Catalysis in Energy and the Environment: Opportunities and Challenges.

Energy and the environment are the foundations of modern human society [...].

A ZBP1 isoform blocks ZBP1-mediated cell death.

ZBP1 is an interferon (IFN)-induced nucleic acid (NA) sensor that senses unusual Z-form NA (Z-NA) to promote cell death and inflammation. However, the mechanisms that dampen ZBP1 activation to fine-tune inflammatory responses are unclear. Here, we characterize a short isoform of ZBP1 (referred to as ZBP1-S) as an intrinsic suppressor of the inflammatory signaling mediated by full-length ZBP1. Mechanistically, ZBP1-S depresses ZBP1-mediated cell death by competitive binding with Z-NA for Zα domains of ZBP1. Cells from mice (Ripk1D325A/D325A) with cleavage-resistant RIPK1-induced autoinflammatory (CRIA) syndrome are alive but sensitive to IFN-induced and ZBP1-dependent cell death. Intriguingly, Ripk1D325A/D325A cells die spontaneously when ZBP1-S is deleted, indicating that cell death driven by ZBP1 is under the control of ZBP1-S. Thus, our findings reveal that alternative splicing of Zbp1 represents autogenic inhibition for regulating ZBP1 signaling and indicate that uncoupling of Z-NA with ZBP1 could be an effective strategy against autoinflammations.

Transcriptome analysis provides new insights into the immune response of Ruditapes philippinarum infected with Vibrio alginolyticus.

Manila clam (Ruditapes philippinarum) is a bivalve species with commercial value, but it is easily infected by pathogenic microorganisms in aquaculture, which restricts the shellfish industry. Notably, the impact of Vibrio alginolyticus on clam culture is obvious. In this study, RNA-seq was performed to analyze clam hepatopancreas tissue in 48 h (challenge group, G48h) and 96 h (challenge group, G96h) after infection with V. alginolyticus and 0 h after injection of PBS (control group, C). The results showed that a total of 1670 differentially expressed genes were detected in the G48h vs C group, and 1427 differentially expressed genes were detected in the G96h vs C group. In addition, KEGG analysis showed that DEGs were significantly enriched in pathways such as Lysosome and Mitophagy. Moreover, 15 immune related DEGs were selected for qRT-PCR analysis to verify the accuracy of RNA-seq, and the results showed that the expression level of DEGs was consistent with that of RNA-seq. Therefore, the results obtained in this study provides a preliminary understanding of the immune defense of R. philippinarum and molecular insights for genetic breeding of V. alginolyticus resistance in Manila clam.

Multifunctional Catalytic Hierarchical Interfaces of Ni12 P5 -Ni2 P Porous Nanosheets Enabled Both Sulfides Reaction Promotion and Li-Dendrite Suppression for High-Performance Li-S Full Batteries.

The development of lithium-sulfur (Li-S) batteries is very promising and yet faces the issues of hindered polysulfides conversion and Li dendrite growth. Different from using different materials strategies to overcome these two types of problems, here multifunctional catalytic hierarchical interfaces of Ni12 P5 -Ni2 P porous nanosheets formed by Ni2 P partially in situ converted from Ni12 P5 are proposed. The unique electronic structure in the interface endows Ni12 P5 -Ni2 P effective electrocatalysis effect toward both sulfides' reduction and oxidation through reducing Gibbs free energies, indicating a bidirectional conversion acceleration. Importantly, Ni12 P5 -Ni2 P porous nanosheets with hierarchical interfaces also reduced the Li nucleation energy barrier, and a dendrite-free Li deposition is realized during the overall Li deposition and stripping steps. To this end, Ni12 P5 -Ni2 P decorated carbon nanotube/S cathode showing a high capacity of over 1500 mAh g-1 , and a high rate capability of 8 C. Moreover, the coin full cell delivered a high capacity of 1345 mAh g-1 at 0.2 C and the pouch full cell delivered a high capacity of 1114 mAh g-1 at 0.2 C with high electrochemical stability during 180° bending. This work inspires the exploration of hierarchical structures of 2D materials with catalytically active interfaces to improve the electrochemistry of Li-S full battery.

Facile synthesis of CoOx@C/Ti-Fe2O3 photoanodes for efficient photoelectrochemical water oxidation.

