Influence of seasonality on the physicochemical properties of Moringa oleifera Lam. Seed oil and their oleochemical potential.

The effect of abiotic factors, such as weather and climate can alter the properties of vegetable oils. In this work, the effects of the refining process and pre-drying of Moringa oleifera Lam. seeds collected in the dry and rainy seasons (seasonality) were evaluated on the characteristics of the extracted oils. The refined and crude dry season oils had lower acidity and moisture content than the dry and raw rainy season oils. Oleic acid (C18:1) showed the highest concentration in the different Moringa oils studied. The results suggest that dry season oils are more suitable for application as feedstocks in the cosmetic, food, medicinal and pharmaceutical industries. Furthermore, refining proved to be efficient in removing free fatty acids and in lightening the oil.

Analysis of the occurrence of microplastics in beach sand on the Brazilian coast.

The occurrence of microplastics in coastal areas is a growing concern due to the increase in plastic waste pollution in recent decades. This study had as objective to evaluate the occurrence of microplastics in Brazilian beach sand, using a simple and fast methodology. In addition, possible microplastics were classified according to color, shape and chemical composition. The study was conducted on six beaches on the Brazilian coast: Pecado Beach (RJ), Castanheiras Beach (ES), Regência Beach (ES), Imbassaí Beach (BA), Viral Beach (SE) and Ponta dos Mangues Beach (SE). The methodology was adapted from international protocols, with section demarcation (100 m), where samples were collected from the superficial layer of the beach sand in ten quadrants (50 cm × 50 cm). The laboratory extraction procedure consisted of the density separation technique in two stages: the first used sodium chloride solution and the second used zinc chloride solution. For the visual inspection and screening procedures, a stereoscopic microscope was used. A total of 166 items of microplastics were collected on the six beaches on the Brazilian coast under study. The largest quantity of possible microplastics was recorded on the beaches of Viral (SE) and Ponta dos Mangues (SE) with 30.4 items/m2 and 17.4 items/m2, respectively. Regarding colour, white items were predominant (49.3%), and among particle types, fragments represented 85.1%. In addition, some microplastic particles were sent for FT-IR analysis, one of which was identified as being polyethylene. This study contributes to the knowledge of the presence of microplastics in different locations, and to supporting decision makers regarding coastal management.

Development of an ethanolic two-phase system (ETPS) based on polypropylene glycol 2000 + ethylene glycol + ethanol for separation of hydrophobic compounds.

This work reports, for the first time, an Ethanolic Two-Phase System (ETPS) based on polypropylene glycol 2000 (PPG 2000), mono-, di-, tri-ethylene glycol, and ethanol. An ionic liquid (IL) (1-butyl-3-methylpyridinium chloride) was used as an adjuvant. This ETPS shows promising results for the extraction of highly hydrophobic compounds. Bixin (model of hydrophobic compounds) migrates completely to the PPG 2000-rich phase, while ascorbic acid (hydrophilic compound) migrated to the opposite phase.

In Silico Evaluation of Enzymatic Tunnels in the Biotransformation of α-Tocopherol Esters.

