Highly Efficient Mixed Conduction in a Fused Oligomer n-Type Organic Semiconductor Enabled by 3D Transport Pathways.

Tailoring organic semiconductors to facilitate mixed conduction of ionic and electronic charges when interfaced with an aqueous media has spurred many recent advances in organic bioelectronics. The field is still restricted, however, by very few n-type (electron-transporting) organic semiconductors with adequate performance metrics. Here, a new electron-deficient, fused polycyclic aromatic system, TNR, is reported with excellent n-type mixed conduction properties including a µC* figure-of-merit value exceeding 30 F cm-1 V-1 s-1 for the best performing derivative. Comprising three naphthalene bis-isatin moieties, this new molecular design builds on successful small-molecule mixed conductors; by extending the molecular scaffold into the oligomer domain, good film-forming properties, strong π-π interactions, and consequently excellent charge-transport properties are obtained. Through judicious optimization of the side chains, the linear oligoether and branched alkyl chain derivative bgTNR is obtained which shows superior mixed conduction in an organic electrochemical transistor configuration including an electron mobility around 0.3 cm2 V-1 s-1 . By optimizing the side chains, the dominant molecular packing can be changed from a preferential edge-on orientation (with high charge-transport anisotropy) to an oblique orientation that can support 3D transport pathways which in turn ensure highly efficient mixed conduction properties across the bulk semiconductor film.

Enhancing the Performance of N-Type Thermoelectric Devices via Tuning the Crystallinity of Small Molecule Semiconductors.

In the development of high-performance organic thermoelectric devices, n-type materials, especially with small molecule semiconductors, lags far behind p-type materials. In this paper, three small molecules are synthesized based on electron-deficient naphthalene bis-isatin building blocks bearing different alkyl chains with the terminal functionalized with 3-ethylrhodanine unit and studied their aggregation and doping mechanism in detail. It is found that crystallinity plays an essential role in tuning the doping behavior of small molecules. Molecules with too strong crystallinity tend to aggregate with each other to form large crystalline domains, which cause significant performance degradation. While molecules with weak crystallinity can tolerate more dopants, most of them exhibit low mobility. By tuning the crystallinity carefully, organic thermoelectric devices based on C12NR can maintain high mobility and realize effective doping simultaneously, and a high power factor of 1.07 µW m-1 K-2 at 100 °C is realized. This delicate molecular design by modulating crystallinity provides a new avenue for realizing high-performance organic thermoelectric devices.

Electron-Deficient Polycyclic Molecules via Ring Fusion for n-Type Organic Electrochemical Transistors.

The primary challenge for n-type small-molecule organic electrochemical transistors (OECTs) is to improve their electron mobilities and thus the key figure of merit µC*. Nevertheless, few reports in OECTs have specially proposed to address this issue. Herein, we report a 10-ring-fused polycyclic π-system consisting of the core of naphthalene bis-isatin dimer and the terminal moieties of rhodanine, which features intramolecular noncovalent interactions, high π-delocalization and strong electron-deficient characteristics. We find that this extended π-conjugated system using the ring fusion strategy displays improved electron mobilities up to 0.043 cm2 V-1 s-1 compared to our previously reported small molecule gNR, and thereby leads to a remarkable µC* of 10.3 F cm-1 V-1 s-1 in n-type OECTs, which is the highest value reported to date for small-molecule OECTs. This work highlights the importance of π-conjugation extension in polycyclic-fused molecules for enhancing the performance of n-type small-molecule OECTs.

Fluorinated Alcohol-Processed N-Type Organic Electrochemical Transistor with High Performance and Enhanced Stability.

Tuning the film morphology and aggregated structure is a vital means to improve the performance of the mixed ionic-electronic conductors in organic electrochemical transistors (OECTs). Herein, three fluorinated alcohols (FAs), including 2,2,2-trifluoroethanol (TFE), 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), and perfluoro-tert-butanol (PFTB), were employed as the alternative solvents for engineering the n-type small-molecule active layer gNR. Remarkedly, an impressive µC* of 5.12 F V-1 cm-1 s-1 and a normalized transconductance of 1.216 S cm-1 are achieved from the HFIP-fabricated gNR OECTs, which is three times higher than that of chloroform. The operational stability has been significantly enhanced by the FA-fabricated devices. Such enhancements can be ascribed to the aggregation-induced structural ordering by FAs during spin coating, which optimizes the microstructure of the films for a better mixed ion and electron transport. These results prove the huge research potential of FAs to improve OECT materials' processability, device performance, and stability, therefore promoting practical bio-applications.

