RESUMO
BACKGROUND: The aim is to establish and verify reference intervals (RIs) for serum tumor markers for an apparently healthy elderly population in Southwestern China using an indirect method. METHODS: Data from 35,635 apparently healthy elderly individuals aged 60 years and above were obtained in West China Hospital from April 2020 to December 2021. We utilized the Box-Cox conversion combined with the Tukey method to normalize the data and eliminate outliers. Subgroups are divided according to gender and age to examine the division of RIs. The Z-test was used to compare differences between groups, and 95% distribution RIs were calculated using a nonparametric method. RESULTS: In the study, we observed that the RIs for serum ferritin and Des-γ-carboxy prothrombin (DCP) were wider for men, ranging from 64.18 to 865.80 ng/ml and 14.00 to 33.00 mAU/ml, respectively, compared to women, whose ranges were 52.58 to 585.88 ng/ml and 13.00 to 29.00 mAU/ml. For other biomarkers, the overall RIs were established as follows: alpha-fetoprotein (AFP) 0-6.75 ng/ml, carcinoembryonic antigen (CEA) 0-4.85 ng/ml, carbohydrate antigen15-3 (CA15-3) for females 0-22.00 U/ml, carbohydrate antigen19-9 (CA19-9) 0-28.10 U/ml, carbohydrate antigen125 (CA125) 0-20.96 U/ml, cytokeratin 19 fragment (CYFRA21-1) 0-4.66 U/ml, neuron-specific enolase (NSE) 0-19.41 ng/ml, total and free prostate-specific antigens (tPSA and fPSA) for males 0-5.26 ng/ml and 0-1.09 ng/ml. The RIs for all these biomarkers have been validated through our rigorous processes. CONCLUSION: This study preliminarily established 95% RIs for an apparently healthy elderly population in Southwestern China. Using real-world data and an indirect method, simple and reliable RIs for an elderly population can be both established and verified, which are suitable for application in various clinical laboratories.
Assuntos
Biomarcadores Tumorais , Protrombina , Humanos , Masculino , Feminino , Idoso , Biomarcadores Tumorais/sangue , China/epidemiologia , Valores de Referência , Pessoa de Meia-Idade , Idoso de 80 Anos ou mais , Neoplasias/sangue , Neoplasias/epidemiologia , alfa-Fetoproteínas/análise , Ferritinas/sangue , Antígeno CA-19-9/sangue , Antígeno Carcinoembrionário/sangue , Antígeno Ca-125/sangue , Fosfopiruvato Hidratase/sangue , Queratina-19/sangue , Precursores de Proteínas , BiomarcadoresRESUMO
BACKGROUND: Emerging evidence suggests that aberrant alternative splicing (AS) may play an important role in tuberculosis (TB). However, current knowledge regarding the value of AS in TB progression and prognosis remains unclear. METHOD: Public RNA-seq datasets related to TB progression and prognosis were searched and AS analyses were conducted based on SUPPA2. Percent spliced in (PSI) was used for quantifying AS events and multiple machine learning (ML) methods were employed to construct predictive models. Area under curve (AUC), sensitivity and specificity were calculated to evaluate the model performance. RESULTS: A total of 1587 samples from 7 datasets were included. Among 923 TB-progression related differential AS events (DASEs), 3 events (GET1-skipping exon (SE), TPD52-alternative first exons (AF) and TIMM10-alternative 5' splice site (A5)) were selected as candidate biomarkers; however, their predictive performance was limited. For TB prognosis, 5 events (PHF23-AF, KIF1B-SE, MACROD2-alternative 3' splice site (A3), CD55-retained intron (RI) and GALNT11-AF) were selected as candidates from the 1282 DASEs. Six ML methods were used to integrate these 5 events and XGBoost outperformed than others. AUC, sensitivity and specificity of XGBoost model were 0.875, 81.1% and 83.5% in training set, while they were 0.805, 68.4% and 73.2% in test set. CONCLUSION: GET1-SE, TPD52-AF and TIMM10-A5 showed limited role in predicting TB progression, while PHF23-AF, KIF1B-SE, MACROD2-A3, CD55-RI and GALNT11-AF could well predict TB prognosis and work as candidate biomarkers. This work preliminarily explored the value of AS in predicting TB progression and prognosis and offered potential targets for further research.
