Nanoscale tip positioning with a multi-tip scanning tunneling microscope using topography images.

Multi-tip scanning tunneling microscopy (STM) is a powerful method to perform charge transport measurements at the nanoscale. With four STM tips positioned on the surface of a sample, four-point resistance measurements can be performed in dedicated geometric configurations. Here, we present an alternative to the most often used scanning electron microscope imaging to infer the corresponding tip positions. After the initial coarse positioning is monitored by an optical microscope, STM scanning itself is used to determine the inter-tip distances. A large STM overview scan serves as a reference map. Recognition of the same topographic features in the reference map and in small scale images with the individual tips allows us to identify the tip positions with an accuracy of about 20 nm for a typical tip spacing of ∼1µm. In order to correct for effects such as the non-linearity of the deflection, creep, and hysteresis of the piezoelectric elements of the STM, a careful calibration has to be performed.

Room temperature in-situ measurement of the spin voltage of a BiSbTe3 thin film.

One of the hallmarks of topological insulators (TIs), the intrinsic spin polarisation in the topologically protected surface states, is investigated at room temperature in-situ by means of four-probe scanning tunnelling microscopy (STM) for a BiSbTe3 thin film. To achieve the required precision of tip positions for measuring a spin signal, a precise positioning method employing STM scans of the local topography with each individual tip is demonstrated. From the transport measurements, the spin polarisation in the topological surface states (TSS) is estimated as p ~ 0.3 - 0.6, which is close to the theoretical limit.

In-situ four-tip STM investigation of the transition from 2D to 3D charge transport in SrTiO3.

The electrical properties of SrTiO3(100) single crystals were investigated in-situ at different stages of thermal reduction by means of a 4-tip STM. Using the tips of the STM as electrical probes, distance-dependent four-point measurements were performed at the surface of the crystal at room temperature after reduction by thermal treatment. For annealing temperatures T ≤ 700 °C, charge transport is confined to a surface region <3 µm below the surface. For reduction at T ≥ 900 °C a transition from a conducting 2D sheet with insulating bulk to a system with dominant 3D bulk conductivity is found. At an intermediate reduction temperature of T = 800 °C, a regime with mixed 2D/3D contributions is observed in the distance-dependent resistance measurements. Describing the depth-dependent conductivity with an analytical N-layer model, this regime of mixed 2D/3D conductivity is evaluated quantitatively under the assumption of an exponentially decaying conductivity profile, correlated with the previously observed depth-dependent dislocation density in the sample. A non-monotonous temperature dependence of the 3D conductivity in the respective conducting layer is found and possible underlying mechanisms are discussed, particularly with regard to non-intrinsic material properties depending on details of the sample preparation.

Invited Review Article: Multi-tip scanning tunneling microscopy: Experimental techniques and data analysis.

In scanning tunneling microscopy, we witness in recent years a paradigm shift from "just imaging" to detailed spectroscopic measurements at the nanoscale and multi-tip scanning tunneling microscope (STM) is a technique following this trend. It is capable of performing nanoscale charge transport measurements like a "multimeter at the nanoscale." Distance-dependent four-point measurements, the acquisition of nanoscale potential maps at current carrying nanostructures and surfaces, as well as the acquisition of I - V curves of nanoelectronic devices are examples of the capabilities of the multi-tip STM technique. In this review, we focus on two aspects: How to perform the multi-tip STM measurements and how to analyze the acquired data in order to gain insight into nanoscale charge transport processes for a variety of samples. We further discuss specifics of the electronics for multi-tip STM and the properties of tips for multi-tip STM, and present methods for a tip approach to nanostructures on insulating substrates. We introduce methods on how to extract the conductivity/resistivity for mixed 2D/3D systems from four-point measurements, how to measure the conductivity of 2D sheets, and how to introduce scanning tunneling potentiometry measurements with a multi-tip setup. For the example of multi-tip measurements at freestanding vapor liquid solid grown nanowires, we discuss contact resistances as well as the influence of the presence of the probing tips on the four point measurements.