The development of photoelectrochemical (PEC) water splitting is hindered by the slow kinetics of four-electron processes for the oxygen evolution reaction (OER) and severe charge recombination. Amorphous carbon was chosen as a carrier for the active sites due to its exceptional conductivity and strong loading capacity. In addition, this enhanced performance was attributed to the loading of oxides of cobalt. Here, amorphous carbon-covered cobalt oxides chosen as a co-catalyst loaded on α-Fe2O3 (noted as CoOx@C/Ti-Fe2O3) have been synthesized, and they show a high current density (2.86 mA cm-2 under 1.23 V vs. RHE), and a low onset potential (0.611 V vs. RHE). Experimental analysis demonstrates that the charge transfer and separation leading to accelerated OER dynamics and improved PEC performance are enhanced by CoOx@C effectively. This study provides new ideas for designing high-performance photoelectrochemical electrodes based on amorphous carbon co-catalysts.

Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges.

Since the huge breakthrough in 2018, research on halide solid-state electrolytes (SSEs) has set off a new craze. In comparison with oxide and sulfide SSEs, halide SSEs have more balanced properties in various aspects, including ionic conductivity, electrochemical stability window, and moisture resistance. Herein, the overall knowledge and deep understanding of halide SSEs and their practical applications in all-solid-state batteries (ASSBs) are introduced. Firstly, the principle of screening halide SSE components is proposed. Among F, Cl, Br and I anions, the Cl anion is excellent owing to its suitable ionic conductivity and electrochemical stability window. The Sc, Y, and lanthanide elements are also more compatible with Cl anions in terms of electronegativity. Secondly, the structural design theory of halide SSEs with high ionic conductivity and the mechanism of Li ion migration are described. A monoclinic structure is more conducive to Li ion migration, compared with trigonal and orthorhombic structures. Additionally, substitution strategies for halide SSEs are discussed, mainly including dual-halogen, isovalent cation substitution, and aliovalent cation substitution. Furthermore, the mechanism of moisture resistance and synthesis method of halide SSEs are analyzed. Compared with the solid-state reaction and mechanochemistry method, wet chemical synthesis is more likely to achieve scale-up production of halide SSEs. Finally, the application prospects and challenges of halide SSEs in ASSBs are outlined.

A Ratiometric Fluorescent Probe Based on RhB Functionalized Tb-MOFs for the Continuous Visual Detection of Fe3+ and AA.

In this study, a red-green dual-emitting fluorescent composite (RhB@MOFs) was constructed by introducing the red-emitting organic fluorescent dye rhodamine B (RhB) into metal-organic frameworks (Tb-MOFs). The sample can be used as a ratiometric fluorescent probe, which not only avoids errors caused by instrument and environmental instability but also has multiple applications in detection. The results indicated that the RhB@MOFs exhibited a turned-off response toward Fe3+ and a turned-on response for the continuous detection of ascorbic acid (AA). This ratiometric fluorescent probe possessed high sensitivity and excellent selectivity in the continuous determination of Fe3+ and AA. It is worth mentioning that remarkable fluorescence change could be clearly observed by the naked eye under a UV lamp, which is more convenient in applications. In addition, the mechanisms of Fe3+- and AA-induced fluorescence quench and recovery are discussed in detail. This ratiometric probe displayed outstanding recognition of heavy metal ions and biomolecules, providing potential applications for water quality monitoring and biomolecule determination.

A Novel Dye-Modified Metal-Organic Framework as a Bifunctional Fluorescent Probe for Visual Sensing for Styrene and Temperature.

A novel fluorescent probe (C460@Tb-MOFs) was designed and synthesized by encapsulating the fluorescent dye 7-diethylamino-4-methyl coumarin (C460) into a terbium-based metal-organic framework using a simple ultrasonic impregnation method. It is impressive that this dye-modified metal-organic framework can specifically detect styrene and temperature upon luminescence quenching. The sensing platform of this material exhibits great selectivity, fast response, and good cyclability toward styrene detection. It is worth mentioning that the sensing process undergoes a distinct color change from blue to colorless, providing conditions for the accurate visual detection of styrene liquid and gas. The significant fluorescence quenching mechanism of styrene toward C460@Tb-MOFs is explored in detail. Moreover, the dye-modified metal-organic framework can also achieve temperature sensing from 298 to 498 K with high relative sensitivity at 498 K. The preparation of functionalized MOF composites with fluorescent dyes provides an effective strategy for the construction of sensors for multifunctional applications.

