The antibacterial mechanism of (-)-epigallocatechin-3-gallate (EGCG) against Campylobacter jejuni through transcriptome profiling.

(-)-Epigallocatechin-3-gallate (EGCG) has been shown antibacterial activity against Campylobacter jejuni; however, the relevant antibacterial mechanism is unknown. In this study, phenotypic experiments and RNA sequencing were used to explore the antibacterial mechanism. The minimum inhibitory concentration of EGCG on C. jejuni was 32 µg/mL. EGCG-treated was able to increase intracellular reactive oxygen species levels and decline bacterial motility. The morphology and cell membrane of C. jejuni after EGCG treatment were observed collapsed, broken, and agglomerated by field emission scanning electron microscopy and fluorescent microscopy. The RNA-seq analysis presents that there are 36 and 72 differential expressed genes after C. jejuni was treated by EGCG with the concentration of 16 and 32 µg/mL, respectively. EGCG-treated increased the thioredoxin expression, which was a critical protein to resist oxidative stress. Moreover, downregulation of the flgH and flgM gene in flagellin biosynthesis of C. jejuni was able to impair the flagella, reducing cell motility and virulence. The primary antibacterial mechanism revealed by RNA-seq is that EGCG with iron-chelating activity competes with C. jejuni for iron, causing iron deficiency in C. jejuni, which potentially impacts the survival and virulence of C. jejuni. The results suggested a new direction for exploring the activity of EGCG against C. jejuni in the food industry. PRACTICAL APPLICATION: A deeper understanding of the antibacterial mechanism of EGCG against C. jejuni was more beneficial in improving the food safety, eliminating concerns about human health caused by C. jejuni in future food, and promoting the natural antibacterial agent EGCG application in the food industry.

Discovery of indole analogues from Periplaneta americana extract and their activities on cell proliferation and recovery of ulcerative colitis in mice.

Background: As an important medicinal insect, Periplaneta americana (PA) has been applied for the treatment of wounds, burns, and ulcers with fewer side effects and a reduced recurrence rate, which provides great potential for developing new drugs based on its active constituents. Materials and methods: The main chromatographic peaks determined by high performance liquid chromatography (HPLC) in the PA concentrated ethanol-extract liquid (PACEL) were separated, purified, and identified by semi-preparative LC, mass spectrum, and 1H NMR spectroscopic analysis. The biological activities of the identified compounds were investigated by methylthiazolyldiphenyl-tetrazolium bromide (MTT) method based on in vitro human skin fibroblasts (HSF) and in vivo experiments based on dextran sulfate sodium (DSS)-induced ulcerative colitis (UC) mouse model. Furthermore, RT-qPCR of six genes related to inflammation or intestinal epithelial cell proliferation was employed to investigate the molecular mechanism of the indole analogues recovering UC in mice. Results: Five indole analogues were purified and identified from PACEL, including tryptophan (Trp), tryptamine (pa01), 1,2,3,4-tetrahydrogen-ß-carboline-3-carboxylic acid (pa02), (1S, 3S)-1-methyl-1,2,3,4-tetrahydrogen-ß-carboline-3-carboxylic acid (pa03), and (1R, 3S)-1-methyl-1,2,3,4-tetrahydrogen-ß-carboline-3-carboxylic acid (pa04), among which the pa02 and pa04 were reported in PA for the first time. In vitro and in vivo experiments showed that PACEL, Trp, and pa02 had promoting HSF proliferation activity and intragastric administration of them could alleviate symptoms of weight loss and colon length shortening in the UC mice. Although recovery activity of the compound pa01 on the colon length was not as obvious as other compounds, it showed anti-inflammatory activity in histological analysis. In addition, The RT-qPCR results indicated that the three indole analogues could alleviate DSS-induced intestinal inflammation in mice by inhibiting pro-inflammatory cytokines (MMP7, IL1α) and down-regulating BMP8B expression. Conclusion: This study reported the isolation, purification, structure identification, and biological activity of the active indole analogues in PACEL. It was found for the first time that the PA extract contained many indole analogues and Trp, which exhibited good proliferation activity on HSF fibroblasts as well as anti-UC activity in mice. These indole analogues probably are important components related to the pharmacological activity in PA.

