RESUMO
OBJECTIVE: To evaluate the accuracy of a 3-dimensionally (3D)-printed custom endoscopy port (3DEP) for minimally invasive cervical ventral slot decompression. STUDY DESIGN: Cadaveric study. ANIMALS: Fifteen cadavers of dogs weighing between 3.1 and 34.4 kg. METHODS: Minimally invasive cervical ventral slots were created using a 3DEP and an endoscopic system at the C3-C4 intervertebral disc space in each dog by 1 experienced and 1 inexperienced surgeon. Postoperative computed tomography was performed to compare the planned and postoperative screw trajectories (angle, entry point, exit point, and length of the screw entering the spinal canal) and quantify slot formation dimensions. RESULTS: Thirty screws were inserted in 30 vertebral bodies. Mean screw angle deviation was less than 2.5°, entry and exit point deviation was less than 1.6 mm, and length of the screw entering the spinal canal was less than 0.6 mm. No differences were identified between the experienced and inexperienced surgeons. Ventral slot length ratio was 30.15 ± 1.86 for the experienced surgeon and 29.38 ± 1.61 for the inexperienced surgeon (p = .372). The mean ventral slot width ratio was 45.60 ± 1.80 for the experienced surgeon and 47.20 ± 1.54 for the inexperienced surgeon (p = .261). CONCLUSION: Screw positioning and creation of ventral slots were accurately performed using the 3DEP by both inexperienced and experienced surgeons. CLINICAL SIGNIFICANCE: The use of a 3DEP for minimally invasive cervical ventral slot decompression may be an alternative to the conventional ventral slot in dogs. Additional studies are needed to evaluate efficacy and safety.
Assuntos
Doenças do Cão , Endoscopia , Humanos , Cães , Animais , Endoscopia/veterinária , Tomografia Computadorizada por Raios X/veterinária , Descompressão Cirúrgica/veterinária , Descompressão Cirúrgica/métodos , Cadáver , Vértebras Cervicais/cirurgia , Doenças do Cão/cirurgiaRESUMO
Indoor environment quality (IEQ) evaluation can help improve building satisfaction and productivity of residents. However, for more efficient analysis, it is necessary to gain a large amount of data on the differences between specific groups, such as building and resident work types. In this study, we conducted an IEQ evaluation for administrators and researchers, which are occupational groups of a research institute. The evaluation was conducted using quantitative and qualitative methods to find the relationships between IEQ satisfaction and work productivity for each job type. Our results showed that light environment and office layout were correlated with the work productivity of administrators, and light environment, office layout, thermal comfort, and sound environment were correlated with the work productivity of researchers. In addition, there was a significant difference in layout and thermal comfort items between administrators and researchers. Therefore, this study revealed significant differences in the effect of IEQ evaluation on work productivity between different occupations in a research institute.
Assuntos
Poluição do Ar em Ambientes Fechados , Desempenho Profissional , Poluição do Ar em Ambientes Fechados/análise , República da Coreia , Academias e Institutos , Ocupações , Satisfação no EmpregoRESUMO
BACKGROUND: As the frequency of spine surgery increases in the veterinary field, many studies have been conducted on minimally invasive spine surgery (MISS). Although many studies have been conducted on the thoracolumbar spine about MISS in animals, several problems and limitations have emerged regarding this method. Therefore, we developed a three-dimensional (3D) printed patient-specific surgical guide (3DPSSG) using 3D printing technology to overcome these problems. We aimed to evaluate the accuracy and safety of the 3DPSSG in minimally invasive mini-hemilaminectomy-corpectomy (MI-MHC). MI-MHC using 3DPSSG and an endoscopic system was performed at L1-L2 in 15 cadaveric dogs. The procedure of fixing the surgical guide to the vertebral body through screws and the surgical procedure using the guide were performed by two surgeons with different experiences. Postoperative computed tomography was used to measure planned and postoperative screw trajectories (angle, protruding from the far cortex) and to create 3D rendering images of vertebrae to evaluate the direction of bone window formation, corpectomy slot length, depth, and height ratio. RESULTS: The two groups which performed by two surgeons with different experiences did not differ in terms of screw angle deviation and length of the screw protruded from the far cortex. The corpectomy slot-length ratio was not different between the two groups; however, the slot-depth and height ratios were different. CONCLUSIONS: No differences were detected in screw trajectory and corpectomy slot-length ratio between the two groups. The 3DPSSG for MI-MHC is classified as accurate and safe; therefore, it can be an alternative to the conventional technique in dogs.
