BRAF-V600E mutations in plasma and peripheral blood mononuclear cells correlate with prognosis of pediatric Langerhans cell histiocytosis treated with first-line therapy.

BACKGROUND: The clinical relevance of BRAF-V600E alleles in peripheral blood mononuclear cells (PBMCs) and the prognostic impact of the mutants in cell-free (cf) and PBMC DNAs of Langerhans cell histiocytosis (LCH) have not been fully clarified in pediatric LCH. METHODS: We retrospectively determined the levels of BRAF-V600E mutation in paired plasma and PBMC samples at the time of diagnosis of LCH. Subsequently, we performed a separate or combined analysis of the clinical and prognostic impact of the mutants. RESULTS: We assessed BRAF-V600E mutation in peripheral blood from 94 patients of childhood LCH. Our data showed that cfBRAF-V600E was related to young age, multiple-system (MS) disease, involvements of organs with high risk, increased risk of relapse, and worse progression-free survival (PFS) of patients. We also observed that the presence of BRAF-V600E in PBMCs at baseline was significantly associated with MS LCH with risk organ involvement, younger age, and disease progression or relapse. The coexisting of plasma(+)/PBMC(+) identified 36.2% of the patients with the worst outcome, and the hazard ratio was more significant than either of the two alone or neither, indicating that combined analysis of the mutation in plasma and PBMCs was more accurate to predict relapse than evaluation of either one. CONCLUSIONS: Concurrent assessment of BRAF-V600E mutation in plasma and PBMCs significantly impacted the prognosis of children with LCH. Further prospective studies with larger cohorts need to validate the results of this study.

Band 40/41 Surface Acoustic Wave Filters on 42°YX-Lithium Tantalate Substrate with Suppression of Transverse Leakage.

The transverse leakage of leaky surface acoustic waves (LSAWs) occurs on 42°YX-lithium tantalate substrates (42LT), which increases the insertion loss, narrows the bandwidth and flattens the roll-off of band 40/41 SAW filters and duplexers. In this work, LSAW characteristics with different metal materials and thicknesses are calculated by the finite element method (FEM), which determines the IDT material and thickness used for band 40/41 SAW filter design. To deeply understand transverse leakage and suppress it, the effects of different gap and dummy lengths on transverse leakage are simulated and discussed. Then, a new technique of using a wider dummy without any additional lithographic or depositing processes is proposed to suppress the leakage. Its effectiveness is validated by both simulations and experiments. Then, the technique is extended to applications of band 40 and 41 SAW filters. The experimental results show that with the wider dummy structure, the band 40 and 41 SAW filters achieve a more than 0.2 dB improvement in the insertion loss, a wider bandwidth and a steeper roll-off characteristic. This technique may also be extended to the other band SAW filter applications.

Development of a Deep-Learning Model for Diagnosing Lumbar Spinal Stenosis Based on CT Images.

STUDY DESIGN: Retrospective study. OBJECTIVES: This study aimed to develop an initial deep-learning (DL) model based on computerized tomography (CT) scans for diagnosing lumbar spinal stenosis. SUMMARY OF BACKGROUND DATA: Magnetic resonance imaging is commonly used for diagnosing lumbar spinal stenosis due to its high soft tissue resolution, but CT is more portable, cost-effective, and has wider regional coverage. Using DL models to improve the accuracy of CT diagnosis can effectively reduce missed diagnoses and misdiagnoses in clinical practice. MATERIALS AND METHODS: Axial lumbar spine CT scans obtained between March 2022 and September 2023 were included. The data set was divided into a training set (62.3%), a validation set (22.9%), and a control set (14.8%). All data were labeled by two spine surgeons using the widely accepted grading system for lumbar spinal stenosis. The training and validation sets were used to annotate the regions of interest by the two spine surgeons. First, a region of interest detection model and a convolutional neural network classifier were trained using the training set. After training, the model was preliminarily evaluated using a validation set. Finally, the performance of the DL model was evaluated on the control set, and a comparison was made between the model and the classification performance of specialists with varying levels of experience. RESULTS: The central stenosis grading accuracies of DL Model Version 1 and DL Model Version 2 were 88% and 83%, respectively. The lateral recess grading accuracies of DL Model Version 1 and DL Model Version 2 were 75% and 71%, respectively. CONCLUSIONS: Our preliminarily developed DL system for assessing the degree of lumbar spinal stenosis in CT, including the central canal and lateral recess, has shown similar accuracy to experienced specialist physicians. This holds great value for further development and clinical application.

