RESUMO
A photoinduced reversible addition-fragmentation chain-transfer (photo-RAFT) polymerization technique in the presence of sodium pyruvate (SP) and pyruvic acid derivatives was developed. Depending on the wavelength of light used, SP acted as a biocompatible photoinitiator or promoter for polymerization, allowing rapid open-to-air polymerization in aqueous media. Under UV irradiation (370 nm), SP decomposes to generate CO2 and radicals, initiating polymerization. Under blue (450 nm) or green (525 nm) irradiation, SP enhances the polymerization rate via interaction with the excited state RAFT agent. This method enabled the polymerization of a range of hydrophilic monomers in reaction volumes up to 250 mL, eliminating the need to remove radical inhibitors from the monomers. In addition, photo-RAFT polymerization using SP allowed for the facile synthesis of protein-polymer hybrids in short reaction times (<1 h), low organic content (≤16%), and without rigorous deoxygenation and the use of transition metal photocatalysts. Enzymatic studies of a model protein (chymotrypsin) showed that despite a significant loss of protein activity after conjugation with RAFT chain transfer agents, the grafting polymers from proteins resulted in a 3-4-fold recovery of protein activity.
RESUMO
Photoinduced reversible-deactivation radical polymerization (photo-RDRP) techniques offer exceptional control over polymerization, providing access to well-defined polymers and hybrid materials with complex architectures. However, most photo-RDRP methods rely on UV/visible light or photoredox catalysts (PCs), which require complex multistep synthesis. Herein, we present the first example of fully oxygen-tolerant red/NIR-light-mediated photoinduced atom transfer radical polymerization (photo-ATRP) in a high-throughput manner under biologically relevant conditions. The method uses commercially available methylene blue (MB+) as the PC and [X-CuII/TPMA]+ (TPMA = tris(2-pyridylmethyl)amine) complex as the deactivator. The mechanistic study revealed that MB+ undergoes a reductive quenching cycle in the presence of the TPMA ligand used in excess. The formed semireduced MB (MBâ¢) sustains polymerization by regenerating the [CuI/TPMA]+ activator and together with [X-CuII/TPMA]+ provides control over the polymerization. This dual catalytic system exhibited excellent oxygen tolerance, enabling polymerizations with high monomer conversions (>90%) in less than 60 min at low volumes (50-250 µL) and high-throughput synthesis of a library of well-defined polymers and DNA-polymer bioconjugates with narrow molecular weight distributions (D < 1.30) in an open-air 96-well plate. In addition, the broad absorption spectrum of MB+ allowed ATRP to be triggered under UV to NIR irradiation (395-730 nm). This opens avenues for the integration of orthogonal photoinduced reactions. Finally, the MB+/Cu catalysis showed good biocompatibility during polymerization in the presence of cells, which expands the potential applications of this method.
RESUMO
Two graphene oxide nanoassemblies using 5-(4-(aminophenyl)-10,15,20-triphenylporphyrin (TPPNH2) were fabricated by two synthetic methods: covalent (GO-CONHTPP) and noncovalent bonding. GO-CONHTPP was achieved through amide formation at the periphery of GO sheets and the hybrid material was fully characterized by FTIR, XPS, Raman spectroscopy, and SEM. Spectroscopic measurements together with theoretical calculations demonstrated that assembling TPPNH2 on the GO surface in DMF-H2O (1:2, v/v) via non-covalent interactions causes changes in the absorption spectra of porphyrin, as well as efficient quenching of its emission. Interestingly, covalent binding to GO does not affect notably neither the porphyrin absorption nor its fluorescence. Theoretical calculations indicates that close proximity and π-π-stacking of the porphyrin molecule with the GO sheet is possible only for the non-covalent functionalization. Femtosecond pump-probe experiments revealed that only the non-covalent assembly of TPPNH2 and GO enhances the efficiency of the photoinduced electron transfer from porphyrin to GO. In contrast to the non-covalent hybrid, the covalent GO-CONHTPP material can generate singlet oxygen with quantum yields efficiency (ΦΔ = 0.20) comparable to that of free TPPNH2 (ΦΔ = 0.26), indicating the possible use of covalent hybrid materials in photodynamic/photothermal therapy. The spectroscopic studies combined with detailed quantum-chemical analysis provide invaluable information that can guide the fabrication of hybrid materials with desired properties for specific applications.
