Molecular Junctions for Terahertz Switches and Detectors.

Molecular electronics targets tiny devices exploiting the electronic properties of the molecular orbitals, which can be tailored and controlled by the chemical structure and configuration of the molecules. Many functional devices have been experimentally demonstrated; however, these devices were operated in the low-frequency domain (mainly dc to MHz). This represents a serious limitation for electronic applications, although molecular devices working in the THz regime have been theoretically predicted. Here, we experimentally demonstrate molecular THz switches at room temperature. The devices consist of self-assembled monolayers of molecules bearing two conjugated moieties coupled through a nonconjugated linker. These devices exhibit clear negative differential conductance behaviors (peaks in the current-voltage curves), as confirmed by ab initio simulations, which were reversibly suppressed under illumination with a 30 THz wave. We analyze how the THz switching behavior depends on the THz wave properties (power and frequency), and we benchmark that these molecular devices would outperform actual THz detectors.

Electronic properties of single Prussian Blue Analog nanocrystals determined by conductive-AFM.

We report a study of the electron transport (ET) properties at the nanoscale (conductive-AFM denoted as C-AFM hereafter) of individual Prussian Blue Analog (PBA) cubic nanocrystals (NCs) of CsCoIIIFeII, with a size between 15 and 50 nm deposited on HOPG. We demonstrate that these PBA NCs feature an almost size-independent electron injection barrier of 0.41 ± 0.02 eV and 0.27 ± 0.03 eV at the CsCoIIIFeII/HOPG and CsCoIIIFeII/C-AFM tip, respectively, and an intrinsic electron conductivity evolving from a large dispersion between ∼5 × 10-4 and 2 × 10-2 S cm-1 without a clear correlation with the nanocrystal size. The conductivity values measured on individual nanocrystals are up to fifty times higher than those reported on PBA films.

Correction: Redox-controlled conductance of polyoxometalate molecular junctions.

Correction for 'Redox-controlled conductance of polyoxometalate molecular junctions' by Cécile Huez et al., Nanoscale, 2022, 14, 13790-13800, https://doi.org/10.1039/D2NR03457C.

Redox-controlled conductance of polyoxometalate molecular junctions.

We demonstrate the reversible in situ photoreduction of molecular junctions of a phosphomolybdate [PMo12O40]3- monolayer self-assembled on flat gold electrodes, connected by the tip of a conductive atomic force microscope. The conductance of the one electron reduced [PMo12O40]4- molecular junction is increased by ∼10, and this open-shell state is stable in the junction in air at room temperature. The analysis of a large current-voltage dataset by unsupervised machine learning and clustering algorithms reveals that the electron transport in the pristine phosphomolybdate junctions leads to symmetric current-voltage curves, controlled by the lowest unoccupied molecular orbital (LUMO) at 0.6-0.7 eV above the Fermi energy with ∼25% of the junctions having a better electronic coupling to the electrodes than the main part of the dataset. This analysis also shows that a small fraction (∼18% of the dataset) of the molecules is already reduced. The UV light in situ photoreduced phosphomolybdate junctions systematically feature slightly asymmetric current-voltage behaviors, which is ascribed to the electron transport mediated by the single occupied molecular orbital (SOMO) nearly at resonance with the Fermi energy of the electrodes and by a closely located single unoccupied molecular orbital (SUMO) at ∼0.3 eV above the SOMO with a weak electronic coupling to the electrodes (∼50% of the dataset) or at ∼0.4 eV but with a better electrode coupling (∼50% of the dataset). These results shed light on the electronic properties of reversible switchable redox polyoxometalates, a key point for potential applications in nanoelectronic devices.

Thermal and electrical cross-plane conductivity at the nanoscale in poly(3,4-ethylenedioxythiophene):trifluoromethanesulfonate thin films.

