RESUMO
Due to extreme weather events and deforestation the physical and chemical characteristics of watersheds in mountain areas could exceed the known variations. Therefore, the spring water of the Innerste river in the Western Harz Mountains (Germany) was monitored from 2020 to 2023. The monitoring approach is simple and can be directly transferred to other watersheds of springs which are connected to the meteoric water cycle. The specific electrical conductivity (SEC) of the water is compared to daily precipitation data. The SEC values range between 50 and 100 µS/cm. In September 2020 and July 2022 the spring dried out. A hysteretic relationship between spring runoff and spring water mineralisation was found. The SEC values of the spring water are rising during dry periods or in winter seasons with a long ice cover in the catchment area. The highest SEC values are typical for long dry periods and flush events after the drying out of the spring. The relationship of SEC and major ions of the spring water (especially bicarbonate) indicates that biogeochemical processes within the soil zone and water-rock interactions in fractured shales and greywackes of the catchment area control the chemical composition of the spring water. Comparing the obtained results with data measured before the first observed drying out of the spring, no unexpected new values and correlations of runoff, SEC values and ion concentrations were found.
RESUMO
Identification and location of contamination sources is crucial for water resource protection - especially in karst aquifers which provide 25% of the world´s population with water but are highly vulnerable to contamination. Transport-based source tracking is proposed and verified here as a complementary approach to microbial and chemical source tracking in karst aquifers for identifying and locating such sources of contamination and for avoiding ambiguities that might arise from using one method alone. The transport distance is inversely modelled from contaminant breakthrough curves (BTC), based on analytical solutions of the 1D two-region non-equilibrium advection dispersion equation using GNU Octave. Besides the BTC, the model requires reliable estimates of transport velocity and input time. The model is shown to be robust, allows scripted based, automated 2D sensitivity analyses (interplay of two parameters), and can be favourable when distributed numerical models are inappropriate due to insufficient data. Sensitivity analyses illustrate that the model is highly sensitive to the input time, the flow velocity, and the fraction of the mobile fluid region. A conclusive verification approach was performed by applying the method to synthetic data, tracer tests, and event-based field data. Transport distances were correctly modelled for a set of artificial tracer tests using a discharge-velocity relationship that could be established for the respective karst catchment. For the first time such an approach was shown to be applicable to estimate the maximum distance to the contamination source for coliform bacteria in karst spring water combined with microbial source tracking. However, prediction intervals for the transport distance can be large even in well-studied karst catchments mainly related to uncertainties in the flow velocity and the input time. Using a maximum transport distance is proposed to account for less permeable, "slower" pathways. In general, transport-based source tracking might be used wherever transport can be described by the 1D two-region non-equilibrium model, e.g. rivers and fractured or porous aquifers.
RESUMO
The main entry path of veterinary antibiotics to the environment is the application of liquid manure on agricultural land. Along with the manure, they can infiltrate into soils and leach into groundwater. As the environmental behavior of veterinary antibiotics is strongly affected by the process of sorption, the comprehensive knowledge regarding their sorption behavior is key to a reliable risk assessment. However, the flow patterns in field experiments are influenced by several factors that can hardly be distinguished, while most of the sorption studies on veterinary antibiotics were designed without manure or as batch experiments, which means that the effects of manure on the transport behavior of the antibiotic substances remained unaccounted for. In order to understand the results from a previous field experiment and concurrently fill the identified knowledge gap, a column experiment was performed to investigate the effects of manure on the transport of sulfamethazine, sulfadiazine, tetracycline, and lincomycin in soil. Results show that sulfamethazine and sulfadiazine were highly mobile in both the presence and absence of manure, while tetracycline did not appear at the outlet of any column. Despite their high mobility, in the presence of manure the sulfonamides were slightly delayed compared to the conservative tracer as was also seen during the previous field experiment. Lincomycin transport was already delayed in the absence of manure. Furthermore, in the presence of manure, lincomycin was delayed by 4.5 times relative to the tracer, which clearly underlined the influence of manure on the transport of lincomycin and offers an explanation why lincomycin has barely been detected in the long-term field experiment. However, in contrast to the results obtained in the field experiment, the recovery rates were the same in presence and absence of manure for both sulfonamides and lincomycin, probably due to reduced degradation at the applied concentration level.
