Image analysis and teaching strategy optimization of folk dance training based on the deep neural network.

To improve the recognition effect of the folk dance image recognition model and put forward new suggestions for teachers' teaching strategies, this study introduces a Deep Neural Network (DNN) to optimize the folk dance training image recognition model. Moreover, a corresponding teaching strategy optimization scheme is proposed according to the experimental results. Firstly, the image preprocessing and feature extraction of DNN are optimized. Secondly, classification and target detection models are established to analyze the folk dance training images, and the C-dance dataset is used for experiments. Finally, the results are compared with those of the Naive Bayes classifier, K-nearest neighbor, decision tree classifier, support vector machine, and logistic regression models. The results of this study provide new suggestions for teaching strategies. The research results indicate that the optimized classification model shows a significant improvement in classification accuracy across various aspects such as action complexity, dance types, movement speed, dance styles, body dynamics, and rhythm. The accuracy, precision, recall, and F1 scores have increased by approximately 14.7, 11.8, 13.2, and 17.4%, respectively. In the study of factors such as different training images, changes in perspective, lighting conditions, and noise interference, the optimized model demonstrates a substantial enhancement in recognition accuracy and robustness. These findings suggest that, compared to traditional models, the optimized model performs better in identifying various dances and movements, enhancing the accuracy and stability of classification. Based on the experimental results, strategies for optimizing the real-time feedback and assessment mechanism in folk dance teaching, as well as the design of personalized learning paths, are proposed. Therefore, this study holds the potential to be applied in the field of folk dance, promoting the development and innovation of folk dance education.

Revealing molecular and cellular heterogeneity in hypopharyngeal carcinogenesis through single-cell RNA and TCR/BCR sequencing.

Introduction: Hypopharyngeal squamous cell carcinoma (HSCC) is one of the malignant tumors with the worst prognosis in head and neck cancers. The transformation from normal tissue through low-grade and high-grade intraepithelial neoplasia to cancerous tissue in HSCC is typically viewed as a progressive pathological sequence typical of tumorigenesis. Nonetheless, the alterations in diverse cell clusters within the tissue microenvironment (TME) throughout tumorigenesis and their impact on the development of HSCC are yet to be fully understood. Methods: We employed single-cell RNA sequencing and TCR/BCR sequencing to sequence 60,854 cells from nine tissue samples representing different stages during the progression of HSCC. This allowed us to construct dynamic transcriptomic maps of cells in diverse TME across various disease stages, and experimentally validated the key molecules within it. Results: We delineated the heterogeneity among tumor cells, immune cells (including T cells, B cells, and myeloid cells), and stromal cells (such as fibroblasts and endothelial cells) during the tumorigenesis of HSCC. We uncovered the alterations in function and state of distinct cell clusters at different stages of tumor development and identified specific clusters closely associated with the tumorigenesis of HSCC. Consequently, we discovered molecules like MAGEA3 and MMP3, pivotal for the diagnosis and treatment of HSCC. Discussion: Our research sheds light on the dynamic alterations within the TME during the tumorigenesis of HSCC, which will help to understand its mechanism of canceration, identify early diagnostic markers, and discover new therapeutic targets.

Anti-inflammatory discovery of sesquiterpenoids and a jasmonic acid derivative from Artemisia stolonifera.

Eleven previously undescribed sesquiterpenoids (8-18), one undescribed jasmonic acid derivative (35) and 28 known compounds were isolated from the leaves of Artemisia stolonifera. Undescribed compounds with their absolute configurations were determined by extensive spectroscopic analysis, single-crystal X-ray diffraction and ECD calculation. Compound 8 was identified as a rare sesquiterpenoid featuring a rearranged 5/8 bicyclic ring system, whereas compound 17 was found to be an unprecedented monocyclic sesquiterpenoid with methyl rearrangement. Evaluation of biological activity showed that compounds 1-5 and 7 displayed cytotoxicity against six tumor cells. In the meantime, compounds 11, 12, 18 and 35 exhibited inhibitory effects against LPS-stimulated NO production in RAW 264.7 macrophage cells and reduced the transcription of IL-6 and IL-1ß in a dose-dependent manner at 25, 50 and 100 µM. Moreover, the anti-inflammatory-based network pharmacology and molecular docking analyses revealed potential target proteins of 11, 12, 18 and 35.

