Chemical Structure and Shape Enhance MR Imaging-Guided X-ray Therapy Following Marginative Delivery.

Ineffective site-specific delivery has seriously impeded the efficacy of nanoparticle-based drugs to a disease site. Here, we report the preparation of three different shapes (sphere, scroll, and oblate) to systematically evaluate the impact of the marginative delivery on the efficacy of magnetic resonance (MR) imaging-guided X-ray irradiation at a low dose of 1 Gy. In addition to the shape effect, the therapeutic efficacy is investigated for the first time to be strongly related to the structure effect that is associated with the chemical activity. The enhanced particle-vessel wall interaction of both the flat scroll and oblate following margination dynamics leads to greater accumulation in the lungs, resulting in superior performance over the sphere against lung tumor growth and suppression of lung metastasis. Furthermore, the impact of the structural discrepancy in nanoparticles on therapeutic efficacy is considered. The tetragonal oblate reveals that the feasibility of the charge-transfer process outperforms the orthorhombic scroll and cubic sphere to suppress tumors. Finally, surface area is also a crucial factor affecting the efficacy of X-ray treatments from the as-prepared particles.

Efficient DNA-Driven Nanocavities for Approaching Quasi-Deterministic Strong Coupling to a Few Fluorophores.

Strong coupling between light and matter is the foundation of promising quantum photonic devices such as deterministic single photon sources, single atom lasers, and photonic quantum gates, which consist of an atom and a photonic cavity. Unlike atom-based systems, a strong coupling unit based on an emitter-plasmonic nanocavity system has the potential to bring these devices to the microchip scale at ambient conditions. However, efficiently and precisely positioning a single or a few emitters into a plasmonic nanocavity is challenging. In addition, placing a strong coupling unit on a designated substrate location is a demanding task. Here, fluorophore-modified DNA strands are utilized to drive the formation of particle-on-film plasmonic nanocavities and simultaneously integrate the fluorophores into the high field region of the nanocavities. High cavity yield and fluorophore coupling yield are demonstrated. This method is then combined with e-beam lithography to position the strong coupling units on designated locations of a substrate. Furthermore, polariton energy under the detuning of fluorophore embedded nanocavities can fit into a model consisting of three sets of two-level systems, implying vibronic modes may be involved in the strong coupling. Our system makes strong coupling units more practical on the microchip scale and at ambient conditions and provides a stable platform for investigating fluorophore-plasmonic nanocavity interaction.

Hierarchical Nanoparticle Assemblies Formed via One-Step Catalytic Stamp Pattern Transfer.

The one-step catalytic stamp pattern transfer process is described for producing arrays of hierarchical nanoparticle assemblies. The method simply combines in situ nanoparticle synthesis triggered by free residual Si-H groups on PDMS stamps and the lift-off pattern transfer technique. No additional nanoparticle synthesis procedure is required before the pattern transfer process. Exquisitely uniform and precisely spaced hierarchical nanoparticle assemblies with designed geometry can be rapidly produced using the catalytic stamp pattern transfer process. Sequential catalytic stamp pattern transfer also is described to generate multilayered, hierarchical nanoparticle assemblies with various geometries. The hierarchical nanoparticle assemblies catalytically transferred onto the surface are not just nanoparticles but nanoparticle-polydimethylsiloxane residue composites. The in situ-synthesized nanoparticles retain optical properties. The hierarchical nanoparticle assemblies with precisely controlled geometry further show potential in the application of surface-enhanced Raman scattering. The capability of one-step catalytic stamp pattern transfer allows the scalable and reproducible fabrication of well-defined hierarchical nanoparticle assemblies.

Facile Functionalization of Polymer Surfaces in Aqueous and Polar Organic Solvents via 3-Mercaptopropylsilatrane.

