RESUMO
Incorporating dilute doping and controlled synthesis provides a means to modulate the microstructure, defect density, and transport properties. Transmission electron microscopy (TEM) and geometric phase analysis (GPA) have revealed that hot-pressing can increase defect density, which redistributes strain and helps prevent unwanted Ge precipitates formation. An alloy of GeTe with a minute amount of indium added has shown remarkable TE properties compared to its undoped counterpart. Specifically, it achieves a maximum figure-of-merit zT of 1.3 at 683 K and an exceptional TE conversion efficiency of 2.83% at a hot-side temperature of 723 K. Significant zT and conversion efficiency improvements are mainly due to domain density engineering facilitated by an effective hot-pressing technique applied to lightly doped GeTe. The In-GeTe alloy exhibits superior TE properties and demonstrates notable stability under significant thermal gradients, highlighting its promise for use in mid-temperature TE energy generation systems.
RESUMO
Surface diffusion is intimately correlated with crystal orientation and surface structure. Fast surface diffusion accelerates phase transformation and structural evolution of materials. Here, through in situ transmission electron microscopy observation, we show that a copper nanowire with dense nanoscale coherent twin-boundary (CTB) defects evolves into a zigzag configuration under electric-current driven surface diffusion. The hindrance at the CTB-intercepted concave triple junctions decreases the effective surface diffusivity by almost 1 order of magnitude. The energy barriers for atomic migration at the concave junctions and different faceted surfaces are computed using density functional theory. We proposed that such a stable zigzag surface is shaped not only by the high-diffusivity facets but also by the stalled atomic diffusion at the concave junctions. This finding provides a defect-engineering route to develop robust interconnect materials against electromigration-induced failures for nanoelectronic devices.
RESUMO
Cuprous oxide (Cu2O) films are electrodeposited on fluorinated tin oxide (FTO) substrates with controlled crystallographic orientation and optimized film thickness. The Cu2O films exhibit a (100)-to-(111) texture change and a pyramid-to-cuboidal crystallite morphology transformation by increasing the electrodeposition current density. The cuboidal crystallites enclosed by (100) sidewalls and (111) truncated surfaces demonstrate better photoelectrochemical property than the pyramid crystallites. By introducing a copper(I) telluride (Cu2Te) layer in between Cu2O and FTO, the photocurrent density increases 70% for the (111)-textured Cu2O film in a 1 M Na2SO4 solution under AM1.5 G illumination. The enhancement is mainly attributed to the improved separation of photocarriers in the illuminated Cu2O film by pumping hole carriers to the Cu2Te layer. In contrast to typical electron pathway management, this study provides an alternative route to improve the photoelectrochemical performance of Cu2O-based photocathodes through hole pathway modification.
RESUMO
Thermoelectric (TE) research is not only a course of materials by discovery but also a seedbed of novel concepts and methodologies. Herein, the focus is on recent advances in three emerging paradigms: entropy engineering, phase-boundary mapping, and liquid-like TE materials in the context of thermodynamic routes. Specifically, entropy engineering is underpinned by the core effects of high-entropy alloys; the extended solubility limit, the tendency to form a high-symmetry crystal structure, severe lattice distortions, and sluggish diffusion processes afford large phase space for performance optimization, high electronic-band degeneracy, rich multiscale microstructures, and low lattice thermal conductivity toward higher-performance TE materials. Entropy engineering is successfully implemented in half-Huesler and IV-VI compounds. In Zintl phases and skutterudites, the efficacy of phase-boundary mapping is demonstrated through unraveling the profound relations among chemical compositions, mutual solubilities of constituent elements, phase instability, microstructures, and resulting TE properties at the operation temperatures. Attention is also given to liquid-like TE materials that exhibit lattice thermal conductivity at lower than the amorphous limit due to intensive mobile ion disorder and reduced vibrational entropy. To conclude, an outlook on the development of next-generation TE materials in line with these thermodynamic routes is given.
