer, from bottom to top, is presented. Alternating current power necessary for field-induced EL and inverse piezoelectric sound is wirelessly transferred from a power unit, with two in-plane electrodes remotely separated from the WiSID. The unique in-plane power transfer through the stimuli-sensitive polar bridge allows stand-alone operation of the WiSID, making it suitable for the wireless dynamic monitoring of medical fluids. Moreover, a haptic wireless stand-alone trimodal interactive display mounted on a human finger is demonstrated, whereby touch is wirelessly displayed in various outputs of EL, inverse piezoelectric sound, and tactile vibration, making it suitable for a wireless three-mode smart braille display.
RESUMO
The development of electrodes with high conductivity, optical transparency, and reliable mechanical flexibility and stability is important for numerous solution-processed photoelectronic applications. Although transparent Ti3C2TX MXene electrodes with high conductivity are promising, their suitability for displays remains limited because of the high sheet resistance, which is caused by undesirable flake junctions and surface roughness. Herein, a flexible and transparent electrode has been fabricated that is suitable for a full-solution-processed quantum dot light-emitting diode (QLED). An MXene-silver nanowire (AgNW) hybrid electrode (MXAg) consists of a highly conductive AgNW network mixed with solution-processed MXene flakes. Efficient welding of wire-to-wire junctions with MXene flakes yields an electrode with a low sheet resistance and a high transparency of approximately 13.9 Ω sq-1 and 83.8%, respectively. By employing a thin polymer buffer layer of poly(methyl methacrylate) (PMMA), followed by mild thermal treatment, a hybrid PMMA-based MXene-AgNW (MXAg@PMMA) electrode in which the work function of an MXAg hybrid FTE physically embedded in PMMA (MXAg@PMMA) can be tuned by controlling the amount of MXene in the hybrid film facilitates the development of a high-performance solution-processed QLED that exhibits maximum external quantum and current efficiencies of approximately 9.88% and 25.8 cd/A, respectively, with excellent bending stability. This work function-tunable flexible transparent electrode based on solution-processed nanoconductors provides a way to develop emerging high-performance, wearable, cost-effective, and soft electroluminescent devices.
RESUMO
MXenes (Ti3C2TX) are two-dimensional transition-metal carbides and carbonitrides with high conductivity and optical transparency. However, transparent MXene electrodes with high environmental stability suitable for various flexible organic electronic devices have rarely been demonstrated. By laminating a thin polymer film onto a solution-processed MXene layer to protect the MXene film from harsh environmental conditions, we present transparent and flexible MXene electronic devices. A thin polymer layer spin-coated onto a transparent MXene electrode provides environmental stability even under air exposure longer than 7 d at high temperatures (up to 70 °C) and humidity levels (up to 50%) without degrading the transparency of the electrode. The resulting polymer-laminated (PL) MXene electrode facilitates the development of a variety of field-driven photoelectronic devices by exploiting the electric field exerted between the MXene layer and the counter electrode through the insulating polymer. Field-induced electroluminescent displays, based on both organic and inorganic phosphors, with PL-MXene electrodes are demonstrated with high transparency and mechanical flexibility. Furthermore, our PL-MXene electrode exhibits high versatility through successful implementation in capacitive-type pressure sensors and triboelectric nanogenerators, resulting in field-driven sensing and energy harvesting electronic devices with excellent operation reliability.
RESUMO
Development of a human-interactive display enabling the simultaneous sensing, visualisation, and memorisation of a magnetic field remains a challenge. Here we report a skin-patchable magneto-interactive electroluminescent display, which is capable of sensing, visualising, and storing magnetic field information, thereby enabling 3D motion tracking. A magnetic field-dependent conductive gate is employed in an alternating current electroluminescent display, which is used to produce non-volatile and rewritable magnetic field-dependent display. By constructing mechanically flexible arrays of magneto-interactive displays, a spin-patchable and pixelated platform is realised. The magnetic field varying along the z-axis enables the 3D motion tracking (monitoring and memorisation) on 2D pixelated display. This 3D motion tracking display is successfully used as a non-destructive surgery-path guiding, wherein a pathway for a surgical robotic arm with a magnetic probe is visualised and recorded on a display patched on the abdominal skin of a rat, thereby helping the robotic arm to find an optimal pathway.