Efficient n-Type Small-Molecule Mixed Ion-Electron Conductors and Application in Hydrogen Peroxide Sensors.

Small-molecule semiconductors used as the channel of organic electrochemical transistors (OECTs) have been rarely reported despite their inherent advantages of well-defined molecular weight, convenient scale-up synthesis, and good performance reproducibility. Herein, three small molecules based on perylene diimides are readily prepared for n-type OECTs. The final molecules show preferred energy levels, tunable backbone conformation, and high film crystallinity, rendering them good n-type dopability, favorable volumetric capacities, and substantial electron mobilities. Consequently, the OECTs afford a record-low threshold voltage of 0.05 V and a normalized peak transconductance of 4.52 × 10-2 S cm-1, as well as impressive long-term cycling stability. Significantly, the OECTs utilized for hydrogen peroxide sensing are further demonstrated with a detection limit of 0.75 µM. This work opens the possibility of developing nonfullerene small molecules as superior n-type OECT materials and provides important insights for designing high-performance small-molecule mixed ion-electron conductors for OECTs and (bio)sensors.

Propylene and butylene glycol: new alternatives to ethylene glycol in conjugated polymers for bioelectronic applications.

To date, many of the high-performance conjugated polymers employed as OECT channel materials make use of ethylene glycol (EG) chains to confer the materials with mixed ionic-electronic conduction properties, with limited emphasis placed on alternative hydrophilic moieties. While a degree of hydrophilicity is required to facilitate some ionic conduction in hydrated channels, an excess results in excessive swelling, with potentially detrimental effects on charge transport. This is therefore a subtle balance that must be optimised to maximise electrical performance. Herein a series of polymers based on a bithiophene-thienothiophene conjugated backbone was synthesised and the conventional EG chains substituted by their propylene and butylene counterparts. Specifically, the use of propylene and butylene chains was found to afford polymers with a more hydrophobic character, thereby reducing excessive water uptake during OECT operation and in turn significantly boosting the polymers' electronic charge carrier mobility. Despite the polymers' lower water uptake, the newly developed oligoether chains retained sufficiently high degrees of hydrophilicity to enable bulk volumetric doping, ultimately resulting in the development of polymers with superior OECT performance.

Coupling molecular rigidity and flexibility on fused backbones for NIR-II photothermal conversion.

Great attention is being increasingly paid to photothermal conversion in the near-infrared (NIR)-II window (1000-1350 nm), where deeper tissue penetration is favored. To date, only a limited number of organic photothermal polymers and relevant theory have been exploited to direct the molecular design of polymers with highly efficient photothermal conversion, specifically in the NIR-II window. This work proposes a fused backbone structure locked via an intramolecular hydrogen bonding interaction and double bond, which favors molecular planarity and rigidity in the ground state and molecular flexibility in the excited state. Following this proposal, a particular class of NIR-II photothermal polymers are prepared. Their remarkable photothermal conversion efficiency is in good agreement with our strategy of coupling polymeric rigidity and flexibility, which accounts for the improved light absorption on going from the ground state to the excited state and nonradiative emission on going from the excited state to the ground state. It is envisioned that such a concept of coupling polymeric rigidity and flexibility will offer great inspiration for developing NIR-II photothermal polymers with the use of other chromophores.

The Chemistry and Applications of Heteroisoindigo Units as Enabling Links for Semiconducting Materials.