Motivation: α-Tocopherol is a molecule obtained primarily from plant sources that are important for the pharmaceutical and cosmetics industry. However, this component has some limitations such as sensitivity to oxygen, presence of light, and high temperatures. For this molecule to become more widely used, it is important to carry out a structural modification so that there is better stability and thus it can carry out its activities. To carry out this structural modification, some modifications are carried out, including the application of biotransformation using enzymes as biocatalysts. Thus, the application of a computational tool that helps in understanding the transport mechanisms of molecules in the tunnels present in the enzymatic structures is of fundamental importance because it promotes a computational screening facilitating bench applications. Objective: The aim of this work was to perform a computational analysis of the biotransformation of α-tocopherol into tocopherol esters, observing the tunnels present in the enzymatic structures as well as the energies which correspond to the transport of molecules. Method: To carry out this work, 9 lipases from different organisms were selected; their structures were analyzed by identifying the tunnels (quantity, conformation, and possibility of transport) and later the calculations of substrate transport for the biotransformation reaction in the identified tunnels were carried out. Additionally, the transport of the product obtained in the reaction through the tunnels was also carried out. Results: In this work, the quantity of existing tunnels in the morphological conformational characteristics in the lipases was verified. Thus, the enzymes with fewer tunnels were RML (3 tunnels), LBC and RNL (4 tunnels), PBLL (5 tunnels), CALB (6 tunnels), HLG (7 tunnels), and LCR and LTL (8 tunnels) and followed by the enzyme LPP with the largest number of tunnels (39 tunnels). However, the enzyme that was most likely to transport substrates in terms of α-tocopherol biotransformation (in relation to the Emax and Ea energies of ligands and products) was CALB, as it obtains conformational and transport characteristics of molecules with a particularity. The most conditions of transport analysis were α-tocopherol tunnel 3 (Emax: -4.6 kcal/mol; Ea: 1.1 kcal/mol), vinyl acetate tunnel 1 (Emax: -2.4 kcal/mol; Ea: 0.1 kcal/mol), and tocopherol acetate tunnel 2 (Emax: -3.7 kcal/mol; Ea: 2 kcal/mol).

Oleochemistry potential from Brazil northeastern exotic plants.

Caatinga is a Brazilian semi-arid ecosystem that stands out for presenting unique environmental characteristics with a dry, spiny and deciduous shrub/forest vegetation with several species that can be renewable oil sources with potential applicability in oleochemical and nutrition. Caatinga oilseeds have a high content of unsaturated fatty acids, phytosterols and sterols, and this composition is related to its nutritional potential. The present review summarizes the knowledge on the oil contents and fatty acid profiles of seeds from six representatives caatinga species. It was observed that plants species like Caju (Anacardium occidentale L.), Favela (Cnidoscolus quercifolius Pohl), Licuri (Syagrus coronata (Mart.) Becc.), Pinhão-bravo (Jatropha mollissima Pohl Baill), Pequi (Caryocar brasiliense Camb) and Oiticica (Licania rígida Benth) contains approximately 33.1, 33.5, 49.2, 18.3, 70.16 and 57.0% w/w of oil, respectively, on a dry weight basis. Their fatty acid profiles are mostly saturated for Licuri oil, with a high content of lauric acid (up to 40%) and unsaturated for Favela, Pinhão-bravo, Cashew nut, Pequi and Oiticica oils. Oiticica oil shows a high concentration of unusual conjugated polyunsaturated fatty acids, like α-Eleostearic and Licanic acid with 16.90 and 43.20% w/w, respectively.

Sequential degradation of raw vinasse by a laccase enzyme producing fungus Pleurotus sajor-caju and its ATPS purification.

This study evaluated simultaneously the raw vinasse degradation, an effluent from the sugar-alcohol industry, the laccase production by Pleurotus sajor-caju and its purification using aqueous two-phase systems (ATPS). To improve laccase production, different concentrations of inducers (ethanol and CuSO4) were added. The higher laccase production promoted an increase of 4-fold using 0.4 mM of CuSO4 as inducer, with maximum enzymatic activity of 539.3 U/L on the 3rd day of fermentation. The final treated vinasse had a decolorization of 92% and turbidity removal of 99% using CuSO4. Moreover, the produced laccase was then purified by ATPS in a single purification step, reaching 2.9-fold and recovered ≈ 99,9 %, in the top phase (PEG-rich phase) using 12 wt% of PEG 1500 + 20 wt% of citrate buffer + enzyme broth + water, at 25 °C. Thus, an integrated process of vinasse degradation, laccase production and purification with potential industrial application was proposed.

Real textile effluents treatment using coagulation/flocculation followed by electrochemical oxidation process and ecotoxicological assessment.

