RESUMO
BACKGROUND: A chloride test is an integral part of a basic metabolic panel that is essential for the assessment of a patient's acid-base and electrolyte status. While many methods are available commercially for the routine measurement of chloride, there is a need to address the accuracy and variability among the measurement results, especially with the prevalence of patients seeking treatment across different healthcare providers for alternative opinions. METHOD: A method based on sector field inductively coupled plasma isotope dilution mass spectrometry (SF-ICP-IDMS) was developed for the measurement of chloride in human serum. The SF-ICP-IDMS method was then used to assign the target values in the Health Sciences Authority (HSA) External Quality Assessment (EQA) Programme to evaluate the results of chloride test from participating clinical laboratories. RESULTS: The accuracy of the measurements was evaluated by comparing the results with the certified values of Electrolytes in Frozen Human Serum Certified Reference Materials (SRM 956c and SRM 956d) from the National Institute of Standards and Technology (NIST) at different chloride concentration levels. Over a five-year period from 2014-2018, the number of clinical laboratories which participated in the EQA Programme increased from 23 to 33. Comparison of robust means from the laboratories' results with our assigned target values revealed a reduction in relative deviation over time. The relationship between the deviation of each brand of clinical analysers and the chloride levels was established, where a larger deviation was uncovered at low chloride concentration. The SF-ICP-IDMS method was further demonstrated to be comparable with methods used by other metrology institutes in an international comparison organised by HSA under the auspice of the Consultative Committee for Amount of Substance - Metrology in Chemistry and Biology (CCQM). CONCLUSION: The use of metrologically traceable assigned target values enabled the study of method biasness from a small pool of dataset in each of the four brands of clinical analysers in HSA EQA Programme. This work underscores the need to improve the accuracy of chloride measurements by regular participation in an accuracy-based EQA Programme.
Assuntos
Cloretos , Laboratórios Clínicos , Eletrólitos , Humanos , Técnicas de Diluição do Indicador , Padrões de ReferênciaRESUMO
OBJECTIVES: Urine albumin is measured in clinical laboratories by immunoturbidimetry. However, large biases are observed among the different routine methods. To standardize the measurement of urine albumin, a reference measurement procedure (RMP) and urine albumin certified reference materials (CRMs) are needed. METHODS: A candidate RMP for urine albumin based on liquid chromatography-isotope dilution tandem mass spectrometry (LC-IDMS/MS) using human serum albumin as calibration standard was developed. Isotope-labeled human albumin was used as internal standard. Urine samples were digested using trypsin and eight resulting "signature" peptides of albumin were quantified by LC-IDMS/MS. The candidate RMP was employed in value assignment of external quality assessment (EQA) samples and certification of urine albumin reference materials. The commutability of the developed CRMs was assessed against patient samples. RESULTS: The candidate RMP (recovery 101.5-103.2% and CV 1.2-3.3% at about 7-40 mg/L) met optimal performance goal. The lower limit of quantification was 0.03 mg/L as determined by signal-to-noise method. The EQA results from clinical laboratories using different immunoturbidimetric methods were generally comparable with assigned target values determined by the candidate RMP, with albumin concentrations ranging from 5 to 226 mg/L. Urine albumin reference materials (two levels) certified using the candidate RMP showed good commutability in a preliminary study. CONCLUSIONS: With optimal method precision and trueness, as well as comparability with routine methods, the developed RMP may be used for value assignment of EQA samples or certification of reference materials, which are important pillars in urine albumin method standardization.