Concurrent bullous pemphigoid and psoriasis vulgaris successfully treated with Janus kinase inhibitor tofacitinib: A case report and review of the literature.

Bullous pemphigoid (BP) and psoriasis are both immune-related skin diseases. Still, the comorbidities between the two are rare, and there is no consensus on the optimal treatment strategy for BP combined with psoriasis. JAK inhibitors are emerging, molecularly targeted therapeutic agents that target the molecule of Janus kinase, a signal transducer and activator of transcription (JAK/STAT). JAK inhibitors block intracellular signaling pathways by blocking the gene transcription of key pro-inflammatory cytokines that play a central role in the pathogenesis of many inflammatory and autoimmune diseases. Tofacitinib is a first-generation JAK inhibitor. The purpose of this article is to describe the first report of the use of tofacitinib in treating BP combined with psoriasis vulgaris with significant results. According to our findings, tofacitinib may be a safe and effective treatment option for patients suffering from BP and psoriasis together. The implications of this are substantial for the guidance of treatment strategies for both comorbid conditions.

Nano-biosensor for SARS-CoV-2/COVID-19 detection: methods, mechanism and interface design.

The epidemic of coronavirus disease 2019 (COVID-19) was a huge disaster to human society. The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which led to COVID-19, has resulted in a large number of deaths. Even though the reverse transcription-polymerase chain reaction (RT-PCR) is the most efficient method for the detection of SARS-CoV-2, the disadvantages (such as long detection time, professional operators, expensive instruments, and laboratory equipment) limit its application. In this review, the different kinds of nano-biosensors based on surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), field-effect transistor (FET), fluorescence methods, and electrochemical methods are summarized, starting with a concise description of their sensing mechanism. The different bioprobes (such as ACE2, S protein-antibody, IgG antibody, IgM antibody, and SARS-CoV-2 DNA probes) with different bio-principles are introduced. The key structural components of the biosensors are briefly introduced to give readers an understanding of the principles behind the testing methods. In particular, SARS-CoV-2-related RNA mutation detection and its challenges are also briefly described. We hope that this review will encourage readers with different research backgrounds to design SARS-CoV-2 nano-biosensors with high selectivity and sensitivity.

On Single-Model Transferable Targeted Attacks: A Closer Look at Decision-Level Optimization.

Known as a hard nut, the single-model transferable targeted attacks via decision-level optimization objectives have attracted much attention among scholars for a long time. On this topic, recent works devoted themselves to designing new optimization objectives. In contrast, we take a closer look at the intrinsic problems in three commonly adopted optimization objectives, and propose two simple yet effective methods in this paper to mitigate these intrinsic problems. Specifically, inspired by the basic idea of adversarial learning, we, for the first time, propose a unified Adversarial Optimization Scheme (AOS) to release both the problems of gradient vanishing in cross-entropy loss and gradient amplification in Po+Trip loss, and indicate that our AOS, a simple transformation on the output logits before passing them to the objective functions, can yield considerable improvements on the targeted transferability. Besides, we make a further clarification on the preliminary conjecture in Vanilla Logit Loss (VLL) and point out the problem of unbalanced optimization in VLL, in which the source logit may risk getting increased without the explicit suppression on it, leading to the low transferability. Then, the Balanced Logit Loss (BLL) is further proposed, where we take both the source logit and the target logit into account. Comprehensive validations witness the compatibility and the effectiveness of the proposed methods across most attack frameworks, and their effectiveness can also span two tough cases (i.e., the low-ranked transfer scenario and the transfer to defense methods) and three datasets (i.e., the ImageNet, CIFAR-10, and CIFAR-100). Our source code is available at https://github.com/xuxiangsun/DLLTTAA.

Applications of Catalytic Nanomaterials in Energy and Environment.

Nanotechnology is a crucial technology for the development of science and technology [...].

Study on Perforation Behavior of PTFE/Al Reactive Material Composite Jet Impacting Steel Target.

