Characterization of surface defects using a phase retrieval technique in a high-power laser system.

In the framework of high-power lasers, surface defects on optics can generate strong light intensification and induce damage sites on downstream optics. To evaluate this intensification during high-energy laser shots, a three-step method is proposed. First, a dedicated measurement bench is designed to measure the intensification induced by defects on a wide variety of optics, including amplifier slabs, KDP crystals, mirrors, gratings, and vacuum windows, for propagation distances up to 2000 mm. A multi-resolution single-beam multiple-intensity reconstruction phase retrieval algorithm is then used to reconstruct a model of the defect, in both amplitude and phase, from a set of intensification measurements. Finally, the impact of the modeled defect on downstream optics is evaluated with a simulation of the high-power laser system. This method is experimentally validated through a case study of damage identified on one of the Laser Mégajoule (LMJ) beams, characterized with the method presented in this paper. The long-distance impact on the LMJ beam is estimated by simulation and compared to a direct near-field measurement.

Large optics metrology for high-power lasers.

The Laser MégaJoule (LMJ) is a high-power laser dedicated to laser-plasma experiments. At the beginning of the project in the mid-1990s, an optical metrology laboratory was created at CEA to help accomplish all the steps in the construction of this laser. This paper proposes an overview of the capabilities of this metrology laboratory in four main fields: surface imperfections, photometry, laser damage measurement, and wavefront measurement. The specificities for high-power laser optics in each domain are highlighted as well as the specific features that make our instruments unique.

Impact of mechanical stress induced in silica vacuum windows on laser-induced damage.

At the interface between vacuum and air, optical windows must keep their optical properties, despite being subjected to mechanical stress. In this Letter, we investigate the impact of such stress on the laser-induced damage of fused silica windows at the wavelength of 351 nm in the nanosecond regime. Different stress values, from 1 to 30 MPa, both tensile and compressive, were applied. No effect of the stress on the laser-induced damage was evidenced.