Assuntos
Laboratórios Clínicos , Espectrometria de Massas em Tandem , Albuminas , Certificação , Cromatografia Líquida , Humanos , Isótopos , Padrões de ReferênciaRESUMO
A systematic procedure for the determination of purity values of amino acid reference materials was developed by use of mass balance method where four categories of impurities (related structure impurities (RSIs), water, organic solvent residue (OSR), and non-volatile residue (NVR)) were quantified separately. The amount of RSIs was determined using a combination of three quantification methods. To ensure metrological traceability in the determination of RSIs, at least one such impurity in each candidate amino acid reference material was quantified using liquid chromatography-isotope dilution tandem mass spectrometry (LC-IDMS/MS). Other RSIs were determined using external calibration liquid chromatography-tandem mass spectrometry (LC-MS/MS) or o-phthaldialdehyde (OPA) derivatization, followed by liquid chromatography-ultraviolet (LC-UV) measurement. As the UV absorption of most RSIs came basically from the same chromophore after OPA derivatization, a relative peak area approach was used in the LC-UV method to quantify the amount of RSIs by comparing their peak areas with that of a reference RSI. The reference RSI was pre-selected and the amount determined by LC-IDMS/MS separately. The absence of D-amino acids was confirmed using Marfey's reagent derivatization, followed by LC-UV analysis. The amounts of water, OSR, and NVR were measured using Karl Fischer coulometry, gas chromatography-mass spectrometry (GC-MS) and thermogravimetry, respectively. By using this procedure, four amino acid (L-valine, L-leucine, L-isoleucine, and L-phenylalanine) certified reference materials (CRMs) were developed from the candidate materials. The homogeneity and stability of the CRMs were demonstrated by use of LC-IDMS/MS or OPA-LC-UV method, following the principles in ISO 17034 and ISO Guide 35.Graphical abstract.
Assuntos
Aminoácidos/análise , Aminoácidos/normas , Calibragem , Cromatografia Líquida/métodos , Colorimetria/métodos , Cromatografia Gasosa-Espectrometria de Massas/métodos , Conformação Proteica , Padrões de Referência , Espectrofotometria Ultravioleta/métodos , Espectrometria de Massas em Tandem/métodos , TermogravimetriaRESUMO
Over two decades, the Organic Analysis Working Group (OAWG) of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM) has organized a number of comparisons for clinically relevant small molecule organic biomarkers. The aim of the OAWG community is to be part of the coordinated international movement towards accuracy and comparability of clinical measurements that will, in turn, minimize the wastage of repeat testing and unnecessary therapy to create a sustainable healthcare industry. International and regional directives/requirements on metrological traceability of calibrators and control materials are in place. Metrology institutes worldwide maintain infrastructure for the practical realization of metrological traceability and demonstrate the equivalence of their measurement capabilities through participation in key comparisons organized under the auspices of the CCQM. These institutes provide certified reference materials, as well as other dedicated value-assignment services benefiting the in-vitro diagnostic (IVD) industry, reference (calibration) laboratories and the clinical chemistry laboratories. The roles of these services in supporting national, regional, and international activities to ensure the metrological traceability of clinical chemistry measurements are described. Graphical abstract.
Assuntos
Biomarcadores/análise , Compostos Orgânicos/análise , Bibliotecas de Moléculas Pequenas/análise , Calibragem , Testes de Química Clínica , Humanos , Técnicas In Vitro , Padrões de Referência , Reprodutibilidade dos TestesRESUMO
Testosterone in human serum is commonly tested in clinical laboratories using immunoassay methods as well as liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods. To standardize and ensure the accuracy of the measurement results, reference procedures with higher metrological order are required. A simple measurement procedure based on one-step liquid-liquid extraction (LLE) and liquid chromatography-isotope dilution tandem mass spectrometry (LC-IDMS/MS) was developed for total testosterone in human serum. The procedure involved serum spiked with 13C3-testosterone, equilibration for 2 h, and extraction with an organic solvent. Testosterone certified reference material (CRM) was used as the calibration standard to ensure the traceability to the International System of Units (SI). Testosterone in serum CRMs from the National Institute for Standards and Technology (NIST) and LGC were used to validate the accuracy of the newly developed method. The deviations of the obtained values from the NIST and LGC certified values ranged from -0.55% to 0.45%. Similarly, the coefficient of variations (CVs) of the replicate measurements were in the range of 0.55% and 0.78%, respectively. The relative expanded uncertainties were comparable with those of the certified materials. The newly developed LC-IDMS/MS procedure demonstrated adequate trueness and precision, and was simple to perform. The method can be used for value assignment of testosterone in external quality assessment (EQA) materials as well as certification of CRMs in the future. Graphical abstract.