Assuntos
Esterco , Poluentes do Solo , Antibacterianos , Laboratórios , Solo , Poluentes do Solo/análise , SulfadiazinaRESUMO
Intensive anthropogenic pressure such as high inputs of nutrients and pesticides severely threaten most European water bodies. Small catchments ≤10 km2 are not monitored under the Water Framework Directive but play an important role in freshwater ecosystems. The high complexity in seasonal and spatial dynamics require more than a one-size-fits-all approach in water quality monitoring. Often located in rural areas with a high agricultural activity, small catchments often carry high amounts of nutrients, pesticides and their transformation products affecting drinking water resources. With a low-cost approach of a monthly sampling campaign over the course of one year combined with meaningful indicators for potential pollution sources within the catchment this study could elucidate catchment dynamics and two hotspots for pesticides and nutrients. Two different groups of pesticides were observed (I) pesticides on long-term use which were applied in high amounts over the last decades (e.g., chloridazon and its transformation products) and (II) pesticides on short-term use, newly introduced into the market. Especially transformation products of pesticides from group (I) together with nitrate showed a steady release from two fields into the receiving water bodies over the year, probably being stored in the soil layers over the years of application slowly leaching out. Pesticides from group (II) showed a strong seasonality, released from another hotspot area probably due to run-off shortly after application. Streamlining this knowledge into targeted measures and an agile monitoring strategy for the respective catchments may allow a sustainable improvement of water quality and a better ecosystem protection.
Assuntos
Praguicidas , Poluentes Químicos da Água , Agricultura , Ecossistema , Monitoramento Ambiental , Lagos , Nutrientes , Praguicidas/análise , Estações do Ano , Poluentes Químicos da Água/análiseRESUMO
Lincomycin, an antibiotic commonly used in veterinary medicine, is frequently detected within the agricultural environment. The active compound enters the aquatic environment after manure application via infiltration or surface run-off, where it may negatively affect non-target organisms and contribute to the development and spread of resistant genes. However, a review on the fate of lincomycin within the agricultural and aquatic environment is lacking. Hence, to provide an overview, the main part of this paper summarizes the current literature on the occurrence, effects and behaviour of lincomycin in all relevant environmental compartments, including manure, soil, surface water and groundwater. Lincomycin was regularly detected in all environmental compartments and even in the food chain, appeared to sorb temporarily and mainly in its cationic microspecies, and dissipated after time periods that could cover days, months, or years, depending on the compartment and conditions. As noticed during the literature research conducted, information on the attenuation of lincomycin in terms of biological degradation in the aquatic environment is widely lacking, although it seems that biodegradation is the major removal mechanism. Therefore, a laboratory study, implemented by means of batch experiments, was carried out in order to evaluate the biological degradation of lincomycin in the aquatic environment. First order degradation started after a start-up phase of 10-14 days with a degradation rate constant of 0.55 d-1 and a half-life time of 30 h. Further, the degradation rate constant was found to be independent of initial concentrations as long as concentrations did not exceed a concentration level at which the bacteria were inhibited, as it was the case in this study at a concentration of 10 mg L-1. Biodegradation was confirmed as an important degradation pathway for LIN in the aquatic environment.