[Application of stable isotope techniques in soil food web research]. / ç¨³å®šåŒä½ç´ æŠ€æœ¯åœ¨åœŸå£¤é£Ÿç‰©ç½‘ç ”ç©¶ä¸­çš„åº”ç”¨.

Stable isotope technique is important for understanding the structure and function of soil food web, which is considered as a belowground black box. We reviewed typical application cases of stable isotope techniques in the research of soil food webs, including to determine food sources and feeding preferences of soil fauna by using isotopes, and to analyze the trophic structure of soil food webs through isotope fractionation effects during the process of feeding and nutrient sequestration by soil fauna. Additionally, stable isotope techniques could reveal the role of soil biota at different trophic levels within soil food web in ecosystem matter and energy flow, which favored to carry out accurate and efficient research on the contribution of soil food webs to soil carbon and nitrogen cycling process and the corresponding influence mechanism. We further put forward the limitations of current stable isotope techniques and the future development directions.

Phytochemical Profiling, Isolation, and Pharmacological Applications of Bioactive Compounds from Insects of the Family Blattidae Together with Related Drug Development.

In traditional Chinese medicine (TCM), insects from the family Blattidae have a long history of application, and their related active compounds have excellent pharmacological properties, making them a prominent concern with significant potential for medicinal and healthcare purposes. However, the medicinal potential of the family Blattidae has not been fully exploited, and many problems must be resolved urgently. Therefore, a comprehensive review of its chemical composition, pharmacological activities, current research status, and existing problems is necessary. In order to make the review clearer and more systematic, all the contents were independently elaborated and summarized in a certain sequence. Each part started with introducing the current situation or a framework and then was illustrated with concrete examples. Several pertinent conclusions and outlooks were provided after discussing relevant key issues that emerged in each section. This review focuses on analyzing the current studies and utilization of medicinal insects in the family Blattidae, which is expected to provide meaningful and valuable relevant information for researchers, thereby promoting further exploration and development of lead compounds or bioactive fractions for new drugs from the insects.

LncRNA H19 acts as miR-301a-3p sponge to alleviate lung injury in mice with sepsis by regulating Adcy1.

BACKGROUND: The abnormal expression of long non-coding RNA (lncRNA) is closely related to disease progression. However, the role and mechanism of lncRNA H19 (lncH19) in sepsis-induced lung injury remain to be elucidated. METHODS: Cercal ligation and puncture (CLP) mice models and lipopolysaccharide (LPS)-induced cell injury model was used to construct sepsis-induced lung injury in vivo and in vitro. The expression of lncH19, microRNA (miR)-301a-3p, and adenylate cyclase 1 (Adcy1) mRNA was assessed using quantitative real-time PCR. The concentrations of inflammatory factors were determined by ELISA assay. Cell proliferation and apoptosis were determined using cell counting kit 8 assay, EdU staining, and flow cytometry. The protein expression of apoptosis markers and Adcy1 was examined by western blot analysis. Oxidative stress was assessed by detecting the contents of oxidative stress markers. The interaction between miR-301a-3p and lncH19 or Adcy1 was confirmed using RNA pull-down assay, dual-luciferase reporter assay, and RIP assay. RESULTS: LncH19 was lowly expressed in CLP mice models and LPS-induced cell injury models. Overexpressed lncH19 could alleviate CLP-induced lung injury in mice, as well as LPS-induced cell apoptosis, inflammation, and oxidative stress. MiR-301a-3p could be sponged by lncH19, and its overexpression could reverse the inhibition of lncH19 on LPS-induced cell injury. Adcy1 was a target of miR-301a-3p, and its expression was upregulated by lncH19. Silencing of Adcy1 could abolish the suppressive effect of the miR-301a-3p inhibitor on LPS-induced cell injury. CONCLUSION: LncH19 might inhibit sepsis-induced lung injury by acting as a sponge of miR-301a-3p to upregulate Adcy1. HIGHLIGHTSLncH19 overexpression relieves CLP-induced lung injury and LPS-induced cell injury.LncH19 directly sponges miR-301a-3p.MiR-301a-3p targets Adcy1.