Assuntos
Extração Líquido-Líquido/métodos , Espectrometria de Massas em Tandem/métodos , Testosterona/sangue , Calibragem , Cromatografia Líquida/métodos , Humanos , Técnicas de Diluição do Indicador , Isótopos , Padrões de Referência , Reprodutibilidade dos Testes , Testosterona/normas , IncertezaRESUMO
Background The measurement of hemoglobin A1c (HbA1c) is important for diagnosing diabetes mellitus as well as assessing glycemic control in diabetic patients. Commutable whole blood certified reference materials (CRMs) are needed in the measurement of HbA1c for method validation and/or as quality controls. Methods We developed three levels of hemolyzed whole blood CRMs for HbA1c. The certified values were determined using liquid chromatography-isotope dilution tandem mass spectrometry method (LC-IDMS/MS) where two "signature" hexapeptides of HbA1c and hemoglobin A0 (HbA0) were used as the calibration standards. The concentrations of the hexapeptide solutions were determined by amino acid analysis by the LC-IDMS/MS method using amino acid CRMs as the calibration standards. The commutability study was conducted by measuring 25 patient specimens and the whole blood CRMs by both LC-IDMS/MS method and various routine methods using six different clinical analyzers. Results The certified values were determined to be 35.1±2.0, 50.3±1.9 and 65.8±2.6 mmol/mol, respectively. These CRMs showed good commutability on five of the six clinical analyzers but showed poor commutability on one of the clinical analyzers that used similar method as two other analyzers where good commutability was observed. Conclusions With certified target values based on metrological traceability and good commutability on most of the clinical analyzers, the developed whole blood CRMs can be used for method validation or as quality control materials in the measurement of HbA1c. The commutability study results also underscored the need of commutability testing of clinical CRMs using various clinical analyzers.
Assuntos
Hemoglobinas Glicadas/análise , Análise Química do Sangue/normas , Cromatografia Líquida , Hemoglobinas Glicadas/química , Humanos , Estabilidade Proteica , Padrões de Referência , Espectrometria de Massas em TandemRESUMO
A gas chromatography-isotope dilution mass spectrometry (GC-IDMS) technique was developed for the quantification of two heavy polyaromatic hydrocarbons (PAHs), benz[a]anthracene and benzo[a]pyrene, in yerba maté tea (maté). The optimisation of two extraction methods, namely liquid-liquid extraction and accelerated solvent extraction, was carried out. Both optimised methods were validated using a certified reference material of fine dust and the results were within the expanded uncertainties at 95% confidence level. Recoveries of 99.2-106.7% with RSD of measurements of 1.1-2.3% were achieved for benz[a]anthracene. Recoveries of 95.7-101.9% with RSD of measurements of 0.4-1.4% were achieved for benzo[a]pyrene. The validated methods were applied for the extraction of benz[a]anthracene and benzo[a]pyrene in maté powder from NIST. A metrological approach was undertaken to ensure the traceability of measurement results. The uncertainties associated with the results were rigorously evaluated and also reported herein. Graphical abstract Quantification of benz[a]anthracene and benzo[a]pyrene using IDMS.
Assuntos
Benzo(a)Antracenos/análise , Benzo(a)pireno/análise , Ilex paraguariensis/química , Extração Líquido-Líquido/métodos , Espectrometria de Massas/métodos , Chás de Ervas/análise , Benzo(a)Antracenos/isolamento & purificação , Benzo(a)pireno/isolamento & purificação , Isótopos de Carbono/análise , Isótopos de Carbono/isolamento & purificação , Contaminação de Alimentos/análise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Técnicas de Diluição do IndicadorRESUMO
High accuracy methods were developed for the measurements of calcium, potassium, iron and magnesium in human serum using standard addition and isotope dilution mass spectrometry methods. The results were comparable to those obtained by other national metrology institutes and designated institutes as demonstrated in an inter-laboratory comparison. The methods were then adopted for the assignment of reference values in a human serum material and the uncertainties associated with the certified values were obtained by combining the uncertainty components from the characterisation, homogeneity and long-term stability of the materials. The certified values are traceable to the International System of Units and the material can be used by the clinical testing laboratories to validate their methods or as a quality control material to improve the accuracy of their measurements.
