Paclitaxel-Loaded Lipid-Coated Magnetic Nanoparticles for Dual Chemo-Magnetic Hyperthermia Therapy of Melanoma.

Melanoma is the most aggressive and metastasis-prone form of skin cancer. Conventional therapies include chemotherapeutic agents, either as small molecules or carried by FDA-approved nanostructures. However, systemic toxicity and side effects still remain as major drawbacks. With the advancement of nanomedicine, new delivery strategies emerge at a regular pace, aiming to overcome these challenges. Stimulus-responsive drug delivery systems might considerably reduce systemic toxicity and side-effects by limiting drug release to the affected area. Herein, we report the development of paclitaxel-loaded lipid-coated manganese ferrite magnetic nanoparticles (PTX-LMNP) as magnetosomes synthetic analogs, envisaging the combined chemo-magnetic hyperthermia treatment of melanoma. PTX-LMNP physicochemical properties were verified, including their shape, size, crystallinity, FTIR spectrum, magnetization profile, and temperature profile under magnetic hyperthermia (MHT). Their diffusion in porcine ear skin (a model for human skin) was investigated after intradermal administration via fluorescence microscopy. Cumulative PTX release kinetics under different temperatures, either preceded or not by MHT, were assessed. Intrinsic cytotoxicity against B16F10 cells was determined via neutral red uptake assay after 48 h of incubation (long-term assay), as well as B16F10 cells viability after 1 h of incubation (short-term assay), followed by MHT. PTX-LMNP-mediated MHT triggers PTX release, allowing its thermal-modulated local delivery to diseased sites, within short timeframes. Moreover, half-maximal PTX inhibitory concentration (IC50) could be significantly reduced relatively to free PTX (142,500×) and Taxol® (340×). Therefore, the dual chemo-MHT therapy mediated by intratumorally injected PTX-LMNP stands out as a promising alternative to efficiently deliver PTX to melanoma cells, consequently reducing systemic side effects commonly associated with conventional chemotherapies.

Improvement in Solubility-Permeability Interplay of Psoralens from Brosimum gaudichaudii Plant Extract upon Complexation with Hydroxypropyl-ß-cyclodextrin.

Psoralen (PSO) and 5-methoxypsoralen (5-MOP) are widely used drugs in oral photochemotherapy against vitiligo and major bioactive components of root bark extract of Brosimum gaudichaudii Trécul (EBGT), previously standardized by LC-MS. However, the exceptionally low water solubility of these psoralens can cause incomplete and variable bioavailability limiting their applications and patient adherence to treatment. Therefore, the purpose of this work was to investigate the effects of 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) inclusion complex on the solubility and jejunal permeability of PSO and 5-MOP from EBGT. Characterization of inclusion complexes were evaluated by current methods in nuclear magnetic resonance studies on aqueous solution, Fourier transform infrared spectroscopy, thermal analysis, and scanning electron microscopy in solid state. Ex vivo rat jejunal permeability was also investigated and compared for both pure psoralens and plant extract formulation over a wide HP-ß-CD concentration range (2.5 to 70 mM). Phase solubility studies of the PSO- and 5-MOP-HP-ß-CD inclusion complex showed 1:1 inclusion complex formation with small stability constants (Kc < 500 M−1). PSO and 5-MOP permeability rate decreased after adding HP-ß-CD by 6- and 4-fold for pure standards and EBGT markers, respectively. Nevertheless, the complexation with HP-ß-CD significantly improved solubility of PSO (until 10-fold) and 5-MOP (until 31-fold). As a result, the permeability drop could be overcome by solubility augmentation, implying that the HP-ß-CD inclusion complexes with PSO, 5-MOP, or EBGT can be a valuable tool for designing and developing novel oral drug product formulation containing these psoralens for the treatment of vitiligo.

Folate-Targeted PEGylated Magnetoliposomes for Hyperthermia-Mediated Controlled Release of Doxorubicin.

