Current Trends in RNA Virus Detection via Nucleic Acid Isothermal Amplification-Based Platforms.

Ribonucleic acid (RNA) viruses are one of the major classes of pathogens that cause human diseases. The conventional method to detect RNA viruses is real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR), but it has some limitations. It is expensive and time-consuming, with infrastructure and trained personnel requirements. Its high throughput requires sophisticated automation and large-scale infrastructure. Isothermal amplification methods have been explored as an alternative to address these challenges. These methods are rapid, user-friendly, low-cost, can be performed in less specialized settings, and are highly accurate for detecting RNA viruses. Microfluidic technology provides an ideal platform for performing virus diagnostic tests, including sample preparation, immunoassays, and nucleic acid-based assays. Among these techniques, nucleic acid isothermal amplification methods have been widely integrated with microfluidic platforms for RNA virus detection owing to their simplicity, sensitivity, selectivity, and short analysis time. This review summarizes some common isothermal amplification methods for RNA viruses. It also describes commercialized devices and kits that use isothermal amplification techniques for SARS-CoV-2 detection. Furthermore, the most recent applications of isothermal amplification-based microfluidic platforms for RNA virus detection are discussed in this article.

An outlook on the versatility of plant saponins: A review.

The abundance of saponin-rich plants across different ecosystems indicates their great potential as a replacement for harmful synthetic surfactants in modern commercial products. These organic saponins have remarkable biological and surface-active properties and align with sustainable and eco-friendly practices. This article examines and discusses the structure and properties of plant saponins with high yield of saponin concentrations and their exploitable applications. This highlights the potential of saponins as ethical substitutes for traditional synthetic surfactants and pharmacological agents, with favorable effects on the economy and environment. For this purpose, studies on the relevant capabilities, structure, and yield of selected plants were thoroughly examined. Studies on the possible uses of the selected saponins have also been conducted. This in-depth analysis highlights the potential of saponins as workable and ethical replacements for traditional synthetic medications and surfactants, thus emphasizing their favorable effects on human health and the environment.

Protective effect of the mixture of Lactiplantibacillus plantarum KC3 and Leonurus Japonicas Houtt extract on respiratory disorders.

Air pollutants, such as particulate matter (PM) and diesel exhaust particles (DEP), are associated with respiratory diseases. Therefore, preventive and therapeutic strategies against PM-and DEP (PM10D)-induced respiratory diseases are needed. Herein, we evaluate the protective effects of a mixture of Lactiplantibacillus plantarum KC3 and Leonurus Japonicas Houtt (LJH) extract against airway inflammation associated with exposure to PM10D. To determine the anti-inflammatory effects of the LJH extract, reactive oxygen species (ROS) production and the expression of inflammatory pathways were determined in PM10-induced MH-S cells. For the respiratory protective effects, BALB/c mice were exposed to PM10D via intranasal injection, and a mixture of L. plantarum KC3 and LJH extract was administered orally for 12 days. LJH extract inhibited ROS production and the phosphorylation of downstream factors of NF-κB in PM10-stimulated MH-S cells. The mixture of L. plantarum KC3 and LJH repressed the infiltration of neutrophils, reduced the immune cells number, and suppressed the proinflammatory mediators and cyclooxygenase (COX)-2 expressions in PM10D-induced airway inflammation with reduced phosphorylation of downstream factors of NF-κB. In addition, these effects were not observed in an alveolar macrophage depleted PM10D-induced mouse model using clodronate liposomes. The extract mixture also regulated gut microbiota in feces and upregulated the mRNA expression of Foxp3, transforming growth factor (TGF)-ß1, and interleukin (IL)-10 in the colon. The L. plantarum KC3 and LJH extract mixture may inhibit alveolar macrophage- and neutrophil-mediated inflammatory responses and regulate gut microbiota and immune response in PM10D-induced airway inflammation, suggesting it is a potential remedy to prevent and cure airway inflammation and respiratory disorders.