Assuntos
Doenças do Cão , Fusão Vertebral , Animais , Parafusos Ósseos , Cadáver , Doenças do Cão/cirurgia , Cães , Humanos , Imageamento Tridimensional , Impressão Tridimensional , Fusão Vertebral/métodos , Fusão Vertebral/veterináriaRESUMO
OBJECTIVE: To determine whether a tibial plateau leveling osteotomy (TPLO) performed with a customized 3D-printed guide and jig is more accurate than the traditional technique using a jig alone. STUDY DESIGN: In vitro study. SAMPLE POPULATION: Cadaveric canine pelvic limbs (n = 10) and 20 synthetic bone models. METHODS: Tibial plateau leveling osteotomy using a jig with (n = 10) and without (n = 10) a customized 3D-printed guide were performed in bone models, and TPLO using a jig with (n = 5) and without (n = 5) a customized 3D-printed guide were performed in cadaveric limbs. Angulation of the osteotomy, angulation of the proximal jig pin, angular/torsional deformity and medial cortex damage were measured from photographs of the specimens and compared. RESULTS: In the bone models, there were differences with and without the 3D guide for mean osteotomy inclination (-0.06° vs. -1.74°, P < .001), osteotomy torsion (5268 vs. 10 469 visible osteotomy pixels, P < .001), and medial cortical damage (2970 vs. 18 562 pixels, P < .001). In the cadaveric study, osteotomy inclination (-1.1° vs. 1.01°, P < .01), induced angular deformity (0.17° vs. -3.01°, P < .001) and angulation of the proximal jig pin (-0.27° vs. 0.80°, P < .001) differed between groups. CONCLUSION: The 3D-printed guide during TPLO resulted in slightly more accurate osteotomies and proximal jig pin placement, and reduced medial cortex damage. CLINICAL SIGNIFICANCE: A customized 3D-printed guide may improve intraoperative accuracy for TPLO, although the clinical significance of the small benefits is unknown.
Assuntos
Doenças do Cão , Tíbia , Animais , Cadáver , Doenças do Cão/cirurgia , Cães , Membro Posterior , Humanos , Osteotomia/métodos , Osteotomia/veterinária , Impressão Tridimensional , Tíbia/cirurgiaRESUMO
KRAS-mutant non-small cell lung cancer (NSCLC) is a major lung cancer subtype that leads to many cancer-related deaths worldwide. Although numerous studies on KRAS-mutant type NSCLC have been conducted, new oncogenic or tumor suppressive genes need to be detected because a large proportion of NSCLC patients does not respond to currently used therapeutics. Here, we show the tumor-promoting function of a cell cycle-related protein, PIERCE1, in KRAS-mutant NSCLC. Mechanistically, PIERCE1 depletion inhibits cell growth and AKT phosphorylation (pAKT) at S473, which is particularly observed in KRAS-mutant lung cancers. Analyses of AKT-related genes using microarray, immunoblotting, and real-time quantitative PCR indicated that PIERCE1 negatively regulates the gene expression of the AKT suppressor, TRIB3, through the CHOP pathway, which is a key regulatory pathway for TRIB3 expression. Similarly, in vivo analyses of PIERCE1 depletion in the KRAS mutation-related lung cancer mouse models revealed the suppressive effect of PIERCE1 knockout in urethane- and KRASG12D-induced lung tumorigenesis with decreased pAKT levels observed in the tumors. Tissue microarrays of human lung cancers indicated the expression of PIERCE1 in 83% of lung cancers and its correlation with pAKT expression. Thus, we illustrate how PIERCE1 depletion may serve as a therapeutic strategy against KRAS-mutant NSCLC and propose the clinical benefit of PIERCE1.
Assuntos
Proteínas de Ciclo Celular/deficiência , Transformação Celular Neoplásica/genética , Transformação Celular Neoplásica/metabolismo , Mutação , Proteínas Proto-Oncogênicas c-akt/metabolismo , Proteínas Proto-Oncogênicas p21(ras)/genética , Transdução de Sinais , Animais , Biomarcadores Tumorais , Carcinoma Pulmonar de Células não Pequenas/genética , Carcinoma Pulmonar de Células não Pequenas/metabolismo , Carcinoma Pulmonar de Células não Pequenas/mortalidade , Carcinoma Pulmonar de Células não Pequenas/patologia , Linhagem Celular Tumoral , Proliferação de Células , Modelos Animais de Doenças , Regulação Neoplásica da Expressão Gênica , Humanos , Neoplasias Pulmonares/genética , Neoplasias Pulmonares/metabolismo , Neoplasias Pulmonares/mortalidade , Neoplasias Pulmonares/patologia , Camundongos , Camundongos Knockout , Modelos Biológicos , PrognósticoRESUMO
New types of ruthenium catalysts were developed for the chelation-assisted intermolecular olefin hydroesterification that employs 2-pyridylmethyl formate as an ester source. Two classes of ligands, NHCs and phosphines, were found to facilitate the reaction delivering isomeric ester products (linear versus branched) with different ratios, thus allowing access to ligand-guided selective hydroesterification.
RESUMO
A procedure for the Cu-catalyzed hydrocyanation of alpha-aryl diazoesters has been developed using acetone cyanohydrin as a source of hydrogen cyanide (HCN). It was found that the addition of trimethylsilyl cyanide (TMSCN) significantly accelerates the conversion presumably by delivering free cyanide ion in situ, thus producing various types of alpha-aryl cyanoacetates in high yields under mild conditions.