Doxorubicin (DOX) is a chemotherapeutic agent commonly used for the treatment of solid tumors. However, the cardiotoxicity associated with its prolonged use prevents further adherence and therapeutic efficacy. By encapsulating DOX within a PEGylated liposome, Doxil® considerably decreased DOX cardiotoxicity. By using thermally sensitive lysolipids in its bilayer composition, ThermoDox® implemented a heat-induced controlled release of DOX. However, both ThermoDox® and Doxil® rely on their passive retention in tumors, depending on their half-lives in blood. Moreover, ThermoDox® ordinarily depend on invasive radiofrequency-generating metallic probes for local heating. In this study, we prepare, characterize, and evaluate the antitumoral capabilities of DOX-loaded folate-targeted PEGylated magnetoliposomes (DFPML). Unlike ThermoDox®, DOX delivery via DFPML is mediated by the heat released through dynamic hysteresis losses from magnetothermal converting systems composed by MnFe2O4 nanoparticles (NPs) under AC magnetic field excitation-a non-invasive technique designated magnetic hyperthermia (MHT). Moreover, DFPML dismisses the use of thermally sensitive lysolipids, allowing the use of simpler and cheaper alternative lipids. MnFe2O4 NPs and DFPML are fully characterized in terms of their size, morphology, polydispersion, magnetic, and magnetothermal properties. About 50% of the DOX load is released from DFPML after 30 min under MHT conditions. Being folate-targeted, in vitro DFPML antitumoral activity is higher (IC50 ≈ 1 µg/ml) for folate receptor-overexpressing B16F10 murine melanoma cells, compared to MCF7 human breast adenocarcinoma cells (IC50 ≈ 4 µg/ml). Taken together, our results indicate that DFPML are strong candidates for folate-targeted anticancer therapies based on DOX controlled release.

Nose-to-brain co-delivery of drugs for glioblastoma treatment using nanostructured system.

Mutations on the epidermal growth factor receptor (EGFR), induction of angiogenesis, and reprogramming cellular energetics are all biological features acquired by tumor cells during tumor development, and also known as the hallmarks of cancer. Targeted therapies that combine drugs that are capable of acting against such concepts are of great interest, since they can potentially improve the therapeutic efficacy of treatments of complex pathologies, such as glioblastoma (GBM). However, the anatomical location and biological behavior of this neoplasm imposes great challenges for targeted therapies. A novel strategy that combines alpha-cyano-4-hydroxycinnamic acid (CHC) with the monoclonal antibody cetuximab (CTX), both carried onto a nanotechnology-based delivery system, is herein proposed for GBM treatment via nose-to-brain delivery. The biological performance of Poly (D,L-lactic-co-glycolic acid)/chitosan nanoparticles (NP), loaded with CHC, and conjugated with CTX by covalent bonds (conjugated NP) were extensively investigated. The NP platforms were able to control CHC release, indicating that drug release was driven by the Weibull model. An ex vivo study with nasal porcine mucosa demonstrated the capability of these systems to promote CHC and CTX permeation. Blot analysis confirmed that CTX, covalently associated to NP, impairs EGRF activation. The chicken chorioallantoic membrane assay demonstrated a trend of tumor reduction when conjugated NP were employed. Finally, images acquired by fluorescence tomography evidenced that the developed nanoplatform was effective in enabling nose-to-brain transport upon nasal administration. In conclusion, the developed delivery system exhibited suitability as an effective novel co-delivery approaches for GBM treatment upon intranasal administration.

Effect of angiotensin II and angiotensin-(1-7) on proliferation of stem cells from human dental apical papilla.

The effects of the renin-angiotensin system (RAS) on stem cells isolated from human dental apical papilla (SCAPs) are completely unknown. Therefore, the aim of this study was to identify RAS components expressed in SCAPs and the effects of angiotensin (Ang) II and Ang-(1-7) on cell proliferation. SCAPs were collected from third molar teeth of adolescents and maintained in cell culture. Messenger RNA expression and protein levels of angiotensin-converting enzyme (ACE), ACE2, and Mas, Ang II type I (AT1) and type II (AT2) receptors were detected in SCAPs. Treatment with either Ang II or Ang-(1-7) increased the proliferation of SCAPs. These effects were inhibited by PD123319, an AT2 antagonist. While Ang II augmented mTOR phosphorylation, Ang-(1-7) induced ERK1/2 phosphorylation. In conclusion, SCAPs produce the main RAS components and both Ang II and Ang-(1-7) treatments induced cell proliferation mediated by AT2 activation through different intracellular mechanisms.