[Estimation and Critical Source Area Identification of Non-point Source Pollution Based on Improved Export Coefficient Models: A Case Study of the Upper Beiyun River Basin].

Non-point source pollution(NSP) poses a great threat to water ecosystem health. The quantitative estimation of spatial distribution characteristics and accurate identification of critical source areas(CSAs) of NSP are the basis for its efficient and accurate control. The export coefficient model(ECM) has been widely used to assess NSP, but this model should be improved because it ignores pollutant loss in transport processes. In this study, the ECM, which refines the physical transport processes of pollutants through quantifying the loss rate of pollutants in runoff, sediment, and infiltration, was improved to assess NSP and identify CSAs. The simulation accuracy among Johnes ECM, frequent ECM, and improved ECM were analyzed, and the effects of the three models on the simulation results of both spatial distribution characteristics and CSAs were explored. The study showed that:① the simulation error of the improved ECM(-6.79%) was significantly lower than that of the Johnes ECM(50.44%) and the frequent ECM(-84.01%), and this improved ECM increased the simulation accuracy of NSP. ② The spatial distribution characteristics and CSAs of NSP obtained from Johnes, frequent, and improved ECMs were significantly different, and the simulation results of improved ECM were more consistent with the spatial characteristics of NSP in the watershed. The NSP was high in the southeast and low in the northwest of the basin, and the NSP mainly came from urban and cultivated land. ③ Based on the improved ECM, the CSAs of NSP in the basin were mainly distributed in Changping, Shahe, Shigezhuang, the north of Wenquan, and the west of Malianwa Street, accounting for 6.71% of the area. This study can provide an effective tool and scientific reference for the assessment and control of NSP in data-limited regions.

Chromosome-level genome assembly of sea scallop Placopecten magellanicus provides insights into the genetic characteristics and adaptive evolution of large scallops.

Placopecten magellanicus (Gmelin, 1791), a deep-sea Atlantic scallop, holds significant commercial value as a benthic marine bivalve along the northwest Atlantic coast. Recognizing its economic importance, the need to reconstruct its genome assembly becomes apparent, fostering insights into natural resources and generic breeding potential. This study reports a high-quality chromosome-level genome of P. magellanicus, achieved through the integration of Illumina short read sequencing, PacBio HiFi sequencing, and Hi-C sequencing techniques. The resulting assembly spans 1778 Mb with a scaffold N50 of 86.71 Mb. An intriguing observation arises - the genome size of P. magellanicus surpasses that of its Pectinidae family peers by 1.80 to 2.46 times. Within this genome, 28,111 protein-coding genes were identified. Comparative genomic analysis involving five scallop species unveils the critical determinant of this expanded genome: the proliferation of repetitive sequences recently inserted, contributing to its enlarged size. The landscape of whole genome collinearity sheds light on the relationships among scallop species, enhancing our broader understanding of their genomic framework. This genome provides genomic resources for future molecular biology research on scallops and serves as a guide for the exploration of longevity-related genes in scallops.

Complications and radiographic changes after implantation of interspinous process devices: average eight-year follow-up.

PURPOSE: This study aims to evaluate complications, clinical outcomes, and radiographic results following Coflex implantation. METHODS: We retrospectively studied 66 patients who had decompressive surgery combined with Coflex implantation to treat lumbar spinal stenosis. All imaging data were collected and examined for imaging changes. Clinical outcomes, included Oswestry Disability Index (ODI), back and leg visual analog scale (VAS) scores, were evaluated before surgery, six months after surgery and at the last follow-up. The number of complications occurring after five years of follow-up was counted. All reoperation cases were meticulously recorded. RESULTS: 66 patients were followed up for 5-14 years. The VAS and ODI scores were significantly improved compared with baseline. Heterotopic Ossification (HO) was detectable in 59 (89.4%). 26 (39.4%) patients had osteolysis at the contact site of Coflex with the spinous process. Coflex loosening was detected in 39 (60%) patients. Spinous process anastomosis was found in 34 (51.5%) patients. There was a statistically significant difference in the VAS score of back pain between patients with and without spinous process anastomosis. Nine cases of lumbar spinal restenosis were observed, and prosthesis fracture was observed in one case. CONCLUSION: Our study identified various imaging changes after Coflex implantation, and majority of them did not affect clinical outcomes. The majority of patients had HO, but osteolysis and Coflex loosening were relatively rare. The VAS score for back pain of these patients was higher if they have spinous process anastomosis. After five-year follow-up, we found lumbar spinal restenosis and prosthesis fracture cases.

