Construction of greenly biodegradable bacterial cellulose/UiO-66-NH2 composite separators for efficient enhancing performance of lithium-ion battery.

The disposal of waste lithium batteries, especially waste separators, has always been a problem, incineration and burial will cause environmental pollution, therefore, the development of degradable and high-performance separators has become an important challenge. Herein, UiO-66-NH2 particles were successfully anchored onto bacterial cellulose (BC) separators by epichlorohydrin (ECH) as a crosslinker, then a BC/UiO-66-NH2 composite separator was prepared by vacuum filtration. The ammonia groups (-NH2) from UiO-66-NH2 can form hydrogen bonds with PF6- in the electrolyte, promoting lithium-ion transference. Additionally, UiO-66-NH2 can store the electrolyte and tune the porosity of the separator. The lithium ion migration number (0.62) of the battery assembled with BC/UiO-66-NH2 composite separator increased by 50 % compared to the battery assembled with commercial PP separator (0.45). The discharge specific capacity of the battery assembled with BC/UIO-66-NH2 composite separator after 50 charge and discharge cycles is 145.4 mAh/g, which is higher than the average discharge specific capacity of 114.3 mAh/g of the battery assembled with PP separator. When the current density is 2C, the minimum discharge capacity of the battery assembled with BC/UiO-66-NH2 composite separator is 85.3 mAh/g. The electrochemical performance of the BC/UiO-66-NH2 composite separator is significantly better than that of the commercial PP separator. In addition, -NH2 can offer a nitrogen source to facilitate degradation of the BC separators, whereby the BC/UiO-66-NH2 composite separator could be completely degraded in 15 days.

Functional polymeric molecules for performing autonomous synthesis of particles with core-shell structures and customizable shapes.

Self-organization by the directed migration of components within a system is an important process in many applications, such as the unidirectional migration of motor proteins for transporting items to specific sites in a cell. This manuscript describes a class of functional polymeric molecules that have a set of instructions written by specific chemical moieties. These instructions allow the functional polymeric molecules to be used for autonomous synthesis of particles: particles with both functional core-shell structure and customizable shapes are fabricated for the first time. The functional polymeric molecules direct the large-scale migration of the liquid molecules to specific sites for forming the required customized structure of the particle, thus overcoming previous challenges of fabricating this class of particles. This first synthesis of this class of particles enables the development of novel applications: the concept of shape specificity for targeting sites. Both the basic structural properties (core-shell structure and customizable shape) are used in the specific applications of targeted drug delivery and imaging. The secure physical fit due to the complementary shapes enables the particles to remain locked in position for the targeting. Polymeric molecules are first shown to be highly capable of being encoded with instructions for autonomous synthesis of structured materials.

Hierarchical Hollow Carbon Particles with Encapsulation of Carbon Nanotubes for High Performance Supercapacitors.

A novel and sustainable carbon-based material, referred to as hollow porous carbon particles encapsulating multi-wall carbon nanotubes (MWCNTs) (CNTs@HPC), is synthesized for use in supercapacitors. The synthesis process involves utilizing LTA zeolite as a rigid template and dopamine hydrochloride (DA) as the carbon source, along with catalytic decomposition of methane (CDM) to simultaneously produce MWCNTs and COx -free H2 . The findings reveal a distinctive hierarchical porous structure, comprising macropores, mesopores, and micropores, resulting in a total specific surface area (SSA) of 913 m2  g-1 . The optimal CNTs@HPC demonstrates a specific capacitance of 306 F g-1 at a current density of 1 A g-1 . Moreover, this material demonstrates an electric double-layer capacitor (EDLC) that surpasses conventional capabilities by exhibiting additional pseudocapacitance characteristics. These properties are attributed to redox reactions facilitated by the increased charge density resulting from the attraction of ions to nickel oxides, which is made possible by the material's enhanced hydrophilicity. The heightened hydrophilicity can be attributed to the presence of residual silicon-aluminum elements in CNTs@HPC, a direct outcome of the unique synthesis approach involving nickel phyllosilicate in CDM. As a result of this synthesis strategy, the material possesses excellent conductivity, enabling rapid transportation of electrolyte ions and delivering outstanding capacitive performance.