As it is well known, the textile industry generates a large amount of wastewater with varied composition that need to be treated. In particular, the Sergipe state, in Brazil, is a region that requires attention due the presence of several local textile industries. In this study, the efficiency of electrochemical oxidation (EO) process applied in the samples of Brazilian textile industry effluents previously treated by physical-chemical process coagulation-flocculation (CF) was evaluated by the reduction in TOC parameter and by the ecotoxicity using Lactuca sativa and Raphidocelis subcapitata bioassays. The optimized experiments achieved for the CF ([Al2(SO4)3]0 = 1.5 mg L-1, pH = 6.0, alkalinity = 0.675 mg L-1, [flocculating agent] = 61 mg L-1, rapid mixing = 100 rpm for 1 min, slow stage = 20-60 rpm for 20 min) a reduction of 20% on TOC. The best results obtained for EO was using the DSA electrode (I = 300 mA) reaching a TOC removal efficiency of 82% after an electrolysis time of 180 min. The ecotoxicity experiments indicated that the proposed treatment (CF + EO, I = 300 mA) was effective to decrease the dissolved pollutants presented in the treated samples. In comparison with raw samples, the treatment achieved a reduction of 52% for IC5072h value using R. subcapitata as bioindicator, and a 98% reduction of LC50 (Lactuca sativa).

Liquid-Liquid extraction of phenolic compounds in systems based on acetonitrile + water + polyvinylpyrrolidone at 298.15 K.

This paper contains data related to the research paper entitled "Organic two-phase system based on acetonitrile + water + polyvinylpyrrolidone, a novel concept of liquid-liquid equilibrium: phase diagrams and phenolic compounds partitioning". Data of phase equilibrium were obtained using the cloud point method. After this step, some blending points were chosen to perform the phenolic compounds partitioning (gallic acid, quercetin dihydrate and cyanidin 3-O-glucoside chloride).

Aplicação de índices para avaliação da qualidade da água da Bacia Costeira do Sapucaia em Sergipe / Application of indexes to assess the water quality of coastal basin of the Sapucaia in Sergipe

RESUMO A redução da disponibilidade qualiquantitativa da água no mundo está diretamente relacionada às formas de uso e ocupação do solo, aos processos produtivos da agricultura e da pecuária, ao processo de urbanização e à geração de efluentes domésticos e industriais. Por isso, é importante a realização de diagnósticos de bacias hidrográficas, sobre o uso e a ocupação de seu solo e sobre a qualidade da água como ferramenta para a gestão hídrica. Este estudo teve como objetivo caracterizar e monitorar a qualidade da água da Bacia Costeira do Sapucaia, Sergipe. As coletas foram realizadas em oito pontos, com periodicidade trimestral, de agosto de 2014 a setembro de 2015. Na avaliação da qualidade da água foram utilizados: o Índice de Qualidade da Água (IQA) e o Índice de Estado Trófico (IET). As análises das amostras foram realizadas de acordo com os procedimentos estabelecidos no Standard Methods, sendo analisados os seguintes parâmetros: coliformes totais e termotolerantes, turbidez, pH, oxigênio dissolvido, sólidos totais, fósforo total, nitrogênio total, temperatura, condutividade, demanda bioquímica de oxigênio e clorofila. Os resultados do IQA classificam os corpos d'água em aceitável (2,5%), bom (92,5%) e ótimo (5,0%). Os resultados do IET classificaram as amostras como: ultraoligotrófico (67,5%), oligotrófico (20,0%), mesotrófico (2,5%), eutrófico (7,5%) e supereutrófico (2,5%). Os resultados obtidos permitem afirmar que os rios Aningas, Sapucaia e a Lagoa Redonda apresentam baixo grau de degradação, com menor conservação do ponto amostral localizado no Rio Sapucaia, dentro da Reserva Santa Isabel, por ser uma área bastante visitada nos finais de semana e feriados.