Phage-derived anti-idiotype and anti-YTE antibodies in development of MK-1654 pharmacokinetic and immune response assays.

Background: MK-1654 is a fully human monoclonal antibody with YTE mutations currently in phase III clinical trials for prophylactic use in protecting infants from human respiratory syncytial virus infection. Materials & methods: We generated anti-idiotype (anti-ID) and anti-YTE antibodies against MK-1654 by panning with MorphoSys HuCal phage libraries, and used the antibodies in the development of MK-1654 pharmacokinetic (PK) and immune response (IR) assays. Results: Detection of MK-1654 in nonhuman primate and human nasal wash samples showed combined use of anti-ID and anti-YTE antibodies can deliver desired sensitivity and accuracy in PK studies. IR studies showed anti-ID can serve as suitable positive control in neutralizing antibody assays. Conclusion: Phage-derived anti-IDs and anti-YTEs are suitable for PK and IR assays.

Development and qualification of cell-based relative potency assay for a human respiratory syncytial virus (RSV) mRNA vaccine.

Respiratory syncytial virus (RSV) is a leading cause of severe lower respiratory tract infections worldwide. A safe and effective RSV vaccine has been an elusive goal but recent advances in vaccine technology have improved the likelihood that a vaccine for the prevention of RSV could be licensed in near future. We have developed an RSV vaccine V171 consisting of four lipids and messenger ribonucleic acid (mRNA) encoding an engineered form of the RSV F protein stabilized in its prefusion conformation. The lipids form lipid nanoparticles (LNP) with mRNA encapsulated during process, which protects the mRNA from degradation and enables the mRNA to be delivered into mammalian cells. Once inside the cells, the mRNA then can be translated into RSV F protein and elicit both humoral and cellular immune responses. Preclinical results and Phase I clinical trial results indicate that this mRNA vaccine targeting RSV F protein is a promising RSV vaccine approach and should be further evaluated in clinical trials. We have developed a cell-based relative potency assay to support the Phase II development of this vaccine. Test articles and a reference standard are tested with serial dilutions in a 96-well plate pre-seeded with Hep G2 cells. Cells were incubated for 16-18 h after transfection and then permeabilized and stained with a human monoclonal antibody specific to RSV F protein, followed by a fluorophore-conjugated secondary antibody. The plate is then analyzed for percentage of transfected cells and relative potency of the test article is calculated by comparing its EC50 to that of a reference standard. This assay takes advantage of the fact that due to the inherent variability in biological test systems an absolute measure of potency is more variable than a measure of activity relative to a standard. Targeting testing relative potency range 25-250 %, our assay showed an R2 close to 1 for linearity, relative bias of 1.05-5.41 %, and intermediate precision of 11.0 %. The assay has been used for testing of process development samples, formulation development samples, as well as drug product intermediate (DPI) and drug product (DP) in support of Phase II development of our RSV mRNA vaccine.

[Effects of Green, Blue, and Blue-green Roofs on Runoff Quality].

Roofs occupy a great proportion of urban impervious surfaces, and the implementation of eco-roof construction in urban areas is beneficial to alleviate the ecological and environmental problems caused by rapid urbanization. In this study, different eco-roofs (i.e., 68.6%-90.7%, and 39.8%-54.5%, respectively. However, all the eco-roofs were sources of NO-3-N, DCr, DFe, and DNi. The blue roof was a sink of DCu (with a pollutant load reduction rate of 21.9%) and did not affect the cumulative load of PO3-4-P in runoff. However, the green roof and blue-green roof were the sources of PO3-4-P and DCu. The RQI value of the blue roof was the highest, followed by that of the blue-green roof and green roof. The RQI value of the green roof was significantly lower than that of the blue and blue-green roofs (P<0.05). These results indicated that the runoff quality of the blue roof was the best, whereas that of the green roof was the worst. Adding a storage layer to the green roofs could significantly improve the runoff quality. The results of this study provide scientific references for the selection and design of eco-roof facilities.