Assuntos
Antibacterianos , Lincomicina , Agricultura , Esterco , SoloRESUMO
The purpose of this long-term experiment was on gaining more insights into the environmental behaviour of veterinary antibiotics in the subsurface after application with manure. Therefore, manure spiked with a bromide tracer and eight antibiotics (enrofloxacin, lincomycin, sulfadiazine, sulfamethazine, tetracycline, tiamulin, tilmicosin and tylosin) in concentrations of milligrams per litre were applied at an experimental field site. Their pathway was tracked by continuous extraction of soil pore water at different depths and systematic sampling of groundwater for a period of two years. Seven target compounds were detected in soil pore water of which four leached into groundwater. Concentrations of the detected target compounds were, with few exceptions, in the range of nanograms per litre. It was concluded that a large fraction of the investigated antibiotics sorbed or degraded already within the first meter of the soil. Further, it was inferred from the data that long and warm dry periods cause attenuation of the target compounds through increased degradation or sorption occurring in the soil. In addition, the comprehensive data-set allowed to estimate a retardation factor between 1.1 and 2.0 for sulfamethazine in a Plaggic Anthrosol soil, and to classify the individual compounds by environmental relevance based on transport behaviour and persistence. According to the distribution of resistant genes in the environment, sulfamethazine was found to be the most mobile and persistent substance.
Assuntos
Poluentes do Solo/análise , Drogas Veterinárias , Agricultura , Antibacterianos/análise , Monitoramento Ambiental , Esterco/análise , SoloRESUMO
Eumelanin and pheomelanin are well known and common pigments found in nature. However, their complex polymer structure and high thermostability complicate their direct chemical identification. A widely used analytical method is indirect determination using HPLC with UV detection of both types of melanin by their most abundant oxidation products: pyrrole-2,3-dicarboxylic acid (PDCA), pyrrole-2,3,5-tricarboxylic acid (PTCA), thiazole-4,5-dicarboxylic acid (TDCA), and thiazole-2,4,5-tricarboxylic acid (TTCA). An increasing interest in pigmentation in biological research led us to develop a highly sensitive and selective method to identify and quantify these melanin markers in diverse biological samples with complex matrices. By introducing solid-phase extraction (SPE, reversed-phase) following alkaline oxidation we could significantly decrease background signals while maintaining recoveries greater than 70%. Our HPLC-UV-MS method allows for confident peak identification via exact mass information in corresponding UV signals used for quantitation. In addition to synthetic melanin and Sepia officinalis ink as reference compounds eumelanin markers were detected in brown human hair and a brown bivalve shell (Mytilus edulis). Brown feathers from the common chicken (Gallus g. domesticus) yielded all four eumelanin and pheomelanin markers. The present method can be easily adapted for a wide range of future studies on biological samples with unknown melanin content.
Assuntos
Cromatografia Líquida de Alta Pressão , Espectrometria de Massas , Melaninas/química , Melaninas/isolamento & purificação , Extração em Fase Sólida , Biomarcadores , Cromatografia Líquida de Alta Pressão/métodos , Humanos , Limite de Detecção , Espectrometria de Massas/métodos , Oxirredução , Reprodutibilidade dos Testes , Extração em Fase Sólida/métodosRESUMO
Nowadays, micropollutants such as pharmaceuticals, pesticides and personal care products can be found ubiquitously in the anthropogenically influenced water cycle. As micropollutants have virtually no natural background concentrations they are significantly more sensitive in detecting processes and flow paths than classic inorganic tracers and indicators and at the same time they are often highly source specific. Therefore, using micropollutants as environmental indicators for anthropogenic activities is a common and frequently applied method today. As they interact in many ways with environmental matrices they can be used for source apportionment as well as to estimate flow paths and residence times in waterbodies. This review gives a systematic overview over the large variety of micropollutants used as indicators in the aquatic environment over the last decades together with the prerequisites on their use. Their application is subdivided into their qualitative (compound presence or absence) and quantitative (volume flows) use and shows the numerous possibilities from gaining basic information on the water regime up to advanced applications such as wastewater-based epidemiology.