RESUMO
The glucose level is an important biological indicator for diabetes diagnosis. In contrast with costly and unstable enzymatic glucose sensing, oxide-based glucose sensors own the advantages of low fabrication cost, outstanding catalytic ability, and high chemical stability. Here, we fabricate a self-supporting spiky Cu x O/Cu nanowire array structure by electrochemical cycling treatment. The spiky Cu x O/Cu nanowire is identified to be a Cu core passivated by a conformal Cu2O layer with extruded CuO petals, which provides abundant active sites for electrocatalytic reaction in glucose detection. An interruptive potential sweeping experiment is presented to elucidate the growth mechanism of the spiky Cu x O/Cu nanostructure during the potential cycling treatment. The spiky Cu x O/Cu nanowire array electrode exhibits a sensitivity of 1210 ± 124 µA·mM-1·cm-2, a wide linear detection range of 0.01-7 mM, and a short response time (<1 s) for amperometric glucose sensing. The study demonstrates a route to modulate oxide phase, crystal morphology, and electrocatalytic properties of metal/oxide core-shell nanostructures.
RESUMO
Cuprous oxide (Cu2O) that has a direct bandgap corresponding to visible-light absorption exhibits versatile functionalities, which are appealing to solar cell, photocatalyst, bio-sensing and water splitting applications. However, photolysis stability has long been a problem for Cu2O under light exposure and a humid environment. Here, we found that the Cu2O layer grown on Cu nanowires (CuNWs) with high-density nanoscale twin boundaries can maintain the integrity of Cu/Cu2O core-shell structure under ambient air conditions for more than one year. The Cu2O on nanotwinned CuNWs also demonstrates much higher stability in humid air and water with light exposure than its counterpart on nanocrystalline CuNWs. The superior photolysis stability of Cu2O is attributed to (1) photoelectrons drained to the Cu core, (2) limited vacancy sources in the Cu2O layer and (3) the suppressed out-diffusion of Cu cations through the oxide layer. It is suggested that the presence of nanoscale twin boundaries modifies the atomic surface structure of the CuNWs and alters the photolysis reaction of Cu2O.
RESUMO
Lattice-mismatch is an important factor for the heteroepitaxial growth of core-shell nanostructures. A large lattice-mismatch usually leads to a non-coherent interface or a polycrystalline shell layer. In this study, a conformal Ag layer is coated on Cu nanowires with dense nanoscale twin boundaries through a galvanic replacement reaction. Despite a large lattice mismatch between Ag and Cu (â¼12.6%), the Ag shell replicates the twinning structure in Cu nanowires and grows epitaxially on the nanotwinned Cu nanowire. A twin-mediated growth mechanism is proposed to explain the epitaxy of high lattice-mismatch bimetallic systems in which the misfit dislocations are accommodated by coherent twin boundaries.
RESUMO
Cavitation and hollow structures can be introduced in nanomaterials via the Kirkendall effect in an alloying or reaction system. By introducing dense nanoscale twins into copper nanowires (CuNWs), we change the surface structure and prohibit void formation in oxidation of the nanowires. The nanotwinned CuNW exhibits faceted surfaces of very few atomic steps as well as a very low vacancy generation rate at copper/oxide interfaces. Together they lower the oxidation rate and eliminate void formation at the copper/oxide interface. We propose that the slow reaction rate together with the highly effective vacancy absorption at interfaces leads to a lattice shift in the oxidation reaction. Our findings suggest that the nanoscale Kirkendall effect can be manipulated by controlling the internal and surface crystal defects of nanomaterials.
RESUMO
By adding nanotwins to Cu, the surface electromigration (EM) slows down. The atomic mobility of the surface step-edges is retarded by the triple points where a twin meets a free surface to form a zigzag-type surface. We observed that EM can alter the zigzag surface structure to optimize the reduction of EM, according to Le Chatelier's principle. Statistically, the optimal alternation is to change an arbitrary (111)/(hkl) zigzag pair to a pair having a very low index (hkl) plane, especially the (200) plane. Using in situ ultrahigh vacuum and high-resolution transmission electron microscopy, we examined the effects of different zigzag surfaces on the rate of EM. The calculated rate of surface EM can be decreased by a factor of ten.
