Synthesis and Study of Organic Nanostructures Fabricated by Inclusion of 2-Methylbenzimidazole Molecules in Nanotubes of Chrysotile Asbestos, Mesoporous Silica, and Nanopores of Borate Glasses.

New organic nanostructures were synthesized by introducing 2-methylbenzimidazole (MBI) molecules from a melt, gas phase, or alcoholic solution into nanosized voids of borate porous glasses (PG), nanotubes of chrysotile asbestos (ChA), and mesoporous silica (MS). The incorporation of MBI into borate glasses with different pore sizes is accompanied by the appearance of several phases formed by nanocrystallites which have a MBI crystal structure, but somewhat differ in lattice parameters. The size of some crystallites significantly exceeds the size of nanopores, which indicates the presence of long-scale correlations of the crystal structure. The size of MBI nanocrystallites in ChA was close to the diameter of nanotubes (D ~10 nm), which shows the absence of crystal structure correlations. The XRD pattern of mesoporous silica filled by MBI does not exhibit reflections caused by MBI and a presence of MBI was confirmed only by the analysis of correlation function. The incorporation of MBI molecules into matrices is observed through optical IR absorption spectroscopy (FTIR) and photoluminescence. Introducing MBI in ChA and MS is followed by the appearance of bright green photoluminescence, the spectral structure of which is analogous to MBI crystals but slightly shifted in the blue region, probably due to a quantum-size effect. The influence of MBI inclusion in PG and ChA on the permittivity, dielectric losses, conductivity, and parameters of their hopping conductivity is analyzed.

Structural, Magnetic, and Magneto-Optical Properties of Thin Films of BaM Hexaferrite Grown by Laser Molecular Beam Epitaxy.

Thin films of BaM hexaferrite (BaFe12O19) were grown on α-Al2O3(0001) substrates by laser molecular beam epitaxy. Structural, magnetic, and magneto-optical properties were studied using medium-energy ion scattering, energy dispersive X-ray spectroscopy, atomic force microscopy, X-ray diffraction, magneto-optical spectroscopy, and magnetometric techniques, and the dynamics of magnetization by ferromagnetic resonance method. It was shown that even a short time annealing drastically changes the structural and magnetic properties of films. Only annealed films demonstrate magnetic hysteresis loops in PMOKE and VSM experiments. The shape of hysteresis loops depends on thickness of films showing practically rectangular loops and high value of remnant magnetization (Mr/Ms~99%) for thin films (50 nm) and much broader and sloped loops in thick (350-500 nm) films. The magnitude of magnetization 4πMs ≈ 4.3 kG in thin films corresponds to that in bulk BaM hexaferrite. Photon energy and sign of bands in magneto-optical spectra of thin films correspond to ones observed earlier in bulk samples and films of BaM hexaferrite. FMR spectra of 50 nm films at 50 GHz consist of a number of narrow lines. The width of main line ΔH~20 Oe is lower than has been reported up to now.

Commercial articulated collaborative in situ 3D bioprinter for skin wound healing.

In situ bioprinting is one of the most clinically relevant techniques in the emerging bioprinting technology because it could be performed directly on the human body in the operating room and it does not require bioreactors for post-printing tissue maturation. However, commercial in situ bioprinters are still not available on the market. In this study, we demonstrated the benefit of the originally developed first commercial articulated collaborative in situ bioprinter for the treatment of full-thickness wounds in rat and porcine models. We used an articulated and collaborative robotic arm from company KUKA and developed original printhead and correspondence software enabling in situ bioprinting on curve and moving surfaces. The results of in vitro and in vivo experiments show that in situ bioprinting of bioink induces a strong hydrogel adhesion and enables printing on curved surfaces of wet tissues with a high level of fidelity. The in situ bioprinter was convenient to use in the operating room. Additional in vitro experiments (in vitro collagen contraction assay and in vitro 3D angiogenesis assay) and histological analyses demonstrated that in situ bioprinting improves the quality of wound healing in rat and porcine skin wounds. The absence of interference with the normal process of wound healing and even certain improvement in the dynamics of this process strongly suggests that in situ bioprinting could be used as a novel therapeutic modality in wound healing.

Crystal Structure, Raman, FTIR, UV-Vis Absorption, Photoluminescence Spectroscopy, TG-DSC and Dielectric Properties of New Semiorganic Crystals of 2-Methylbenzimidazolium Perchlorate.