RESUMO
The present study explored the correlation between the photocatalytic activity toward hydrogen production of the graphene-based materials and graphene oxide (GO) morphology. In this work we applied the technique based on the combination of time-dependent sonication and iterative centrifugation cascades, which were designed to achieve nanosheets size and the number of layers selection. First such obtained GO dispersions were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical spectroscopy. Those combined measurements showed that the intensity of the π-π peak at 230 nm seems to be very sensitive to the number of layers of nanosheets. Next, GO dispersions were used to establish influence of the size and the number of layers of GO flakes on the photocatalytic hydrogen production in the photocatalytic system, containing eosin Y as a sensitizer, triethanolamine as a sacrificial electron donor, and CoSO4 as precatalyst. The H2 production efficiency varied by a factor of 3.7 for GO dispersions sonicated for various amount of time. Interestingly it was found that too long ultrasound treatment had negative impact on the GO enhancement of hydrogen production which was related to the fragmentation of GO flakes. The photocatalytic system produced the highest amount of H2 when graphene oxide occurs as monolayers and efficiency becomes lower with the decrease of GO sheets size. Our results demonstrate the importance of optimizing the size and the number of layers of the GO flakes prior to preparation of GO-based materials.
RESUMO
Graphene-based nanohybrids are good candidates for various applications. However, graphene exhibits some unwanted features such as low solubility in an aqueous solution or tendency to aggregate, limiting its potential applications. On the contrary, its derivatives, such as graphene oxide (GO) and reduced graphene oxide (RGO), have excellent properties and can be easily produced in large quantities. GO/RGO nanohybrids with porphyrins were shown to possess great potential in the field of photocatalytic hydrogen production, pollutant photodegradation, optical sensing, or drug delivery. Despite the rapid progress in experimental research on the porphyrin-graphene hybrids some fundamental questions about the structures and the interaction between components in these systems still remain open. In this work, we combine detailed experimental and theoretical studies to investigate the nature of the interaction between the GO/RGO and two metal-free porphyrins 5,10,15,20-tetrakis(4-aminophenyl) porphyrin (TAPP) and 5,10,15,20-tetrakis(4-hydroxyphenyl) porphyrin (TPPH)]. The two porphyrins form stable nanohybrids with GO/RGO support, although both porphyrins exhibited a slightly higher affinity to RGO. We validated finite, Lerf-Klinowski-type (Lerf et al. in J Phys Chem B 102:4477, 1998) structural models of GO ([Formula: see text]) and RGO ([Formula: see text]) and successfully used them in ab initio absorption spectra simulations to track back the origin of experimentally observed spectral features. We also investigated the nature of low-lying excited states with high-level wavefunction-based methods and shown that states' density becomes denser upon nanohybrid formation. The studied nanohybrids are non-emissive, and our study suggests that this is due to excited states that gain significant charge-transfer character. The presented efficient simulation protocol may ease the properties screening of new GO/RGO-nanohybrids.
RESUMO
Two noncovalent nanohybrids between cationic porphyrin (free-base TMPyP and zinc(II) ZnTMPyP) bearing cationic (N-methylpyridyl) groups and graphene oxide (GO) were constructed with the aim of generating a photocatalyst active for rhodamine B (RhB) degradation. The obtained materials were thoroughly characterized by steady-state and time-resolved absorption and emission methods, which indicated that metalation of the porphyrin with Zn(II) increases the affinity of the porphyrin toward the GO surface. Photocurrent experiment together with femtosecond transient absorption spectroscopy clearly showed the existence of electron transfer from the photoexcited porphyrin to GO. Both hybrid materials demonstrated higher photocatalytic activity toward RhB degradation as compared to GO; however, ZnTMPyP-GO exhibited more efficient performance (19% of RhB decomposition after 2 h of irradiation). Our data indicate that the presence of Zn(II) in the core of the porphyrin can promote charge separation in the ZnTMPyP-GO composites. The higher degradation rate seen with ZnTMPyP-GO as compared to the TMPyP-GO assemblies highlights the beneficial role of Zn(II)-metalation of the porphyrin ring.