Assuntos
Cálcio/sangue , Ferro/sangue , Magnésio/sangue , Potássio/sangue , Controle de Qualidade , Humanos , Espectrometria de Massas/instrumentaçãoRESUMO
To achieve fast and accurate analysis of carbamazepine in surface water, we developed a novel porous membrane-protected micro-solid-phase extraction (µ-SPE) method, followed by liquid chromatography-isotope dilution tandem mass spectrometry (LC-IDMS/MS) analysis. The µ-SPE device (â¼0.8 × 1 cm) was fabricated by heat-sealing edges of a polypropylene membrane sheet to devise a bag enclosing the sorbent. The analytes (both carbamazepine and isotope-labelled carbamazepine) were first extracted by µ-SPE device in the sample (10 mL) via agitation, then desorbed in an organic solvent (1 mL) via ultrasonication. Several parameters such as organic solvent for pre-conditioning of µ-SPE device, amount of sorbent, adsorption time, and desorption solvent and time were investigated to optimize the µ-SPE efficiency. The optimized method has limits of detection and quantitation estimated to be 0.5 ng L(-1) and 1.6 ng L(-1), respectively. Surface water samples spiked with different amounts of carbamazepine (close to 20, 500, and 1600 ng L(-1), respectively) were analysed for the validation of method precision and accuracy. Good precision was obtained as demonstrated by relative standard deviations of 0.7% for the samples with concentrations of 500 and 1600 ng kg(-1), and 5.8% for the sample with concentration of 20 ng kg(-1). Good accuracy was also demonstrated by the relative recoveries in the range of 96.7%-103.5% for all samples with uncertainties of 1.1%-5.4%. Owing to the same chemical properties of carbamazepine and isotope-labelled carbamazepine, the isotope ratio in the µ-SPE procedure was accurately controlled. The use of µ-SPE coupled with IDMS analysis significantly facilitated the fast and accurate measurement of carbamazepine in surface water.
Assuntos
Anticonvulsivantes/análise , Carbamazepina/análise , Membranas Artificiais , Microextração em Fase Sólida/métodos , Espectrometria de Massas em Tandem/métodos , Poluentes Químicos da Água/análise , Adsorção , Limite de Detecção , Porosidade , Reprodutibilidade dos Testes , IncertezaRESUMO
Isotope dilution mass spectrometry and standard addition techniques were developed for the analysis of four elements (Ca, As, Cd and Pb) in a mushroom powder material. Results from the validated methods were compared to those of other national metrology institutes in the CCQM-K89 intercomparisons and the results were in excellent agreement with the reference values. The same methods were then used for the assignment of reference values to a mushroom powder Certified Reference Material (CRM). The certified values obtained for Ca, As, Cd and Pb were 1.444 ± 0.099 mg/g, 5.61 ± 0.59 mg/kg, 1.191 ± 0.079 mg/kg and 5.23 ± 0.94 mg/kg, respectively. The expanded measurement uncertainties were obtained by combining the uncertainty contributions from characterization (uchar) and between-bottle homogeneity (ubb).
Assuntos
Agaricales/química , Arsênio/análise , Cádmio/análise , Cálcio/análise , Chumbo/análise , Espectrometria de Massas/métodos , Pós , Padrões de ReferênciaRESUMO
The development of reference measurement methods for hemoglobin A1c (HbA1c) is important for quality assurance in diabetes management. The IFCC reference method using purified proteins as calibration standards is the recommended accuracy-based reference method for the standardization of HbA1c measurement. We developed a highly precise and accurate liquid chromatography-isotope-dilution tandem mass spectrometry (LC-IDMS/MS) procedure, which can serve as an alternative accuracy-based method for HbA1c measurement. In this method, enzymatic proteolysis was applied to sample preparation, followed by LC-IDMS/MS measurement of hemoglobin A0 (HbA0) and HbA1c, using two "signature" hexapeptides for calibration. The concentrations of the signature hexapeptide calibration solutions were, in turn, determined using a hydrolysis method with HCl, followed by LC-IDMS/MS measurement using amino acid solutions as calibration standards. These solutions were gravimetrically prepared from pure amino acid certified reference materials (CRMs). The developed LC-IDMS/MS method was used in participation in an IFCC ring trial for reference laboratories (RELA 2013 and 2014) for HbA1c, where our results were compared with those using the IFCC reference method. The deviations were found to be 0.4-1.7 mmol mol(-1) [or 0.04-0.16% in National Glygohemoglobin Standardization Program (NGSP) units], revealing good comparability with the IFCC reference method. The relative expanded uncertainty of the LC-IDMS/MS was in the range of 2.6% to 2.8% (1.6% to 2.2% after converting to NGSP units). With excellent method precision, good comparability with the IFCC reference method, and a small measurement uncertainty, the developed LC-IDMS/MS method may be used as an alternative accuracy-based reference method for HbA1c measurement.