Cross-plane electrical and thermal transport in thin films of a conducting polymer (poly(3,4-ethylenedioxythiophene), PEDOT) stabilized with trifluoromethanesulfonate (OTf) is investigated in this study. We explore their electrical properties by conductive atomic force microscopy (C-AFM), which reveals the presence of highly conductive nano-domains. Thermal conductivity in the cross-plane direction is measured by null-point scanning thermal microscopy (NP-SThM). PEDOT:OTf indeed demonstrates a non-negligible electronic contribution to the thermal transport. We further investigate the correlation between electrical and thermal conductivity by applying post-treatment: chemical reduction (de-doping) to lower charge carrier concentration and hence, electrical conductivity and acid treatment (over-doping) to increase the latter. From our measurements, we find a vibrational thermal conductivity of 0.34 ± 0.04 W m-1 K-1. From the linear dependence or the electronic contribution of thermal conductivity vs. the electronic conductivity (Wiedemann-Franz law), we infer a Lorenz number 6 times larger than the classical Sommerfeld value as also observed in many organic materials for in-plane thermal transport. By applying the recently proposed molecular Wiedemann-Franz law, we deduced a reorganization energy of 0.53 ± 0.06 eV.

Terphenylthiazole-based self-assembled monolayers on cobalt with high conductance photo-switching ratio for spintronics.

Two new photo-switchable terphenylthiazole molecules are synthesized and self-assembled as monolayers on Au and on ferromagnetic Co electrodes. The electron transport properties probed by conductive atomic force microscopy in ultra-high vacuum reveal a larger conductance of the light-induced closed (c) form than for the open (o) form. We report an unprecedented conductance ratio of up to 380 between the closed and open forms on Co for the molecule with the anchoring group (thiol) on the side of the two N atoms of the thiazole unit. This result is rationalized by Density Functional Theory (DFT) calculations coupled to the Non-Equilibrium Green's function (NEGF) formalism. These calculations show that the high conductance in the closed form is due to a strong electronic coupling between the terphenylthiazole molecules and the Co electrode that manifests by a resonant transmission peak at the Fermi energy of the Co electrode with a large broadening. This behavior is not observed for the same molecules self-assembled on gold electrodes. These high conductance ratios make these Co-based molecular junctions attractive candidates to develop and study switchable molecular spintronic devices.

Conductance switching of azobenzene-based self-assembled monolayers on cobalt probed by UHV conductive-AFM.

We report the formation of self-assembled monolayers of a molecular photoswitch (azobenzene-bithiophene derivative, AzBT) on cobalt via a thiol covalent bond. We study the electrical properties of the molecular junctions formed with the tip of a conductive atomic force microscope under ultra-high vacuum. The statistical analysis of the current-voltage curves shows two distinct states of the molecule conductance, suggesting the coexistence of both the trans and cis azobenzene isomers on the surface. The cis isomer population (trans isomer) increases (decreases) upon UV light irradiation. The situation is reversed under blue light irradiation. The experiments are confronted to first-principle calculations performed on the molecular junctions with the Non-Equilibrium Green's Function formalism combined with Density Functional Theory (NEGF/DFT). The theoretical results consider two different molecular orientations for each isomer. Whereas the orientation does not affect the conductance of the trans isomer, it significantly modulates the conductance of the cis isomer and the resulting conductance ON/OFF ratio of the molecular junction. This helps identifying the molecular orientation at the origin of the observed current differences between the trans and cis forms. The ON state is associated to the trans isomer irrespective of its orientation in the junction, while the OFF state is identified as a cis isomer with its azobenzene moiety folded upward with respect to the bithiophene core. The experimental and calculated ON/OFF conductance ratios have a similar order of magnitude. This conductance ratio seems reasonable to make these Co-AzBT molecular junctions a good test-bed to further explore the relationship between the spin-polarized charge transport, the molecule conformation and the molecule-Co spinterface.

Thermal conductivity of benzothieno-benzothiophene derivatives at the nanoscale.