Assuntos
Processamento Alternativo , Tuberculose , Humanos , Processamento Alternativo/genética , Sítios de Splice de RNA , Tuberculose/diagnóstico , Tuberculose/genética , RNA-Seq , Biomarcadores , Proteínas de Neoplasias , Proteínas de HomeodomínioRESUMO
This article presents a novel approach for evaluating laser scribing quality through cross-section profiles generated from a three-dimensional optical profiler. Existing methods for assessing scribing quality only consider the width and depth of a scribe profile. The proposed method uses a cubic spline model for cross-section profiles. Two quality characteristics are proposed to assess scribing accuracy and consistency. Accuracy is measured by the ratio of the actual laser-scribed area to the target area (RA), which reflects the deviation from the desired profile. The mean square error (MSE) is a measure of how close each scribed cross-section under the same scribing conditions is to the fitted cubic spline model. Over 1370 cross-section profiles were generated under 171 scribing conditions. Two response surface polynomial models for RA and MSE were built with 18 scribing conditions with acceptable scribing depth and RA values. Both RA and MSE were considered simultaneously via contour plots. A scatter plot of RA and MSE was then used for Pareto optimization. It was found that the cross-sectional profile of a laser scribe could be accurately represented by a cubic spline model. A multivariate nonlinear regression model for RA and MSE identified pulse energy and repetition rate as the two dominant laser parameters. A Pareto optimization analysis further established a Pareto front, where the best compromised solution could be found.
RESUMO
Objective: To review the research progress of the feasibility of a new treatment method for atrophic rhinitis (ATR) based on tissue engineering technology (seed cells, scaffold materials, and growth factors), and provide new ideas for the treatment of ATR. Methods: The literature related to ATR was extensively reviewed. Focusing on the three aspects of seed cells, scaffold materials, and growth factors, the recent research progress of ATR treatment was reviewed, and the future directions of tissue engineering technology to treat ATR were proposed. Results: The pathogenesis and etiology of ATR are still unclear, and the effectiveness of the current treatments are still unsatisfactory. The construction of a cell-scaffold complex with sustained and controlled release of exogenous cytokines is expected to reverse the pathological changes of ATR, promoting the regeneration of normal nasal mucosa and reconstructing the atrophic turbinate. In recent years, the research progress of exosomes, three-dimensional printing, and organoids will promote the development of tissue engineering technology for ATR. Conclusion: Tissue engineering technology can provide a new treatment method for ATR.
Assuntos
Rinite Atrófica , Engenharia Tecidual , Humanos , Engenharia Tecidual/métodos , Alicerces Teciduais , Impressão Tridimensional , CitocinasRESUMO
Three dimensional freeze printing (3DFP) combines the advantages of freeze casting and additive manufacturing to fabricate multifunctional aerogels. Freeze casting is a cost-effective, efficient, and versatile method capable of fabricating micro-scale porous structures inside the aerogels for many different applications. The 3DFP provided the capability of fabricating highly customized geometries with controlled microporous structures as well. However, there are still many unexplained phenomena and features because of the complexity of post-processes and indirect observation methods. This study demonstrates the design and construction of the in situ imaging systems, which use the x-ray synchrotron radiography to observe freeze casting and 3DFP processes. With the advantages provided by the in situ x-ray imaging techniques, the ice crystal growth with its unique lamellar structures can be observed during the freeze casting process. The movement of freeze front, material deposition, and growth of ice crystals can also be visualized during the inkjet-based 3DFP process.
RESUMO
We demonstrate, for the first time, the direct writing of curved optical waveguides in monocrystalline silicon with curve radii from 2 mm to 6 cm. The bending loss of the curved waveguides is measured and a good agreement with theoretical values is found. Raman spectroscopy measurements suggest the formation of inhomogeneous amorphous and polycrystalline phases in the laser-modified region. This direct laser-writing method may advance fabrication capabilities for integrated 3D silicon photonic devices.
RESUMO
Graphyne was recently facilely synthesized with superior mechanical and electrical performance. We investigate the ballistic protection properties of α-, ß-, δ-, and γ-graphyne sheets using molecular dynamics simulations in conjunction with elastic theory. The velocities of the in-plane elastic wave and out-of-plane cone wave are obtained by both membrane theory and molecular dynamics simulations. The specific penetration energies are approximately 83% that of graphene, indicating high impact resistance. γ-Graphyne has high sound wave speeds comparable to those of graphene, and its Young's modulus is approximately 60% that of graphene. δ-Graphyne has the highest cone wave speed among the four structures, while α-graphyne possesses the highest penetration energy and impact resistance at most tested projectile speeds. Our results indicate that graphyne is a good protective structural material.