The combination of thymol and cinnamaldehyde reduces the survival and virulence of Listeria monocytogenes on autoclaved chicken breast.

AIMS: To reveal the antibacterial mechanism of the combination of thymol and cinnamaldehyde to Listeria monocytogenes ATCC 19115 on autoclaved chicken breast. METHODS AND RESULTS: In this study, L. monocytogenes ATCC 19115 on autoclaved chicken breast was exposed to the stress of 125 µg/ml thymol and 125 µg/ml cinnamaldehyde, and transcriptome analysis was used to reveal the crucial antibacterial mechanism. According to the results, 1303 significantly differentially expressed genes (DEGs) were identified. Treated by thymol and cinnamaldehyde in combination, pyrimidine and branched-chain amino acid biosynthesis of L. monocytogenes were thwarted which impairs its nucleic acid biosynthesis and intracellular metabolism. The up-regulated DEGs involved in membrane composition and function contributed to membrane repair. Besides, pyruvate catabolism and TCA cycle were restrained which brought about the disturbance of amino acid metabolism. ABC transporters were also perturbed, for instance, the uptake of cysteine, D-methionine, and betaine was activated, while the uptake of vitamin, iron, and carnitine was repressed. Thus, L. monocytogenes tended to activate PTS, glycolysis, glycerol catabolism, and pentose phosphate pathways to obtain energy to adapt to the hostile condition. Noticeably, DEGs involved in virulence factors were totally down-regulated, including genes devoted to encoding flagella, chemotaxis, biofilm formation, internalin as well as virulence gene clusters. CONCLUSIONS: The combination of thymol and cinnamaldehyde is effective to reduce the survival and potential virulence of L. monocytogenes on autoclaved chicken breast. SIGNIFICANCE AND IMPACT OF STUDY: This work contributes to providing theoretical information for the application and optimization of thymol and cinnamaldehyde in ready-to-eat meat products to inhibit L. monocytogenes.

Chemical Modifications of Ag Catalyst Surfaces with Imidazolium Ionomers Modulate H2 Evolution Rates during Electrochemical CO2 Reduction.

Bridging polymer design with catalyst surface science is a promising direction for tuning and optimizing electrochemical reactors that could impact long-term goals in energy and sustainability. Particularly, the interaction between inorganic catalyst surfaces and organic-based ionomers provides an avenue to both steer reaction selectivity and promote activity. Here, we studied the role of imidazolium-based ionomers for electrocatalytic CO2 reduction to CO (CO2R) on Ag surfaces and found that they produce no effect on CO2R activity yet strongly promote the competing hydrogen evolution reaction (HER). By examining the dependence of HER and CO2R rates on concentrations of CO2 and HCO3-, we developed a kinetic model that attributes HER promotion to intrinsic promotion of HCO3- reduction by imidazolium ionomers. We also show that varying the ionomer structure by changing substituents on the imidazolium ring modulates the HER promotion. This ionomer-structure dependence was analyzed via Taft steric parameters and density functional theory calculations, which suggest that steric bulk from functionalities on the imidazolium ring reduces access of the ionomer to both HCO3- and the Ag surface, thus limiting the promotional effect. Our results help develop design rules for ionomer-catalyst interactions in CO2R and motivate further work into precisely uncovering the interplay between primary and secondary coordination in determining electrocatalytic behavior.

3D Printed Nickel-Molybdenum-Based Electrocatalysts for Hydrogen Evolution at Low Overpotentials in a Flow-Through Configuration.