Porous Host-Guest MOF-Semiconductor Hybrid with Multisites Heterojunctions and Modulable Electronic Band for Selective Photocatalytic CO2 Conversion and H2 Evolution.

Optimizing catalysts for competitive photocatalytic reactions demand individually tailored band structure as well as intertwined interactions of light absorption, reaction activity, mass, and charge transport.  Here, a nanoparticulate host-guest structure is rationally designed that can exclusively fulfil and ideally control the aforestated uncompromising requisites for catalytic reactions. The all-inclusive model catalyst consists of porous Co3 O4 host and Znx Cd1- x S guest with controllable physicochemical properties enabled by self-assembled hybrid structure and continuously amenable band gap. The effective porous topology nanoassembly, both at the exterior and the interior pores of a porous metal-organic framework (MOF), maximizes spatially immobilized semiconductor nanoparticles toward high utilization of particulate heterojunctions for vital charge and reactant transfer. In conjunction, the zinc constituent band engineering is found to regulate the light/molecules absorption, band structure, and specific reaction intermediates energy to attain high photocatalytic CO2 reduction selectivity. The optimal catalyst exhibits a H2 -generation rate up to 6720 µmol g-1 h-1 and a CO production rate of 19.3 µmol g-1 h-1 . These findings provide insight into the design of discrete host-guest MOF-semiconductor hybrid system with readily modulated band structures and well-constructed heterojunctions for selective solar-to-chemical conversion.

Ni nanoparticles supported on Al2O3 + La2O3 yolk-shell catalyst for photo-assisted thermal decomposition of methane.

Catalytic methane decomposition (CMD) has emerged as an appealing technology for large-scale production of H2 and carbon nanostructures from natural gas. As the CMD process is mildly endothermic, the application of concentrated renewable energy sources such as solar energy under a low-temperature regime could potentially represent a promising approach towards CMD process operation. Herein, Ni/Al2O3-La2O3 yolk-shell catalysts are fabricated using a straightforward single-step hydrothermal approach and tested for their performance in photothermal CMD. We show that the morphology of the resulting materials, dispersion and reducibility of Ni nanoparticles, and nature of metal-support interactions can be tuned by addition of varying amounts of La. Notably, the addition of an optimal amount of La (Ni/Al-20La) improved the H2 yield and catalyst stability relative to the base Ni/Al2O3 material, while also favoring base growth of carbon nanofibers. Additionally, we show for the first time a photothermal effect in CMD, whereby the introduction of 3 suns light irradiation at a constant bulk temperature of 500 °C reversibly increased the H2 yield of catalyst by about 1.2 times relative to the rate in the dark, accompanied by a decrease in apparent activation energy from 41.6 kJ mol-1 to 32.5 kJ mol-1. The light irradiation further suppressed undesirable CO co-production at low temperatures. Our work reveals photothermal catalysis as a promising route for CMD while providing an insightful understanding of the roles of modifier in enriching methane activation sites on Al2O3-based catalysts.

Genesis of Active Pt/CeO2 Catalyst for Dry Reforming of Methane by Reduction and Aggregation of Isolated Platinum Atoms into Clusters.