Single crystals of 2-methylbenzimidazolium perchlorate were prepared for the first time with a slow evaporation method from an aqueous solution of a mixture of 2-methylbenzimidazole (MBI) crystals and perchloric acid HClO4. The crystal structure was determined by single crystal X-ray diffraction (XRD) and confirmed by XRD of powder. Angle-resolved polarized Raman and Fourier-transform infrared (FTIR) absorption spectra of crystals consist of lines caused by molecular vibrations in MBI molecule and ClO4- tetrahedron in the region ν = 200-3500 cm-1 and lattice vibrations in the region of 0-200 cm-1. Both XRD and Raman spectroscopy show a protonation of MBI molecule in the crystal. An analysis of ultraviolet-visible (UV-Vis) absorption spectra gives an estimation of an optical gap Eg~3.9 eV in the crystals studied. Photoluminescence spectra of MBI-perchlorate crystals consist of a number of overlapping bands with the main maximum at Ephoton ≅ 2.0 eV. Thermogravimetry-differential scanning calorimetry (TG-DSC) revealed the presence of two first-order phase transitions with different temperature hysteresis at temperatures above room temperature. The higher temperature transition corresponds to the melting temperature. Both phase transitions are accompanied by a strong increase in the permittivity and conductivity, especially during melting, which is similar to the effect of an ionic liquid.

Correlation of the regenerative potential of dermal fibroblasts in 2D culture with the biological properties of fibroblast-derived tissue spheroids.

In situ 3D bioprinting is a new emerging therapeutic modality for treating human skin diseases. The tissue spheroids have been previously suggested as a powerful tool in rapidly expanding bioprinting technology. It has been demonstrated that the regenerative potential of human dermal fibroblasts could be quantitatively evaluated in 2D cell culture and confirmed after implantation in vivo. However, the development of unbiassed quantitative criteria of the regenerative potential of 3D tissue spheroids in vitro before their in situ bioprinting remains to be investigated. Here it has been demonstrated for the first time that specific correlations exist between the regenerative potential of human dermal fibroblasts cultured in vitro as 2D cell monolayer with biological properties of 3D tissue spheroids fabricated from these fibroblasts. In vitro assessment of biological properties included diameter, spreading and fusion kinetics, and biomechanical properties of 3D tissue spheroids. This comprehensive characterization could be used to predict tissue spheroids' regenerative potential in vivo.

Magnetic Patterning of Tissue Spheroids Using Polymer Microcapsules Containing Iron Oxide Nanoparticles.

Magnetic tissue engineering is one of the rapidly emerging and promising directions of tissue engineering and biofabrication where the magnetic field is employed as temporal removal support or scaffold. Iron oxide nanoparticles are used to label living cells and provide the desired magnetic properties. Recently, polymer microcapsules loaded with iron oxide nanoparticles have been proposed as a novel approach to designing magnetic materials with high local concentrations. These microcapsules can be readily internalized and retained intracellularly for a long time in various types of cells. The low cytotoxicity of these microcapsules was previously shown in 2D cell culture. This paper has demonstrated that cells containing these nontoxic nanomaterials can form viable 3D tissue spheroids for the first time. The spheroids retained labeled fluorescent microcapsules with magnetic nanoparticles without a detectable cytotoxic effect. The high concentration of packed nanoparticles inside the microcapsules enables the evident magnetic properties of the labeled spheroids to be maintained. Finally, magnetic spheroids can be effectively used for magnetic patterning and biofabrication of tissue-engineering constructs.

Scaffold-free, Label-free, and Nozzle-free Magnetic Levitational Bioassembler for Rapid Formative Biofabrication of 3D Tissues and Organs.

Scaffolding is the conceptual framework of conventional tissue engineering. Over the past decade, scaffold-free approaches as a potential alternative to classic scaffold-based methods have emerged, and scaffold-free magnetic levitational tissue engineering (magnetic force-based tissue engineering [Mag-TE]) is a type of this novel tissue engineering strategy. However, Mag-TE is often based on the use of potentially toxic magnetic nanoparticles. Scaffold-free and label-free magnetic levitational bioassembly do not employ magnetic nanoparticles and thus, the potential toxicity of magnetic nanoparticles can be avoided. In this short review, we describe the conceptual foundation of scaffold-free, label-free, and nozzle-free formative biofabrication using magnetic fields as "scaffields." The design and implementation of "Organ.Aut," the first commercial magnetic levitational bioassembler, and the potential applications of magnetic bioassembler are discussed as well.

Synthesis and Three-Dimensional Magnetic Field Mapping of Co2FeGa Heusler Nanowires at 5 nm Resolution.

We present the synthesis of Co2FeGa Heusler nanowires and the results of our investigations on their three-dimensional (3D) electric and magnetic internal and external fields mapped by electron holographic tomography (EHT). These fields will be of great importance in next-generation nanomagnets integrated in spintronics and memory devices. The Co2FeGa nanowires with a L21 ordered structure are prepared by a SBA-15 silica-assisted method. The magnetic dipole-like stray fields of several Co2FeGa nanowires are revealed by holographically reconstructed phase images. Based on the measured magnetic phase shifts of an individual nanowire and its 3D reconstruction using EHT, we obtain an internal magnetic induction with a magnitude of 1.15 T and a nonmagnetic surface layer of 10 nm thickness. Furthermore, we also reconstruct the 3D distribution of the electrostatic potential of the same nanowire.