A Single-Component Janus Zwitterionic Hydrogel Patch with a Bionic Microstructure for Postoperative Adhesion Prevention.

The development of anti-adhesion hydrogels for preventing postoperative adhesions is an ongoing challenge, particularly in achieving a balance between exceptional antifouling properties and effective in situ tissue retention. In this study, we propose a unique approach with the design of a single-component Janus zwitterionic hydrogel patch featuring a bionic microstructure. The Janus patches were prepared through free radical polymerization of sulfobetaine methacrylate with N, N'-methylenebis(2-propenamide) as the cross-linker. The incorporation of hexagonal facets separated by interconnecting grooves on one side imparts durable and reliable in situ retention capabilities to the Janus hydrogel patch when it is applied to traumatized tissues. The opposing flat surface exhibits outstanding resistance to bacteria, proteins, and cell adhesion, due to the superhydrophilicity and excellent antifouling characteristics of zwitterionic polymers. This dual functionality empowers the Janus hydrogel patch to mitigate adhesions between traumatized and surrounding tissues. The hexagonal and groove bionic microstructures facilitate rapid drainage, promoting swift contact with the tissue for increased adhesion strength, while independent hexagonal microfacets enhance the peeling energy. In an in vivo setting, Janus zwitterionic hydrogel patches with surface microstructures form mutually embedded structures with the cecum surface, minimizing the likelihood of slippage and detachment. Remarkably, in vivo experiments involving abdominal wall cecum injuries illustrate the Janus zwitterionic hydrogel patch's superior anti-adhesion effectiveness compared to commercial controls. Thus, the Janus hydrogel patch, distinguished by its bionic microstructure surface, presents substantial potential in the biomedical field for averting postoperative adhesions.

Personal Thermoregulation by Moisture-Engineered Materials.

Personal thermal management can effectively manage the skin microenvironment, improve human comfort, and reduce energy consumption. In personal thermal-management technology, owing to the high latent heat of water evaporation in wet-response textiles, heat- and moisture-transfer coexist and interact with each other. In the last few years, with rapid advances in materials science and innovative polymers, humidity-sensitive textiles have been developed for personal thermal management. However, a large gap exists between the conceptual laboratory-scale design and actual textile. Here, moisture-responsive textiles based on flap opening and closing, those based on yarn/fiber deformation, and sweat-evaporation regulation based on textile design for personal thermoregulation are reviewed, and the corresponding mechanisms and research progress are discussed. Finally, the existing engineering and scientific limitations and future developments are considered to resolve the existing issues and accelerate the practical application of moisture-responsive textiles and related technologies.

Injectable Asymmetric Adhesive-Antifouling Bifunctional Hydrogel for Peritoneal Adhesion Prevention.

Peritoneal adhesion is a common problem after abdominal surgery and can lead to various medical problems. In response to the lack of in situ retention and pro-wound healing properties of existing anti-adhesion barriers, this work reports an injectable adhesive-antifouling bifunctional hydrogel (AAB-hydrogel). This AAB-hydrogel can be constructed by "two-step" injection. The tissue adhesive hydrogel based on gallic acid-modified chitosan and aldehyde-modified dextran is prepared as the bottom hydrogel (B-hydrogel) by Schiff base reaction. The aldehyde-modified zwitterionic dextran/carboxymethyl chitosan-based hydrogel is formed on the B-hydrogel surface as the antifouling top hydrogel (T-hydrogel). The AAB-hydrogel exhibits good bilayer binding and asymmetric properties, including tissue adhesive, antifouling, and antimicrobial properties. To evaluate the anti-adhesion effect in vivo, the prepared hydrogels are injected onto the wound surface of a mouse abdominal wall abrasion-cecum defect model. Results suggest that the AAB-hydrogel has antioxidant capacity and can reduce the postoperative inflammatory response by modulating the macrophage phenotype. Moreover, the AAB-hydrogel could effectively inhibit the formation of postoperative adhesions by reducing protein deposition, and resisting fibroblast adhesions and bacteria attacking. Therefore, AAB-hydrogel is a promising candidate for the prevention of postoperative peritoneal adhesions.

Integration of daytime radiative cooling and solar heating.

In recent years, sustainable energy development has become a major theme of research. The combination of solar heating and daytime radiative cooling has the potential to build a competitive strategy to alleviate current environmental and energy problems. Several studies on the combination of daytime radiative cooling and solar heating have been reported to improve energy utilization efficiency. However, most integrations still have a low solar/mid-infrared spectrum regulation range, low heating/cooling performance, and poor stability. To promote this technology further for real-world applications, herein we summarize the latest progress, technical features, bottlenecks, and future opportunities for the current integration of daytime radiative cooling and solar heating through the switch mode (including electrical, thermal-responsive, and mechanical regulations) and collaborative mode.