Assuntos
Hemoglobinas Glicadas/análise , Espectrometria de Massas em Tandem/métodos , Aminoácidos/análise , Cromatografia Líquida/métodos , Humanos , Técnicas de Diluição do Indicador , Marcação por Isótopo/métodos , Limite de Detecção , Modelos Moleculares , ProteóliseRESUMO
BACKGROUND: Free glycerol in human serum is measured in clinical laboratories using enzymatic methods, which can be affected by interferences from biological samples. These methods are not applicable when stable isotopic tracers are used to determine lipid kinetics. Hence, a reference measurement procedure for free glycerol in human serum is needed. METHODS: A reference measurement procedure based on two-step gas chromatography-isotope dilution mass spectrometry (GC-IDMS) was developed for the measurement of free glycerol in human serum. This procedure involved spiking with (13)C3-glycerol, protein precipitation and cation exchange SPE, followed by two-step derivatization with 1-butylboronic acid and N-methyl-N-trimethylsilyltrifluoroacetamide. Tripalmitin certified reference material (CRM) was used as the calibration standard to ensure metrological traceability. RESULTS: Good precision and accuracy were obtained as demonstrated by relative standard deviation (RSD) of 1.51%-3.33%, with average recoveries over 98%. The relative measurement uncertainty was below 3% with major contributions from the concentration of glycerol calibration solution, choice of ion pair, linear regression, and measurement precision. CONCLUSIONS: With good accuracy and precision, as well as clear metrological traceability, the developed GC-IDMS procedure is useful in producing traceable and accurate measurement of free glycerol in human serum.
Assuntos
Cromatografia Gasosa-Espectrometria de Massas/métodos , Glicerol/sangue , Calibragem , Humanos , Técnicas de Diluição do Indicador , Padrões de Referência , Soluções , IncertezaRESUMO
Determination of total thyroxine in human serum using hollow fiber liquid-phase microextraction (HF-LPME) has been accomplished for the first time. HF-LPME serves as an inexpensive sample pretreatment and the cleanup method that is nearly solvent-free. Thyroxine was extracted through a water immiscible organic solvent immobilized in the wall pores of a polypropylene hollow fiber into 20µl of an aqueous acceptor phase inside the lumen of the hollow fiber. This technique produced extracts that had comparable cleanness with those obtained using solid-phase extraction (SPE). Serum samples with endogenous thyroxine were spiked with isotopically-labeled thyroxine and analyzed by liquid chromatography-tandem mass spectrometry after HF-LPME extraction. Extraction parameters including the organic phase, acid/base concentration of acceptor phase, stirring speed and extraction time were optimized. The calibration range was found to be linear over 1-1000ng/g with the limit of detection (LOD) of 0.3 ng/g. For quantification of total thyroxine in human serum, 6 subsamples were prepared and the results indicated very good precision with a relative standard deviation of <1.3%. The difference from the SPE method was less than 1.2%, with independent t-test showing insignificant bias. Two reference materials of human serum were analyzed, and our obtained values were compared with the reference values. The results showed very good precision with RSD around 0.2% and the deviation from the reference values were -3.1% and -2.1%. The newly developed method is precise, accurate, inexpensive, and environmentally friendly.
Assuntos
Cromatografia Líquida/métodos , Microextração em Fase Líquida/métodos , Espectrometria de Massas em Tandem/métodos , Tiroxina/sangue , Calibragem , Isótopos de Carbono , Humanos , Microextração em Fase Líquida/instrumentação , Polipropilenos/química , Valores de Referência , Reprodutibilidade dos Testes , Tiroxina/isolamento & purificaçãoRESUMO
BACKGROUND: Triglycerides are widely tested in clinical laboratories using enzymatic methods for lipid profiling. As enzymatic methods can be affected by interferences from biological samples, this together with the non-specific nature of triglycerides measurement makes it necessary to verify the accuracy of the test results with a reference measurement procedure. Several such measurement procedures had been published. These procedures generally involved lengthy and laborious sample preparation steps. In this paper, an improved reference measurement procedure for triglycerides and total glycerides was reported which simplifies the sample preparation steps and greatly shortens the time taken. METHODS: The procedure was based on isotope dilution gas chromatography-mass spectrometry (IDGC-MS)with tripalmitin as the calibration standard. Serum samples were first spiked with isotope-labeled tripalmitin. For the measurement of triglycerides, the serum samples were subjected to lipid extraction followed by separation of triglycerides from diglycerides and monoglycerides. Triglycerides were then hydrolyzed to glycerol, derivatized and injected into the GCMS for quantification. For the measurement of total glycerides, the serum samples were hydrolyzed directly and derivatized before injection into the GC-MS for quantification. RESULTS: All measurement results showed good precision with CV <1%. A certified reference material (CRM) of lipids in frozen human serum was used to verify the accuracy of the measurement. The obtained values for both triglycerides and total glycerides were well within the certified ranges of the CRM, with deviation <0.4% from the certified values. The relative expanded uncertainties were also comparable with the uncertainties associated with the certified values of the CRM. The validated procedure was used in an External Quality Assessment (EQA) Program organized by our laboratory to establish the assigned values for triglycerides and total glycerides.