We study by scanning thermal microscopy the nanoscale thermal conductance of films (40-400 nm thick) of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8). We demonstrate that the out-of-plane thermal conductivity is significant along the interlayer direction, larger for BTBT (0.63 ± 0.12 W m-1 K-1) compared to C8-BTBT-C8 (0.25 ± 0.13 W m-1 K-1). These results are supported by molecular dynamics calculations (approach to equilibrium molecular dynamics method) performed on the corresponding molecular crystals. The calculations point to significant thermal conductivity (3D-like) values along the 3 crystalline directions, with anisotropy factors between the crystalline directions below 1.8 for BTBT and below 2.8 for C8-BTBT-C8, in deep contrast with the charge transport properties featuring a two-dimensional character for these materials. In agreement with the experiments, the calculations yield larger values in BTBT compared to C8-BTBT-C8 (0.6-1.3 W m-1 K-1versus 0.3-0.7 W m-1 K-1, respectively). The weak thickness dependence of the nanoscale thermal resistance is in agreement with a simple analytical model.

Long-range electron transport in Prussian blue analog nanocrystals.

We report electron transport measurements through nano-scale devices consisting of 1 to 3 Prussian blue analog (PBA) nanocrystals connected between two electrodes. We compare two types of cubic nanocrystals, CsCoIIIFeII (15 nm) and CsNiIICrIII (6 nm), deposited on highly oriented pyrolytic graphite and contacted by conducting-AFM. The measured currents show an exponential dependence with the length of the PBA nano-device (up to 45 nm), with low decay factors ß, in the range 0.11-0.18 nm-1 and 0.25-0.34 nm-1 for the CsCoFe and the CsNiCr nanocrystals, respectively. From the theoretical analysis of the current-voltage curve for the nano-scale device made of a single nanoparticle, we deduce that the electron transport is mediated by the localized d bands at around 0.5 eV from the electrode Fermi energy in the two cases. By comparison with previously reported ab initio calculations, we tentatively identify the involved orbitals as the filled Fe(ii)-t2g d band (HOMO) for CsCoFe and the half-filled Ni(ii)-eg d band (SOMO) for CsNiCr. Conductance values measured for multi-nanoparticle nano-scale devices (2 and 3 nanocrystals between the electrodes) are consistent with a multi-step coherent tunneling in the off-resonance regime between adjacent PBAs, a simple model gives a strong coupling (around 0.1-0.25 eV) between the adjacent PBA nanocrystals, mediated by electrostatic interactions.

Covalent Grafting of Polyoxometalate Hybrids onto Flat Silicon/Silicon Oxide: Insights from POMs Layers on Oxides.

Immobilization of polyoxometalates (POMs) onto oxides is relevant to many applications in the fields of catalysis, energy conversion/storage, or molecular electronics. Optimization and understanding the molecule/oxide interface is crucial to rationally improve the performance of the final molecular materials. We herein describe the synthesis and covalent grafting of POM hybrids with remote carboxylic acid functions onto flat Si/SiO2 substrates. Special attention has been paid to the characterization of the molecular layer and to the description of the POM anchoring mode at the oxide interface through the use of various characterization techniques, including ellipsometry, AFM, XPS, and FTIR. Finally, electron transport properties were probed in a vertical junction configuration and energy level diagrams have been drawn and discussed in relation with the POM molecular electronic features inferred from cyclic-voltammetry, UV-visible absorption spectra, and theoretical calculations. The electronic properties of these POM-based molecular junctions are driven by the POM LUMO (d-orbitals) whatever the nature of the tether or the anchoring group.

Electrical detection of plasmon-induced isomerization in molecule-nanoparticle network devices.

We use a network of molecularly linked gold nanoparticles (NPSAN: nanoparticle self-assembled network) to demonstrate the electrical detection (conductance variation) of plasmon-induced isomerization (PII) of azobenzene derivatives (azobenzene bithiophene: AzBT). We show that PII is more efficient in a 3D-like NPSAN (cluster-NPSAN) than in a purely two-dimensional NPSAN (i.e., a monolayer of AzBT functionalized Au NPs). By comparison with the usual optical (UV-visible light) isomerization of AzBT, PII shows faster (a factor > ∼10) isomerization kinetics. Possible PII mechanisms are discussed: electric field-induced isomerization, two-phonon process, and plasmon-induced resonance energy transfer (PIRET), the latter being the most likely.