MXene/ZnS/chitosan-cellulose composite with Schottky heterostructure for efficient removal of anionic dyes by synergistic effect of adsorption and photocatalytic degradation.

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O2-, h+, and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye.

Causal associations between gut microbiota and cutaneous melanoma: a Mendelian randomization study.

Background: Cutaneous melanoma (CM) of the skin stands as the leading cause of mortality among skin cancer-related deaths. Despite the successes achieved with novel therapies such as immunotherapy and targeted therapy, their efficacy remains limited, necessitating further exploration of new treatment modalities. The gut microbiota and CM may be linked, as indicated by a growing body of preclinical and observational research. Nevertheless, the exact correlation between the intestinal microbiota and CM remains to be determined. Therefore, this study aims to assess the potential causal relationship between the gut microbiota and CM. Methods: The study utilized exposure data obtained from the MiBioGen consortium's microbiome GWAS, which included a total of 18,340 samples gathered from 24 population-based cohorts. Data at the summary level for CM were acquired from the UK Biobank investigation. The main analytical strategy utilized in this research was the inverse variance weighted (IVW) technique, supported by quality assurance measures like the weighted median model, MR-Egger, simple model, and weighted model approaches. The Cochran's Q test was used to evaluate heterogeneity. To ascertain potential pleiotropy, we employed both the MR-Egger regression and the MR-PRESSO test. Sensitivity analysis was conducted using the leave-one-out method. Results: The study found that the class Bacteroidia (OR = 0.997, 95% CI: 0.995-0.999, p = 0.027), genus Parabacteroides (OR = 0.997, 95% CI: 0.994-0.999, p = 0.037), order Bacteroidales (OR = 0.997, 95% CI: 0.995-0.999, p = 0.027), and genus Veillonella (OR = 0.998, 95% CI: 0.996-0.999, p = 0.046) have protective effects on CM. On the order hand, the genus Blautia (OR = 1.003, 95% CI: 1-1.006, p = 0.001) and phylum Cyanobacteria (OR = 1.002, 95% CI: 1-1.004, p = 0.04) are identified as risk factors for CM. Conclusion: We comprehensively assessed the potential causal relationship between the gut microbiota and CM and identified associations between six gut microbiota and CM. Among these, four gut microbiota were identified as protective factors for CM, while two gut microbiota were identified as risk factors for CM. This study effectively established a causal relationship between the gut microbiota and CM, thereby providing valuable insights into the mechanistic pathways through which the microbiota impacts the progression of CM.

The Inhibition of Fibrosis and Inflammation in Obstructive Kidney Injury via the miR-122-5p/SOX2 Axis Using USC-Exos.

Background: Fibrosis and inflammation due to ureteropelvic junction obstruction substantially contributes to poor renal function. Urine-derived stem-cell-derived exosomes (USC-Exos) have therapeutic effects through paracrine. Methods: In vitro, the effects of USC-Exos on the biological functions of HK-2 and human umbilical vein endothelial cells were tested. Cell inflammation and fibrosis were induced by transforming growth factor-ß1 and interleukin-1ß, and their anti-inflammatory and antifibrotic effects were observed after exogenous addition of USC-Exos. Through high-throughput sequencing of microRNA in USC-Exos, the pathways and key microRNAs were selected. Then, the antifibrotic and anti-inflammatory effects of exosomal miR-122-5p and target genes were verified. The role of the miR-122-5p/SOX2 axis in anti-inflammatory and antifibrotic effects was verified. In vivo, a rabbit model of partial unilateral ureteral obstruction (PUUO) was established. Magnetic resonance imaging recorded the volume of the renal pelvis after modeling, and renal tissue was pathologically analyzed. Results: We examined the role of USC-Exos and their miR-122-5p content in obstructive kidney injury. These Exos exhibit antifibrotic and anti-inflammatory activities. SOX2 is the hub gene in PUUO and negatively related to renal function. We confirmed the binding relationship between miR-122-5p and SOX2. The anti-inflammatory and antifibrotic effects of miR-122-5p were inhibited, indicating that miR-122-5p has anti-inflammatory and antifibrotic effects by inhibiting SOX2 expression. In vivo, the PUUO group showed typical obstructive kidney injury after modeling. After USC-Exo treatment, the shape of the renal pelvis shown a remarkable improvement, and inflammation and fibrosis decreased. Conclusions: We confirmed that miR-122-5p from USC-Exos targeting SOX2 is a new molecular target for postoperative recovery treatment of obstructive kidney injury.