Interfacial Solar Steam/Vapor Generation for Heating and Cooling.

Interfacial solar steam/vapor technology uses abundant and clean solar energy and water to achieve heating and cooling, a promising technology to alleviate environmental and energy issues. To obtain higher conversion and utilization efficiency, designing and optimizing materials, structures, and devices of interfacial solar steam/vapor technologies attract the attention of the research community. Given the significant progress made in the past 5 years, it is valuable to systematically summarize and discuss recent developments and future trends in this new multidisciplinary direction. This review aims to introduce interfacial solar steam/vapor principles to realize heating and cooling and the recent progress in materials, structures, devices, and applications. Meanwhile, some unsolved scientific and technical problems with outlook will also be discussed, hoping to promote further the rapid development and application of interfacial solar steam/vapor technology in heating and cooling to alleviate energy and environmental problems.

Metalized polyamide heterostructure as a moisture-responsive actuator for multimodal adaptive personal heat management.

Personal thermal management textile/wearable is an effective strategy to expand the indoor temperature setpoint range to reduce a building's energy consumption. Usually, textiles/wearables that were engineered for controlling conduction, convection, radiation, or sweat evaporation have been developed separately. Here, we demonstrate a multimodal adaptive wearable with moisture-responsive flaps composed of a nylon/metal heterostructure, which can simultaneously regulate convection, sweat evaporation, and mid-infrared emission to accomplish large and rapid heat transfer tuning in response to human perspiration vapor. We show that the metal layer not only plays a crucial role in low-emissivity radiative heating but also enhances the bimorph actuation performance. The multimodal adaptive mechanism expands the thermal comfort zone by 30.7 and 20.7% more than traditional static textiles and single-modal adaptive wearables without any electricity and energy input, making it a promising design paradigm for personal heat management.

A scalable fish-school inspired self-assembled particle system for solar-powered water-solute separation.

Complete separation of water and solute is the ultimate goal of water treatment, for maximized resource recycling. However, commercialized approaches such as evaporative crystallizers consume a large amount of electricity with a significant carbon footprint, leading to calls for alternative energy-efficient and eco-friendly strategies. Here, inspired by schooling fish, we demonstrate a collective system self-assembled by expanded polystyrene (EPS)-core/graphene oxide (GO)-shell particles, which enables autonomous, efficient and complete water-solute separation powered by sunlight. By taking advantage of surface tension, these tailored particles school together naturally and are bonded as a system to function collectively and coordinatively, to nucleate, grow and output salt crystals continuously and automatically out of even saturated brine, to complete water-solute separation. Solar-vapor conversion efficiency over 90% and salt production rate as high as 0.39 kg m-2 h-1 are achieved under 1-sun illumination for this system. It reduces the carbon footprint of ∼50 kg for treating 1-ton saturated brine compared with the commercialized approaches.

Subambient daytime radiative cooling textile based on nanoprocessed silk.

Decreasing energy consumption is critical to sustainable development. Because temperature regulation for human comfort consumes vast amounts of energy, substantial research efforts are currently directed towards developing passive personal thermal management techniques that cool the human body without any energy consumption1-9. Although various cooling textile designs have been proposed previously, textile-based daytime radiative cooling to a temperature below ambient has not been realized6-13. Silk, a natural protein fabric produced by moth caterpillars, is famous for its shimmering appearance and its cooling and comforting sensation on skin14-17. It has been recently recognized that silk, with its optical properties derived from its hierarchical microstructure, may represent a promising starting point for exploring daytime radiative cooling18-21. However, the intrinsic absorption of protein in the ultraviolet region prevents natural silk from achieving net cooling under sunlight. Here we explore the nanoprocessing of silk through a molecular bonding design and scalable coupling reagent-assisted dip-coating method, and demonstrate that nanoprocessed silk can achieve subambient daytime radiative cooling. Under direct sunlight (peak solar irradiance >900 W m-2) we observed a temperature of ~3.5 °C below ambient (for an ambient temperature of ~35 °C) for stand-alone nanoprocessed silks. We also observed a temperature reduction of 8 °C for a simulated skin when coated with nanoprocessed silk, compared with natural silk. This subambient daytime radiative cooling of nanoprocessed silk was achieved without compromising its wearability and comfort. This strategy of tailoring natural fabrics through scalable nanoprocessing techniques opens up new pathways to realizing thermoregulatory materials and provides an innovative way to sustainable energy.

A Triple-Mode Midinfrared Modulator for Radiative Heat Management of Objects with Various Emissivity.