Plant Extract-Derived Carbon Dots as Cosmetic Ingredients.

Plant extract-derived carbon dots (C-dots) have emerged as promising components for sustainability and natural inspiration to meet consumer demands. This review comprehensively explores the potential applications of C-dots derived from plant extracts in cosmetics. This paper discusses the synthesis methodologies for the generation of C-dots from plant precursors, including pyrolysis carbonization, chemical oxidation, hydrothermal, microwave-assisted, and ultrasonic methods. Plant extract-derived C-dots offer distinct advantages over conventional synthetic materials by taking advantage of the inherent properties of plants, such as antioxidant, anti-inflammatory, and UV protective properties. These outstanding properties are critical for novel cosmetic applications such as for controlling skin aging, the treatment of inflammatory skin conditions, and sunscreen. In conclusion, plant extract-derived C-dots combine cutting-edge nanotechnology and sustainable cosmetic innovation, presenting an opportunity to revolutionize the industry by offering enhanced properties while embracing eco-friendly practices.

A Bioactive Compound-Loaded Zinc-Aminoclay Encapsulated, Pickering Emulsion System for Treating Acne-Inducing Microbes.

Acne is a common skin condition caused by the growth of certain bacteria. Many plant extracts have been investigated for their potential to combat acne-inducing microbes, and one such plant extract is microwave-assisted Opuntia humifusa extract (MA-OHE). The MA-OHE was loaded onto zinc-aminoclay (ZnAC) and encapsulated in a Pickering emulsion system (MA-OHE/ZnAC PE) to evaluate its therapeutic potential against acne-inducing microbes. Dynamic light scattering and scanning electron microscopy were used to characterize MA-OHE/ZnAC PE with a mean particle diameter of 353.97 nm and a PDI of 0.629. The antimicrobial effect of MA-OHE/ZnAC was evaluated against Staphylococcus aureus (S. aureus) and Cutibacterium acnes (C. acnes), which contribute to acne inflammation. The antibacterial activity of MA-OHE/ZnAC was 0.1 and 0.025 mg/mL to S. aureus and C. acnes, respectively, which were close to naturally derived antibiotics. Additionally, the cytotoxicity of MA-OHE, ZnAC, and MA-OHE/ZnAC was tested, and the results showed that they had no cytotoxic effects on cultured human keratinocytes in a range of 10-100 µg/mL. Thus, MA-OHE/ZnAC is suggested to be a promising antimicrobial agent for treating acne-inducing microbes, while MA-OHE/ZnAC PE is a potentially advantageous dermal delivery system.

Simultaneous enhancement of lipid biosynthesis and solvent extraction of Chlorella using aminoclay nanoparticles.

Magnesium aminoclay nanoparticles (MgANs) exert opposing effects on photosynthetic microalgae by promoting carbon dioxide (CO2) uptake and inducing oxidative stress. This study explored the potential application of MgAN in the production of algal lipids under high CO2 concentrations. The impact of MgAN (0.05-1.0 g/L) on cell growth, lipid accumulation, and solvent extractability varied among three tested oleaginous Chlorella strains (N113, KR-1, and M082). Among them, only KR-1 exhibited significant improvement in both total lipid content (379.4 mg/g cell) and hexane lipid extraction efficiency (54.5%) in the presence of MgAN compared to those of controls (320.3 mg/g cell and 46.1%, respectively). This improvement was attributed to the increased biosynthesis of triacylglycerols and a thinner cell wall based on thin-layer chromatography and electronic microscopy, respectively. These findings suggest that using MgAN with robust algal strains can enhance the efficiency of cost-intensive extraction processes while simultaneously increasing the algal lipid content.

Evaluation of Health Economic Loss Due to Particulate Matter Pollution in the Seoul Subway, South Korea.