Molecular signature of polyoxometalates in electron transport of silicon-based molecular junctions.

Polyoxometalates (POMs) are unconventional electro-active molecules with a great potential for applications in molecular memories, providing efficient processing steps onto electrodes are available. The synthesis of the organic-inorganic polyoxometalate hybrids [PM11O39{Sn(C6H4)C[triple bond, length as m-dash]C(C6H4)N2}]3- (M = Mo, W) endowed with a remote diazonium function is reported together with their covalent immobilization onto hydrogenated n-Si(100) substrates. Electron transport measurements through the resulting densely-packed monolayers contacted with a mercury drop as a top electrode confirms their homogeneity. Adjustment of the current-voltage curves with the Simmon's equation gives a mean tunnel energy barrier ΦPOM of 1.8 eV and 1.6 eV, for the Silicon-Molecules-Metal (SMM) junctions based on the polyoxotungstates (M = W) and polyoxomolybdates (M = Mo), respectively. This follows the trend observed in the electrochemical properties of POMs in solution, the polyoxomolybdates being easier to reduce than the polyoxotungstates, in agreement with lowest unoccupied molecular orbitals (LUMOs) of lower energy. The molecular signature of the POMs is thus clearly identifiable in the solid-state electrical properties and the unmatched diversity of POM molecular and electronic structures should offer a great modularity.

Probing Frontier Orbital Energies of {Co9(P2W15)3} Polyoxometalate Clusters at Molecule-Metal and Molecule-Water Interfaces.

Functionalization of polyoxotungstates with organoarsonate coligands enabling surface decoration was explored for the triangular cluster architectures of the composition [CoII9(H2O)6(OH)3(p-RC6H4AsVO3)2(α-PV2WVI15O56)3]25- ({Co9(P2W15)3}, R = H or NH2), isolated as Na25[Co9(OH)3(H2O)6(C6H5AsO3)2(P2W15O56)3]·86H2O (Na-1; triclinic, P1̅, a = 25.8088(3) Å, b = 25.8336(3) Å, c = 27.1598(3) Å, α = 78.1282(11)°, ß = 61.7276(14)°, γ = 60.6220(14)°, V = 13888.9(3) Å3, Z = 2) and Na25[Co9(OH)3(H2O)6(H2NC6H4AsO3)2(P2W15O56)3]·86H2O (Na-2; triclinic, P1̅, a = 14.2262(2) Å, b = 24.8597(4) Å, c = 37.9388(4) Å, α = 81.9672(10)°, ß = 87.8161(10)°, γ = 76.5409(12)°, V = 12920.6(3) Å3, Z = 2). The axially oriented para-aminophenyl groups in 2 facilitate the formation of self-assembled monolayers on gold surfaces and thus provide a viable molecular platform for charge transport studies of magnetically functionalized polyoxometalates. The title systems were isolated and characterized in the solid state, in aqueous solutions, and on metal surfaces. Using conducting tip atomic force microscopy, the energies of {Co9(P2W15)3} frontier molecular orbitals in the surface-bound state were found to directly correlate with cyclic voltammetry data in aqueous solution.

Concentric-Electrode Organic Electrochemical Transistors: Case Study for Selective Hydrazine Sensing.