Polyaniline Induced Trivalent Ni in Laser-Fabricated Nickel Oxides for Efficient Oxygen Evolution Reaction.

Although it is generally acknowledged that transition metals at high oxidation states represent superior oxygen evolution reaction (OER) activity, the preparation and stability of such a high-valence state are still a challenge, which requires relatively harsh reaction conditions and is unstable under ambient conditions. Herein, we report the formation of trivalent nickel (Ni3+) in laser-fabricated nickel oxides induced by polyaniline (PANI) under electrochemical activation via a significant charge transfer between Ni and N, as confirmed by X-ray photoelectron spectroscopy and density functional theory calculations. Thereafter, the presence of Ni3+ and the improved conductivity by PANI effectively increase the electrochemical OER activity of the samples together with excellent long-term stability. This work provides new insights for the rational manufacture of high-valence metal for electrochemical reactions.

Piezocatalytically-induced controllable mineralization scaffold with bone-like microenvironment to achieve endogenous bone regeneration.

Orderly hierarchical structure with balanced mechanical, chemical, and electrical properties is the basis of the natural bone microenvironment. Inspired by nature, we developed a piezocatalytically-induced controlled mineralization strategy using piezoelectric polymer poly-L-lactic acid (PLLA) fibers with ordered micro-nano structures to prepare biomimetic tissue engineering scaffolds with a bone-like microenvironment (pcm-PLLA), in which PLLA-mediated piezoelectric catalysis promoted the in-situ polymerization of dopamine and subsequently regulated the controllable growth of hydroxyapatite crystals on the fiber surface. PLLA fibers, as analogs of mineralized collagen fibers, were arranged in an oriented manner, and ultimately formed a bone-like interconnected pore structure; in addition, they also provided bone-like piezoelectric properties. The uniformly sized HA nanocrystals formed by controlled mineralization provided a bone-like mechanical strength and chemical environment. The pcm-PLLA scaffold could rapidly recruit endogenous stem cells, and promote their osteogenic differentiation by activating cell membrane calcium channels and PI3K signaling pathways through ultrasound-responsive piezoelectric signals. In addition, the scaffold also provided a suitable microenvironment to promote macrophage M2 polarization and angiogenesis, thereby enhancing bone regeneration in skull defects of rats. The proposed piezocatalytically-induced controllable mineralization strategy provides a new idea for the development of tissue engineering scaffolds that can be implemented for multimodal physical stimulation therapy.

Adjustment methods of Schottky barrier height in one- and two-dimensional semiconductor devices.

The Schottky contact which is a crucial interface between semiconductors and metals is becoming increasingly significant in nano-semiconductor devices. A Schottky barrier, also known as the energy barrier, controls the depletion width and carrier transport across the metal-semiconductor interface. Controlling or adjusting Schottky barrier height (SBH) has always been a vital issue in the successful operation of any semiconductor device. This review provides a comprehensive overview of the static and dynamic adjustment methods of SBH, with a particular focus on the recent advancements in nano-semiconductor devices. These methods encompass the work function of the metals, interface gap states, surface modification, image-lowering effect, external electric field, light illumination, and piezotronic effect. We also discuss strategies to overcome the Fermi-level pinning effect caused by interface gap states, including van der Waals contact and 1D edge metal contact. Finally, this review concludes with future perspectives in this field.

Multi-omics approaches to understand pathogenicity during potato early blight disease caused by Alternaria solani.