Surface modification of a polymer substrate with a mercapto functionality is crucial in many applications such as flexible circuitry and point-of-care biosensors. We present here a novel bifunctional molecular adhesive, 3-mercaptopropylsilatrane (MPS), as an interface between polymer and metal surfaces. Under ambient conditions, surface modification of polymer surfaces with a mercapto functionality can be achieved with low concentration (0.46 mM) of MPS in aqueous solvent (50% ethanol) in a short time (<30 min). Three popular polymers for optical sensors, polycarbonate, polyethylene terephthalate, and poly(methyl methacrylate), were employed as substrates, and MPS films formed on these substrates were examined and compared with that on a glass substrate. The films were characterized by UV-vis spectroscopy, water contact angle, X-ray photoelectron spectroscopy, and atomic force microscopy. MPS was also used as a bifunctional linker for the construction of a gold nanoparticle (AuNP) sub-monolayer on these polymer surfaces. Under optimized preparation conditions, the absorbance and full width at half-maximum of the plasmon band are comparable to those of a AuNP-modified glass substrate. Hence, MPS may have a potential to be a key component in polymer substrate-based localized surface plasmon resonance sensors. A self-catalytic surface reaction mechanism is also proposed to account for the results. As compared to a glass surface with a high number of silanol groups, the successful formation of an MPS film on polymer surfaces with relatively few reactive sites is probably due to the lateral polymerization of MPS starting from a condensed MPS molecule on a reactive site of a polymer surface.

Steroid Probes Conjugated with Protein-Protected Gold Nanocluster: Specific and Rapid Fluorescence Imaging of Steroid Receptors in Target Cells.

Steroid ligands can easily diffuse through the cell membrane and this property makes it feasible to be used for in-situ staining of the nuclear receptors. However, nonspecific binding of the internalized ligand probe with the cellular components has caused serious interferences for the detection of receptor-expressing cells. We report a novel gold nanocluster (AuNC)-conjugated estrogen probe that can eliminate nonspecific internalization and accelerate nuclear localization to achieve selective and rapid detection of estrogen receptors (ERs) in live cells. The AuNC, protected by bovine serum albumin (BSA), BSA-AuNCs, was prepared by the synthesis and confirmed to be 1.9 nm in core size and 18 nm in diameter. Ethinyl estradiol was used as the precursor of 17ß-estradial (E2) to conjugate with BSA-protected AuNCs via polyethylene glycol linker (E2-PEG/BSA-AuNCs) or to conjugate with Cy3 dyes (E2-Cy3). The conjugated probe was determined to contain five E2 molecules per BSA-AuNC by mass spectrometry and exhibit an emission maximum of around 640 nm, which was not altered by E2 conjugation indicating that the structural integrity of BSA-AuNCs was conserved. E2-PEG/BSA-AuNCs probes were quickly internalized by MCF-7 (ER+) cells and localized to the nuclei in 2 h. Such internalization was sensitive to competition by free E2 and was rarely detected in the controls using either non-conjugated BSA-AuNCs in MCF-7 (ER+) cells or E2-PEG/BSA-AuNCs in MDA-MB-231 (ER-) cells. In contrast to the high specificity of E2-PEG/BSA-AuNCs probe, the uptake of E2-Cy3 probe could not differentiate between MCF-7(ER+) and MDA-MB-231(ER-) cells during the early phases of the treatment. Moreover, nuclear targeting by E2-Cy3 was three times slower than that by the E2-PEG/BSA-AuNC probe. Such accelerated nuclei targeting was consistent with the enhanced cell viability by conjugating E2 with BSA-AuNC. In conclusion, the E2-PEG/BSA-AuNC probes are promising candidates that can be used for the detection of ER+ tumor tissues and the same strategy can be applied to fabricate other steroid probes.

Engineered Nanostructures of Haptens Lead to Unexpected Formation of Membrane Nanotubes Connecting Rat Basophilic Leukemia Cells.

A recent finding reports that co-stimulation of the high-affinity immunoglobulin E (IgE) receptor (FcεRI) and the chemokine receptor 1 (CCR1) triggered formation of membrane nanotubes among bone-marrow-derived mast cells. The co-stimulation was attained using corresponding ligands: IgE binding antigen and macrophage inflammatory protein 1α (MIP1 α), respectively. However, this approach failed to trigger formation of nanotubes among rat basophilic leukemia (RBL) cells due to the lack of CCR1 on the cell surface (Int. Immunol. 2010, 22 (2), 113-128). RBL cells are frequently used as a model for mast cells and are best known for antibody-mediated activation via FcεRI. This work reports the successful formation of membrane nanotubes among RBLs using only one stimulus, a hapten of 2,4-dinitrophenyl (DNP) molecules, which are presented as nanostructures with our designed spatial arrangements. This observation underlines the significance of the local presentation of ligands in the context of impacting the cellular signaling cascades. In the case of RBL, certain DNP nanostructures suppress antigen-induced degranulation and facilitate the rearrangement of the cytoskeleton to form nanotubes. These results demonstrate an important scientific concept; engineered nanostructures enable cellular signaling cascades, where current technologies encounter great difficulties. More importantly, nanotechnology offers a new platform to selectively activate and/or inhibit desired cellular signaling cascades.