RESUMO
The suitability of metallic iron (Fe(0)) for water defluoridation is yet to be understood. Fluoride removal ([F-]0â¯=â¯20.0â¯mgâ¯L-1) and Orange II discoloration ([Orange II]0â¯=â¯10.0â¯mgâ¯L-1) by Fe(0)/H2O batch systems are compared herein. A steel wool (SW) and a granular iron (GI) are used as Fe(0) specimens. Each essay tube contains 0.5â¯g sand and 0.1â¯g of the used Fe(0). Investigated systems were: (i) SW/sand at pH 5.0, (ii) GI/sand at pH 5.0 and (iii) SW/sand at pH 8.0. Prior to contaminant addition, Fe(0) was allowed to pre-corrode within the systems for up to 46 days. The systems were then equilibrated for 30 days with a mixture of the two model contaminants. Result confirmed (i) the higher efficiency of SW over GI in removing both contaminants, (ii) the higher efficiency of Fe(0) for Orange II discoloration and (iii) the positive impact of initial low pH values on the efficiency of Fe(0)/H2O systems. The major output of this research is that conventional Fe(0)/H2O systems are not suitable for quantitative water defluoridation. It is suggested that ways to avoid defluoridation using Fe0 must be explored. One affordable opportunity is blending fluoride-polluted water with carefully harvested rainwater.
Assuntos
Ferro/química , Purificação da Água/métodos , Água/químicaRESUMO
Knowledge on the sorption behavior of cationic organic substances in aquatic systems is vital for their risk assessment due to the increasing detection of such chemicals in the hydrosphere. Their sorption behavior is strongly influenced by sorption processes onto mineral surfaces (e.g., oxides, clays). To contribute to the development of prediction tools, the impact of sorbent characteristics on the sorption strength was studied in a highly-idealized model system. In addition to the properties of the solid phase, the concentration of other ions in direct competition for sorption sites and the molecular structure of the sorbate were changed to separate ion exchange and non-ion exchange processes. The study includes in total 120 systematic column experiments using five extensively characterized synthetic oxides (three silica gels, two aluminum oxides), three probe molecules (two structurally related cationic substances, one neutral compound), and four distinctively different NaCl concentrations. The results show that the concentration of OH groups on the sorbent surface is a meaningful descriptor for the observed variations in sorption capacity onto different oxides. Compound-specific linear correlations were obtained, enabling the prediction of sorption coefficients. In addition, a more complex sorption behavior of organic cations compared to uncharged molecules were observed as demonstrated by the sorption results at different electrolyte concentrations. Thus, the study provides an important step towards a better principal mechanistic understanding of organic cation sorption. However, further work using other sorbents including natural ones and other probe molecules is needed to verify the identified relationships within the scope of developing reliable prediction models for cation sorption.
RESUMO
A commercial granular metallic iron (Fe0) specimen was used to evaluate the suitability of Fe0 materials for removing aqueous fluoride (F-) (water defluoridation). Experiments were performed to characterize the defluoridation potential of the tested Fe0 as influenced by the presence of chloride (Cl-) and bicarbonate (HCO3-) ions using tap water (H2O) as operational reference system. Duplicate column studies were conducted for 120 days (4 months) using an initial F- concentration of 22.5â¯mgâ¯L-1, columns flow rates were about 17â¯mLâ¯h-1. Each column contained a reactive layer (11â¯cm) made up of 100â¯g of Fe0 in a 1:1 volumetric Fe0:sand mixture. The reactive layer was sandwiched between two layers of the same sand. A pure sand column was used as control system. After the F- removal experiments, the columns were flushed by methylene blue (MB) and Orange II for 21 days. Removal studies revealed (i) no F- removal in the control system, (ii) no F- significant removal on the Cl- system, (iii) limited F- removal in the HCO3- system, and (iv) the best F- removal efficiency in tap water (H2O). Dye flushing studies confirmed the ion-selective nature of the Fe0/H2O system and demonstrated the relatively low efficiency of the same for F- removal. The overall results challenge the prevailing perception that water defluoridation using granular Fe0 is not possible and suggest that effective water defluoridation in Fe0 packed-beds is pure a site-specific design issue.