Assuntos
Eletricidade , Imageamento Tridimensional , Luminescência , Campos Magnéticos , Movimento (Física) , Animais , Eletrodos , Masculino , Ratos Sprague-Dawley , VolatilizaçãoRESUMO
Quantum point contacts (QPC) are a primary component in mesoscopic physics and have come to serve various purposes in modern quantum devices. However, fabricating a QPC that operates robustly under extreme conditions, such as high bias or magnetic fields, still remains an important challenge. As a solution, we have analyzed the trench-gated QPC (t-QPC) that has a central gate in addition to the split-gate structure used in conventional QPCs (c-QPC). From simulation and modelling, we predicted that the t-QPC has larger and more even subband spacings over a wider range of transmission when compared to the c-QPC. After an experimental verification, the two QPCs were investigated in the quantum Hall regimes as well. At high fields, the maximally available conductance was achievable in the t-QPC due to the local carrier density modulation by the trench gate. Furthermore, the t-QPC presented less anomalies in its DC bias dependence, indicating a possible suppression of impurity effects.
RESUMO
Lightweight and flexible tactile learning machines can simultaneously detect, synaptically memorize, and subsequently learn from external stimuli acquired from the skin. This type of technology holds great interest due to its potential applications in emerging wearable and human-interactive artificially intelligent neuromorphic electronics. In this study, an integrated artificially intelligent tactile learning electronic skin (e-skin) based on arrays of ferroelectric-gate field-effect transistors with dome-shape tactile top-gates, which can simultaneously sense and learn from a variety of tactile information, is introduced. To test the e-skin, tactile pressure is applied to a dome-shaped top-gate that measures ferroelectric remnant polarization in a gate insulator. This results in analog conductance modulation that is dependent upon both the number and magnitude of input pressure-spikes, thus mimicking diverse tactile and essential synaptic functions. Specifically, the device exhibits excellent cycling stability between long-term potentiation and depression over the course of 10 000 continuous input pulses. Additionally, it has a low variability of only 3.18%, resulting in high-performance and robust tactile perception learning. The 4 × 4 device array is also able to recognize different handwritten patterns using 2-dimensional spatial learning and recognition, and this is successfully demonstrated with a high degree accuracy of 99.66%, even after considering 10% noise.
RESUMO
The direct sensing and storing of the information of liquids with different polarities are of significant interest, in particular, through means related to human senses for emerging biomedical applications. Here, we present an interactive platform capable of sensing and storing the information of liquids. Our platform utilises sound arising from liquid-interactive ferroelectric actuation, which is dependent upon the polarity of the liquid. Liquid-interactive sound is developed when a liquid is placed on a ferroelectric polymer layer across two in-plane electrodes under an alternating current field. As the sound is correlated with non-volatile remnant polarisation of the ferroelectric layer, the information is stored and retrieved after the liquid is removed, resulting in a sensing memory of the liquid. Our pad-type allows for identifying the position of a liquid. Flexible tube-type devices offer a route for in situ analysis of flowing liquids including a human serum liquid in terms of sound.
RESUMO
In addition to the demand for stimuli-responsive sensors that can detect various vital signals in epidermal skin, the development of electronic skin displays that quantitatively detect and visualize various epidermal stimuli such as the temperature, sweat gland activity, and conductance simultaneously are of significant interest for emerging human-interactive electronics used in health monitoring. Herein, a novel interactive skin display with epidermal stimuli electrode (ISDEE) allowing for the simultaneous sensing and display of multiple epidermal stimuli on a single device is presented. It is based on a simple two-layer architecture on a topographically patterned elastomeric polymer composite with light-emitting inorganic phosphors, upon which two electrodes are placed with a certain parallel gap. The ISDEE is directly mounted on human skin, which by itself serves as a field-responsive floating electrode of the display operating under an alternating current (AC). The AC field exerted on the epidermal skin layer depends on the conductance of the skin, which can be modulated based on a variety of physiological skin factors, such as the temperature, sweat gland activity, and pressure. Conductance-dependent field-induced electroluminescence is achieved, giving rise to an on-hand sensing display platform where a variety of human information can be directly sensed and visualized.