In situ fabrication of cleavable peptide arrays on polydimethylsiloxane and applications for kinase activity assays.

Polydimethylsiloxane (PDMS) is widely used for microfabrication and bioanalysis; however, its surface functionalization is limited due to the lack of active functional groups and incompatibility with many solvents. We presented a novel approach for in situ fabrication of cleavable peptide arrays on polydimethylsiloxane (PDMS) viatert-butyloxycarbonyl (t-Boc)/trifluoroacetic acid (TFA) chemistry using gold nanoparticles (AuNPs) as the anchor and a disulfide/amine terminated hetero-polyethylene glycol as the cleavable linker. The method was fine tuned to use reagents compatible with the PDMS. Using 5-mer pentapeptide, Trp5, as a model, step-by-step covalent coupling during the reaction cycles was monitored by Attenuated total reflectance-Fourier transform infrared spectrometer (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), or atomic force microscopy (AFM), and further confirmed by mass spectrometry (MS) detection of the cleaved peptides. Using such a method, heptapeptides of the PKA substrate, LRRASLG (Kemptide), and its point mutated analogs were fabricated in an array format for comparative studies of cAMP-dependent protein kinase (PKA) activity. Based on on-chip detection, Kemptide sequence exhibited the highest phosphorylation activity, which was detected to a 1.5-time lesser extent for the point mutated sequence (LRRGSLG) containing the recognition motif (RRXS), and was nearly undetectable for another point mutated sequence (LRLASLG) that lacked the recognition motif. These results indicate that the reported fabrication method is able to yield highly specific peptide sequences on PDMS, leading to a highly motif-sensitive enzyme activity assay.

Particle Lithography Enables Fabrication of Multicomponent Nanostructures.

Multicomponent nanostructures with individual geometries have attracted much attention because of their potential to carry out multiple functions synergistically. The current work reports a simple method using particle lithography to fabricate multicomponent nanostructures of metals, proteins, and organosiloxane molecules, each with its own geometry. Particle lithography is well-known for its capability to produce arrays of triangular-shaped nanostructures with novel optical properties. This paper extends the capability of particle lithography by combining a particle template in conjunction with surface chemistry to produce multicomponent nanostructures. The advantages and limitations of this approach will also be addressed.

Near-field scanning optical microscopy enables direct observation of Moiré effects at the nanometer scale.

This work reports probing the Moiré effect directly at the nanometer scale via near-field scanning optical microscopy (NSOM). Periodic metal nanostructures of Au and Cu have been produced sequentially using particle lithography, and the overlapped regions serve as Moiré patterns at nanometer scale. The Moiré effect in these regions can be directly visualized from NSOM images, from which periodicity and structural details are accurately determined. In addition, the near-field Moiré effect was found to be very sensitive to structural changes, such as lateral displacement and/or rotations of the two basic arrays with respect to each other. Further, nanostructures of Cu exhibited higher photon transmission than Au from NSOM images. Collectively, NSOM enables direct visualization of the Moiré effect at nanoscale levels, from optical read out, and without enhancements or modification of the structures. The results demonstrate the feasibility to extend applications of the Moiré effect-based techniques to nanometer levels.

Nanostructures of designed geometry and functionality enable regulation of cellular signaling processes.

Extracellular matrices (ECM) triggered cellular signaling processes often begin with the clustering of the cellular receptors such as integrin and FcεRI. The sizes of these initial protein complexes or clusters are tens to 100 nm in dimension; therefore, engineered nanostructures could provide effective mimics of ECM for investigation and control of the initial and downstream specific signaling processes. This current topic discusses recent advances in nanotechnology in the context of design and production of matching chemical functionality and geometry for control of specific cellular signaling processes. Two investigations are reported to demonstrate this concept: (a) how the presentation of antigen at the nanometer scale would influence the aggregation of FcεRI, which would impact the formation of activation complexes, leading to the rearrangement of actin in cytoskeleton and degranulation or activation of mast cells; (b) how the engineered nanostructure could guide the initial integrin clustering, which would impact the formation of focal adhesion and downstream cell signaling cascades, leading to polarization, migration, and morphological changes. Complementary to engineered ECMs using synthetic ligands or peptides, or topographic control at the micrometer scale, nanostructures of designed geometry and chemical functionality provide new and effective biochemical cues for regulation of cellular signaling processes and downstream behaviors.