Thermal management is ubiquitous in the modern world and indispensable for a sustainable future. Radiative heat management provides unique advantages because the heat transfer can be controlled by the surface. However, different object emissivities require different tuning strategies, which poses challenges to develop dynamic and universal radiative heat management devices. Here, we demonstrate a triple-mode midinfrared modulator that can switch between passive heating and cooling suitable for all types of object surface emissivities. The device comprises a surface-textured infrared-semiabsorbing elastomer coated with a metallic back reflector, which is biaxially strained to sequentially achieve three fundamental modes: emission, reflection, and transmission. By analyzing and optimizing the coupling between optical and mechanical properties, we achieve a performance as follows: emittance contrast Δε = 0.58, transmittance contrast Δτ = 0.49, and reflectance contrast Δρ = 0.39. The device can provide a new design paradigm of radiation heat regulation for wearable, robotics, and camouflage technologies.

Advances in Solar-Driven Hygroscopic Water Harvesting.

Water scarcity is one of the greatest global challenges at this time. Significant efforts have been made to harvest water from the air, due to widely available water sources present in the atmosphere. Particularly, solar-driven hygroscopic water harvesting based on the adsorption-desorption process has gained tremendous attention because of the abundance of solar energy in combination with substantial improvements in conversion efficiency enabled by advanced sorbents, improved photothermal materials, interfacial heating system designs, and thermal management in recent years. Here, recent developments in atmospheric water harvesting are discussed, with a focus on solar-driven hygroscopic water harvesting. The diverse structural designs and engineering strategies that are being used to improve the rate of the water production, including the design principles for sorbents with high adsorption capacity, high-efficiency light-to-heat conversion, optimization of thermal management, vapor condensation, and water collection, are also explored. The current challenges and future research opportunities are also discussed, providing a roadmap for the future development of solar-driven hygroscopic water harvesting technology.

Integration of daytime radiative cooling and solar heating for year-round energy saving in buildings.

The heating and cooling energy consumption of buildings accounts for about 15% of national total energy consumption in the United States. In response to this challenge, many promising technologies with minimum carbon footprint have been proposed. However, most of the approaches are static and monofunctional, which can only reduce building energy consumption in certain conditions and climate zones. Here, we demonstrate a dual-mode device with electrostatically-controlled thermal contact conductance, which can achieve up to 71.6 W/m2 of cooling power density and up to 643.4 W/m2 of heating power density (over 93% of solar energy utilized) because of the suppression of thermal contact resistance and the engineering of surface morphology and optical property. Building energy simulation shows our dual-mode device, if widely deployed in the United States, can save 19.2% heating and cooling energy, which is 1.7 times higher than cooling-only and 2.2 times higher than heating-only approaches.

Minimized lithium trapping by isovalent isomorphism for high initial Coulombic efficiency of silicon anodes.

Silicon demonstrates great potential as a next-generation lithium ion battery anode because of high capacity and elemental abundance. However, the issue of low initial Coulombic efficiency needs to be addressed to enable large-scale applications. There are mainly two mechanisms for this lithium loss in the first cycle: the formation of the solid electrolyte interphase and lithium trapping in the electrode. The former has been heavily investigated while the latter has been largely neglected. Here, through both theoretical calculation and experimental study, we demonstrate that by introducing Ge substitution in Si with fine compositional control, the energy barrier of lithium diffusion will be greatly reduced because of the lattice expansion. This effect of isovalent isomorphism significantly reduces the Li trapping by ~70% and improves the initial Coulombic efficiency to over 90%. We expect that various systems of battery materials can benefit from this mechanism for fine-tuning their electrochemical behaviors.

An Interfacial Solar-Driven Atmospheric Water Generator Based on a Liquid Sorbent with Simultaneous Adsorption-Desorption.

Water scarcity is one of the greatest challenges facing human society. Because of the abundant amount of water present in the atmosphere, there are significant efforts to harvest water from air. Particularly, solar-driven atmospheric water generators based on sequential adsorption-desorption processes are attracting much attention. However, incomplete daytime desorption is the limiting factor for final water production, as the rate of water desorption typically decreases very quickly with decreased water content in the sorbents. Hereby combining tailored interfacial solar absorbers with an ionic-liquid-based sorbent, an atmospheric water generator with a simultaneous adsorption-desorption process is generated. With enhanced desorption capability and stabilized water content in the sorbent, this interfacial solar-driven atmospheric water generator enables a high rate of water production (≈0.5 L m-2 h-1 ) and 2.8 L m-2 d-1 for the outdoor environment. It is expected that this interfacial solar-driven atmospheric water generator, based on the liquid sorbent with a simultaneous adsorption-desorption process opens up a promising pathway to effectively harvest water from air.

A water lily-inspired hierarchical design for stable and efficient solar evaporation of high-salinity brine.