ABSTRACT The reduction of quali-quantitative availability of water in the world is directly related to the forms of land use and occupation, the productive processes of agriculture and cattle raising, the process of urbanization and the generation of domestic and industrial effluents. Thus, it is important to evaluate hydrographic basins regarding the use and occupation of their land and water quality as a tool for water management. This study aimed to characterize and monitor the quality of water of the Sapucaia Coastal Basin in the state of Sergipe, Brazil. The collections were performed quarterly in eight points of the basin, from August 2014 to September 2015. In the assessment of water quality, the Water Quality Index (WQI) and the Trophic State Index (TSI) were used. The analyzes of the samples were carried out according to the procedures outlined in Standard Methods; the following parameters were analyzed: total and fecal coliforms, turbidity, pH, dissolved oxygen, total solids, total phosphorus, total nitrogen, temperature, conductivity, biochemical oxygen demand and chlorophyll. The results from the application of the WQI classified water bodies as acceptable (2.5%), good (92.5%) and very good (5.0%). The results of the TSI ranked the samples as ultraoligotrophic (67.5%), oligotrophic (20.0%), mesotrophic (2.5%), eutrophic (7.5%) and supereutrophic (2.5%). The results allow to affirm that Aningas and Sapucaia rivers and Lagoa Redonda pond, belonging to the Sapucaia Coastal Basin, in Sergipe, have a low degree of degradation, with lower conservation of the sample point located in Sapucaia river, within the Reserva Santa Isabel reserve, that being a widely visited area on weekends and holidays.

New strategy to apply perfluorodecalin as an oxygen carrier in lipase production: minimisation and reuse.

A novel strategy for the production of lipase by Bacillus sp. ITP-001 in a stirred tank fermenter using perfluorodecalin (PFD) was studied. Firstly, a response surface methodology 2(2) with three central points was employed to optimise the effect of agitation speed and aeration rate in lipase production. According to the response from the experimental designs, 300 rpm (revolutions per minute) and 0.5 vvm (air volume/liquid volume per minute) were found to provide the best condition (lipolytic activity: LA = 3,140.76 U mL(-1)). Then, the influence of PFD concentration on the fermentation process was evaluated. Incorporation of PFD at all concentrations above 1% had no statistically significant influence on lipase production, that is, the previous optimisation allowed the reduction of the amount of PFD added besides increasing lipase production. Furthermore, PFD could be used in three sequential fermentations without altering the statistical production of lipase, reducing by 67% the cost of PFD addition.

Encapsulation in a sol-gel matrix of lipase from Aspergillus niger obtained by bioconversion of a novel agricultural residue.

Lipase from Aspergillus niger was obtained from the solid-state fermentation of a novel agroindustrial residue, pumpkin seed flour. The partially purified enzyme was encapsulated in a sol-gel matrix, resulting in an immobilization yield of 71.4 %. The optimum pH levels of the free and encapsulated enzymes were 4.0 and 3.0, respectively. The encapsulated enzyme showed greater thermal stability at temperatures of 45 and 60 °C than the free enzyme. The positive influence of the encapsulation process was observed on the thermal stability of the enzyme, since a longer half-life t 1/2 and lower deactivation constant were obtained with the encapsulated lipase when compared with the free lipase. Kinetic parameters were found to follow the Michaelis-Menten equation. The K m values indicated that the encapsulation process reduced enzyme-substrate affinity and the V max was about 31.3 % lower than that obtained with the free lipase. The operational stability was investigated, showing 50 % relative activity up to six cycles of reuse at pH 3.0 at 37 °C. Nevertheless, the production of lipase from agroindustrial residue associated with an efficient immobilization method, which promotes good catalytic properties of the enzyme, makes the process economically viable for future industrial applications.

Aqueous Two-Phase Systems formed by Biocompatible and Biodegradable Polysaccharides and Acetonitrile.

In this work, it is shown that novel aqueous two-phase systems can be formed by the combination of acetonitrile and polysaccharides, namely dextran. Several ternary phase diagrams were determined at 25 °C for the systems composed of water + acetonitrile + dextran. The effect of the dextran molecular weight (6,000, 40,000 and 100,000 g.mol-1) was ascertained toward their ability to undergo liquid-liquid demixing. An increase in the dextran molecular weight favors the phase separation. Furthermore, the effect of temperature (25, 35 and 45 °C) was evaluated for the system constituted by the dextran of higher molecular weight. Lower temperatures are favorable for phase separation since lower amounts of dextran and acetonitrile are required for the creation of aqueous two-phase systems. In general, acetonitrile is enriched in the top phase while dextran is majorly concentrated in the bottom phase. The applicability of this new type of two-phase systems as liquid-liquid extraction approaches was also evaluated by the study of the partition behavior of a well-known antioxidant - vanillin - and used here as a model biomolecule. The optimized conditions led to an extraction efficiency of vanillin of 95% at the acetonitrile-rich phase.