Evaluating an illness's economic impact is critical for developing and executing appropriate policies. South Korea has mandatory national health insurance in the form of NHIS that provides propitious conditions for assessing the national financial burden of illnesses. The purpose of our study is to provide a comprehensive assessment of the economic impact of PM2.5 exposure in the subway and a comparative analysis of cause-specific mortality outcomes based on the prevalent health-risk assessment of the health effect endpoints (chronic obstructive pulmonary disease (COPD), asthma, and ischemic heart disease (IHD)). We used the National Health Insurance database to calculate the healthcare services provided to health-effect endpoints, with at least one primary diagnosis in 2019. Direct costs associated with health aid or medicine, treatment, and indirect costs (calculated based on the productivity loss in health effect endpoint patients, transportation, and caregivers, including morbidity and mortality costs) were both considered. The total cost for the exposed population for these endpoints was estimated to be USD 437 million per year. Medical costs were the largest component (22.08%), followed by loss of productivity and premature death (15.93%) and other costs such as transport and caregiver costs (11.46%). The total incurred costs (per 1000 persons) were accounted to be USD 0.1771 million, USD 0.42 million, and USD 0.8678 million for COPD, Asthma, and IHD, respectively. Given that the economic burden will rise as the prevalence of these diseases rises, it is vital to adopt effective preventative and management methods strategies aimed at the appropriate population.

Antioxidants for improved skin appearance: Intracellular mechanism, challenges and future strategies.

Recent advances in molecular and biochemical processes relevant to the skincare field have led to the development of novel ingredients based on antioxidants that can improve skin health and youthfulness. Considering the plethora of such antioxidants and the many implications for the skin's appearance, this review focuses on describing the critical aspects of antioxidants, including cosmetic functions, intracellular mechanisms and challenges. In particular, specialized substances are suggested for the treatment of each skin condition, such as skin ageing, skin dehydration and skin hyperpigmentation, which treatments can maximize effectiveness and avoid side effects during skin care processes. In addition, this review proposes advanced strategies that either already exists in the cosmetic market or should be developed to improve and optimize cosmetic' beneficial effects.

Les progrès récents des processus moléculaires et biochimiques pertinents pour le domaine des soins de la peau ont conduit au développement de nouveaux ingrédients à base d'antioxydants qui peuvent améliorer la santé et la jeunesse de la peau. Compte tenu de la pléthore de ces antioxydants et des nombreuses implications pour l'apparence de la peau, cette revue se concentre sur la description des aspects critiques des antioxydants, pour le domaine de la cosmétique, pour les mécanismes intracellulaires et les défis à surmonter. En particulier, des substances spécialisées sont suggérées pour le traitement de chaque affection cutanée, comme le vieillissement cutané, la déshydratation cutanée et l'hyperpigmentation cutanée, lesquels traitements peuvent maximiser l'efficacité et éviter les effets secondaires pendant les processus de soins de la peau. De plus, cette revue propose des stratégies avancées qui existent déjà sur le marché des cosmétiques ou qui devraient être développées pour améliorer et optimiser les effets bénéfiques des cosmétiques.

Beneficial Effects of Opuntia humifusa (Korean Cheonnyuncho) on Human Health Based on Antioxidant Properties: Systematic Review and Meta-Analysis.

In this study, a systematic review and meta-analysis are conducted to evaluate the medical applications of Opuntia humifusa (OH). A total of 171 articles are peer-reviewed; however, only 15 individual studies were included after the manual screening to eliminate unnecessary studies. A comparative standardized means difference (SMD) between the OH and control groups is used as a parameter to demonstrate the beneficial effects of OH for skin aging, cancer, and diabetes treatments based on its antioxidant activities. The OH treatment exhibits positive results in improving collagen synthesis and demonstrates that it is nontoxic to normal human cells without analytical heterogeneity (SMD = 1.18 [0.11, 2.26] and I2 = 0%). Moreover, the results confirm the effectiveness of OH treatment on downregulatory cancers in terms of decreased cancer cell proliferation and tumor weight and increased numbers of cancer cells in the apoptosis phase (pooled SMD = -1.17 [-1.72, -0.62]). However, this comparison does not yield a statistically significant result (I2 = 69%). Additionally, the OH treatment is found to reduce the symptoms of diabetes in diabetic rats, particularly by lowering glucose and triglyceride levels and increasing high-density lipoprotein cholesterol levels. This study suggests that OH extracts are helpful for the prevention of human diseases and might be potential candidates for future medicines.