We report on hydrazine-sensing organic electrochemical transistors (OECTs) with a design consisting of concentric annular electrodes. The design engineering of these OECTs was motivated by the great potential of using OECT sensing arrays in fields such as bioelectronics. In this work, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based OECTs have been studied as aqueous sensors that are specifically sensitive to the lethal hydrazine molecule. These amperometric sensors have many relevant features for the development of hydrazine sensors, such as a sensitivity down to 10-5 M of hydrazine in water, an order of magnitude higher selectivity for hydrazine than for nine other water-soluble common analytes, the capability to entirely recover its base signal after water flushing, and a very low operation voltage. The specificity for hydrazine to be sensed by our OECTs is caused by its catalytic oxidation at the gate electrode, and enables an increase in the output current modulation of the devices. This has permitted the device-geometry study of the whole series of 80 micrometric OECT devices with sub-20-nm PEDOT:PSS layers, channel lengths down to 1 µm, and a specific device geometry of coplanar and concentric electrodes. The numerous geometries unravel new aspects of the OECT mechanisms governing the electrochemical sensing behaviours of the device-more particularly the effect of the contacts which are inherent at the micro-scale. By lowering the device cross-talk, micrometric gate-integrated radial OECTs shall contribute to the diminishing of the readout invasiveness and therefore further promote the development of OECT biosensors.

Charge Blinking Statistics of Semiconductor Nanocrystals Revealed by Carbon Nanotube Single Charge Sensors.

We demonstrate the relation between the optical blinking of colloidal semiconductor nanocrystals (NCs) and their electrical charge blinking for which we provide the first experimental observation of power-law statistics. To show this, we harness the performance of CdSe/ZnS NCs coupled with carbon nanotube field-effect transistors (CNTFETs), which act as single charge-sensitive electrometers with submillisecond time resolution, at room temperature. A random telegraph signal (RTS) associated with the NC single-trap charging is observed and exhibits power-law temporal statistics (τ(-α), with α in the range of ∼1-3), and a Lorentzian current noise power spectrum with a well-defined 1/f(2) corner. The spectroscopic analysis of the NC-CNTFET devices is consistent with the charging of NC defect states with a charging energy of Ec ≥ 200 meV. These results pave the way for a deeper understanding of the physics and technology of nanocrystal-based optoelectronic devices.

A crown-ether loop-derivatized oligothiophene doubly attached on gold surface as cation-binding switchable molecular junction.

A crown-ether dithiol quaterthiophene is synthesized and immobilized on gold surface by double covalent fixation. UV-vis spectroscopy and cyclic voltammetry show that the corresponding dithioester precursor can complex Pb(2+) in solution and that this property is maintained for monolayers of the dithiol on gold. Current-voltage measurements by eutectic GaIn drop contact on the monolayer show a significant increase (up to 1.6 × 10(3) times) of the current at low bias after Pb(2+) complexation.

Chemical functionalization of electrodes for detection of gaseous nerve agents with carbon nanotube field-effect transistors.

An innovative sensor for the detection of nerve agents in the gas phase based on a carbon nanotube field-effect transistor was developed. A high sensitivity to organophosphorus gases was obtained by modifying gold electrodes with specific tailor-made self-assembled monolayers.

Thiolate chemistry: a powerful and versatile synthetic tool for immobilization/functionalization of oligothiophenes on a gold surface.

The synthesis and characterization of a series of quaterthiophenes (4Ts) with thiolate groups protected with 2-cyanoethyl (CNE), 2-trimethylsilylethyl (TMSE), and acetyl (Ac) groups are described. Sequential cleavage of these different protecting groups allows for the preparation of 4Ts derivatized with ferrocene and/or alkanethiol chains. The electrochemical behavior of these compounds has been analyzed in solution by cyclic voltammetry (CV). A ferrocene-derivatized dithiol 4T 14 and a dithiol 4T 15 with two TMSE-protected thiolate groups have been immobilized on a gold surface as monolayers that have been characterized by CV, ellipsometry, contact-angle measurement, and X-ray photoelectron spectroscopy (XPS). The results show that molecules 14 and 15 are doubly grafted with a horizontal orientation of the conjugated system relative to the surface. Furthermore, application of the deprotection/alkylation sequence of the remaining protected thiolate groups on a monolayer of 15 allows for efficient post-functionalization.

Oligothiophene-derivatized azobenzene as immobilized photoswitchable conjugated systems.

Immobilization of an azobenzene-bithiophene compound on a gold surface leads to self-assembled monolayers with photoswitchable electrical properties.