Potato early blight (PEB), a foliar disease of potato during the growing period, caused by Alternaria sp., is common in major potato-producing areas worldwide. Effective agents to control this disease or completely resistant potato varieties are absent. Large-scale use of fungicides is limited due to possibility of increase in pathogen resistance and the requirements of ecological agriculture. In this study, we focused on the composition and infection characteristics of early blight pathogens in Yunnan Province and screened candidate pathogenesis-related pathways and genes. We isolated 85 strains of Alternaria sp. fungi from typical early blight spots in three potato-growing regions in Yunnan Province from 2018 to 2022, and identified 35 strains of Alternaria solani and 50 strains of Alternaria alternata by morphological characterization and ITS sequence comparison, which were identified as the main and conditional pathogens causing early blight in potato, respectively. Scanning electron microscope analysis confirmed only A. solani producing appressorium at 4 h after inoculation successfully infected the leaf cells. Via genome assembly and annotation, combine transcriptome and proteomic analysis, the following pathogenicity-related unit, transcription factors and metabolic pathway were identified: (1) cell wall-degrading enzymes, such as pectinase, keratinase, and cellulase; (2) genes and pathways related to conidia germination and pathogenicity, such as ubiquitination and peroxisomes; and (3) transcription factors, such as Zn-clus, C2H2, bZIP, and bHLH. These elements were responsible for PEB epidemic in Yunnan.

The persistent inflammation in COPD: is autoimmunity the core mechanism?

COPD poses a significant global public health challenge, primarily characterised by irreversible airflow restriction and persistent respiratory symptoms. The hallmark pathology of COPD includes sustained airway inflammation and the eventual destruction of lung tissue structure. While multiple risk factors are implicated in the disease's progression, the underlying mechanisms remain largely elusive. The perpetuation of inflammation is pivotal to the advancement of COPD, emphasising the importance of investigating these self-sustaining mechanisms for a deeper understanding of the pathogenesis. Autoimmune responses constitute a critical mechanism in maintaining inflammation, with burgeoning evidence pointing to their central role in COPD progression; yet, the intricacies of these mechanisms remain inadequately defined. This review elaborates on the evidence supporting the presence of autoimmune processes in COPD and examines the potential mechanisms through which autoimmune responses may drive the chronic inflammation characteristic of the disease. Moreover, we attempt to interpret the clinical manifestations of COPD through autoimmunity.

The study of loading mode with in-vitro fatigue testing for mitral annuloplasty ring.

To maintain the physiological dynamics of the mitral annulus, mitral annuloplasty rings (MAR) must be flexible. Enhanced flexibility implies decreased resistance to fatigue and potential for fatigue fracture. This study established new methods to test the flexible fatigue life of MAR in-vitro using numerical analysis; the purpose is that the fatigue test could reflect the real stress distribution in-vivo. Based on the conventional test methods (C1, D1), this paper presents a novel test method (C2, D2). Four testing methods for open-end annuloplasty rings (C1, C2) and closed-end annuloplasty rings (D1, D2) were modelled and their stress distribution calculated by finite element analysis. The mean absolute error (Χ) and the Pearson correlation coefficient (Φ) were used to quantify the difference in stress distribution between the loading modes in-vivo and in-vitro. For closed-end annuloplasty rings, the novel test method (D2) is not obvious better than conventional test methods(D1) in duplicating the stress distribution (ΦD1 = 0.88 vs ΦD2 = 0.92). However, the maximum values of stress in the novel test method are closer to the maximum value of stress under in-vivo loading (ΧD1 = 5.2Mpa vs ΧD2 = 4.4Mpa). For open-end annuloplasty rings, the novel test method(C2) is obviously superior to the conventional test method(C1) in duplicating both the stress distribution and the stress peak values of the in-vivo loading (ΦC1 = 0.22 vs ΦC2 = 0.98; ΧC1 = 59.1Mpa vs ΧC2 = 11.0Mpa). The in-vitro loading methods described in this article more closely approximated in-vivo conditions compared to traditional methods. They are simpler to operate, more efficient and can help manufacturers expedite new product development, assist regulatory agencies with product quality oversight.

Differential drought tolerance among dichondra (Dichondra repens) genotypes in relation to alterations in chlorophyll metabolism, osmotic adjustment, and accumulation of organic metabolites.