Battery-Free and Real-Time Wireless Sensor System on Marine Propulsion Shaft Using a Wireless Power Transfer Module.

In this paper, we present a wireless sensor system (WSS) that integrated an inductive wireless power transfer (I-WPT) module for battery-free real-time monitoring of the status of rotating shaft in ships. Firstly, an optimized I-WPT module for seamless power supply was implemented using multiple Tx and Rx coils, and its power capability of 1.75 W with an efficiency of 75% was achieved. Secondly, as a result of the high-power transfer performance of the implemented I-WPT module, an entire WSS that integrated four sensors was designed on the rotary shaft. Finally, the designed WSS was installed on a small-scale test bench system with a shaft diameter of 200 mm; it was demonstrated that the status of a propulsion shaft could be monitored in real time without a battery.

Utilization of light-emitting diodes for skin therapy: Systematic review and meta-analysis.

This study investigates the dermatological as well as the esthetic potential of light-emitting diodes (LEDs) by performing a systematic review and meta-analysis. From the electronic databases, 554 articles were assessed; however, only 31 studies were selected after manually screening and eliminating unnecessary studies. The potential effectiveness of LEDs for skin therapies was assessed by evaluating the standardized mean differences (SMDs) and funnel plots of this meta-analysis. It was discovered that both red and blue LED lights play an important role in the treatment of acne vulgaris with an overall statistically significant SMD of -2.42 [-2.64, -2.15] and I2  = 17% < 50%. Additionally, other LEDs (e.g., yellow LEDs and near-infrared devices) showed outstanding levels of effectiveness, not only in reducing the lesions of herpes simplex and psoriasis but also in improved skin rejuvenation with highly consistent analytical results (I2  = 0% and 33%, respectively). However, the analysis of LED-based skin wound healing and atopic dermatitis treatments exhibited heterogeneity (I2  = 85% and 90%) due to the lack of unpublished articles. In conclusion, it is suggested that LEDs are useful for dermatology and could be potential candidates for future cosmetic applications.

A first-principles study on atomic-scale pore design of microporous carbon electrodes for lithium-ion batteries.

Porous carbon materials are considered attractive lithium storage media because their large specific surface areas and pore volumes provide high adsorption capacity. This first-principles study elucidates the atomic-scale mechanisms of lithium storage and diffusion in microporous carbon. Microporous carbon structures with initial densities of 1.5, 2.0, and 2.5 g cm-3 store up to 7.5-8.2 Li ions per C6 corresponding to the capacities of 2783-3032 mA h g-1, which are 7-8 times higher than that for graphite. Fully lithiated microporous carbon has about 62% of Li ions inside the pore cavity and on the pore surface, responsible for reversible capacity, and about 38% of Li ions inside the pore wall, responsible for irreversible capacity. As lithiation proceeds, microporous carbon structures with different total pore volumes evolve to have similar total pore volumes but different average pore volumes. The average pore volume has a great influence on Li ion conductivity, as evidenced by the highest conductivity of 103.5 mS cm-1 for the largest average pore diameter of 9.3 Å. Inside large pore cavities, Li ions diffuse rapidly without encountering carbon atoms that impede Li diffusion, suggesting that a high Li-to-C ratio around Li causes fast Li ion motion. This study offers not only a comprehensive understanding of the lithiation of microporous carbon but also design directions for developing efficient microporous carbon electrodes for lithium-ion batteries.

Efficacy and Safety of COVID-19 Treatment Using Convalescent Plasma Transfusion: Updated Systematic Review and Meta-Analysis of Randomized Controlled Trials.

