Improving the upper atmospheric temperature accuracy of the ground-based instrument by eliminating noise ways.

In view of the special properties of the upper atmosphere at the altitude of 80-120 km, a ground-based passive remote sensing instrument ground-based airglow volume emission rate and temperature imaging interferometer (GBAVTII) is built to detect the atmospheric temperature used O 2(0-1) spectral line of night airglow at the altitude of 94 km. In the process of photographing the upper atmosphere airglow with the GBAVTII, the stray light (white noise) such as moonlight, city lights, and starlight will be affected. In this paper, the theoretical expression of denoising is derived based on the rotational line temperature measurement of diatomic O 2(0-1) airglow. Through a slight adjustment of different parameters in the forward equation of the GBAVTII and noise reduction in laboratory flat-field fine calibration, and other denoising methods in the GBAVTII image processing process, the maximum accuracy of the GBAVTII detection of the upper atmospheric temperature is enhanced to 2.4 K. Also, the minimum error of the GBAVTII detecting data with the satellite instrument sounding of atmosphere using broadband emission radiometry is 0.4 K. Thus, the absolute accuracy of the GBAVTII in detecting the upper atmospheric temperature can be improved to ±(0.4-2.4)K through the theory and method studied in this paper.

Effects of Water Availability on the Relationships Between Hydraulic and Economic Traits in the Quercus wutaishanica Forests.

Water availability is a key environmental factor affecting plant species distribution, and the relationships between hydraulic and economic traits are important for understanding the species' distribution patterns. However, in the same community type but within different soil water availabilities, the relationships in congeneric species remain ambiguous. In northwest China, Quercus wutaishanica forests in the Qinling Mountains (QM, humid region) and Loess Plateau (LP, drought region) have different species composition owing to contrasting soil water availability, but with common species occurring in two regions. We analyzed eight hydraulic traits [stomatal density (SD), vein density (VD), wood specific gravity (WSGbranch), lower leaf area: sapwood area (Al: As), stomatal length (SL), turgor loss point (ΨTlp), maximum vessel diameter (Vdmax) and height (Height)] and five economic traits [leaf dry matter content (LDMC), leaf tissue density (TD), leaf dry mass per area (LMA), Leaf thickness (LT) and maximum net photosynthetic rate (Pmax)] of congeneric species (including common species and endemic species) in Q. wutaishanica forests of QM and LP. We explored whether the congeneric species have different economic and hydraulic traits across regions. And whether the relationship between hydraulic and economic traits was determined by soil water availability, and whether it was related to species distribution and congeneric endemic species composition of the same community. We found that LP species tended to have higher SD, VD, WSGbranch, Al: As, SL, ΨTlp and Vdmax than QM species. There was a significant trade-off between hydraulic efficiency and safety across congeneric species. Also, the relationships between hydraulic and economic traits were closer in LP than in QM. These results suggested that relationships between hydraulic and economic traits, hydraulic efficiency and safety played the role in constraining species distribution across regions. Interestingly, some relationships between traits changed (from significant correlation to non-correlation) in common species across two regions (from LP to QM), but not in endemic species. The change of these seven pairs of relationships might be a reason for common species' wide occurrence in the two Q. wutaishanica forests with different soil water availability. In drought or humid conditions, congeneric species developed different types of adaptation mechanisms. The study helps to understand the environmental adaptive strategies of plant species, and the results improve our understanding of the role of both hydraulic and economic traits during community assembly.

Epigenetic memory and growth responses of the clonal plant Glechoma longituba to parental recurrent UV-B stress.

The responses of plants to recurrent stress may differ from their responses to a single stress event. In this study, we investigated whether clonal plants can remember past environments. Parental ramets of Glechoma longituba (Nakai) Kuprian were exposed to UV-B stress treatments either once or repeatedly (20 and 40 repetitions). Differences in DNA methylation levels and growth parameters among parents, offspring ramets and genets were analysed. Our results showed that UV-B stress reduced the DNA methylation level of parental ramets, and the reduction was enhanced by increasing the number of UV-B treatments. The epigenetic variation exhibited by recurrently stressed parents was maintained for a long time, but that of singly stressed parents was only short-term. Moreover, clonal plants responded to different UV-B stress treatments with different growth strategies. The one-time stress was a eustress that increased genet biomass by increasing offspring leaf allocation and defensive allocation in comparison to the older offspring. In contrast, recurring stress was a distress that reduced genet biomass, increased the biomass of storage stolons, and allocated more defensive substances to the younger ramets. This study demonstrated that the growth of offspring and genets was clearly affected by parental experience, and parental epigenetic memory and the transgenerational effect may play important roles in this effect.

Strong Environmental Filtering Based on Hydraulic Traits Occurring in the Lower Water Availability of Temperate Forest Communities.