Application of the adverse outcome pathway framework for investigating skin sensitization potential of nanomaterials using new approach methods.

BACKGROUND: Currently, considerable efforts to standardize methods for accurate assessment of properties and safety aspects of nanomaterials are being made. However, immunomodulation effects upon skin exposure to nanomaterial have not been explored. OBJECTIVES: To investigate the immunotoxicity of single-wall carbon nanotubes, titanium dioxide, and fullerene using the current mechanistic understanding of skin sensitization by applying the concept of adverse outcome pathway (AOP). METHODS: Investigation of the ability of nanomaterials to interact with skin proteins using the micro-direct peptide reactivity assay; the expression of CD86 cell surface marker using the U937 cell activation test (OECD No. 442E/2018); and the effects of nanomaterials on modulating inflammatory response through inflammatory cytokine release by U937 cells. RESULTS: The nanomaterials easily internalized into keratinocytes cells, interacted with skin proteins, and triggered activation of U937 cells by increasing CD86 expression and modulating inflammatory cytokine production. Consequently, these nanomaterials were classified as skin sensitizers in vitro. CONCLUSIONS: Our study suggests the potential immunotoxicity of nanomaterials and highlights the importance of studying the immunotoxicity and skin sensitization potential of nanomaterials to anticipate possible human health risks using standardized mechanistic nonanimal methods with high predictive accuracy. Therefore, it contributes toward the applicability of existing OECD (Organisation for Economic Co-operation and Development) testing guidelines for accurate assessment of nanomaterial skin sensitization potential.

Predictive Model for Delivery Efficiency: Erythrocyte Membrane-Camouflaged Magnetofluorescent Nanocarriers Study.

Delivery efficiencies of theranostic nanoparticles (NPs) based on passive tumor targeting strongly depend either on their blood circulation time or on appropriate modulations of the tumor microenvironment. Therefore, predicting the NP delivery efficiency before and after a tumor microenvironment modulation is highly desirable. Here, we present a new erythrocyte membrane-camouflaged magnetofluorescent nanocarrier (MMFn) with long blood circulation time (92 h) and high delivery efficiency (10% ID for Ehrlich murine tumor model). MMFns owe their magnetic and fluorescent properties to the incorporation of manganese ferrite nanoparticles (MnFe2O4 NPs) and IR-780 (a lipophilic indocyanine fluorescent dye), respectively, to their erythrocyte membrane-derived camouflage. MMFn composition, morphology, and size, as well as optical absorption, zeta potential, and fluorescent, magnetic, and magnetothermal properties, are thoroughly examined in vitro. We then present an analytical pharmacokinetic (PK) model capable of predicting the delivery efficiency (DE) and the time of peak tumor uptake (tmax), as well as changes in DE and tmax due to modulations of the tumor microenvironment, for potentially any nanocarrier. Experimental PK data sets (blood and tumor amounts of MMFns) are simultaneously fit to the model equations using the PK modeling software Monolix. We then validate our model analytical solutions with the numerical solutions provided by Monolix. We also demonstrate how our a priori nonmechanistic model for passive targeting relates to a previously reported mechanistic model for active targeting. All in vivo PK studies, as well as in vivo and ex vivo biodistribution studies, were conducted using two noninvasive techniques, namely, fluorescence molecular tomography (FMT) and alternating current biosusceptometry (ACB). Finally, histopathology corroborates our PK and biodistribution results.

IR-780-Albumin-Based Nanocarriers Promote Tumor Regression Not Only from Phototherapy but Also by a Nonirradiation Mechanism.