RESUMO
The present study explores the influence of graphene oxide (GO) on deactivation pathways of the excited states of zinc 5,10,15,20-tetrakis(4-(hydroxyphenyl))porphyrin (ZnTPPH). The interaction of light with free ZnTPPH molecules and with ZnTPPH molecules adsorbed on graphene oxide sheets was probed via UV-vis spectroscopy, fluorescence spectroscopy, femtosecond pump-probe technique and nanosecond flash photolysis. Formation of the ground-state ZnTPPH-GO complex in solution was monitored by the red-shift of the porphyrin Soret absorption band. It was found that Stern-Volmer fluorescence quenching can be described in terms of two different quenching regimes depending on the GO concentration. In addition, our comprehensive analysis of the steady-state and time-resolved emission experiments led to the conclusion that the observed quenching was entirely attributable to a static mechanism. Laser flash photolysis showed that the triplet lifetime of the ZnTPPH increased in the presence of GO from 174 µs to 292 µs, which is related to the decrease in the rate constant of a radiationless decay mechanism involving rotation of the peripheral hydroxyphenyl rings of the porphyrin. Femtosecond transient absorption spectroscopy demonstrated the presence of a fast photoinduced electron transfer from the singlet excited state of ZnTPPH to the GO sheets, as indicated by the formation of a porphyrin radical cation. Quantum chemical calculations were used to gain deeper insights into the nature of the electronically excited states in the free ZnTPPH as well as in the ZnTPPH-GO complex.
RESUMO
The solvent-composition dependence of quenching triplet states of benzophenone (3BP) by anisole in acetonitrile-water (ACN-H2O) mixtures was investigated by laser flash photolysis over the water mole fraction (xw) increasing from 0 to 0.92. Single exponential decay of 3BP was observed over the whole composition range. The quenching rate constant consistently increased with the water content but increased far more rapidly with xw > 0.7. The water-triggered electron-transfer (ET) mechanism was confirmed by a steeply growing quantum yield of the benzophenone ketyl radical anion, escaping back-ET when the partial water volume exceeded the acetonitrile one. The water-content influence on the 3BP quenching rate was described by a kinetic model accounting for the microheterogeneous structure of the ACN-H2O mixtures and the very different solubility of the reactants in the solvent components. According to the model, the ET mechanism occurs at a rate constant of 1.46 × 109 M-1 s-1 and is presumably assisted by the ACN-H2O hydrogen-bonding interaction.
RESUMO
Non-covalent nanohybrids composed of cationic 5,10,15,20-tetra(4-trimethylammoniophenyl)porphyrin tetra(p-toluenesulfonate) (TMAP) and the graphene oxide sheets were prepared under two pH values (6.2 vs. 1.8). The TMAP molecule was positively charged, regardless of the pH value during preparation. However, protonation of the imino nitrogens increased the overall charge of the porphyrin molecule from +4 to +6 (TMAP4+ and TMAP6+ ). It was found that at acidic pH, interaction of TMAP6+ with GO was largely suppressed. On the other hand, results of FTIR, Raman spectroscopy, thermogravimetric analysis, atomic force microscopy (AFM) and elemental analysis confirmed effective non-covalent functionalization of graphene oxide with cationic porphyrin at pHâ 6.2. The TMAP4+ -GO hybrids exhibited well defined structure with a monolayer of TMAP4+ on the GO sheets as confirmed by AFM. Formation of the ground-state TMAP4+ -GO complex in solution was monitored by the red-shift of the porphyrin Soret absorption band. This ground-state interaction between TMAP4+ and GO is responsible for the static quenching of the porphyrin emission. Fluorescence was not detected for the nanohybrid which indicated that a very fast deactivation process had to take place. Ultrafast time-resolved transient absorption spectroscopy clearly demonstrated the occurrence of electron transfer from the photoexcited TMAP4+ singlet state to GO sheets, as proven by the formation of a porphyrin radical cation.