Three-dimensional (3D) printed, hierarchically porous nickel molybdenum (NiMo) electrocatalysts were synthesized and evaluated in a flow-through configuration for the hydrogen evolution reaction (HER) in 1.0 M KOH(aq) in a simple electrochemical H-cell. 3D NiMo electrodes possess hierarchically porous structures because of the resol-based aerogel precursor, which generates superporous carbon aerogel as a catalyst support. Relative to a traditional planar electrode configuration, the flow-through configuration allowed efficient removal of the hydrogen bubbles from the catalyst surface, especially at high operating current densities, and significantly decreased the overpotentials required for HER. An analytical model that accounted for the electrokinetics of HER as well as the mass transport with or without the flow-through configuration was developed to quantitatively evaluate voltage losses associated with kinetic overpotentials and ohmic resistance due to bubble formation in the porous electrodes. The chemical composition, electrochemical surface area (ECSA), and roughness factor (RF) were also systematically studied to assess the electrocatalytic performance of the 3D printed, hierarchically porous NiMo electrodes. An ECSA of 25163 cm2 was obtained with the highly porous structures, and an average overpotential of 45 mV at 10 mA cm-2 was achieved over 24 h by using the flow-through configuration. The flow-through configuration evaluated in the simple H-cell achieved high electrochemical accessible surface areas for electrochemical reactions and provided useful information for adaption of the porous electrodes in flow cells.

3D-Printable Fluoropolymer Gas Diffusion Layers for CO2 Electroreduction.

The electrosynthesis of value-added multicarbon products from CO2 is a promising strategy to shift chemical production away from fossil fuels. Particularly important is the rational design of gas diffusion electrode (GDE) assemblies to react selectively, at scale, and at high rates. However, the understanding of the gas diffusion layer (GDL) in these assemblies is limited for the CO2 reduction reaction (CO2 RR): particularly important, but incompletely understood, is how the GDL modulates product distributions of catalysts operating in high current density regimes > 300 mA cm-2 . Here, 3D-printable fluoropolymer GDLs with tunable microporosity and structure are reported and probe the effects of permeance, microstructural porosity, macrostructure, and surface morphology. Under a given choice of applied electrochemical potential and electrolyte, a 100× increase in the C2 H4 :CO ratio due to GDL surface morphology design over a homogeneously porous equivalent and a 1.8× increase in the C2 H4 partial current density due to a pyramidal macrostructure are observed. These findings offer routes to improve CO2 RR GDEs as a platform for 3D catalyst design.

Refractive index matched polymeric and preceramic resins for height-scalable two-photon lithography.

Nanofabrication techniques that can generate large and complex 3D structures with nanoscale features are becoming increasingly important in the fields of biomedicine, micro-optics, and microfluidics. Direct laser writing via two-photon polymerization (DLW-TPP) is one such technique that relies on nonlinear absorption of light to form nanoscale 3D features. Although DLW-TPP provides the required nanoscale resolution, its built height is often limited to less than a millimetre. This height limitation is driven by the need to tightly focus the laser beam at arbitrary depths within the photopolymer. This requirement necessitates matching the photopolymer's refractive index to specific values but the required techniques have not been disseminated widely in the open scientific literature. To address this knowledge gap, we test two universal, different approaches to generate refractive index-matched polymeric and preceramic resins and demonstrate their performance by printing of fine submicron features in 3D structures as tall as 2.5 mm. Specifically, we achieve index-matching by mixing commercially-available resins or covalent modification of functional monomers. This work investigates the relationship of voxel shape to RI mismatch, and presents tuning of RI through mixing and covalent modification to a nonconventional material system of preceramic resin which has never been demonstrated before. We demonstrate the material flexibility by generating 3D silicon oxycarbide structures from preceramic resists while simultaneously eliminating the part-height limitation of conventional DLW-TPP.

Electrical and Optical Properties of a Transparent Conductive ITO/Ga2O3/Ag/Ga2O3 Multilayer for Ultraviolet Light-Emitting Diodes.

We fabricated an indium tin oxide (ITO)/Ga2O3/Ag/Ga2O3 multilayer as a transparent conductive electrode for ultraviolet light-emitting diodes (UV LEDs). The electrical and optical properties of the multilayer were improved by optimizing the annealing temperature of the ITO contact layer and the whole ITO/Ga2O3/Ag/Ga2O3 multilayer, and the thickness of the ITO contact layer and Ag metal layer. After optimization, the sheet resistance and transmittance of the ITO/Ga2O3/Ag/Ga2O3 multilayer was 3.43 Ω/sq and 86.4% at 335 nm, respectively. The ITO/Ga2O3/Ag/Ga2O3 multilayer also exhibited a good ohmic contact characteristic with a specific contact resistance of 1.45×10-3 Ω·cm². These results show that the proposed ITO/Ga2O3/Ag/Ga2O3 multilayer is a promising alternative as a p-type electrode for UV LEDs.