Engineered nanostructures of antigen provide an effective means for regulating mast cell activation.

Nanostructures containing 2,4-dinitrophenyl (DNP) as antigen were designed and produced to investigate antibody-mediated activation of mast cells. The design consists of nanogrids of DNP termini inlaid in alkanethiol self-assembled monolayers (SAMs). Using scanning probe-based nanografting, nanometer precision was attained for designed geometry, size, and periodicity. Rat basophilic leukemia (RBL) cells exhibited high sensitivity to the geometry and local environment of DNP presented on these nanostructures. The impact included cellular adherence, spreading, membrane morphology, cytoskeleton structure, and activation. The highest level of spreading and activation was induced by nanogrids of 17 nm line width and 40 nm periodicity, with DNP haptens 1.4 nm above the surroundings. The high efficacy is attributed to two main factors. First, DNP sites in the nanostructure are highly accessible by anti-DNP IgE during recognition. Second, the arrangement or geometry of DNP termini in nanostructures promotes clustering of FcεRI receptors that are prelinked to IgE. The clustering effectively initiates Lyn-mediated signaling cascades, ultimately leading to the degranulation of RBL cells. This work demonstrates an important concept: that nanostructures of ligands provide new and effective cues for directing cellular signaling processes.

Nanostructures of functionalized gold nanoparticles prepared by particle lithography with organosilanes.

Periodic arrays of organosilane nanostructures were prepared with particle lithography to define sites for selective adsorption of functionalized gold nanoparticles. Essentially, the approach for nanoparticle lithography consists of procedures with two masks. First, latex mesospheres were used as a surface mask for deposition of an organosilane vapor, to produce an array of holes within a covalently bonded, organic thin film. The latex particles were readily removed with solvent rinses to expose discrete patterns of nanosized holes of uncovered substrate. The nanostructured film of organosilanes was then used as a surface mask for a second patterning step, with immersion in a solution of functionalized nanoparticles. Patterned substrates were fully submerged in a solution of surface-active gold nanoparticles coated with 3-mercaptopropyltrimethoxysilane. Regularly shaped, nanoscopic areas of bare substrate produced by removal of the latex mask provided sites to bind silanol-terminated gold nanoparticles, and the methyl-terminated areas of the organosilane film served as an effective resist, preventing nonspecific adsorption on masked areas. Characterizations with atomic force microscopy demonstrate the steps for lithography with organosilanes and functionalized nanoparticles. Patterning was accomplished for both silicon and glass substrates, to generate nanostructures with periodicities of 200-300 nm that match the diameters of the latex mesospheres of the surface masks. Nanoparticles were shown to bind selectively to uncovered, exposed areas of the substrate and did not attach to the methyl-terminal groups of the organosilane mask. Billions of well-defined nanostructures of nanoparticles can be generated using this high-throughput approach of particle lithography, with exquisite control of surface density and periodicity at the nanoscale.

Automated scanning probe lithography with n-alkanethiol self-assembled monolayers on Au(111): application for teaching undergraduate laboratories.

Controllers for scanning probe instruments can be programmed for automated lithography to generate desired surface arrangements of nanopatterns of organic thin films, such as n-alkanethiol self-assembled monolayers (SAMs). In this report, atomic force microscopy (AFM) methods of lithography known as nanoshaving and nanografting are used to write nanopatterns within organic thin films. Commercial instruments provide software to control the length, direction, speed, and applied force of the scanning motion of the tip. For nanoshaving, higher forces are applied to an AFM tip to selectively remove regions of the matrix monolayer, exposing bare areas of the gold substrate. Nanografting is accomplished by force-induced displacement of molecules of a matrix SAM, followed immediately by the surface self-assembly of n-alkanethiol molecules from solution. Advancements in AFM automation enable rapid protocols for nanolithography, which can be accomplished within the tight time restraints of undergraduate laboratories. Example experiments with scanning probe lithography will be described in this report that were accomplished by undergraduate students during laboratory course activities and research internships in the chemistry department of Louisiana State University. Students were introduced to principles of surface analysis and gained "hands-on" experience with nanoscale chemistry.