Assuntos
Cromatografia Gasosa-Espectrometria de Massas/métodos , Glicerídeos/sangue , Triglicerídeos/sangue , Isótopos de Carbono , Cromatografia Gasosa-Espectrometria de Massas/normas , Humanos , Técnica de Diluição de Radioisótopos , Padrões de ReferênciaRESUMO
A high-accuracy double isotope dilution mass spectrometric method using an exact matching approach with GC coupled to a mass spectrometer for the analysis of cyanuric acid in fortified milk powder was developed. Various parameters for sample clean-up such as the type of SPE cartridge, GC column and type of derivatizing agent used were investigated. The method was found to be linear in the concentration range of 0.03 to 2 mg/kg of cyanuric acid in milk powder. LOD and LOQ were found to be 0.9 and 3 µg/kg, respectively. Recoveries in the range of 95.7 to 102.2% were obtained for the in-house fortified milk powder samples, with RSD of measurements in the range of 0.2 to 3.0%. A metrological approach was undertaken to examine all possible biases that contributed to the combined measurement uncertainty of the method. This high-accuracy method can serve as a reference method for techniques commonly applied in routine testing laboratories.
Assuntos
Contaminação de Alimentos/análise , Alimentos Fortificados/análise , Espectrometria de Massas/métodos , Leite/química , Triazinas/análise , Animais , Isótopos de Carbono/análise , Bovinos , Espectrometria de Massas/instrumentação , Isótopos de Nitrogênio/análiseRESUMO
BACKGROUND: An isotope dilution mass spectrometry (IDMS) technique has been developed for high accuracy analysis of glucose in human serum. Currently, all the IDMS methods for glucose analysis are based on gas chromatography-mass spectrometry (GC-MS). In this study, isotope dilution liquid chromatography-tandem mass spectrometry (ID LC-MS/MS) was investigated. METHODS: NIST SRM 965b glucose in frozen human serum was analyzed by linear regression IDMS based on both LC-MS/MS and GC-MS. Serum samples were spiked with isotope labeled glucose and deproteinized by acetonitrile. For LC-MS/MS measurement, the supernate was injected directly after filtration and dilution. For GC-MS measurement, the supernate was evaporated to dryness and went through a two-step derivatization before injection. RESULTS: All measurements had good precision with CVs of <1%. Results from GC-MS agreed very well with results from LC-MS/MS, with a difference of <0.7%. The final reporting values in this study, based solely on LC-MS/MS, were within the certified ranges. The relative expanded uncertainties were within the range of 1.37% to 1.69% for the 4 levels of glucose, which were comparable with uncertainties from the certificate. CONCLUSIONS: The IDMS method based on LC-MS/MS is precise and accurate. It does not require lengthy derivatization steps and thus, greatly simplifies the sample preparation procedure.
Assuntos
Cromatografia Líquida/métodos , Glucose/análise , Espectrometria de Massas em Tandem/métodos , Calibragem , Humanos , Técnicas de Diluição do Indicador , Padrões de Referência , IncertezaRESUMO
A GC-high-resolution isotope dilution MS (IDMS) method for the quantification of melamine in milk powder is described. The developed technique is compared to the LC-IDMS/MS technique, typically used for the determination of melamine in various matrices. The accuracy of the GC-high-resolution IDMS method was demonstrated when a small degree of equivalence was obtained in a regional comparative study involving the determination of melamine in milk powder.