The association between vertical laminar fracture and recurrent kyphosis after implant removal of Thoracolumbar burst fracture: a retrospective study.

BACKGROUND: Surgeons often encounter recurrent kyphosis of Cobb angle following thoracolumbar burst fracture surgery. Some factors affecting postoperative correction loss have been studied in previous studies, but few have examined the relationship between laminar fractures and postoperative loss of correction. METHODS: The clinical data of 86 patients with thoracolumbar burst fracture who met the inclusion criteria and were admitted to our Department of Spine Surgery between 2013 and 2020 was retrospectively analyzed. To examine the association between laminar fracturs and postoperative correction loss, demographic and radiographic characteristics of the two groups were analyzed. RESULTS: The presence or absence of laminar fractures was statistically different between the two groups (P < 0.05). Binary logistic regression analysis showed that laminar fractures and preoperative Cobb were statistically significant in the two groups. There were statistically significant differences in the degree of injury of laminar fractures in the coronal plane between the two groups (P < 0.05). CONCLUSION: This study investigated that the presence or absence of laminar fractures and preoperative Cobb contribute to loss of correction after thoracolumbar burst fracture surgery. There was a statistically significant difference between full-length and partial-length laminar fractures on the loss of postoperative correction of thoracolumbar burst fractures with laminar fractures.

Optimization of Surface Acoustic Wave Resonators on 42°Y-X LiTaO3/SiO2/Poly-Si/Si Substrate for Improved Performance and Transverse Mode Suppression.

SAW devices with a multi-layered piezoelectric substrate have excellent performance due to advantages such as a high quality factor, Q, low loss insertion, large bandwidth, etc. Prior to manufacturing, a comprehensive analysis and proper design are essential to evaluating the device's key performance indicators, including the Bode Q value, bandwidth, and transverse mode suppression. This study explored the performance of SAW resonators employing a 42°Y-X LiTaO3 (LT) thin-plate-based multi-layered piezoelectric substrate. The thicknesses for each layer of the 42°Y-X LT/SiO2/poly-Si/Si substrate were optimized according to the index of phase velocity, Bode Q value, and bandwidth. The effect of the device structure parameters on the dispersion curve and slowness curve was studied, and a flat slowness curve was found to be favorable for transverse mode suppression. In addition, the design of the dummy configuration was also optimized for the suppression of spurious waves. Based on the optimized design, a one-port resonator on the 42°Y-X LT/SiO2/poly-Si/Si substrate was fabricated. The simulation results and measurements are presented and compared, which provides guidelines for the design of new types of SAW devices configured with complex structures.

A high-quality chromosome-level genome assembly of the bivalve mollusk Mactra veneriformis.

Mactra veneriformis (Bivalvia: Mactridae) is a bivalve mollusk of major economic importance in China. Decreased natural yields of M. veneriformis have led to an urgent need for genomic resources. To address this problem and the currently limited knowledge of molecular evolution in this genus, we here report a high-quality chromosome-level genome assembly of M. veneriformis. Our approach yielded a 939.32 Mb assembled genome with an N50 contig length of 7,977.84 kb. Hi-C scaffolding of the genome resulted in assembly of 19 pseudochromosomes. Repetitive elements made up ∼51.79% of the genome assembly. A total of 29,315 protein-coding genes (PCGs) were predicted in M. veneriformis. Construction of a genome-level phylogenetic tree demonstrated that M. veneriformis and Ruditapes philippinarum diverged around 231 million years ago (MYA). Inter-species comparisons revealed that 493 gene families have undergone expansion and 449 have undergone contraction in the M. veneriformis genome. Chromosome-based macrosynteny analysis revealed a high degree of synteny between the 19 chromosomes of M. veneriformis and those of Patinopecten yessoensis. These results suggested that M. veneriformis has a similar karyotype to that of P. yessoensis, and that a highly conserved 19-chromosome karyotype was formed in the early differentiation stages of bivalves. In summary, the genomic resources generated in this work serve as a valuable reference for investigating the molecular mechanisms underlying biological functions in M. veneriformis and will facilitate future genetic improvement and disease treatment in this economically important species. Furthermore, the assembled genome greatly improves our understanding of early genomic evolution of the Bivalvia.