Schistosomiasis mansoni in urban Northeast Brazil: influence of rainfall regime on the population dynamics of Biomphalaria sp.

INTRODUCTION: Our objective was to evaluate the influence of rainfall regime on the population dynamics of Biomphalaria in a potential urban focus of schistosomiasis in Aracaju, Brazil, during 2009-2010. METHODS: Snails were collected monthly and were counted, measured and identified; the level of infection and fecal contamination at the sampling sites was determined; rainfall data were obtained. RESULTS: High levels of fecal contamination were observed, and the abundance of Biomphalaria glabrata increased during the rainy and post-rainy seasons. The snails' size was variable, and infected snails were identified independently of rainfall. CONCLUSIONS: These results provide evidence of anthropogenic and climate interference in an urban focus of schistosomiasis in the Aracaju metropolitan area.

Schistosomiasis mansoni in urban Northeast Brazil: influence of rainfall regime on the population dynamics of Biomphalaria sp.

Introduction Our objective was to evaluate the influence of rainfall regime on the population dynamics of Biomphalaria in a potential urban focus of schistosomiasis in Aracaju, Brazil, during 2009-2010. Methods Snails were collected monthly and were counted, measured and identified; the level of infection and fecal contamination at the sampling sites was determined; rainfall data were obtained. Results High levels of fecal contamination were observed, and the abundance of Biomphalaria glabrata increased during the rainy and post-rainy seasons. The snails' size was variable, and infected snails were identified independently of rainfall. Conclusions These results provide evidence of anthropogenic and climate interference in an urban focus of schistosomiasis in the Aracaju metropolitan area. .

Protic ionic liquid as additive on lipase immobilization using silica sol-gel.

Ionic liquids (ILs) have evolved as a new type of non-aqueous solvents for biocatalysis, mainly due to their unique and tunable physical properties. A number of recent review papers have described a variety of enzymatic reactions conducted in IL solutions, on the other hand, to improve the enzyme's activity and stability in ILs; major methods being explored include the enzyme immobilization (on solid support, sol-gel, etc.), protic ionic liquids used as an additive process. The immobilization of the lipase from Burkholderia cepacia by the sol-gel technique using protic ionic liquids (PIL) as additives to protect against inactivation of the lipase due to release of alcohol and shrinkage of the gel during the sol-gel process was investigated in this study. The influence of various factors such as the length of the alkyl chain of protic ionic liquids (monoethanolamine-based) and a concentration range between 0.5 and 3.0% (w/v) were evaluated. The resulting hydrophobic matrices and immobilized lipases were characterised with regard to specific surface area, adsorption-desorption isotherms, pore volume (V(p)) and size (d(p)) according to nitrogen adsorption and scanning electron microscopy (SEM), physico-chemical properties (thermogravimetric - TG, differential scanning calorimetry - DSC and Fourier transform infrared spectroscopy - FTIR) and the potential for ethyl ester and emulsifier production. The total activity yields (Y(a)) for matrices of immobilized lipase employing protic ionic liquids as additives always resulted in higher values compared with the sample absent the protic ionic liquids, which represents 35-fold increase in recovery of enzymatic activity using the more hydrophobic protic ionic liquids. Compared with arrays of the immobilized biocatalyst without additive, in general, the immobilized biocatalyst in the presence of protic ionic liquids showed increased values of surface area (143-245 m(2) g(-1)) and pore size (19-38 Å). Immobilization with protic ionic liquids also favoured reduced mass loss according to TG curves (always less than 42.9%) when compared to the immobilized matrix without protic ionic liquids (45.1%), except for the sample containing 3.0% protic ionic liquids (46.5%), verified by thermogravimetric analysis. Ionic liquids containing a more hydrophobic alkyl group in the cationic moiety were beneficial for recovery of the activity of the immobilized lipase. The physico-chemical characterization confirmed the presence of the enzyme and its immobilized derivatives obtained in this study by identifying the presence of amino groups, and profiling enthalpy changes of mass loss.