To study the penetration and cratering effect of reactive material composite jets, a series of experiments are carried out for the shaped charge (SC) with different composite liners damaging steel targets. The inner layer of composite liners is metal and the outer one is a polytetrafluoroethylene/aluminum (PTFE/Al) reactive material. Copper (Cu), titanium (Ti) and Al inner liners are used in this paper. The reactive material liner is composed of 73.5 wt.% PTFE and 26.5 wt.% Al powder through mass-matched ratios. Reactive material composite liners are prepared through machining, cold pressing and a sintering process. The SC mainly consists of a case, a composite liner, high-energy explosive and an initiator. The steel target is steel 45#, with a thickness of 66 mm. A standoff of 1.0 CD (charge diameter) is selected to conduct the penetration experiments. The experimental results show that when the inner layer of the composite liner is composed of Ti and Al, the hole diameters on the steel target formed by the reactive material composite jet are significantly larger than that of the inner Cu liner. By introducing the initiation delay time (τ) and detonation-like reaction model of PTFE/Al reactive materials, an integrated numerical simulation algorithm of the penetration and detonation-like effects of reactive material composite jets is realized. Numerical simulations demonstrate that the initial penetration holes on the steel targets are enlarged under the detonation-like effects of PTFE/Al reactive materials, and the simulated perforation sizes are in good agreement with the experimental results.

RAD54L promotes progression of hepatocellular carcinoma via the homologous recombination repair pathway.

Hepatocellular carcinoma (HCC) is a malignant tumor with high incidence worldwide. The underlying mechanisms remain poorly understood. The DNA metabolic process of homologous recombination repair (HRR) has been linked to a high probability of tumorigenesis and drug resistance. This study aimed to determine the role of HRR in HCC and identify critical HRR-related genes that affect tumorigenesis and prognosis. A total of 613 tumor and 252 para-carcinoma tissue samples were collected from The Cancer Genome Atlas (TCGA) and the International Cancer Genome Consortium (ICGC) to obtain differentially expressed genes (DEGs). HRR-related genes were assessed using gene enrichment and pathway analyses. Survival analysis was performed using the Kaplan-Meier method in the Gene Expression Profiling Interactive Analysis portal. The levels of RAD54L in the HRR pathway were detected by RT-qPCR and western blotting in para-carcinoma and HCC tissues and in L02 normal human liver cells and Huh7 HCC cells. Immunohistochemistry (IHC) was performed on the clinical specimens to determine the connection between gene expression and clinical features. Bioinformatics analysis revealed that the HRR pathway was enriched in HCC tissues. Upregulation of HRR pathway DEGs in HCC tissues was positively correlated with tumor pathological staging and negatively associated with patient overall survival. RAD54B, RAD54L, and EME1 genes in the HRR pathway were screened as markers for predicting HCC prognosis. RT-qPCR identified RAD54L as the most significantly expressed of the three genes. Western blotting and IHC quantitative analyses further demonstrated that RAD54L protein levels were higher in HCC tissues. IHC analysis of 39 pairs of HCC and para-carcinoma tissue samples also revealed an association between RAD54L and Edmondson-Steiner grade and the proliferation-related gene Ki67. The collective findings positively correlate RAD54L in the HRR signaling pathway with HCC staging and implicate RAD54L as a marker to predict HCC progression.

Monodisperse MoS2/Graphite Composite Anode Materials for Advanced Lithium Ion Batteries.

Traditional graphite anode material typically shows a low theoretical capacity and easy lithium decomposition. Molybdenum disulfide is one of the promising anode materials for advanced lithium-ion batteries, which possess low cost, unique two-dimensional layered structure, and high theoretical capacity. However, the low reversible capacity and the cycling-capacity retention rate induced by its poor conductivity and volume expansion during cycling blocks further application. In this paper, a collaborative control strategy of monodisperse MoS2/graphite composites was utilized and studied in detail. MoS2/graphite nanocomposites with different ratios (MoS2:graphite = 20%:80%, 40%:60%, 60%:40%, and 80%:20%) were prepared by mechanical ball-milling and low-temperature annealing. The graphite sheets were uniformly dispersed between the MoS2 sheets by the ball-milling process, which effectively reduced the agglomeration of MoS2 and simultaneously improved the electrical conductivity of the composite. It was found that the capacity of MoS2/graphite composites kept increasing along with the increasing percentage of MoS2 and possessed the highest initial discharge capacity (832.70 mAh/g) when MoS2:graphite = 80%:20%. This facile strategy is easy to implement, is low-cost, and is cosmically produced, which is suitable for the development and manufacture of advance lithium-ion batteries.