The trait-based approaches have made progress in understanding the community assembly process. Here, we explore the key traits that may shape community assembly patterns of the same community type but within different water availabilities. Natural Quercus wutaishanica forests were chosen as a suitable study system to test the difference between economic and hydraulic traits across water availability on the Loess Plateau (LP, drought region) and Qinling Mountains (QL, humid region) of China. A total of 75 plots were established separately in two sites, and 12 functional traits (seven hydraulic traits and five economic traits) of 167 species were studied. Community-weighted mean trait values and functional diversity indices were compared between the two sites. Canonical component analysis was performed to infer whether the changes of community traits and their relationships are driven by intraspecific variation or species turnover. Evidence for likely community assembly processes was tested using the null model to determine whether functional structure among seven hydraulic traits and five economic traits was dominated by different ecological processes between two sites. We found that forests in the Loess Plateau and Qinling Mountains showed different hydraulic and economic traits. Hydraulic and economic traits coupled at the community level were driven by species turnover. Hydraulic traits showed more significant convergent patterns on LP than that in QL. Our results suggest a strong environmental filtering process occurred in hydraulic-based community assembly in the temperate forest with low water availability. Reveal the relationship of hydraulic and economic traits at the community level. Emphasize the critical role of multi-dimensional traits selecting like hydraulic traits in community ecology.

Simulation and observation for volume emission rates emitted from O2(0-1) and O(1S) nightglow in northwest China.

Being susceptible to the change of atmospheric conditions, the volume emission rate (VER) is very suitable to be used as a light source by passive remote sensing for measuring atmospheric wind and temperature. Thus, the VERs emitted from O2(0-1) and O(S1) of the nightglow at 80-120 km are studied in this paper. Based on the Naval Research Laboratory Mass Spectrometer Incoherent Scatter (NRLMSISE-00) model data and the ground-based airglow imaging interferometer (GBAII) instrument observation for a local time and place, simulated VER profiles represented by four layers are obtained for the nightglow of O2(0-1) and O(S1). The O2(0-1) nightglow model peak values at 94 km on 6 December 2013 and 8 November 2011 are 8111 photons·cm-3·s-1 and 8406 photons·cm-3·s-1, respectively; however, the O(S1) VER peak at a higher altitude of about 96 km on 18 December 2011 is only 338 photons·cm-3·s-1. The upper atmospheric VER values have been derived to transfer into the ground-based detected column intensities by our GBAII prototype. The calculated column integrated emission rates (IERs) of O2(0-1) for 0° and 45° zenith angles are 1.48×107 and 1.91×107 photons·cm-2·s-1, respectively; the calculated column IERs of O(S1) are 5.53×105 and 7.03×105 photons·cm-2·s-1, respectively. Correspondingly, the detected column IERs obtained by GBAII are 2.43×107 for O2(0-1) and 6.57×105 photons·cm-2·s-1 for O(S1).

[Study on the concentration of mineral oil in water by online intelligent detection based on fluorescence spectrum].

In order to monitor the oil pollution of water real time and accurately for the environmental protection, an intelligent online detection system for the mineral oil in water is put forward in the present paper, based on the technology of ultraviolet fluorescence and internet of things (IOT). For this system, the resolution can be improved by using the higher precision asymmetric Czemy-Turner monochromator; the impact of light fluctuations on the results of exploration can be corrected by a bunch reference light; the optical system deviation caused by the instrument vibration can be reduced by optical fiber transmission; the coupling efficiency of fiber and output signal can be increased by a special fiber beam; the real-time measurement, data processing and remote control can be achieved by the control module and wireless communication module. This system has characteristics of high integration, high precision and good stability etc. The concentration of the unknown sample can be accurately calculated by the methods of parallel algorithms of chemometric metrology and the calculation errors caused by different components can be reduced by the theory of chemical correction factor analysis. The fluorescence spectra of three kinds of sample solution, diesel, engine and crude oil in preparative concentration of 10, 25, 50 and 100 mg x L(-1) were measured by this system respectively. The absorption wavelengths of the above-mentioned three oils were measured to be 256, 365 and 397 nm by a grating spectrometer; their absorbances were measured to be 0.028, 0.036 and 0.041 by fluorescence spectrophotometer, respectively. Their fluorescence emission wavelengths are 355, 419 and 457 nm respectively. Finally the concentration detection limits of the mineral oil in water of diesel, engine and crude oil were obtained, i.e., 0.03, 0.04 and 0.06 mg x L(-1) respectively. Their relative errors are 2.1%, 1.0% and 2.8% respectively.

Fabrication of concave spherical microlenses on silicon by femtosecond laser irradiation and mixed acid etching.

All-silicon plano-concave microlens arrays with spherical profiles and good image performance were obtained using femtosecond laser direct irradiation and mixed acid etching. A femtosecond laser was employed to produce microhole arrays on silicon, and the microholes were expanded and smoothed by the mixed acid to form concave microlenses. The effects of the etching time, laser power, and pulse number on the microlens morphology were investigated. This method has potential applications in the fabrication of all-silicon plano-concave microlenses for use in infrared devices.