Correlations of Computed Tomography Measurement of Distal Pulmonary Vascular Pruning with Airflow Limitation and Emphysema in COPD Patients.

Background: Pulmonary vascular alteration is an important feature of chronic obstructive pulmonary disease (COPD), which is characterized by distal pulmonary vascular pruning in angiography. We aimed to further investigate the clinical relevance of pulmonary vasculature in COPD patients using non-contrast computed tomography (CT). Methods: Seventy-one control subjects and 216 COPD patients completed the questionnaires, spirometry, and computed tomography (CT) scans within 1 month and were included in the study. Small pulmonary vessels represented by percentage of cross-sectional area of pulmonary vessels smaller than 5 mm2 or 5-10 mm2 to the total lung fields (%CSA<5 or %CSA5-10, respectively) were measured using ImageJ software. Spearman correlation was used to investigate the relationship between %CSA<5 and airflow limitation. A receiver operating characteristic (ROC) curve was built to evaluate the value of %CSA<5 in discriminating COPD patients from healthy control subjects. Segmented regression was used to analyze the relationship between %CSA<5 and %LAA-950 (percentage of low-attenuation areas less than -950 HU). Results: We found a significant correlation between %CSA<5 and forced expiratory volume in one second (FEV1) percentage of predicted value (%pred) (r = 0.564, P < 0.001). The area under the ROC curve for the value of %CSA<5 in distinguishing COPD was 0.816, with a cut-off value of 0.537 (Youden index J, 0.501; sensitivity, 78.24%; specificity, 71.83%). Since the relationship between %CSA<5 and %LAA-950 was not constant, performance of segmented regression was better than ordinary linear regression (adjusted R2, 0.474 vs 0.332, P < 0.001 and P < 0.001, respectively). As %CSA<5 decreased, %LAA-950 slightly increased until an inflection point (%CSA<5 = 0.524) was reached, after which the %LAA-950 increased apparently with a decrease in %CSA<5. Conclusion: %CSA<5 was significantly correlated with both airflow limitation and emphysema, and we identified an inflection point for the relationship between %CSA<5 and %LAA-950.

Superior pancreatic lymphadenectomy with portal vein priority via posterior common hepatic artery approach in laparoscopic radical gastrectomy.

BACKGROUND: D2 lymph node dissection for advanced gastric cancer is advocated, and station 8p lymph node should be considered in selected patients, which is, however, technically difficult. AIM: To introduce a new and easy-to-perform procedure for dissection of the lymph nodes superior to the pancreas. METHODS: A series of patients who underwent laparoscopic gastrectomy for gastric cancer were retrospectively included with utilization of a new procedure for superior pancreatic lymphadenectomy (LND) with portal vein priority via the posterior common hepatic artery approach (SPLD-PPPH) based on a newly defined portal triangle. The surgical outcome of the patients, as well as the efficacy and safety of SPLD-PPPH are reported. RESULTS: A total of 51 patients were included with most of them being male (n = 34, 66.7%). According to the 8th edition of AJCC TNM staging, there were four (7.8%) patients in stage I, 13 (25.5%) in stage II, 33 (64.7%) in stage III and one (2.0%) in stage IV. The average duration for LND was about 1 h (67.7 ± 6.9 min). After surgery, four patients developed morbidities, but all were treated successfully with no perioperative mortality. Among the 51 patients included, the percentage of patients who had lymph node metastasis at station 8p was 9.8%. Of note, with a total of 14 lymph nodes harvested at station 8p, the incidence of nodal metastasis was 14.3%. CONCLUSION: About one in 10 patients with advanced gastric cancer had nodal metastasis at station 8p. The new approach of SPLD-PPPH is safe and effective for D2+ LND during laparoscopic radical gastrectomy.

Dietary Cholesterol Supplements Disturb Copper Homeostasis in Multiple Organs in Rabbits: Aorta Copper Concentrations Negatively Correlate with the Severity of Atherosclerotic Lesions.