Automated scanning probe lithography with n-alkanethiol self assembled monolayers on Au(111): Application for teaching undergraduate laboratories.

Controllers for scanning probe instruments can be programmed for automated lithography to generate desired surface arrangements of nanopatterns of organic thin films, such as n-alkanethiol self-assembled monolayers (SAMs). In this report, atomic force microscopy (AFM) methods of lithography known as nanoshaving and nanografting are used to write nanopatterns within organic thin films. Commercial instruments provide software to control the length, direction, speed, and applied force of the scanning motion of the tip. For nanoshaving, higher forces are applied to an AFM tip to selectively remove regions of the matrix monolayer, exposing bare areas of the gold substrate. Nanografting is accomplished by force-induced displacement of molecules of a matrix SAM, followed immediately by the surface self-assembly of n-alkanethiol molecules from solution. Advancements in AFM automation enable rapid protocols for nanolithography, which can be accomplished within the tight time restraints of undergraduate laboratories. Example experiments with scanning probe lithography (SPL) will be described in this report that were accomplished by undergraduate students during laboratory course activities and research internships in the chemistry department of Louisiana State University. Students were introduced to principles of surface analysis and gained "hands-on" experience with nanoscale chemistry.

Engineering the spatial selectivity of surfaces at the nanoscale using particle lithography combined with vapor deposition of organosilanes.

Particle lithography is a practical approach to generate millions of organosilane nanostructures on various surfaces, without the need for vacuum environments or expensive instrumentation. This report describes a stepwise chemistry route to prepare organosilane nanostructures and then apply the patterns as a spatially selective foundation to attach gold nanoparticles. Sites with thiol terminal groups were sufficiently small to localize the attachment of clusters of 2-5 nanoparticles. Basic steps such as centrifuging, drying, heating, and rinsing were used to generate arrays of regular nanopatterns. Close-packed films of monodisperse latex spheres can be used as an evaporative mask to spatially direct the placement of nanoscopic amounts of water on surfaces. Vapor phase organosilanes deposit selectively at areas of the surface containing water residues to generate nanostructures with regular thickness, geometry, and periodicity as revealed in atomic force microscopy images. The area of contact underneath the mesospheres is effectively masked for later synthetic steps, providing exquisite control of surface coverage and local chemistry. By judicious selection in designing the terminal groups of organosilanes, surface sites can be engineered at the nanoscale for building more complex structures. The density of the nanopatterns and surface coverage scale predictably with the diameter of the mesoparticle masks. The examples presented definitively illustrate the capabilities of using the chemistry of molecularly thin films of organosilanes to spatially define the selectivity of surfaces at very small size scales.

Detecting the magnetic response of iron oxide capped organosilane nanostructures using magnetic sample modulation and atomic force microscopy.

A new imaging strategy using atomic force microscopy (AFM) is demonstrated for mapping magnetic domains at size regimes below 100 nm. The AFM-based imaging mode is referred to as magnetic sample modulation (MSM), since the flux of an AC-generated electromagnetic field is used to induce physical movement of magnetic nanomaterials on surfaces during imaging. The AFM is operated in contact mode using a soft, nonmagnetic tip to detect the physical motion of the sample. By slowly scanning an AFM probe across a vibrating area of the sample, the frequency and amplitude of vibration induced by the magnetic field is tracked by changes in tip deflection. Thus, the AFM tip serves as a force and motion sensor for mapping the vibrational response of magnetic nanomaterials. Essentially, MSM is a hybrid of contact mode AFM combined with selective modulation of magnetic domains. The positional feedback loop for MSM imaging is the same as that used for force modulation and contact mode AFM; however, the vibration of the sample is analyzed using channels of a lock-in amplifier. The investigations are facilitated by nanofabrication methods combining particle lithography with organic vapor deposition and electroless deposition of iron oxide, to prepare designed test platforms of magnetic materials at nanometer length scales. Custom test platforms furnished suitable surfaces for MSM characterizations at the level of individual metal nanostructures.

Indirect modulation of nonmagnetic probes for force modulation atomic force microscopy.