RESUMO
@#[Abstract] Objective: : To explore the impact of γ-chain (γc) family cytokines (IL-2, IL-7, IL-15, IL-21) on T cell phenotypes in ex vivo culture to provide experimental evidence for ex vivo cell preparation in adoptive immunotherapy. Methods: Peripheral blood mononuclear cells (PBMCs) were isolated from peripheral blood of healthy volunteers; nylon column sorting, CD3+ magnetic beads sorting, CD3- magnetic beads sorting and natural sedimentation were used to sort T cells from PBMCs. The purity, recovery rate and viability of T cells sorted by the above methods were compared. The CD3/CD28 magnetic beads-activated CD3+T cells were cultured inAIMV medium with IL-2 or mixed cytokines (IL-7, IL-15, IL-21). The expansion fold and phenotypes of T cells in ex vivo culture were detected by flow cytometry. Results: : The purity of T cells sorted by CD3- magnetic beads sorting was significantly higher than that sorted by nylon column, CD3+ magnetic beads sorting and natural sedimentation ([94.06±1.07]% vs [86.74±1.06]%, [89.61±1.40]%, [88.48 ± 1.86]%, P<0.05); The recovery rate of T cells sorted by natural sedimentation was significantly higher than that by other three methods ([60.29±1.53]% vs [45.03±2.79]%, [20.15±3.41]%, [42.98±2.82]%, P<0.05). Comprehensively, the natural sedimentation method is the best option. The ex vivo expansion fold of T cells in IL-2 group was significantly higher than that in mixed group ([262.6±143.2] times vs [73.0±25.8] times, P<0.05). The proportions of early memory T cells, Tscm+Tscm-like and Tcmin the mixed group were significantly higher than those in the IL-2 group ([55.6±1.82]% vs [39.6±1.52]%, [16.6±1.82]% vs [9.8±1.30]%, [39.0±1.58]% vs [29.2±1.79]%; all P < 0.05). Conclusion: : Natural sedimentation sorting has advantages of low cost, high recovery and purity. Mixed cytokines of IL-7, IL-15 and IL-21 are beneficial for production of early memory T cells. This study provides an experimental data of ex vivo T cell preparation for cancer adoptive immunotherapy.
RESUMO
We present a compact, simple design for the generation and tuning of both the spot size and effective focal length of Bessel-like beams. In particular, this setup provides an important tool for the use of Bessel-like beams with high-power, femtosecond laser systems. Using a shallow angle axicon in conjunction with a spherical lens, we show that it is possible to focus Bessel-like modes to comparable focal spot sizes to sharp axicons while maintaining a long effective focal length. The resulting focal profiles are characterized in detail using an accurate high dynamic range imaging technique. Quantitatively, we introduce a metric (R0.8) which defines the spot-size containing 80% of the total energy. Our setup overcomes the typical compromise between long working distances and small spot sizes. This is particularly relevant for strong-field physics where most experiments must operate in vacuum.
RESUMO
We demonstrate a chirped-pulse-amplified Ti:Sapphire laser system operating at 1 kHz, with 20 mJ pulse energy, 26 femtosecond pulse duration (0.77 terawatt), and excellent long term carrier-envelope-phase (CEP) stability. A new vibrational damping technique is implemented to significantly reduce vibrational noise on both the laser stretcher and compressor, thus enabling a single-shot CEP noise value of 250 mrad RMS over 1 hour and 300 mrad RMS over 9 hours. This is, to the best of our knowledge, the best long term CEP noise ever reported for any terawatt class laser. This laser is also used to pump a white-light-seeded optical parametric amplifier, producing 6 mJ of total energy in the signal and idler with 18 mJ of pumping energy. Due to preservation of the CEP in the white-light generated signal and passive CEP stability in the idler, this laser system promises synthesized laser pulses spanning multi-octaves of bandwidth at an unprecedented energy scale.
RESUMO
Circular craters with diameters of 500 nm are fabricated on the surface of fused silica by femtosecond ultraviolet-infrared (UV-IR) pulse trains with 0.8 nJ UV pulse energy. UV damage thresholds at different IR energies and UV-IR delays are measured. Diameters and depths of the ablated craters can be modified by adding the IR pulse and varying the UV-IR delays. These results demonstrate the feasibility of nanomachining using short wavelength lasers with pulse energy far below normal damage thresholds.
RESUMO
We report on the experimental results of 300 nm features generated on fused silica using a near-infrared (IR) femtosecond laser pulse initiated by an ultraviolet (UV) pulse. With both pulses at a short (~60 fs) delay, the damage threshold of the UV pulse is only 10% of its normal value. Considerable reduction of UV damage threshold is observed when two pulses are at ± 1.3 ps delay. The damage feature size of the combined pulses is similar to that of a single UV pulse. A modified rate equation model with the consideration of defect states is used to help explain these results. This concept can be applied to shorter wavelengths, e.g. XUV and X-ray, with the required fluence below their normal threshold.