Dietary cholesterol causes atherosclerosis along with a reduction of copper concentrations in the atherosclerosis wall. This study was to determine the relationship between aorta copper concentrations and the severity of atherosclerotic lesions as well as copper homeostasis in multiple organs in cholesterol-fed rabbits. Male New Zealand white rabbits, 10-week-old and averaged 2.0 kg, were fed a diet containing 1% (w/w) cholesterol or the same diet without cholesterol as controls. Twelve weeks after the feeding, aortic atherosclerotic lesions, serum cholesterol, and multiple organ copper concentrations were measured. Compared to controls, rabbits fed cholesterol-supplemented diet displayed higher serum cholesterol levels and developed atherosclerosis. Copper concentrations in the cholesterol-fed rabbits were increased in the serum and kidney but decreased in the atherosclerosis wall and multiple organs, including heart, liver, spleen, and lung. Furthermore, aorta copper concentrations negatively correlated, respectively, with the severity of the atherosclerotic lesion (r = - 0.64, p = 0.01), the microscope atherosclerotic lesion area (r = - 0.60, p = 0.02), and the stenosis of the lumen (r = - 0.54, p = 0.04). Dietary cholesterol not only causes atherosclerosis but also disturbs copper homeostasis in multiple organ systems. The negative correlation between aorta copper concentrations and the severity of atherosclerotic lesions suggests a vicious cycle between copper reduction and the pathogenesis of atherosclerosis. These changes in copper homeostasis would be additive to atherosclerosis as a risk factor for cardiovascular disease in humans.

Mechanical Performance of Single-Graded Copolymer-Modified Pervious Concrete in a Corrosive Environment.

Polymer-modified cement has found numerous applications due to its excellent tensile strength. When cement was modified with a single polymer, its tensile strength and performance marginally increased. However, when a small amount of the flexible polymer latex was added to cement, the mechanical performance of cement considerably improved. In this study, single-graded copolymer-modified pervious concrete was prepared by mixing styrene-butadiene rubber (SBR) with different acrylate polymers, and its mechanical performance and durability were systematically studied through mechanical tests and theoretical analyses. The main findings are as follows: (1) When a waterborne emulsion was added, the freeze resistance of cement concrete increased, and its mass loss rate decreased. Cement concrete with two latexes had higher sulphate corrosion resistance and substantially lower dry shrinkage strain than ordinary cement concrete. (2) Through scanning electron microscopy, the microstructural changes in the cement binder, ordinary polymer-modified concrete, and the copolymer-modified cement concrete used in this study were observed, and the findings were compared with those reported in the literature. (3) Single-graded copolymer-modified pervious concrete exhibited excellent shrinkage performance. This study showed that single-graded copolymer-modified pervious concrete satisfied the performance requirements for use as a paving material for special cases.

Novel adjuvants enhance immune responses elicited by a replication-defective human cytomegalovirus vaccine in nonhuman primates.

Adjuvants have long been explored to enhance vaccine efficacy. Current adjuvants approved for human vaccines are mostly studied for their ability to improve antibody responses. There remains a need for development of novel adjuvants, especially those able to enhance cell-mediated immunity (CMI). In this preclinical study we assessed the effect of two novel adjuvants, a delta inulin microparticle Advax formulated with or without a toll-like receptor 9 (TLR9) agonist CpG oligonucleotide, and a Merck & Co., Inc., Kenilworth, NJ, USA proprietary lipid nanoparticle (LNP), on immune responses elicited by V160, an experimental replication-defective human cytomegalovirus vaccine. Adult rhesus macaques were immunized with a low dose of V160 (10 units) either alone or in combination with the adjuvants as compared to those immunized with a high dose of V160 alone (100 units). While neither adjuvant conferred a significant benefit to vaccine-elicited humoral immune responses at the dose tested, both enhanced cellular immune responses to V160, where Advax promoted both CD4+ and CD8+ T cells and LNP predominantly impacted the CD4+ T cell response. Transcriptome analyses of peripheral blood samples demonstrated different modes of action for these adjuvants. One day post vaccination, LNP induced upregulation of a large number of genes involved in the innate immune response similar to those triggered by viral infection. In contrast, Advax did not activate any known inflammatory pathways and did not significantly impact gene expression pattern until day 7 post administration, suggesting a unique, non-inflammatory mechanism. These data warrant further exploration of Advax and LNP as adjuvants in clinical trials for vaccines desiring to elicit both humoral and T cell responses.

Toughness Behavior of SBR Acrylate Copolymer-Modified Pervious Concrete with Single-Sized Aggregates.