Fabrication and Characterization of AlGaN-Based UV LEDs with a ITO/Ga2O3/Ag/Ga2O3 Transparent Conductive Electrode.

We fabricated a complex transparent conductive electrode (TCE) based on Ga2O3 for AlGaN-based ultraviolet light-emitting diodes. The complex TCE consists of a 10 nm ITO, a 15 nm Ga2O3, a 7 nm Ag, and a 15 nm Ga2O3, forming a ITO/Ga2O3/Ag/Ga2O3 multilayer. The metal layer embedded into Ga2O3 and the thin ITO contact layer improves current spreading and electrode contact properties. It is found that the ITO/Ga2O3/Ag/Ga2O3 multilayer can reach a 92.8% transmittance at 365 nm and a specific contact resistance of 10-3 Ω·cm² with suitable annealing conditions.

Cough hypersensitivity in patients with obstructive sleep apnea hypopnea syndrome.

PURPOSE: The purpose of this study was to investigate cough hypersensitivity and its potential mechanisms in patients with obstructive sleep apnea hypopnea syndrome (OSAHS). METHODS: Fifteen OSAHS patients, 12 simple snoring patients, and 15 healthy volunteers received cough sensitivity test and induced sputum cytology. Cough thresholds C2 and C5 (the minimum of capsaicin inducing ≥ 2 and ≥ 5 coughs, respectively), total cell count, cell differentials and the levels of bradykinin, histamine, prostaglandin E2, substance P, calcitonin gene-related peptide, pepsin, and interleukin-2 in the induced sputum detected by enzyme-linked immunosorbent assay were compared. The linear correlation between lgC2 and lgC5 and apnea hypopnea index, cell differentials, and inflammatory mediators in the induced sputum was calculated in OSAHS patients. RESULTS: OSAHS patients presented with a significant lower C2 and C5 (P < 0.01), increased lymphocyte but decreased macrophage and neutrophil proportions in the induced sputum (P < 0.01), and higher contents of substance P, calcitonin gene-related peptide and interleukin-2 (P < 0.01) but similar levels of bradykinin, pepsin, prostaglandin E2, and histamine (P > 0.05) in the supernatant of induced sputum, when compared with simple snoring patients and healthy volunteers. However, theses variable were comparable between simple snoring patients and healthy volunteers (P > 0.05). Finally, lgC2 or lgC5 was negatively related to apnea hypopnea index, lymphocyte percentage, and the levels of substance P, calcitonin gene-related peptide or interleukin-2 in the sputum (P < 0.01). There was a positive linear correlation between lymphocyte percentage and interleukin-2 level in the induced sputum (r = 0.63, P = 0.00). CONCLUSION: OSAHS patients have a predisposition of cough hypersensitivity associated with airway inflammation.

Extraction and quantitative analysis of tropane alkaloids in Radix physochlainae by emulsion liquid membrane with tropine-based ionic liquid.

Emulsion liquid membrane (ELM) coupled with tropine-based ionic liquid was prepared and successfully adopted for the extraction and quantitative analysis of tropane alkaloids (TA) in Radix physochlainae. Effects of formation conditions of ELM were explored and then optimized; the ideal oil-water mass ratio was determined to be 1:2.5, chloroform, Span 80 and 0.05 mol L-1N-propyl-tropine hexafluorophosphate ([C3Tr][PF6]) aqueous solution were stirred for 30 min with the speed of 1500 r min-1. In order to extract and enrich TA with ELM efficiently, key factors related with their extraction efficiency such as stirring speed, volume of the extracts (feed solution), migration time and initial concentration of TA were systematically investigated. Under optimal conditions, 1.5 mL extracts containing 1.6 mg mL-1 of TA was stirred with ELM at 250 r min-1 for 5 min, the extraction efficiency of target alkaloid can reach 94.14%. Finally, the method could be used in quantitative analysis of TA in herbal material and patent medicine after demulsification. By comparison, application of ELM for the enrichment and quantitation of TA offers a more straightforward and effective strategy, which is expected to provide a meaningful reference for similar separation processes.