ConspectusBecause of their low-temperature processing properties and inherent mechanical flexibility, semiconducting materials are promising candidates for enabling flexible displays, renewable energy, biological sensors, and healthcare. Progress has been made in materials performance by developing judicious materials design strategies. For example, improvements in electron transport have required new electron-deficient aromatics. Among them, isoindigo (IID) is an important functional group utilized in conjugated aromatics, where the structure combines two sets of five-membered electron-withdrawing lactam rings, exhibiting enhanced solubility, excellent chemical and thermal stabilities, broad absorption, and intriguing electron affinity.In the past decade, researchers have mainly focused on IID-based materials. However, the effect of heteroatom modification of the IID core has rarely been systemically investigated. In conventional conjugated polymers, single bonds connect the monomers, leading to energetic disorder and torsion defects, while ladder-type polymers are often intractable because of their fused nature. In this regard, the molecular design of new π scaffolds based on IID is central to the development of high-performance semiconductor polymers. Especially, a complete refresh of molecular design strategies and novel conjugated polymers with unique structures are needed to circumvent the disadvantages of the conventional ladder-type polymers.In this Account, we systematically summarize our recent progress in the design, synthesis, and structure-property relationships of IID- and particularly hetero-IID-based functional materials. More specifically, starting with molecular engineering of hetero-IIDs with variable electronic effects, conjugation lengths, and numbers of heterorings, we discuss the effect of the heteroring on the absorption spectra and energy levels. Additionally, we investigate a series of electron-withdrawing substitution of IIDs and hetero-IIDs and their molecular self-assembly behavior and the device performance. Furthermore, we discuss a series of IID-bis(EDOT) copolymers with hydrophilic ethylene glycol side chains for accumulation-mode organic thin-film electrochemical transistors, in which the relationships among the molecular structure, operational stability, film morphology, and device performance were revealed. Compared with IID polymers, the HOMO levels and optical band gaps of the thiophene and thienothiophene IID copolymers markedly decrease, and these polymers exhibit ambipolar charge transport. When we further expanded the IID core to a thieno[3,2-b][1]benzothiophene isoindigo (TBTI) core, such as in TBTIT, bulk-heterojunction solar cells employing this polymer class as the electron donor achieved good efficiency for additive- and annealing-free device conditions. When we introduced electron-deficient pyridine on the IID core, both the LUMO and HOMO energy levels of the copolymers markedly decreased, which significantly improved the electron mobility. In addition, we compare the correlation between the polymer structures of IID and hetero-IID copolymers with thiophene and benzothiophene as comonomers and their absorption spectra and energy levels. In particular, we evaluate the planarity and the dihedral angle between the repeat units, with systematic analysis by theoretical calculations to support our design concepts. We discuss polymer designs arising from simple aldol condensation, where the rigid backbone conformation has been locked by the double bonds. Our polymers display broad absorption from the visible to the NIR-II region, and more importantly, the high electron affinities of these polymers provide a platform to realize ambient-stable electron transport in solution-processed organic thin-film transistors. These exciting results are expected to open doors to new horizons of semiconducting materials in terms of other charming applications and the design and synthesis of superior materials.

Anisotropy of Charge Transport in a Uniaxially Aligned Fused Electron-Deficient Polymer Processed by Solution Shear Coating.

Precise control of the microstructure in organic semiconductors (OSCs) is essential for developing high-performance organic electronic devices. Here, a comprehensive charge transport characterization of two recently reported rigid-rod conjugated polymers that do not contain single bonds in the main chain is reported. It is demonstrated that the molecular design of the polymer makes it possible to achieve an extended linear backbone structure, which can be directly visualized by high-resolution scanning tunneling microscopy (STM). The rigid structure of the polymers allows the formation of thin films with uniaxially aligned polymer chains by using a simple one-step solution-shear/bar coating technique. These aligned films show a high optical anisotropy with a dichroic ratio of up to a factor of 6. Transport measurements performed using top-gate bottom-contact field-effect transistors exhibit a high saturation electron mobility of 0.2 cm2 V-1 s-1 along the alignment direction, which is more than six times higher than the value reported in the previous work. This work demonstrates that this new class of polymers is able to achieve mobility values comparable to state-of-the-art n-type polymers and identifies an effective processing strategy for this class of rigid-rod polymer system to optimize their charge transport properties.

Fused Pyrazine- and Carbazole-Containing Azaacenes: Synthesis and Properties.

A new family of azaacenes has been designed and synthesized by incorporating the electron-withdrawing sp2 -hybridized nitrogen of pyrazine and electron-donating nitrogen of carbazole in a molecular skeleton. Two different conjugated lengths of 8-ring aza-nonacene and 10-ring aza-undecene have been achieved by an efficient condensation reaction. The unique optoelectronic properties of these molecules were investigated using both experimental and theoretical techniques. The azaacenes show visible-region absorption and near-infrared (NIR) fluorescence. These compounds can serve as hole-transport semiconductors for solution-processed organic field-effect transistors (OFETs). Single-crystal transistor devices of one of the aza-nonacenes exhibit hole charge transport behavior with a hole mobility of 0.07 cm2 /Vs and an on/off current ratio of 1.3x106 .

Synthesis and properties of isoindigo and benzo[1,2-b:4,5-b']bis[b]benzothiophene oligomers.

A well-defined series of long and soluble isoindigo thienoacene oligomers have been synthesized from a novel electron deficient building block: benzo[1,2-b:4,5-b']bis[b]benzothiophene bislactams. Extension of the π-conjugated systems facilitates control of the optical, electronic and device characteristics.