Optimized Chitosan-Based Nanoemulsion Improves Luteolin Release.

Luteolin (LUT) is a flavonoid found in several edible and medicinal plants. It is recognized for its biological activities such as antioxidant, anti-inflammatory, neuroprotective, and antitumor effects. However, the limited water solubility of LUT leads to poor absorption after oral administration. Nanoencapsulation may improve the solubility of LUT. Nanoemulsions (NE) were selected for the encapsulation of LUT due to their biodegradability, stability, and ability to control drug release. In this work, chitosan (Ch)-based NE was developed to encapsulate luteolin (NECh-LUT). A 23 factorial design was built to obtain a formulation with optimized amounts of oil, water, and surfactants. NECh-LUT showed a mean diameter of 67.5 nm, polydispersity index 0.174, zeta potential of +12.8 mV, and encapsulation efficiency of 85.49%. Transmission electron microscopy revealed spherical shape and rheological analysis verified the Newtonian behavior of NECh-LUT. SAXS technique confirmed the bimodal characteristic of NECh-LUT, while stability analysis confirmed NECh-LUT stability when stored at room temperature for up to 30 days. Finally, in vitro release studies showed LUT controlled release up to 72 h, indicating the promising potential of NECh-LUT to be used as novel therapeutic option to treat several disorders.

Fragmentation of hunting bullets observed with synchrotron radiation: Lighting up the source of a lesser-known lead exposure pathway.

Bullet fragments have been previously observed in the remains and edible portions of big game animals that were harvested using rifles. The fragmentation issue has attracted attention because traditional hunting bullets are more than 70% lead, which is toxic to humans and scavengers in the ecosystem. We prepared gunshot wounds in ballistic gelatin blocks, and then applied synchrotron X-ray imaging technology to the bullet fragmentation process for the first time. The K edge subtraction (KES) imaging method allowed a clear separation of lead in an image from false positives, including the other major bullet component, copper, and non-lead objects such as bone fragments. The superior brightness of synchrotron radiation was also harnessed to resolve thousands of embedded sub-10 µm fragments, a size range not previously observed using commonly applied X-ray imaging modalities. The results challenge the current understanding of the maximum extent that fragments may be distributed, and the effectiveness of imaging methods used to screen wild game donations at food banks for lead bullet fragments.

The lower energy diffraction and scattering side-bounce beamline for materials science at the Canadian Light Source.

A new diffraction beamline for materials science has been built at the Canadian Light Source synchrotron. The X-ray source is an in-vacuum wiggler with a 2.5 T peak magnetic field at 5.2 mm gap. The optical configuration includes a toroidal mirror, a single side-bounce Bragg monochromator, and a cylindrical mirror, producing a sub-150 µm vertical × 500 µm horizontal focused beam with a photon energy range of 7-22 keV and a flux of 1012 photons per second at the sample position. Three endstations are currently open to general users, and the techniques available include high-resolution powder diffraction, small molecule crystallography, X-ray reflectivity, in situ rapid thermal annealing, and SAXS/WAXS. The beamline design parameters, calculated and measured performance, and initial experimental results are presented to demonstrate the capabilities for materials science.

Thermal stability studies of short period Sc/Cr and Sc/B4C/Cr multilayers.

The stability of short period Sc/Cr and Sc/B4C/Cr multilayers was investigated over a large temperature range. The aim was to find a stable reflective coating for an off-axis parabola for focusing x rays from a soft x-ray free-electron laser. Normal incidence reflectivity, surface roughness, and intrinsic stress were investigated as a function of annealing temperature and two samples were also studied with a high-resolution transmission electron microscope (TEM), a scanning TEM, and through electron energy loss spectroscopy (EELS). Interface-engineered Sc/B4C/Cr multilayers showed increased thermal stability and higher reflectivity as compared to pure Sc/Cr multilayers.

Accurate dosimetry in scanning transmission X-ray microscopes via the cross-linking threshold dose of poly(methyl methacrylate).

The sensitivity of various polymers to radiation damage by soft X-rays has been measured previously with scanning transmission X-ray microscopes. However, the critical dose values reported by different groups for the same material differ by more than 100%. Possible sources of this variability are investigated here for poly(methyl methacrylate) (PMMA) using controlled exposure to monochromatic soft X-rays at 300 eV. Radiation sensitivity, judged by several different criteria, was evaluated as a function of dose rate, pre-exposure thermal treatments and X-ray polarization. Both the measured critical dose and the dose required to initiate negative mode (cross-linking) were observed to depend only on dose, not the other factors explored. A method of determining detector efficiency from the dose required to initiate negative mode in PMMA is outlined. This method was applied to many of the soft X-ray STXMs presently operating to derive the efficiencies of their transmitted X-ray detectors in the C 1s absorption-edge region.

Experimental investigation of beam heating in a soft X-ray scanning transmission X-ray microscope.

A variable temperature sample holder with an operational range of 15 to 200 °C and an accuracy of ±1 °C has been fabricated for scanning transmission X-ray microscopes (STXM). Here we describe the device, and use it to image the polycrystalline morphology of solid stearic acid and palmitic acid at temperatures near their respective melting points as a means of checking for possible sample heating caused by the focused X-ray beam. The melting points observed in STXM were identical to those observed by conventional methods within measurement uncertainty, even under the most extreme, high dose rate imaging conditions investigated. The beam-induced temperature rise in the sample is inferred to be below 1 °C for dose rates of up to 2.7 GGy/s.

Surface properties of water-soluble glycine-cysteamine-protected gold clusters.

We report the synthesis of water-soluble, nearly monodisperse glycine-cysteamine (Gly-CSA) gold monolayer protected clusters (MPCs) via base deprotection of Fmoc-Gly-CSA MPCs. The resulting Gly-CSA MPCs, which have terminal primary amine groups, are fully characterized by (1)H and (13)C NMR, UV-vis spectroscopy, and TEM, and their surface properties were probed by dynamic light scattering and acid-base titrations. The characterization methods indicate that the as-synthesized particles are nearly monodisperse with an average particle size of 1.8 +/- 0.3 nm, but are only stable to aggregation in water at pHs of 4 and below. Acid-base titrations of the Gly-CSA MPCs show that the primary ammonium groups have a pK(a) of approximately 5.5, which is several orders of magnitude lower than the pK(a2) for the ammonium group of glycine (9.6). Thus, the particles are only partially protonated at intermediate pH's, which then drives the aggregation of the nanoparticles via hydrogen-bond formation. Dynamic light scattering results confirm the pH-driven aggregation of the nanoparticles, and studies with ninhydrin confirm that the primary amine groups are reactive and have potential for further functionalization. These results show that amine-terminated MPCs can be synthesized; however, their aggregation at intermediate pH's can limit their utility as building blocks for multifunctional nanoparticle syntheses.