Removal characteristics of two anionic dyes by a polyethylenimine/poly(N,N-dimethylaminoethyl methacrylate) gel.

The highly efficient gel obtained via the copolymerization of polyethylenimine (PEI) and poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) was successfully applied for the removal of two anionic dyes (amaranth and sunset yellow) from their aqueous solutions. Moreover, the results of the adsorption experiments for sunset yellow and amaranth on the PEI/PDMAEMA gel demonstrate that the adsorption equilibrium both could be achieved within 1 h, and the maximum adsorption capacities were 757 mg g-1 and 744 mg g-1 under unoptimized conditions, respectively. Moreover, the PEI/PDMAEMA composite gel was found to be pH-sensitive and the addition of salts together with ionic strength were also explored for understanding the adsorption performance. In addition, it can be found from the studies of adsorption mechanism that it is mainly electrostatic adsorption; moreover, the separation process conforms to the Langmuir adsorption isotherm model and the pseudo second-order kinetic model, which is a spontaneous endothermic process. When the PEI/PDMAEMA gel was used in continuous flow column, it could handle large volumes of dye solution with very low concentrations due to its strong enrichment capacity. Finally, the desorption experiments show that the PEI/PDMAEMA gel is easier to regenerate and has a longer lifetime. Therefore, the high adsorption capacity and easy operation of adsorption for amaranth and sunset yellow on the PEI/PDMAEMA gel make it a potential application prospect for the practical removal of other kinds of similar pollutants.

Extraction in cholinium-based magnetic ionic liquid aqueous two-phase system for the determination of berberine hydrochloride in Rhizoma coptidis.

A magnetic ionic liquids (MILs)-based aqueous two-phase system (MIL-ATPs) obtained by mixing with a series of inorganic salts, which involves five cholinium MILs with the piperidinyloxy radical anion is reported for the first time. Phase diagrams for the new ATPs were experimentally determined at different temperatures (298.15-318.15 K) and the liquid-liquid equilibrium data for two-phase systems were correlated according to the empirical nonlinear expression. The effects of the types of MILs, temperature and inorganic salts on the binodal curve are discussed in detail. The MIL-ATPs coupled with HPLC-UV analysis was developed in the quantitation of berberine hydrochloride in Rhizoma coptidis. Under optimal conditions, the partition coefficient of berberine hydrochloride was 127.68 with the precision values (RSD%) of 1.40% and 2.83% for intra-day (n = 6) and inter-day (n = 3), respectively. The limit of detection (LOD) and limit of quantification (LOQ) for berberine hydrochloride were 0.023 mg L-1 and 0.077 mg L-1, respectively. The recoveries were obtained in the acceptable range of 97.4-101.2%. Moreover, the content of berberine hydrochloride in the raw material of Rhizoma coptidis was measured as 123.95 mg g-1 with this method. Finally, 99.8% MIL was recovered for cycle application after the removal of berberine hydrochloride by using D101 resin. This study provides a meaningful reference for the application of MIL-ATPs with great prospects.

A stepwise protocol for the treatment of refractory gastroesophageal reflux-induced chronic cough.