Aplicação de Fenton, foto-Fenton e UV/H2O2 no tratamento de efluente têxtil sintético contendo o corante Preto Biozol UC / Application of Fenton, photo-Fenton and UV/H2O2 in treating synthetic textile wastewater containing the dye Black Biozol UC

Os efluentes têxteis, geralmente, são carregados de corantes não biodegradáveis, o que dificulta o seu tratamento. Dentre as novas alternativas de tratamento estudadas, estão os Processos Oxidativos Avançados (POA). Os mesmos são processos com potencial de produzir radicais hidroxila (•OH), espécies altamente oxidantes, capazes de mineralizar a matéria orgânica. Assim, o objetivo deste trabalho foi estudar a aplicação dos POA (Fenton, foto-Fenton e UV/H2O2) no tratamento de efluente têxtil sintético contendo o corante Preto Biozol UC. Dentre os processos estudados, o mais eficiente foi o foto-Fenton (H2O2 = 1.500 mg.L-1 e Fe2+ = 75 mg.L-1), em pH = 3, que obteve 95,4 por cento e 73,0 por cento para as remoções de cor e demanda química de oxigênio (DQO), respectivamente.

The textile wastewater is usually loaded with non-biodegradable dyes, which hinder its treatment. Advanced Oxidation Processes (AOP) are among new treatment alternatives. They are processes with potential to produce hydroxyl radicals (•OH), highly oxidizing species, capable of mineralizing the organic matter. Thus, the aim of this work was to study the application of the AOP (Fenton, photo-Fenton and UV/H2O2) in the treatment of synthetic textile wastewater containing the Black Biozol UC dye. Among the studied processes, the most efficient was photo-Fenton (H2O2 = 1,500 mg.L-1 and Fe 2+ = 75 mg.L-1), at pH = 3, for color and chemical oxygen demand (COD) removals of 95.4 percent and 73.0 percent, respectively.

Partitioning of porcine pancreatic lipase in a two-phase systems of polyethylene glycol/potassium phosphate aqueous.

The hydrolysis of triglycerides at the oil-water interface, synthesis of esters and transesterification in microaqueous conditions are catalysed by lipase. For its application, a proper purification method was necessary. This study examined the application of an aqueous two-phase system to partition porcine pancreatic lipase. The influence of molecular weight and concentration of polyethylene glycol (PEG), tie line length (TLL), potassium phosphate concentration, sodium chloride (NaCl) addition and temperature in the partition was studied. The enzyme was more efficiently purified in PEG 8,000 at 14.5 degrees C (PF = 3.89-fold), presenting more recoveries at the top phase with shorter TLL and lower concentrations of PEG and potassium phosphate. Moreover, the increase of these variables repressed the purification and the further addition of NaCl did not promote the purification of the enzyme. These results demonstrated the efficiency of the aqueous two-phase system on lipase purification.

Qualidade microbiológica na obtenção de farinha e fécula de mandioca em unidades tradicionais e modelo / Microbiological quality in the flour and starch cassava processing in traditional and model unit

O objetivo deste trabalho foi avaliar a qualidade microbiológica de farinha e fécula durante as diferentes etapas do processamento de mandioca, em unidades tradicionais e em uma unidade modelo. Foram determinados índices de coliformes totais e termotolerantes, Bacillus cereus, Salmonela spp., bactérias e fungos nas farinhas e féculas. Não foram observadas presenças de B. cereus e Salmonella spp. na farinha e fécula de mandioca produzidas nas unidades estudadas. A incidência microbiana diminui com o avanço da etapa do processamento para obtenção de farinha e foi menor na unidade modelo. Após o processo de torra, a carga microbiana estava de acordo com os valores preconizados pela legislação brasileira, concluindo-se que essa etapa pode ser considerada como crítica na obtenção de farinha. Na obtenção de fécula, a carga microbiana nas unidades tradicionais são maiores que na modelo, e o aumento do número de extrações promove o aumento da incidência de microrganismos, sendo recomendadas apenas quatro extrações.