Assuntos
Fluoretos/química , Fosfatos/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Água/química , Poluentes Químicos da Água/análiseRESUMO
A reactive barrier that consisted of vegetable compost, iron oxide and clay was installed in an infiltration basin to enhance the removal of emerging organic compounds (EOCs) in the recharge water. First-order degradation rates and retardation factors were jointly estimated for 10 compounds using a multilayer reactive transport model, whose flow and conservative transport parameters were previously estimated using hydraulic head values and conservative tracer tests. Reactive transport parameters were automatically calibrated against the concentration of EOCs measured at nine monitoring points. The degradation rate of each compound was estimated for three zones defined according to the redox state, and retardation coefficients were estimated in two zones defined according to the organic matter content. The fastest degradation rates were obtained for the reactive barrier, and the estimated values were similar to or higher than those estimated in column and/or field experiments for most of the compounds (8/10). Estimated retardation coefficients in the reactive barrier were higher than in the rest of the aquifer in most cases (8/10) and higher than those values estimated in previous studies. Based on the results obtained in this study the reactive barrier seems to be able to enhance the removal of EOCs.
RESUMO
The fundamental understanding of organic cation-solid phase interactions is essential for improved predictions of the transport and ultimate environmental fates of widely used substances (e.g., pharmaceutical compounds) in the aquatic environment. We report sorption experiments of two cationic model compounds using two silica gels and a natural aquifer sediment. The sorbents were extensively characterized and the results of surface titrations under various background electrolyte concentrations were discussed. The salt dependency of sorption was systematically studied in batch experiments over a wide concentration range (five orders of magnitude) of inorganic ions in order to examine the influence of increasing competition on the sorption of organic cations. The organic cation uptake followed the Freundlich isotherm model and the sorption capacity decreases with an increase in the electrolyte concentration due to the underlying cation exchange processes. However, the sorption recovers considerably at high ionic strength (I>1M). To our knowledge, this effect has not been observed before and appears to be independent from the sorbent characteristics and sorbate structure. Furthermore, the recovery of sorption was attributed to specific, non-ionic interactions and a connection between the sorption coefficient and activity coefficient of the medium is presumed. Eventually, the reasons for the differing sorption affinities of both sorbates are discussed.
RESUMO
The ability of lake sediment cores to store long-term anthropogenic pollution establishes them as natural archives. In this study, we focus on the influence of copper shale mining and smelting in the Mansfeld area of Germany, using the depth profiles of two sediment cores from Lake Süßer See. The sediment cores provide a detailed chronological deposition history of polycyclic aromatic hydrocarbons (PAHs) and heavy metals in the studied area. Theisen sludge, a fine-grained residue from copper shale smelting, reaches the lake via deflation by wind or through riverine input; it is assumed to be the main source of pollution. To achieve the comparability of absolute contaminant concentrations, we calculated the influx of contaminants based on the sedimentation rate. Compared to the natural background concentrations, PAHs are significantly more enriched than heavy metals. They are therefore more sensitive and selective for source apportionment. We suggest two diagnostic ratios of PAHs to distinguish between Theisen sludge and its leachate: the ratio fluoranthene to pyrene ~2 and the ratio of PAH with logKOW<5.7 to PAH with a logKOW>5.7 converging to an even lower value than 2.3 (the characteristic of Theisen sludge) to identify the particulate input in lake environments.