RESUMO
Effects of Ag doping and thermal annealing temperature on thermoelectric transport properties of Bi2(Se,Te)3 compounds are investigated. On the basis of the comprehensive analysis of carrier concentration, Hall mobility, and lattice parameter, we identified two Ag-related interstitial (Agi) and substitutional (AgBi) defects that modulate in different ways the thermoelectric properties of Ag-doped Bi2(Se,Te)3 compounds. When Ag content is less than 0.5 wt %, Agi plays an important role in stabilizing crystal structure and suppressing the formation of donor-like Te vacancy (VTe) defects, leading to the decrease in carrier concentration with increasing Ag content. For the heavily doped Bi2(Se,Te)3 compounds (>0.5 wt % Ag), the increasing concentration of AgBi is held responsible for the increase of electron concentration because formation of AgBi defects is accompanied by annihilation of hole carriers. The analysis of Seebeck coefficients and temperature-dependent electrical properties suggests that electrons in Ag-doped Bi2(Se,Te)3 compounds are subject to a mixed mode of impurity scattering and lattice scattering. A 10% enhancement of thermoelectric figure-of-merit at room temperature was achieved for 1 wt % Ag-doped Bi2(Se,Te)3 as compared to pristine Bi2(Se,Te)3.
RESUMO
We herein report a gas-solid transformation mechanism for the surfactant-free synthesis of Te NWs at room temperature by electrolysis of bulk Bi2Te3 using H2Te gas. Te NWs, with an average diameter below 20 nm, grow along the [001] direction due to the unique spiral chains in the crystal structure and show an enhanced Raman scattering effect, a broad absorption band over the range of 350-750 nm and an emission band over the range of 400-700 nm in the photoluminescence spectrum. In terms of device applications, we demonstrate how Te NWs can be directly applied as a p-type dopant source in order to shift the Dirac point in ambipolar field effect graphene transistors. Finally, the favorable capacitive properties of Te NWs are established as supercapacitor electrodes with negligible internal resistance and excellent electrochemical reversibility and a specific capacitance of 24 F g(-1).
RESUMO
Densely nanotwinned Cu nanowire (NW) arrays with an identical diameter of â¼55 nm were fabricated by pulse electrochemical deposition at low temperature using anodic aluminum oxide as a template. Different growth orientations of nanotwinned Cu nanowire arrays were investigated. The endurance of the electrical current density before breakdown of the nanotwinned Cu NWs can reach up to 2.4 × 10(8) A cm(-2). The formation of highly dense nanotwins is attributed to relaxation of coalescence induced stress and twin fault stacking when Cu NWs grow by two-dimensional kinetics. A mechanism based on the twinning structure effect on the electromigration was proposed to explain the improved electrical endurance of Cu. The result demonstrates that the formation of nanotwins into Cu NWs can effectively suppress the void growth, leading to extended life time for use in electronic devices.
RESUMO
Nanolizing of thermoelectric materials is one approach to reduce the thermal conductivity and hence enhance the figure of merit. Bismuth telluride (Bi2Te3)-based materials have excellent figure of merit at room temperature. For device applications, precise control and rapid fabrication for the nanostructure of thermoelectric materials are essential issues. In the present study, we demonstrate a one-step electrolysis process to directly form Bi2Te3 nanosheet arrays (NSAs) on the surface of bulk Bi2Te3 with controllable spacing distance and depth by tuning the applied bias and duration. The single sheet of NSAs reveals that the average thickness and electrical resistivity of single crystalline Bi2Te3 in composition are 399.8 nm and 137.34 µΩ m, respectively. The formation mechanism of NSAs has been proposed. A 1.12% efficiency of quantum dot-sensitized solar cells with Bi2Te3 NSAs for counter electrode has been demonstrated, indicating that Bi2Te3 NSAs from top-down processing with a high ratio of surface area to volume are a promising candidate for possible applications such as thermoelectrics, dye-sensitized solar cells (DSSCs), and lithium-ion batteries.
RESUMO
Grain boundaries affect the migration of atoms and electrons in polycrystalline solids, thus influencing many of the mechanical and electrical properties. By introducing nanometer-scale twin defects into copper grains, we show that we can change the grain-boundary structure and atomic-diffusion behavior along the boundary. Using in situ ultrahigh-vacuum and high-resolution transmission electron microscopy, we observed electromigration-induced atomic diffusion in the twin-modified grain boundaries. The triple point where a twin boundary meets a grain boundary was found to slow down grain-boundary and surface electromigration by one order of magnitude. We propose that this occurs because of the incubation time of nucleation of a new step at the triple points. The long incubation time slows down the overall rate of atomic transport.