RESUMO
BACKGROUND: Distal humerus fractures are a challenge to treat, and the current standard of care, open reduction internal fixation with a double-plate, has a high rate of complications. We proposed a novel internal fixation configuration, lateral intramedullary nail and medial plate (LINMP) and verified its rigidity through biomechanical tests and finite element analysis. METHODS: The study involved biomechanical testing of 30 synthetic humerus models to compare 2 different fixation systems for an AO 13C-2.3 type fracture. The orthogonal double-plate (ODP) group and the LINMP group were compared through biomechanical testing to measure stiffness and failure load fewer than 3 working conditions. Based on the results, we optimized the intramedullary nail by eliminating the holes at the distal end of the nail and incorporating a 2-hole external locking plate. The Finite element analysis was also conducted to further compare the modified LINMP configuration with the previous 2 fixation configurations. RESULTS: In biomechanical tests, the ODP group exhibited lower stiffness under bending and compression forces compared to the LINMP group, but higher stiffness and failure loads under torsion force. In finite element analysis, the modified LINMP reduces the maximum stress of the fixation structure without significantly reducing the stiffness under bending stress and axial compression conditions. In torsion stress conditions, the modified LINMP enhances both the maximum stress and the stiffness, although it remains marginally inferior to the ODP structure. CONCLUSION: Our study demonstrates that the innovative LINMP presents comparable or slightly superior concerning bending and axial loading compared to orthogonal double-plate osteosynthesis for distal humeral intra-articular fractures, which might become a minimally invasive option for these fractures.