Assuntos
Sedimentos Geológicos/análise , Lagos/química , Metalurgia , Metais Pesados/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Poluentes Químicos da Água/análise , Monitoramento Ambiental , AlemanhaRESUMO
Results from coastal water pollution monitoring (Lesvos Island, Greece) are presented. In total, 53 samples were analyzed for 58 polar organic micropollutants such as selected herbicides, biocides, corrosion inhibitors, stimulants, artificial sweeteners, and pharmaceuticals. Main focus is the application of a proposed wastewater indicator quartet (acesulfame, caffeine, valsartan, and valsartan acid) to detect point sources and contamination hot-spots with untreated and treated wastewater. The derived conclusions are compared with the state of knowledge regarding local land use and infrastructure. The artificial sweetener acesulfame and the stimulant caffeine were used as indicators for treated and untreated wastewater, respectively. In case of a contamination with untreated wastewater the concentration ratio of the antihypertensive valsartan and its transformation product valsartan acid was used to further refine the estimation of the residence time of the contamination. The median/maximum concentrations of acesulfame and caffeine were 5.3/178 ng L(-1) and 6.1/522 ng L(-1), respectively. Their detection frequency was 100%. Highest concentrations were detected within the urban area of the capital of the island (Mytilene). The indicator quartet in the gulfs of Gera and Kalloni (two semi-enclosed embayments on the island) demonstrated different concentration patterns. A comparatively higher proportion of untreated wastewater was detected in the gulf of Gera, which is in agreement with data on the wastewater infrastructure. The indicator quality of the micropollutants to detect wastewater was compared with electrical conductivity (EC) data. Due to their anthropogenic nature and low detection limits, the micropollutants are superior to EC regarding both sensitivity and selectivity. The concentrations of atrazine, diuron, and isoproturon did not exceed the annual average of their environmental quality standards (EQS) defined by the European Commission. At two sampling locations irgarol 1051 exceeded its annual average EQS value but not the maximum allowable concentration of 16 ng L(-1).
Assuntos
Água do Mar/análise , Águas Residuárias/química , Poluentes Químicos da Água/análise , Atrazina , Desinfetantes/análise , Diurona , Grécia , Herbicidas/análise , Edulcorantes , Qualidade da ÁguaRESUMO
The identification and differentiation of different sources of contamination are crucial aspects of risk assessment in water resource protection. This is especially challenging in karst environments due to their highly heterogeneous flow fields. We have investigated the use of two artificial sweeteners, cyclamate and acesulfame, as an indicator set for contamination by wastewater within the rural catchment of a karst spring. The catchment was investigated in detail to identify the sources of artificial sweeteners and quantify their impact. Spring water was analysed following two different but typical recharge events: (1) a rain-on-snow event in winter, when no wastewater overflow from the sewer system was observed, and (2) an intense rainfall event in summer triggering an overflow from a stormwater detention basin. Acesulfame, which is known to be persistent, was quantified in all spring water samples. Its concentrations decreased after the winter event with no associated wastewater spillage but increased during the summer event following a recent input of untreated wastewater. Cyclamate, which is known to be degradable, was only detected following the wastewater inflow incident. The cyclamate signal matched very well the breakthrough of faecal indicator bacteria, indicating a common origin. Knowing the input function, cyclamate was used quantitatively as a tracer in transport modelling and the impact of 'combined sewer overflow' on spring water quality was quantified. Signals from artificial sweeteners were compared to those from bulk parameters (discharge, electrical conductivity and turbidity) and also to those from the herbicides atrazine and isoproturon, which indicate 'old' and 'fresh' flow components, respectively, both originating from croplands. High concentration levels of the artificial sweeteners in untreated wastewater (cyclamate and acesulfame) and in treated wastewater (acesulfame only) make them powerful indicators, especially in rural settings where wastewater input is relatively low, and in karst systems where dilution is often high.
Assuntos
Ciclamatos/análise , Monitoramento Ambiental/métodos , Água Subterrânea/química , Tiazinas/análise , Poluentes Químicos da Água/análise , Chuva , Estações do Ano , Edulcorantes/análise , Águas Residuárias/análiseRESUMO
Benzotriazole (BTR) and benzothiazole (BTH) derivatives have been acknowledged as emerging pollutants due to their widespread contamination in the environment and their adverse effects on aquatic organisms. A rapid and reliable analytical method, based on solid phase extraction (SPE) and large-volume injection, derivatized with N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA), and analyzed by gas chromatographymass spectrometry (GCMS), was developed for the determination of six 1,2,3-benzotriazoles and six 1,3-benzothiazoles in aquatic matrices. It was demonstrated that MTBSTFA had a better overall performance compared with N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) and N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA). The method detection limits in tap water, river water and effluent samples were 0.0501.3 ng L(−1), 0.0571.8 ng L(−1) and 0.104.0 ng L(−1), respectively. Mean recoveries of the target analytes at different aquatic matrices, ranged from 43% to 131% with relative standard deviations (RSDs) below 17%. The method was successfully employed to river water and effluent sewage samples collected from a sewage treatment plant in Germany. Seven target compounds were detected with the maximum concentration up to 2.9 µg L(−1) for 4-Me-BTR in the effluent sample.
