Direct detection of virus-like particles using color images of plasmonic nanostructures.

We propose a measurement method for sensitive and label-free detections of virus-like particles (VLPs) using color images of nanoplasmonic sensing chips. The nanoplasmonic chip consists of 5×5 gold nanoslit arrays and the gold surface is modified with specific antibodies for spike protein. The resonant wavelength of the 430-nm-period gold nanoslit arrays underwater environment is about 570 nm which falls between the green and red bands of the color CCD. The captured VLPs by the specific antibodies shift the plasmonic resonance of the gold nanoslits. It results in an increased brightness of green pixels and decreased brightness of red pixels. The image contrast signals of (green - red) / (red + green) show good linearity with the surface particle density. The experimental tests show the image contrast method can detect 100-nm polystyrene particles with a surface density smaller than 2 particles/µm2. We demonstrate the application for direct detection of SARS-CoV-2 VLPs using a simple scanner platform. A detection limit smaller than 1 pg/mL with a detection time less than 30 minutes can be achieved.

Effects of electron transport layer thickness on light extraction in corrugated OLEDs.

This study reported the effects of electron transport layer (ETL) thickness on light extraction in corrugated organic light-emitting diodes (OLEDs) and each layer in OLEDs exhibited a periodical corrugated structure, which was determined by depositing thin films on a glass substrate with a nanoimprinted blazed grating structure. The insight is that light extraction in corrugated OLEDs significantly depends on the ETL thickness. Varying the ETL thickness changed the distribution of carrier recombination and led to exciton formation and optical interference, thereby resulting in different attribution of optical loss modes in OLEDs, which increased or even decreased light extraction and device efficiency. Trapped light extraction from the surface plasmon polariton (SPP) and waveguide (WG) modes was identified by splitting the light into transverse electric and transverse magnetic emissions. Thus, the contributions from the individual SPP and WG modes to the external quantum efficiency (EQE) were distinctly clarified by comparing the experimental results with the theoretical calculations. At the ETL thickness of 115 nm, the corrugated OLED exhibited a significantly enhanced (1.83-fold) EQE compared to the planar one due to the effective extraction of trapped light from the SPP and WG modes. The EQE was enhanced by 0.5%, wherein 0.39% came from the WG mode and 0.11% came from the SPP mode.

Trajectory mapping of the early Drosophila germline reveals controls of zygotic activation and sex differentiation.

Germ cells in Drosophila melanogaster are specified maternally shortly after fertilization and are transcriptionally quiescent until their zygotic genome is activated to sustain further development. To understand the molecular basis of this process, we analyzed the progressing transcriptomes of early male and female germ cells at the single-cell level between germline specification and coalescence with somatic gonadal cells. Our data comprehensively cover zygotic activation in the germline genome, and analyses on genes that exhibit germline-restricted expression reveal that polymerase pausing and differential RNA stability are important mechanisms that establish gene expression differences between the germline and soma. In addition, we observe an immediate bifurcation between the male and female germ cells as zygotic transcription begins. The main difference between the two sexes is an elevation in X Chromosome expression in females relative to males, signifying incomplete dosage compensation, with a few select genes exhibiting even higher expression increases. These indicate that the male program is the default mode in the germline that is driven to female development with a second X Chromosome.

Polymer LEDs with improved efficacy via periodic nanostructure-based aluminum.

Periodic aluminum-capped nanoslit arrays were produced on a polycarbonate plastic substrate by rapid hot embossing nanoimprint lithography and thermal evaporation, and they were used as a transparent window for blue-emitting polymer light-emitting diodes (PLEDs). The external quantum efficiency of blue-emitting PLEDs was enhanced by the surface plasmon polaritons of the periodic aluminum-capped nanoslit arrays. A maximum current efficiency of 4.84 cd/A was achieved for the proposed PLED, which was over 2.2 times that of the reference PLED (2.18 cd/A). These results demonstrate that periodic nanostructure can assist in the simple and low-cost fabrication of high-performance polymer optoelectronic devices.

Galectin-1 Restricts Vascular Smooth Muscle Cell Motility Via Modulating Adhesion Force and Focal Adhesion Dynamics.

Vascular smooth muscle cell (VSMC) migration play a key role in the development of intimal hyperplasia and atherosclerosis. Galectin-1 (Gal-1) is a redox-sensitive ß-galactoside-binding lectin expressed in VSMCs with intracellular and extracellular localizations. Here we show that VSMCs deficient in Gal-1 (Gal-1-KO) exhibited greater motility than wild type (WT) cells. Likewise, Gal-1-KO-VSMC migration was inhibited by a redox-insensitive but activity-preserved Gal-1 (CSGal-1) in a glycan-dependent manner. Gal-1-KO-VSMCs adhered slower than WT cells on fibronectin. Cell spreading and focal adhesion (FA) formation examined by phalloidin and vinculin staining were less in Gal-1-KO-VSMCs. Concomitantly, FA kinase (FAK) phosphorylation was induced to a lower extent in Gal-1-KO cells. Analysis of FA dynamics by nocodazole washout assay demonstrated that FA disassembly, correlated with FAK de-phosphorylation, was faster in Gal-1-KO-VSMCs. Surface plasmon resonance assay demonstrated that CSGal-1 interacted with α5ß1integrin and fibronectin in a glycan-dependent manner. Chemical crosslinking experiment and atomic force microscopy further revealed the involvement of extracellular Gal-1 in strengthening VSMC-fibronectin interaction. In vivo experiment showed that carotid ligation-induced neointimal hyperplasia was more severe in Gal-1-KO mice than WT counterparts. Collectively, these data disclose that Gal-1 restricts VSMC migration by modulating cell-matrix interaction and focal adhesion turnover, which limits neointimal formation post vascular injury.

Efficacy improvement in polymer LEDs via silver-nanoparticle doping in the emissive layer.

The coupling of surface plasmons and excitons in the emissive layer (EML) can improve the performance of polymer light-emitting diodes (PLEDs). Silver nanoparticles (Ag-NPs) with a decahedron structure are prepared by the chemical reduction and photochemical methods and doped directly into the EML after the phase-transfer process. The surface plasmon resonance effect of Ag-NPs, which makes full use of quenched excitons and increases the efficiency of excitons in the EML in a PLED, enhances the current efficacy by a factor of 75 relative to that of the undoped reference device (from 0.22 to 16.64 cd/A). These results demonstrate that Ag-NPs can assist in simple and low-cost fabrication of high-performance polymer optoelectronic devices.

Adenocarcinoma Ex Goblet Cell Carcinoid of Appendix: Two Case Reports.

Adenocarcinoma ex goblet cell carcinoid is a rare tumor incidentally found in specimens of appendicitis. Most patients present with acute abdomen, similar to acute appendicitis. Here we present two cases, which were found incidentally after operation. We give a brief summary about clinical and biological behavior of this entity.

Enhanced luminescence efficiency of Ag nanoparticles dispersed on indium tin oxide for polymer light-emitting diodes.

This study presents a substantial enhancement in electroluminescence achieved by depositing Ag nanoparticles on an ITO-coated glass substrate (Ag/ITO) for approximately 10-s to form novel window materials for use in polymer light-emitting diodes (PLEDs). The PLEDs discussed herein are single-layer devices based on a poly[9,9-dioctylfluorene-co-benzothiadiazole] (F8BT) emissive layer. In addition to its low cost, this novel fabrication method can effectively increase the charge transport properties of the active layer to meet the high performance requirements of PLEDs. Due to the increased conductivity and work function of the Ag/ITO substrate, the electroluminescence intensity was increased by nearly 3.3-fold compared with that of the same PLED with a bare ITO substrate.