RESUMO
Electron-proton transfer (EPT) from phenols to a triplet metal-to-ligand charge transfer (MLCT)-excited Ru polypyridine complex containing an uncoordinated nitrogen site, 1(T), can be described by a kinetic model that accounts for the H-bonding of 1(T) to phenol, 1(T) to solvent, and phenol to solvent. The latter plays a major role in the kinetic solvent effect and commonly precludes simultaneous determination of the EPT rate constant and 1(T)-phenol H-bonding constant. A number of these quantities previously reported for similar systems are shown to be in error due to inconsistent data analysis. Control experiments replacing either 1(T) by its structural isomer with a sterically screened nitrogen site or phenol by its H-bonding surrogate, trifluoroethanol, and the observation of negative activation enthalpies for the overall reactions between 1(T) and phenols lend support to the proposed model and provide evidence for the formation of a precursor H-bonded complex between the reactants, which is a prerequisite for EPT.
RESUMO
We describe herein the synthesis and characterization of ruthenium complexes with multifunctional bipyridyl diphosphonate ligands as well as initial water oxidation studies. In these complexes, the phosphonate groups provide redox-potential leveling through charge compensation and σâ donation to allow facile access to high oxidation states. These complexes display unique pH-dependent electrochemistry associated with deprotonation of the phosphonic acid groups. The position of these groups allows them to shuttle protons in and out of the catalytic site and reduce activation barriers. A mechanism for water oxidation by these catalysts is proposed on the basis of experimental results and DFT calculations. The unprecedented attack of water at a neutral six-coordinate [Ru(IV) ] center to yield an anionic seven-coordinate [Ru(IV) -OH](-) intermediate is one of the key steps of a single-site mechanism in which all species are anionic or neutral. These complexes are among the fastest single-site catalysts reported to date.
RESUMO
We prepared two geometric isomers of [Ir(tpy)(ppy)H](+), previously proposed as a key intermediate in the photochemical reduction of CO2 to CO, and characterized their notably different ground- and excited-state interactions with CO2 and their hydricities using experimental and computational methods. Only one isomer, C-trans-[Ir(tpy)(ppy)H](+), reacts with CO2 to generate the formato complex in the ground state, consistent with its calculated hydricity. Under photocatalytic conditions in CH3CN/TEOA, a common reactive C-trans-[Ir(tpy)(ppy)](0) species, irrespective of the starting isomer or monodentate ligand (such as hydride or Cl), reacts with CO2 and produces CO with the same catalytic efficiency.