This study investigated the efficacy and safety of convalescent plasma (CP) transfusion against the coronavirus disease 2019 (COVID-19) via a systematic review and meta-analysis of randomized controlled trials (RCTs). A total of 5467 articles obtained from electronic databases were assessed; however, only 34 RCTs were eligible after manually screening and eliminating unnecessary studies. The beneficial effect was addressed by assessing the risk ratio (RR) and standardized mean differences (SMDs) of the meta-analysis. It was demonstrated that CP therapy is not effective in improving clinical outcomes, including reducing mortality with an RR of 0.88 [0.76; 1.03] (I2 = 68% and p = 0.10) and length of hospitalization with SMD of -0.47 [-0.95; 0.00] (I2 = 99% and p = 0.05). Subgroup analysis provided strong evidence that CP transfusion does not significantly reduce all-cause mortality compared to standard of care (SOC) with an RR of 1.01 [0.99; 1.03] (I2 = 70% and p = 0.33). In addition, CP was found to be safe for and well-tolerated by COVID-19 patients as was the SOC in healthcare settings. Overall, the results suggest that CP should not be applied outside of randomized trials because of less benefit in improving clinical outcomes for COVID-19 treatment.

Recent Insights into Particulate Matter (PM2.5)-Mediated Toxicity in Humans: An Overview.

Several epidemiologic and toxicological studies have commonly viewed ambient fine particulate matter (PM2.5), defined as particles having an aerodynamic diameter of less than 2.5 µm, as a significant potential danger to human health. PM2.5 is mostly absorbed through the respiratory system, where it can infiltrate the lung alveoli and reach the bloodstream. In the respiratory system, reactive oxygen or nitrogen species (ROS, RNS) and oxidative stress stimulate the generation of mediators of pulmonary inflammation and begin or promote numerous illnesses. According to the most recent data, fine particulate matter, or PM2.5, is responsible for nearly 4 million deaths globally from cardiopulmonary illnesses such as heart disease, respiratory infections, chronic lung disease, cancers, preterm births, and other illnesses. There has been increased worry in recent years about the negative impacts of this worldwide danger. The causal associations between PM2.5 and human health, the toxic effects and potential mechanisms of PM2.5, and molecular pathways have been described in this review.

Microwave-Assisted Dendropanax morbifera Extract for Cosmetic Applications.

Recently, utilizing natural bioactive compounds for active ingredients in cosmetics has become a growing worldwide trend. More and more studies aim to identify the sources of herbal ingredients for applications in the pharmaceutical and cosmetic fields. Additionally, in order to optimize the safety of natural ingredients, choosing an environmentally friendly extraction method also plays an important role. In this work, an eco-friendly extraction technique for Dendropanax morbifera using microwave treatment and microwave-assisted Dendropanax morbifera extract (MA-DME) was investigated. The results indicate that higher yields of MA-DME were obtained than with conventional methods and that D. morbifera's antioxidant properties were enhanced. Moreover, we found that MA-DME exhibited extraordinary antioxidant, anti-aging, and skin-whitening activities. We suggest MA-DME as a potential cosmeceutical ingredient than could be utilized for comprehensive protection of human skin.

Plant-Derived Nanoscale-Encapsulated Antioxidants for Oral and Topical Uses: A Brief Review.

Several plant-based nanoscale-encapsulated antioxidant compounds (rutin, myricetin, ß-carotene, fisetin, lycopene, quercetin, genkwanin, lutein, resveratrol, eucalyptol, kaempferol, glabridin, pinene, and whole-plant bio-active compounds) are briefly introduced in this paper, along with their characteristics. Antioxidants' bioavailability has become one of the main research topics in bio-nanomedicine. Two low patient compliance drug delivery pathways (namely, the oral and topical delivery routes), are described in detail in this paper, for nanoscale colloidal systems and gel formulations. Both routes and/or formulations seek to improve bioavailability and maximize the drug agents' efficiency. Some well-known compounds have been robustly studied, but many remain elusive. The objective of this review is to discuss recent studies and advantages of nanoscale formulations of plant-derived antioxidant compounds.