The objective of this research was to evaluate microbiological contamination in the flour and starch during cassava processing in traditional and model units. The total and fecal coliforms indexes, Bacillus cereus, Salmonella, bacteria, yeast and fungi were determined. Bacillus cereus and Salmonella were not detected in any sample. The incidence of microorganisms decreased along the processing to obtain cassava flour, and is lower in model unit. After the roasting process, the microbial load was below the values established by the Brazilian legislation, and can be regarded as a critical step in obtaining cassava flour. Concerning starch production, the microbial load in the traditional units was higher than in the model units, and the increase of the extraction steps has promoted the growth of microorganisms. It's recommended the used of only 4 extractions.

Evaluation of emulsifier stability of biosurfactant produced by Saccharomyces lipolytica CCT-0913

Surface-active compounds of biological origin are widely used for many industries (cosmetic, food, petrochemical). The Saccharomyces lipolytica CCT-0913 was able to grow and produce a biosurfactant on 5 percent (v/v) diesel-oil at pH 5.0 and 32ºC. The cell-free broth emulsified and stabilized the oil-in-water emulsion through a first order kinetics. The results showed that the initial pH value and temperature influenced the emulsifier stability (ES), which was the time when oil was separated. The biosurfactant presented different stabilization properties for vegetable and mineral oil in water solution, despite the highest values of the ES occurring with vegetable oil. The biosurfactant presented smallest ES when compared to commercial surfactants; however, this biosurfactant was not purified.

Os tensoativos de origem biológica são amplamente utilizados em diversas aplicações. O microrganismo Saccharomyces lipolytica CCT-0913 possui a habilidade de crescer em 5 por cento (v/v) óleo diesel a pH 5,0 e 32ºC e produzir biosurfactante. O caldo fermentado livre de células e produzido por S. lipolytica emulsiona e estabiliza emulsões óleo em água de acordo com uma cinética de primeira ordem. Os resultados mostram que o valor do pH inicial e a temperatura influenciam a estabilidade emulsificante (ES), que é medido pelo tempo que a quantidade de óleo. O biosurfactante apresenta diferentes valores de estabilidade emulsificante para óleos vegetais e minerais em emulsões óleo-água, os maiores valores de ES ocorrem nas emulsões utilizando óleo vegetal. O biosurfactante apresenta valores baixos de ES quando comparado com emulsificantes comerciais, entretanto sem sofrer nenhum processo de purificação.

Sequential production of amylolytic and lipolytic enzymes by bacterium strain isolated from petroleum contaminated soil.

Amylases and lipases are highly demanded industrial enzymes in various sectors such as food, pharmaceuticals, textiles, and detergents. Amylases are of ubiquitous occurrence and hold the maximum market share of enzyme sales. Lipases are the most versatile biocatalyst and bring about a range of bioconversion reactions such as hydrolysis, inter-esterification, esterification, alcoholysis, acidolysis, and aminolysis. The objective of this work was to study the feasibility for amylolitic and lipolytic production using a bacterium strain isolated from petroleum contaminated soil in the same submerged fermentation. This was a sequential process based on starch and vegetable oils feedstocks. Run were performed in batchwise using 2% starch supplemented with suitable nutrients and different vegetable oils as a lipase inducers. Fermentation conditions were pH 5.0; 30 degrees C, and stirred speed (200 rpm). Maxima activities for amyloglucosidase and lipase were, respectively, 0.18 and 1,150 U/ml. These results showed a promising methodology to obtain both enzymes using industrial waste resources containing vegetable oils.