RESUMO
The ability of cobalt-based transition metal complexes to catalyze electrochemical proton reduction to produce molecular hydrogen has resulted in a large number of mechanistic studies involving various cobalt complexes. While the basic mechanism of proton reduction promoted by cobalt species is well-understood, the reactivity of certain reaction intermediates, such as Co(I) and Co(III)-H, is still relatively unknown owing to their transient nature, especially in aqueous media. In this work we investigate the properties of intermediates produced during catalytic proton reduction in aqueous solutions promoted by the [(DPA-Bpy)Co(OH2)](n+) (DPA-Bpy = N,N-bis(2-pyridinylmethyl)-2,20-bipyridine-6-methanamine) complex ([Co(L)(OH2)](n+) where L is the pentadentate DPA-Bpy ligand or [Co(OH2)](n+) as a shorthand). Experimental results based on transient pulse radiolysis and laser flash photolysis methods, together with electrochemical studies and supported by density functional theory (DFT) calculations indicate that, while the water ligand is strongly coordinated to the metal center in the oxidation state 3+, one-electron reduction of the complex to form a Co(II) species results in weakening the Co-O bond. The further reduction to a Co(I) species leads to the loss of the aqua ligand and the formation of [Co(I)-VS)](+) (VS = vacant site). Interestingly, DFT calculations also predict the existence of a [Co(I)(κ(4)-L)(OH2)](+) species at least transiently, and its formation is consistent with the experimental Pourbaix diagram. Both electrochemical and kinetics results indicate that the Co(I) species must undergo some structural change prior to accepting the proton, and this transformation represents the rate-determining step (RDS) in the overall formation of [Co(III)-H](2+). We propose that this RDS may originate from the slow removal of a solvent ligand in the intermediate [Co(I)(κ(4)-L)(OH2)](+) in addition to the significant structural reorganization of the metal complex and surrounding solvent resulting in a high free energy of activation.
RESUMO
Catalytic water oxidation has been investigated using five iridium complexes as precatalysts and NaIO4 as an oxidant at various pH conditions. An increase in the activity of all complexes was observed with increasing pH. A detailed analysis of spectroscopic data together with O2-evolution experiments using Cp*Ir(6,6'-dihydroxy-2,2'-bipyridine)(OH2)(2+) as a precatalyst indicate that the high catalytic activity is closely connected with transient species (A) that exhibits an absorption band at λmax 590 nm. The formation of this active form is strongly dependent on reaction conditions, and the species was distinctly observed using a small excess of periodate. However, another species absorbing at 600 nm (B), which seems to be a less active catalyst, was also observed and was more prominent at high oxidant concentration. Dynamic light scattering analysis and transmission electron microscopy have identified species B as 120 nm nanoparticles. The ultrafiltration method has revealed that species A can be attributed to particles with size in the range of 0.52 nm, possibly small IrOx clusters similar to those described previously by Harriman and co-workers (J. Phys. Chem., 1991, 95, 616621).
Assuntos
Irídio/química , Compostos Organometálicos/química , Água/química , Catálise , Cinética , Oxirredução , Espectroscopia de Prótons por Ressonância Magnética , Espectrofotometria UltravioletaRESUMO
We have investigated the kinetics of novel carbon-to-metal hydrogen atom transfer reactions, in which homolytic cleavage of a C-H bond is accomplished by a single metal-centered radical. Time-resolved IR spectroscopic measurements revealed efficient hydrogen atom transfer from xanthene, 9,10-dihydroanthracene, and 1,4-cyclohexadiene to Cp(CO)2Os(â¢) and (η(5)-(i)Pr4C5H)(CO)2Os(â¢) radicals, formed by photoinduced homolysis of the corresponding osmium dimers. The rate constants for hydrogen abstraction from these hydrocarbons are in the range 1.5 × 10(5) M(-1) s(-1) to 1.7 × 10(7) M(-1) s(-1) at 25 °C. For the first time, kinetic isotope effects for carbon-to-metal hydrogen atom transfer were determined. Large primary deuterium kinetic isotope effects of 13.4 ± 1.0 and 16.8 ± 1.4 were observed for the hydrogen abstraction from xanthene to form Cp(CO)2OsH and (η(5)-(i)Pr4C5H)(CO)2OsH, respectively, at 25 °C. Temperature-dependent measurements of the kinetic isotope effects over a 60 °C temperature range were carried out to obtain the difference in activation energies (E(D) - E(H)) and the pre-exponential factor ratio (A(H)/A(D)). For hydrogen atom transfer from xanthene to (η(5)-(i)Pr4C5H)(CO)2Os(â¢), the (E(D) - E(H)) = 3.3 ± 0.2 kcal mol(-1) and A(H)/A(D) = 0.06 ± 0.02 values suggest a quantum mechanical tunneling mechanism.