BACKGROUND: Refractory gastroesophageal reflux-induced chronic cough (GERC) is difficult to manage. The purpose of the study is to evaluate the efficacy of a novel stepwise protocol for treating this condition. METHODS: A total of 103 consecutive patients with suspected refractory reflux-induced chronic cough failing to a standard anti-reflux therapy were treated with a stepwise therapy. Treatment commences with high-dose omeprazole and, if necessary, is escalated to subsequent sequential treatment with ranitidine and finally baclofen. The primary end-point was overall cough resolution, and the secondary end-point was cough resolution after each treatment step. RESULTS: High-dose omeprazole eliminated or improved cough in 28.1% of patients (n=29). Further stepwise of treatment with the addition of ranitide yielded a favorable response in an additional 12.6% (n=13) of patients, and subsequent escalation to baclofen provoked response in another 36.9% (n=38) of patients. Overall, this stepwise protocol was successful in 77.6% (n=80) of patients. The diurnal cough symptom score fell from 3 [1] to 1 [0] (Z=6.316, P=0.000), and the nocturnal cough symptom score decreased from 1 [1] to 0 [1] (Z=-4.511, P=0.000), with a corresponding reduction in the Gastroesophageal Reflux Diagnostic Questionnaire score from 8.6±1.7 to 6.8±0.7 (t=3.612, P=0.000). Conversely, the cough threshold C2 to capsaicin was increased from 0.49 (0.49) µmol/L to 1.95 (2.92) µmol/L (Z=-5.892, P=0.000), and the cough threshold C5 was increased from 1.95 (2.92) µmol/L to 7.8 (5.85) µmol/L (Z=-5.171, P=0.000). CONCLUSIONS: Sequential stepwise anti-reflux therapy is a useful therapeutic strategy for refractory reflux-induced chronic cough.

Segmental Dynamics and Dielectric Constant of Polysiloxane Polar Copolymers as Plasticizers for Polymer Electrolytes.

Dielectric relaxation spectroscopy was used to investigate the segmental dynamics of a series of siloxane-based polar copolymers combining pendant cyclic carbonates and short poly(ethylene oxide) (PEO) chains. The homopolymer with cyclic carbonate as the only side chain exhibits higher glass transition temperature T(g) and dielectric constant ε(s) than the one with only PEO side chains. For their copolymers the observed T(g) (agreeing well with the predicted values from the Fox equation) and ε(s) decrease with increasing PEO side chain content. These polar polymers exhibit a glassy ß relaxation with Arrhenius character, attributed to local chain motions of side groups attached to the main chain, and a segmental α relaxation, associated with the glass transition with a Vogel temperature dependence. As PEO side chain content increases, narrowing of the local glassy ß relaxation was observed in the copolymers. The segmental α dynamics were observed to be faster, with an increase in breadth and decrease in strength with increasing PEO side chain content. Owing to the trade-off between T(g) and ε(s), copolymers of intermediate composition result in the highest ionic conductivity when these copolymers are used to plasticize Li single-ion conducting ionomers.

Comparison of clinical characteristics of chronic cough due to non-acid and acid gastroesophageal reflux.

BACKGROUND AND OBJECTIVE: Little is known about non-acid gastroesophageal reflux-induced chronic cough (GERC). The purpose of the study is to explore the clinical characteristics of non-acid GERC. METHODS: Clinical symptoms, cough symptom score, capsaicin cough sensitivity, gastroesophageal reflux diagnostic questionnaire (GerdQ) score, findings of multichannel intraluminal impedance-pH monitoring (MII-pH) and response to pharmacological anti-reflux therapy were retrospectively reviewed in 38 patients with non-acid GERC and compared with those of 49 patients with acid GERC. RESULTS: Non-acid GERC had the similar cough character, cough symptom score, and capsaicin cough sensitivity to acid GERC. However, non-acid GERC had less frequent regurgitation (15.8% vs 57.1%, χ(2) = 13.346, P = 0.000) and heartburn (7.9% vs 32.7%, χ(2) = 7.686, P = 0.006), and lower GerdQ score (7.4 ± 1.4 vs 10.6 ± 2.1, t = -6.700, P = 0.003) than acid GERC. Moreover, MII-pH revealed more weakly acidic reflux episodes, gas reflux episodes and a higher symptom association probability (SAP) for non-acid reflux but lower DeMeester score, acidic reflux episodes and SAP for acid reflux in non-acid GERC than in acid GERC. Non-acid GERC usually responded to the standard anti-reflux therapy but with delayed cough resolution or attenuation when compared with acid GERC. Fewer patients with non-acid GERC needed an augmented acid suppressive therapy or treatment with baclofen. CONCLUSIONS: There are some differences in the clinical manifestations between non-acid and acid GERC, but MII-pH is essential to diagnose non-acid GERC.