In recent years, interfacial solar vapor generation has shown great potential in realizing desalination and wastewater treatment with high energy conversion efficiency. However, high evaporation rate cannot be maintained because of the seemingly unavoidable fouling or salt accumulation on the solar absorbers. The degradation accelerates as the solute concentration increases. Here, we demonstrate a water lily-inspired hierarchical structure that enables efficient evaporation (~80% solar-to-vapor efficiency) out of high-salinity brine [10 weight % (wt %)] and wastewater containing heavy metal ions (30 wt %). More notably, neither decrease in evaporation rate nor fouling on absorbers was observed during the entire evaporation process until water and solute were completely separated. With the capabilities of stable and high-rate evaporation out of high-salinity brine and the effective separation of solute from water, it is expected that this technology can have direct implications in various fields such as wastewater treatment, sea-salt production, and metal recycling.

An Interfacial Solar Heating Assisted Liquid Sorbent Atmospheric Water Generator.

Harvesting water from air is a promising strategy for fresh-water production, and it is particularly desirable for areas that lack direct access to clean water. While high-concentration liquid sorbent is well-known for high sorption, it has not been widely used for atmospheric water collection, being primarily limited by the difficulty in desorption. Interfacial solar heating based on a salt-resistant GO-based aerogel is now shown to enable a high-concentration liquid sorbent (CaCl2 50 wt % solution) based atmospheric water generator. Fresh water (2.89 kg m-2 day-1 ) can be produced at about 70 % relative humidity, with only solar energy input and energy efficiency of desorption as high as 66.9 %. This low-cost and effective approach provides an attractive pathway to extract water from air, to relieve the thirst of arid, land-locked, and other areas where fresh water is scarce.

The revival of thermal utilization from the Sun: interfacial solar vapor generation.

Since solar energy is the ultimate energy resource and a significant amount of global energy utilization goes through heat, there have been persistent efforts for centuries to develop devices and systems for solar-thermal conversion. Most recently, interfacial solar vapor generation, as an emerging concept of solar-thermal conversion, has gained significant attention for its great potentials in various fields such as desalination, sterilization, catalysis, etc. With the advances of rationally designed materials and structures and photon and thermal management at the nanoscale, interfacial solar vapor generation has demonstrated both thermodynamic and kinetical advantages over conventional strategies. In this review, we aim to illustrate the definition, mechanism and figures of merit of interfacial solar vapor generation, and to summarize the development progress of relevant materials and applications, as well as to provide a prospective view of the future.

Interfacial Solar Steam Generation Enables Fast-Responsive, Energy-Efficient, and Low-Cost Off-Grid Sterilization.

Steam sterilization is widely used as one of the most reliable sterilization methods for public health. However, traditional steam sterilization mainly relies on electricity, a constrained resource for many developing countries and areas. The lack of available and affordable sterilization techniques in these areas is exposing human beings to a high risk of various epidemic diseases, and calls for the development of off-grid sterilization solutions. For the first time, the kinetic advantages of interfacial solar steam generation is fundamentally revealed and it is demonstrated that interfacial solar steam generation can enable fast-responsive (as short as 8.4 min for a full sterilization cycle) and energy-efficient (100 J mL-1 for steam reaching 121 °C) sterilization, superior to those of the conventional sterilization techniques. The key solar absorber is made of low cost and widely available biochar. A proof-of-concept sterilization system with a 10.5 L solar autoclave is built with very low cost of whole life-cycle and operates with minimum carbon footprint. Effective sterilization (≈99.999999% inactivation of pathogen), exceeding the requirements of Food and Drug Administration is demonstrated, making the sterilization strategy a promising and complementary personalized sterilization solution, particularly beneficial for off-grid areas.

Tuning Transpiration by Interfacial Solar Absorber-Leaf Engineering.

Plant transpiration, a process of water movement through a plant and its evaporation from aerial parts especially leaves, consumes a large component of the total continental precipitation (≈48%) and significantly influences global water distribution and climate. To date, various chemical and/or biological explorations have been made to tune the transpiration but with uncertain environmental risks. In recent years, interfacial solar steam/vapor generation is attracting a lot of attention for achieving high energy transfer efficiency. Various optical and thermal designs at the solar absorber-water interface for potential applications in water purification, seawater desalination, and power generation appear. In this work, the concept of interfacial solar vapor generation is extended to tunable plant transpiration by showing for the first time that the transpiration efficiency can also be enhanced or suppressed through engineering the solar absorber-leaf interface. By tuning the solar absorption of membrane in direct touch with green leaf, surface temperature of green leaf will change accordingly because of photothermal effect, thus the transpiration efficiency as well as temperature and relative humidity in the surrounding environment will be tuned. This tunable transpiration by interfacial absorber-leaf engineering can open an alternative avenue to regulate local atmospheric temperature, humidity, and eventually hydrologic cycle.