Pervious concrete is an eco-efficient concrete but has problems regarding its mechanical performance and permeability balance. This research investigated the feasibility of using a combination of styrene-butadiene rubber (SBR) and acrylate polymer to improve the toughness of pervious concrete while keeping its permeability. Single-sized aggregate and no sand were considered in the concrete mixture. Acrylate polymers with different solid content, PH, density, and viscosity were emulsion copolymerized with an SBR polymer. Eleven scenarios with different mix proportions and 220 specimens for compressive strength, flexural strength, flexural stiffness, impact resistance, and fracture toughness tests were selected to evaluate the effects of the copolymer on the toughness of copolymer-modified pervious concrete (CMPC). The studies showed that (1) the influence trend of the copolymers generally varied according to different mechanical indexes; (2) XG-6001 acrylate polymer mainly and comprehensively enhanced the toughness of the CMPC; (3) it was difficult to increase the enhancing property of the XG-6001 acrylate polymer with the growth of its mix proportion; (4) the zero-sand pervious concrete with 90% SBR and 10% XG-6001 acrylate emulsion copolymerization proved to have relatively high toughness. The proposed CMPC holds promising application value in sustainability traffic road construction.

Atherosclerotic lesion-specific copper delivery suppresses atherosclerosis in high-cholesterol-fed rabbits.

Dietary cholesterol supplements cause hypercholesterolemia and atherosclerosis along with a reduction of copper concentrations in the atherosclerotic wall in animal models. This study was to determine if target-specific copper delivery to the copper-deficient atherosclerotic wall can block the pathogenesis of atherosclerosis. Male New Zealand white rabbits, 10-weeks-old and averaged 2.0 kg, were fed a diet containing 1% (w/w) cholesterol or the same diet without cholesterol as control. Twelve weeks after the feeding, the animals were injected with copper-albumin microbubbles and subjected to ultrasound sonication specifically directed at the atherosclerotic lesions (Cu-MB-US) for target-specific copper delivery, twice a week for four weeks. This regiment was repeated 3 times with a gap of two weeks in between. Two weeks after the last treatment, the animals were harvested for analyses of serum and aortic pathological changes. Compared to controls, rabbits fed cholesterol-rich diet developed atherosclerotic lesion with a reduction in copper concentrations in the lesion tissue. Cu-MB-US treatment significantly increased copper concentrations in the lesion, and reduced the size of the lesion. Furthermore, copper repletion reduced the number of apoptotic cells as well as the content of cholesterol and phospholipids in the atherosclerotic lesion without a disturbance of the stability of the lesion. The results thus demonstrate that target-specific copper supplementation suppresses the progression of atherosclerosis at least in part through preventing endothelial cell death, thus reducing lipid infiltration in the atherosclerotic lesion.

[Analysis of Spatial-Temporal Variation Characteristics of Potential Non-point Source Pollution Risks in the Upper Beiyun River Basin Using Different Weighting Methods].

Non-point source pollution has become an important factor affecting the aquatic ecological environment and human health, and the analysis of spatial-temporal variations in non-point source pollution risks is an important prerequisite for pollution control. Based on land-use and land-cover data from 1980 to 2020, the potential non-point source pollution index (PNPI) model was applied in the upper Beiyun River Basin using different weighting methods. The results showed that:① The potential risk of non-point source pollution is high in the southeast and low in the northwest of the basin. Between 1980 and 2020, the total area of extremely high-risk and high-risk non-point source pollution regions showed a decreasing trend, and the main types of land use for extremely high-risk and high-risk regions gradually evolved from paddy fields, drylands, and orchards to urban and rural residential land; ② The weighting of the land use index determined by the mean-square deviation decision, entropy, coefficient of variation, and expert scoring methods was largest among the three PNPI indices, with average weightings of 0.46, 0.53, 0.45, and 0.48, respectively. However, the weightings for runoff and distance indices determined by different weighting methods were notably different, and the proportions of regions with different levels of non-point source pollution risk also varied; ③ The exponential function method, which describes the relationship between source factors and transport factors by constructing the exponential functions of land use, runoff, and distance indices, provided results that are more consistent with the spatial distribution characteristics of non-point source pollution risk in the basin. The proportions of extremely low-risk and extremely high-risk regions are 54.22% and 6.23%, respectively. These results provide scientific reference for risk analysis and the control of non-point source pollution in this basin.