Atomically dispersed metal catalysts offer the advantages of efficient metal utilization and high selectivities for reactions of technological importance. Such catalysts have been suggested to be strong candidates for dry reforming of methane (DRM), offering prospects of high selectivity for synthesis gas without coke formation, which requires ensembles of metal sites and is a challenge to overcome in DRM catalysis. However, investigations of the structures of isolated metal sites on metal oxide supports under DRM conditions are lacking, and the catalytically active sites remain undetermined. Data characterizing the DRM reaction-driven structural evolution of a cerium oxide-supported catalyst, initially incorporating atomically dispersed platinum, and the corresponding changes in catalyst performance are reported. X-ray absorption and infrared spectra show that the reduction and agglomeration of isolated cationic platinum atoms to form small platinum clusters/nanoparticles are necessary for DRM activity. Density functional theory calculations of the energy barriers for methane dissociation on atomically dispersed platinum and on platinum clusters support these observations. The results emphasize the need for in-operando experiments to assess the active sites in such catalysts. The inferences about the catalytically active species are suggested to pertain to a broad class of catalytic conversions involving the rate-limiting dissociation of light alkanes.

Halogen-Incorporated Sn Catalysts for Selective Electrochemical CO2 Reduction to Formate.

Electrochemically reducing CO2 to valuable fuels or feedstocks is recognized as a promising strategy to simultaneously tackle the crises of fossil fuel shortage and carbon emission. Sn-based catalysts have been widely studied for electrochemical CO2 reduction reaction (CO2 RR) to make formic acid/formate, which unfortunately still suffer from low activity, selectivity and stability. In this work, halogen (F, Cl, Br or I) was introduced into the Sn catalyst by a facile hydrolysis method. The presence of halogen was confirmed by a collection of ex situ and in situ characterizations, which rendered a more positive valence state of Sn in halogen-incorporated Sn catalyst as compared to unmodified Sn under cathodic potentials in CO2 RR and therefore tuned the adsorption strength of the key intermediate (*OCHO) toward formate formation. As a result, the halogen-incorporated Sn catalyst exhibited greatly enhanced catalytic performance in electrochemical CO2 RR to produce formate.

Charging Organic Liquids by Static Charge.

Aqueous liquids can be charged effectively by a number of methods for many important applications. Organic liquids, however, cannot be charged effectively by existing methods due to their low conductivities, especially the insulating nonpolar organic liquids; hence, there has not been any significant application developed based on charged organic liquids. This study describes an effective fundamental strategy for charging organic liquids, including nonpolar organic liquids: static charge is simply mixed into the liquid. Analyses suggested that the charged species are molecular ions that reside in the bulk of the liquid after charging. This method is simple and general, and the amount and polarity of charge can be flexibly tunable. The effectiveness of this method gives rise to opportunities for the development of novel applications. Charged organic droplets are manipulated for the first time by an electric field for controlling organic reactions. Particles with charge embedded in their bulk matrices are fabricated for the first time (i.e., via polymerizing the liquid monomers mixed with static charge). The charge in this novel class of bulk-charged particles is stable and permanent, especially when compared to the typical surface-charged particles. Simultaneous bulk-charged and bulk-magnetic particles are fabricated for the first time via simply mixing both the static charge and magnetic nanoparticles into the liquid monomers. These highly versatile particles are responsive to both electric and magnetic fields for practical applications.

The Pathway to Intelligence: Using Stimuli-Responsive Materials as Building Blocks for Constructing Smart and Functional Systems.

Systems that are intelligent have the ability to sense their surroundings, analyze, and respond accordingly. In nature, many biological systems are considered intelligent (e.g., humans, animals, and cells). For man-made systems, artificial intelligence is achieved by massively sophisticated electronic machines (e.g., computers and robots operated by advanced algorithms). On the other hand, freestanding materials (i.e., not tethered to a power supply) are usually passive and static. Hence, herein, the question is asked: can materials be fabricated so that they are intelligent? One promising approach is to use stimuli-responsive materials; these "smart" materials use the energy supplied by a stimulus available from the surrounding for performing a corresponding action. After decades of research, many interesting stimuli-responsive materials that can sense and perform smart functions have been developed. Classes of functions discussed include practical functions (e.g., targeting and motion), regulatory functions (e.g., self-regulation and amplification), and analytical processing functions (e.g., memory and computing). The pathway toward creating truly intelligent materials can involve incorporating a combination of these different types of functions into a single integrated system by using stimuli-responsive materials as the basic building blocks.