Human Health Impacts of Residential Radon Exposure: Updated Systematic Review and Meta-Analysis of Case-Control Studies.

This study investigated the impact of residential radon exposure on human cancers (i.e., lung cancer and childhood leukemia) through a systematic review and meta-analysis of case−control studies. A total of 9724 articles obtained from electronic databases were assessed; however, only 55 case−control studies were eligible after manually screening and eliminating unnecessary studies. The causal associations were addressed by determining the meta-analysis's estimated size effects (i.e., ORs/RRs) of the meta-analysis. Residential radon was revealed to significantly increase the incidence of lung cancer and childhood leukemia with pooled ORs of 1.38 [1.19; 1.60] (I2 = 90%; p < 0.00001) and 1.43 [1.19; 1.72] (I2 = 0% and p = 0.51), respectively. In addition, subgroup analyses were performed to reduce the heterogeneity of the initial meta-analyses. The results provided strong evidence that inhaling radon in the indoor environments is closely associated with the development of lung cancer and childhood leukemia in patients living in Europe and areas with high radon levels (≥100 Bq/m3).

Novel moisturized and antimicrobial hand gel based on zinc-aminoclay and Opuntia humifusa extract.

The high antimicrobial ability and low toxicity of zinc-aminoclay (ZnAC) are claimed in our previous reports. In this study, we formulate a novel hand gel based on ZnAC and Opuntia humifusa (O. humifusa) extract, which is a high moisturizing agent. The antimicrobial activity, cytotoxicity, moisturizing effect, and clinical skin irritation of the hand gel are evaluated. The hand gel with 0.5 wt.% ZnAC and 1.0 v/v% O. humifusa extract can kill more than 99% Escherichia coli (gram-negative bacteria) and Staphylococcus aureus (gram-positive bacteria) after 24 h. Toxicity evaluation shows that, the hand gel does not affect the viability of mammalian HaCaT cells. Additionally, skin moisture is increased by applying the hand gel while its viscosity is at the standard level of commercial products. The hand gel has a skin irritation index of 0.0 and is classified as a non-irritating product. We successfully formulated hand gel from ZnAC, glucomannan, glycerol, and O. humifusa extract. Owing to the high antimicrobial activity and skin protection of hand gels, they are suitable to be used as hand sanitizers in restaurants, hospitals, and homes effectively.

Review of ZnO Binary and Ternary Composite Anodes for Lithium-Ion Batteries.

To enhance the performance of lithium-ion batteries, zinc oxide (ZnO) has generated interest as an anode candidate owing to its high theoretical capacity. However, because of its limitations such as its slow chemical reaction kinetics, intense capacity fading on potential cycling, and low rate capability, composite anodes of ZnO and other materials are manufactured. In this study, we introduce binary and ternary composites of ZnO with other metal oxides (MOs) and carbon-based materials. Most ZnO-based composite anodes exhibit a higher specific capacity, rate performance, and cycling stability than a single ZnO anode. The synergistic effects between ZnO and the other MOs or carbon-based materials can explain the superior electrochemical characteristics of these ZnO-based composites. This review also discusses some of their current limitations.

Development of Antimicrobial CuO/(3-aminopropyl)Triethoxysilane Activated Carbon Fiber.

CuO nanoparticles (NPs) have been used for the antimicrobial agent against different pathogenic microorganisms. In this study, CuO NPs are immobilized on the surface of activated carbon fiber (ACF) with the enhancement of (3-aminopropyl)triethoxysilane (APTES) as an organic binder. The obtained fibers are evaluated by coating efficiency, structural deformation, and antimicrobial activities. In the results, APTES can improve the immobilization of CuO on the surface of ACF. Also, the curing of silane layers at high temperature leads to the high coating efficiencies as well as structural reinforcement. The samples with drying step after APTES coating step (denoted as DA-CuO) have the highest antimicrobial activity against both Escherichia coli and Staphylococcus aureus after 24 hours treatment, respectively.