Frequency-dependent changes for phase and amplitude images are demonstrated with test platforms of organosilane ring patterns, using force modulation atomic force microscopy (FM-AFM) with an alternate instrument configuration. The imaging setup using indirect magnetic modulation (IMM) is based on indirect oscillation of soft, nonmagnetic cantilevers, with spring constants <1 N m(-1). The tip is driven to vibrate by the motion of a tip holder assembly which contains ferromagnetic materials. The entire tip assembly is induced to vibrate with the flux of an external ac electromagnetic field, supplied by a wire coil solenoid placed underneath the sample plate. With the use of IMM, dynamic parameters of the driving frequencies and amplitude of the tip motion can be optimized to sensitively map the elastic response of samples. An advantage of this instrument setup is that a magnetic coating is not required to drive the periodic oscillation of the tip. The instrument configuration for IMM may not be practical for intermittent imaging modes, which often work best with stiff cantilevers. However, indirect actuation provides an effective approach for imaging with low force setpoints and is well-suited for dynamic AFM modes using continuous contact imaging.

Nanostructures of octadecyltrisiloxane self-assembled monolayers produced on Au111 using particle lithography.

Preparing high-quality self-assembled monolayers (SAMs) of organosilanes on conductive metal substrates such as gold is problematic because of the hydrophobic nature of the surface under ambient conditions. Trace amounts of water are required for a surface hydrolysis reaction to form siloxane bridges to the metal substrate. We describe an approach using sequential steps of ultraviolet (UV) irradiation, particle lithography, and chemical vapor deposition of octadecyltrichlorosilane (OTS) to successfully prepare silane nanostructures on Au111 surfaces. Pretreatment of gold films with UV irradiation renders the surface to be sufficiently hydrophilic for particle lithography. Close-packed films of monodisperse latex mesospheres provide an evaporative mask to spatially direct the placement of nanoscopic amounts of water on surfaces. Vapor-phase organosilanes deposit selectively at areas of the surface containing water residues to produce millions of nanopatterns with regular thickness, geometry, and periodicity. Atomic force microscopy (AFM) images reveal that OTS binding is localized to areas defined by water residues. The spacing between adjacent nanopatterns is determined by the periodicity of the latex mask; however, the dimensions of the nanostructures are confined to a narrow contact area of the water meniscus, which surrounds the base of the latex spheres. The siloxane nanostructures on Au111 furnish an excellent model surface for AFM characterizations, as demonstrated with current-sensing measurements.

Controlling the surface coverage and arrangement of proteins using particle lithography.

AIMS: The applicability of particle lithography with monodisperse mesospheres is tested with various proteins to control the surface coverage and dimensions of protein nanopatterns. METHODS & MATERIALS: The natural self-assembly of monodisperse spheres provides an efficient, high-throughput route to prepare protein nanopatterns. Mesospheres assemble spontaneously into organized crystalline layers when dried on flat substrates, which supply a structural frame or template to direct the placement of proteins. The template particles are displaced with a simple rinsing step to disclose periodic arrays of protein nanopatterns on surfaces. RESULTS & DISCUSSION: The proteins are attached securely to the surface, forming nanopatterns with a measured thickness of a single layer. The morphology and diameter of the protein nanostructures can be tailored by selecting the diameter of the mesospheres and choosing the protein concentration. CONCLUSIONS: Particle lithography is shown to be a practical, highly reproducible method for patterning proteins on surfaces of mica, glass and gold. High-throughput patterning was achieved with ferritin, apoferritin, bovine serum albumin and immunoglobulin-G. Depending on the ratio of proteins to mesospheres, either porous films or ring structures were produced. This approach can be applied for fundamental investigations of protein-binding interactions of biological systems in surface-bound bioassays and biosensor surfaces.

Self-assembled monolayer initiated electropolymerization: a route to thin-film materials with enhanced photovoltaic performance.

Continuing progress in the field of organic polymer photovoltaic (PV) devices requires the development of new materials with better charge-transport efficiency. To improve this parameter, we have investigated surface-attached bilayer polymer PV thin films prepared starting from a covalently attached monolayer of an electroactive initiator using sequential electropolymerization of dithiophene and its derivatives. These systems were found to show significantly increased photocurrent generation quantum yields as compared to systems made through conventional approaches. In addition, the described PV thin films possess remarkable mechanical, air, and photostability. These properties likely arise from the more uniform and better ordered bulk layer morphologies as well as tighter covalently bonded contacts at the interfacial junctions, contributing to improved charge transport. While more studies on the fundamental reasons behind the discovered phenomenon are currently underway, this information can be readily applied to build more efficient organic polymer photovoltaics.