Dichondra (Dichondra repens) is an important ground cover plant for landscaping and establishment of green space, but adaptive mechanism of drought tolerance is not well understood in this species. This study was conducted to compare differential response to drought stress among three genotypes (Dr5, Duliujiang, and Dr29) based on integrated physiological, ultrastructural, and metabolic assays. Results showed that drought significantly inhibited photosynthesis, accelerated lipids peroxidation, and also disrupted water balance and cellular metabolism in dichondra plants. Dr5 showed better photochemical efficiency of photosystem II and water homeostasis, less oxidative damage, and more stable chlorophyll metabolism than Duliujinag or Dr29 in response to drought stress. In addition, Dr5 accumulated more amino acids, organic acids, and other metabolites, which was good for maintaining better antioxidant capacity, osmotic homeostasis, and energy metabolism under drought stress. Drought tolerance of Duliujiang was lower than Dr5, but better than Dr29, which could be positively correlated with accumulations of sucrose, maltitol, aconitic acid, isocitric acid, and shikimic acid due to critical roles of these metabolites in osmotic adjustment and metabolic homeostasis. Current findings provide insights into understanding of underlying mechanism of metabolic regulation in dichondra species. Dr5 could be used as an important drought-tolerant resource for cultivation and water-saving breeding.

High Signal to Noise Ratio Piezoelectric Thin Film Sensor Based on Elastomer Amplification for Ambulatory Blood Pressure Monitoring.

Continuous pulse wave detection can be used for monitoring and diagnosing cardiovascular diseases, and research on pulse sensing based on piezoelectric thin films is one of the hot spots. Usually, piezoelectric thin films do not come into direct contact with the skin and need to be connected through a layer of an elastic medium. Most views think that the main function of this layer of elastic medium is to increase the adhesion between the sensor component and the skin, but there is little discussion about the impact of the elastic medium on pulse vibration transmission. Here, we conducted a detailed study on the effects of Young's modulus and the thickness of elastic media on pulse sensing signals. The results show that the waveform amplitude of the piezoelectric sensing signal decreases with the increase of Young's modulus and thickness of the elastic medium. Then, we constructed a theoretical model of the influence of elastic media on pulse wave propagation. The amplitude of the pulse wave signal detected by the optimized sensor was increased to 480%. Our research shows that by regulating Young's modulus and thickness of elastic media, pulse wave signals can undergo a similar amplification effect, which has an important theoretical reference value for achieving ambulatory blood pressure monitoring based on high-quality pulse waves.

Progress in the Treatment of Central Nervous System Diseases Based on Nanosized Traditional Chinese Medicine.

Traditional Chinese Medicine (TCM) is widely used in clinical practice to treat diseases related to central nervous system (CNS) damage. However, the blood-brain barrier (BBB) constitutes a significant impediment to the effective delivery of TCM, thus substantially diminishing its efficacy. Advances in nanotechnology and its applications in TCM (also known as nano-TCM) can deliver active ingredients or components of TCM across the BBB to the targeted brain region. This review provides an overview of the physiological and pathological mechanisms of the BBB and systematically classifies the common TCM used to treat CNS diseases and types of nanocarriers that effectively deliver TCM to the brain. Additionally, drug delivery strategies for nano-TCMs that utilize in vivo physiological properties or in vitro devices to bypass or cross the BBB are discussed. This review further focuses on the application of nano-TCMs in the treatment of various CNS diseases. Finally, this article anticipates a design strategy for nano-TCMs with higher delivery efficiency and probes their application potential in treating a wider range of CNS diseases.

Strategies to Improve the Output Performance of Triboelectric Nanogenerators.

Triboelectric nanogenerators (TENGs) can collect and convert random mechanical energy into electric energy, with remarkable advantages including broadly available materials, straightforward preparation, and multiple applications. Over the years, researchers have made substantial advancements in the theoretical and practical aspects of TENG. Nevertheless, the pivotal challenge in realizing full applications of TENG lies in ensuring that the generated output meets the specific application requirements. Consequently, substantial research is dedicated to exploring methods and mechanisms for enhancing the output performance of TENG devices. This review aims to comprehensively examine the influencing factors and corresponding improvement strategies of the output performance based on the contact electrification mechanism and operational principles that underlie TENG technology. This review primarily delves into five key areas of improvement: materials selection, surface modification, component adjustments, structural optimization, and electrode enhancements. These aspects are crucial in tailoring TENG devices to meet the desired performance metrics for various applications.