Assuntos
Benzotiazóis/análise , Técnicas de Química Analítica/métodos , Cromatografia Gasosa-Espectrometria de Massas , Triazóis/análise , Água/química , Alemanha , Limite de Detecção , Esgotos/química , Extração em Fase Sólida , Poluentes Químicos da Água/análiseRESUMO
A detailed electrochemical, photophysical and theoretical study is presented for various new thienyl and furyl derivatives of pyrene. Their optical properties are described based on UV-VIS absorption and both steady-state and time-resolved fluorescence spectroscopy. DFT and TDDFT calculations are also presented to support experimental data. The calculations results show that HOMO-LUMO orbitals are delocalized uniformly between aromatic core and aryl substituents. Good electrochemical stability of thienyl and furyl hybrids of pyrene confirm their potential application for light emitting electrochemical cells or spintronics mainly due to their beneficial optical and charge transport properties in electrochromic devices. In order to demonstrate this potential, an OLED device is presented. Synthesized compounds included in this OLED device both facilitate electron transport and act as a light emitting layer.
RESUMO
Karst aquifers are known to be highly vulnerable to contamination due to their particular hydraulic characteristics. A number of parameters (such as turbidity, dissolved organic matter concentration, particle size distribution) have been proposed as proxies that can be used to detect changes in water quality or contamination of karst springs. However, most of these are not very specific concerning the source of any contamination. Organic micropollutants (OMPs) such as artificial sweeteners or herbicides are possible source-specific indicators that can be used in karst catchment areas, but real time monitoring is not as yet possible for these compounds. We have investigated the possibility of combining the source-specific features of OMPs with real-time measurements of electrical conductivity (EC) and turbidity by means of ECturbidity hysteresis plots. These plots allow for identifying different hydro-sedimentary processes. Our investigations were carried out at the Gallusquelle karst spring in south-west Germany, during high flow conditions that occurred in 2013 after heavy precipitation. The herbicide atrazine, which derives from the aquifer matrix, was detectable in the spring water until resuspended particles appeared at the spring. The herbicide metazachlor, which is present in recharge from cropland, was found to be associated with periods of direct transfer of particles originating from the land surface. The artificial sweetener cyclamate was used as a wastewater indicator, but neither hysteresis plots of EC and turbidity nor any other real-time parameters were able to detect the presence of cyclamate following a wastewater spill. Since EC and turbidity are easily measurable parameters, the systematic relationships of ECturbidity hysteresis behavior to OMPs might assist in the sustainable management of raw water within karst catchments.
Assuntos
Monitoramento Ambiental , Água Subterrânea/química , Poluentes Químicos da Água/análise , Atrazina/análise , Alemanha , Herbicidas/análise , Movimentos da ÁguaRESUMO
The pH-dependent molecule speciation (charge state) in solution strongly influences the transport of ionizable organic compounds in the aquatic environment. Therefore, the sorption behavior is complex and reliable predictions only based on physico-chemical sorbate, sorbent and solution properties are challenging. A short overview of underlying sorption processes causing retardation during the solute transport in aquifers is completed by a description of approaches for estimating respective sorption coefficients/retardation factors and discussed together with their limitations. Based on these initial considerations, a systematic framework is proposed, which allows the assessment of transport properties of organic molecule species by their chemical nature (neutral, acidic, basic, ampholytic). As a result, the transport properties of many (ionizable) organic molecules of interest can be assessed and even first presumptions for the sorption behavior of new and not yet investigated molecules can be derived.