RESUMO
The discovery of catalysts capable of driving water oxidation at relatively low overpotential is a key challenge for efficient photoinduced water oxidation. The mononuclear Ru(II) polypyridyl complex (1) [Ru(NPM)(H2O)(pic)2](2+) (NPM = 4-tert-butyl-2,6-di-(1',8'-naphthyrid-2'-yl)-pyridine, pic = 4-picoline) has been examined as a catalyst for visible-light-driven water oxidation in a three-component homogeneous system containing [Ru(bpy)3](2+) as a photosensitizer, persulfate as a sacrificial electron acceptor and catalyst 1. In contrast to the well-established water oxidation mechanism via the nucleophilic attack of a water molecule on the high-energy [Ru(V)=O](3+) species, a lower-energy "direct pathway" for O-O bond formation via a [Ru(IV)=O](2+) intermediate was proposed for the first time for the catalyst 1 (Polyansky et al., J. Am. Chem. Soc., 2011, 133, 14649). In this report we successfully demonstrate that this unique proton-coupled low-energy pathway actually takes place with the use of a mild oxidant such as the photogenerated [Ru(bpy)3](3+) (1.26 V vs. NHE) to drive water oxidation. The overall quantum yield of 9%, TOF of 0.12 s(-1) and TON of 103 (limited solely by a drop in pH) were found for photochemical water oxidation with 1 using [Ru(bpy)3](2+) as a photosensitizer and [S2O8](2-) as a sacrificial electron acceptor. These values render catalyst 1 as one of the most active mononuclear ruthenium-based catalysts for light-driven water oxidation in a homogeneous system. The utilization of a pH-dependent pathway for water oxidation is a new and promising direction as a low-energy pathway. Furthermore, the detailed analysis of individual photochemical steps leading to O2 evolution provides benchmarks for future mechanistic studies of photo-induced water oxidation catalysis.
RESUMO
Electron transfer (ET) rate constants from the lowest excited state of the radical anion of benzoquinone, BQ(-â¢)*, were measured in THF solution. Rate constants for bimolecular electron transfer reactions typically reach the diffusion-controlled limit when the free-energy change, ΔG°, reaches -0.3 eV. The rate constants for ET from BQ(-â¢)* are one-to-two decades smaller at this energy and do not reach the diffusion-controlled limit until -ΔG° is 1.5-2.0 eV. The rates are so slow probably because a second electron must also undergo a transition to make use of the energy of the excited state. Similarly, ET, from solvated electrons to neutral BQ to form the lowest excited state, is slow, while fast ET is observed at a higher excited state, which can be populated in a transition involving only one electron. A simple picture based on perturbation theory can roughly account for the control of electron transfer by the need for transition of a second electron. The picture also explains how extra driving force (-ΔG°) can restore fast rates of electron transfer.
Assuntos
Ânions/química , Benzoquinonas/química , Elétrons , Transporte de Elétrons , Radicais Livres , Cinética , Estrutura MolecularRESUMO
The reactions of ketone/methionine systems are widely used as efficient and selective sources of biorelevant radical species. In this study, we address intramolecular variants of this couple with respect to its photosynthetic utility and as a mechanistic model of underlying elementary reaction steps of biological importance, especially with respect to the study of photoinitiated electron transport in complex peptides. The outcomes of this study are two-fold: (1) steady-state irradiation of sterically constrained benzophenone/methionine dyads afforded stable photocyclization products with high yield and product selectivity. (2) Mechanistic insights into the triplet-triggered product formation were obtained from an analysis of the flash photolysis results and the molecular structure of the stable product formed upon irradiation. Time-resolved experiments identified (net) hydrogen-atom transfer from the methionine as the mechanism of the triplet quenching and the resulting biradicals as the major precursor of the isolated stable product. Both the analyses of triplet quenching and stable-product formation in the diastereomeric pairs point to effects of chiral center configuration, i.e., significant stereoselectivity is observed for all elementary steps. The underlying stereochemical restraints were quantitatively addressed by means of molecular dynamics simulations.