Feasibility evaluation of near dissolved organic matter microfiltration (NDOM MF) for the efficient removal of microplastics in the water treatment process.

Microfiltration (MF) using membranes with a mean pore size smaller than 0.45 µm has generally been used for particle removal from water, given that materials larger and smaller than 0.45 µm are regarded as particulates and dissolved organic matter (DOM), respectively. It is also the case for removing small-size microplastics (MPs). However, given their sizes (ca. 1 µm), there is room for further improvement of the productivity (i.e., water flux) in the pore size range of 0.45-1 µm on the condition that the removal rate is maintained. With this in mind, MF's water flux and removal rate were tested using seven different MF membranes, and the right pore, with the size of 0.8 µm, was found for MP removal, which is called near DOM (NDOM) MF. In the filtration test using polystyrene surrogate beads with an average particle diameter of 1.20 µm, NDOM MF exhibited a 1.7 to 13 times higher permeate flux than the conventional MF using 0.1, 0.2, and 0.45 µm membranes while maintaining a higher removal rate than 2 log. The excellent removal rate of the NDOM MF was attributable to the following three factors: (1) smaller mean pore size than the average particle diameter, (2) particle screening effect enhanced by the secondary layer formed by surface deposition, and (3) 3D mesh sublayer structure favorable for capturing penetrated particles. Furthermore, the outstanding filtration performance also appeared in a low-temperature (< 10°C) process, demonstrating that NDOM MF is feasible independently of temperature. Additionally, in constant flux filtration, NDOM MF demonstrated the long-term feasibility by lowering the transmembrane pressure and specific filtration energy by more than 2 times.

Near dissolved organic matter microfiltration (NDOM MF) coupled with UVC LED disinfection to maximize the efficiency of water treatment for the removal of Giardia and Cryptosporidium.

Microfiltration (MF) membranes with a mean pore size same as or smaller than 0.45 µm have been typically used to separate pathogenic protozoa in water since materials larger than 0.45 µm are considered particulates. However, 0.45 µm is too small to separate protozoa which are 4-6 µm (Cryptosporidium oocyst) or 8-15 µm (Giardia cyst) in size. In this study, we optimized the mean pore size of MF membranes to maximize the producibility and guarantee a high removal rate simultaneously and proposed the membrane filtration using an MF membrane with an optimum mean pore size larger than but close to dissolved organic matter (DOM), which is called near DOM MF (NDOM MF). According to the MF test using polystyrene surrogate beads with diameters of 3 and 8 µm, an MF membrane with a 0.8 µm mean pore size was the best in that it showed 52% to 146% higher water fluxes than a 0.45 µm MF membrane while maintaining the removal rate at 3-4 log. It was also the case for a low-temperature MF test, revealing the NDOM MF is highly effective regardless of temperature changes. Lastly, we tried to find the possibility of combining the NDOM MF with disinfection by an ultraviolet light emitting diode (UVC LED) to further guarantee the high quality of treated water while providing high process efficiency.

Zero Discharge of Dyes and Regeneration of a Washing Solution in Membrane-Based Dye Removal by Cold Plasma Treatment.

Although dye removal from wastewater streams has been investigated via several approaches using adsorbents, resins, or membranes, it is still hard to avoid the fact that dyes are persistently left in the adsorption materials or washing solutions used to regenerate the used adsorbents. In particular, given that cleaning agents are composed of acid/base, organic solvents, or electrolytes, dye adsorption and adsorbent regeneration processes leave behind more hard-to-manage wastewater containing dyes. In this study, we demonstrated that cold plasma (CP) treatment, which is one of the advanced oxidation processes (AOPs), can be used for zero discharge of dyes and regeneration of a washing solution in a membrane-based dye removal process. Specifically, CP treatment was found to successfully remove dyes released from a washing process to regenerate a used membrane, thereby effectively recycling a cleaning solution. As a result, the regenerated washing solution was more favorable for the adsorbed dyes' elution, leading to the successful regeneration of a used membrane without a significant loss of dye removal efficiency. This fact was evidenced by a comparative study on the effect of CP treatment on the reusability of membranes and washing solutions and the kinetic analysis of the AOP of the desorbed dyes. We hope that this study contributes to opening a new door for environmentally friendly and sustainable dye removal.