Spermidine or spermine pretreatment regulates organic metabolites and ions homeostasis in favor of white clover seed germination against salt toxicity.

White clover is widely cultivated as a leguminous forage or ground cover plant worldwide. However, soil salinization decreases its yield and quality. Aims of the present experiment were to elucidate the impact of seed pretreatment with spermidine (Spd) or spermine (Spm) on amylolysis, Na+/K+ accumulation, and metabolic homeostasis during germination. Seed was soaked in distilled water (control), Spd or Spm solution and then germinated under optimal or salt stress conditions for 7 days. Results showed that germination vigor, germination percentage, or seed vigour index of seeds pretreatment with Spd increased by 7%, 11%, or 70% when compared with water-pretreated seeds under salt stress, respectively. Germination percentage or seed vigour index of seeds pretreatment with Spm increased by 17% or 78% than water-pretreated seeds under saline condition, respectively. In response to salt stress, accelerated amylolysis via activation of ß-amylase activity was induced by Spd or Spm pretreatment. Spd or Spm pretreatment also significantly enhanced accumulation of diverse amino acids, organic acids, sugars, and other metabolites (putrescine, myo-inositol, sorbitol, daidzein etc.) associated with enhanced osmotic adjustment, antioxidant capacity, and energy supply during germination under salt stress. In addition, Spd or Spm pretreatment not only significantly reduced salt-induced K+ loss and overaccumulation of Na+, but also improved the ratio of K+ to Na+, contributing to Na+ and K+ balance in seedlings. In response to salt stress, seeds pretreatment with Spd or Spm up-regulated transcription level of NHX2 related to enhancement in compartmentation of Na+ from cytoplasm to vacuole, thus reducing Na+ toxicity in cytoplasm. Spm priming also uniquely up-regulated transcription levels of SKOR, HKT1, and HAL2 associated with K+ and Na + homeostasis and decline in cytotoxicity under salt stress.

A self-powered intracardiac pacemaker in swine model.

Harvesting biomechanical energy from cardiac motion is an attractive power source for implantable bioelectronic devices. Here, we report a battery-free, transcatheter, self-powered intracardiac pacemaker based on the coupled effect of triboelectrification and electrostatic induction for the treatment of arrhythmia in large animal models. We show that the capsule-shaped device (1.75 g, 1.52 cc) can be integrated with a delivery catheter for implanting in the right ventricle of a swine through the intravenous route, which effectively converts cardiac motion energy to electricity and maintains endocardial pacing function during the three-week follow-up period. We measure in vivo open circuit voltage and short circuit current of the self-powered intracardiac pacemaker of about 6.0 V and 0.2 µA, respectively. This approach exhibits up-to-date progress in self-powered medical devices and it may overcome the inherent energy shortcomings of implantable pacemakers and other bioelectronic devices for therapy and sensing.

The Plastic Deformation Mechanism in Nano-Polycrystalline Al/Mg Layered Composites: A Molecular Dynamics Study.

Understanding plastic deformation behaviour is key to optimising the mechanical properties of nano-polycrystalline layered composites. This study employs the molecular dynamics (MD) simulation to comprehensively investigate the effects of various factors, such as grain sizes, strain rates, and the interlayer thicknesses of the intermetallic compounds (IMCs), on the plastic deformation behaviour of nano-polycrystalline Al/Mg layered composites. Our findings reveal that the influence of grain size on deformation behaviour is governed by the strain rate, and an increase in grain size is inversely proportional to yield stress at low strain rates, whereas it is positively proportional to tensile stress at high strain rates. Moreover, an optimal thickness of the intermediate layer contributes to enhanced composite strength, whereas an excessive thickness leads to reduced tensile strength due to the fewer grain boundaries (GBs) available for accommodating dislocations. The reinforcing impact of the intermediate IMCs layer diminishes at excessive strain rates, as the grains struggle to accommodate substantial large strains within a limited timeframe encountered at high strain rates. The insights into grain sizes, strain rates, and interlayer thicknesses obtained from this study enable the tailored development of nanocomposites with optimal mechanical characteristics.