IR-780 iodide is a fluorescent dye with optical properties in the near-infrared region that has applications in tumor detection and photothermal/photodynamic therapy. This multifunctional effect led to the development of theranostic nanoparticles with both IR-780 and chemotherapeutic drugs such as docetaxel, doxorubicin, and lonidamine. In this work, we developed two albumin-based nanoparticles containing near-infrared IR-780 iodide multifunctional dyes, one of them possessing a magnetic core. Molecular docking with AutoDock Vina studies showed that IR-780 binds to bovine serum albumin (BSA) with greater stability at a higher temperature, allowing the protein binding pocket to better fit this dye. The theoretical analysis corroborates the experimental protocols, where an enhancement of IR-780 was found coupled to BSA at 60 °C, even 30 days after preparation, in comparison to 30 °C. In vitro assays monitoring the viability of Ehrlich ascites carcinoma cells revealed the importance of the inorganic magnetic core on the nanocarrier photothermal-cytotoxic effect. Fluorescence molecular tomography measurements of Ehrlich tumor-bearing Swiss mice revealed the biodistribution of the nanocarriers, with marked accumulation in the tumor tissue (≈3% ID). The histopathological analysis demonstrated strong increase in tumoral necrosis areas after 24 and 72 h after treatment, indicating tumor regression. Tumor regression analysis of nonirradiated animals indicate a IR-780 dose-dependent antitumoral effect with survival rates higher than 70% (animals monitored up to 600 days). Furthermore, an in vivo photothermal therapy procedure was performed and tumor regression was also verified. These results show a novel insight for the biomedical application of IR-780-albumin-based nanocarriers, namely cancer therapy, not only by photoinduced therapy but also by a nonirradiation mechanism. Safety studies (acute oral toxicity, cardiovascular evaluation, and histopathological analysis) suggest potential for clinical translation.

Protective effect of sucupira oil nanoemulsion against oxidative stress in UVA-irradiated HaCaT cells.

OBJECTIVES: Bioactive molecules derived from natural products combine the ability to absorb UV light and act as antioxidants. We developed an oil-based sucupira (native species of the Brazilian cerrado) nanoemulsion (NE) using a high-energy emulsification method and assessed its effectiveness in vitro. METHODS: An easily scalable high-pressure homogenization method was used to prepare the formulation. NE droplets mean diameter, pH, stability, conductivity and morphology were analysed. Formulation bioactivity was assessed using HaCaT cells. KEY FINDINGS: The formulation presented suitable pH and size for topic administration and was stable for over 90 days upon storage at 4, 25 and 45°C. The NE showed protective effect against oxidative stress and reduced levels of UVA-induced pro-inflammatory cytokines IL-6 and IL-8. CONCLUSIONS: A novel, stable and easily prepared formulation was obtained for encapsulation of sucupira oil. The protective effect of the formulation by cytokine inhibition in the early stage of the inflammatory process was shown in vitro. Combined with the antioxidant effect by inhibition of reactive oxygen species, the use of sucupira oil NE for prevention and treatment of UVA-induced stress could contribute to decrease the effects of UV radiation on skin ageing.

Thermoreversible mucoadhesive polymer-drug dispersion for sustained local delivery of budesonide to treat inflammatory disorders of the GI tract.

Mucoadhesive drug formulations have been studied and used as alternatives to conventional formulations in order to achieve prolonged retention at the intended site. In addition to providing a controlled drug release, several drugs and disease conditions might benefit from mucoadhesive formulations, contributing to better therapeutic outcomes. Here, we describe the development and the in vitro/in vivo characterization of a mucoadhesive in situ gellifying formulation using PF127, a thermo reversible polymer, entrapping budesonide (BUD), a potent corticosteroid used for the treatment of a wide range of inflammatory diseases, including those affecting mucosas, such as in the GI tract. PF127 formulations (15-17%) were successfully prepared by a cold method as a thermo reversible in situ gelling dispersion for mucosal drug delivery, as confirmed by DSC. Sol-gel temperatures of PF127 formulations (25-39 °C) were observed by dynamic gelation and determined by microrheology and oscillatory rheometry. X-ray diffractograms and TEM images showed that BUD was completely solubilized within the polymeric micelles. In vitro, the gels showed 5-14 g force of mucoadhesion, and the ex vivo studies confirmed that the formulation efficiently adhered to the mucosa. Histopathological analysis combined with fluorescence images and ex vivo intestinal permeation confirmed that the formulation remained on the TGI mucosa for at least 4 h after administration. In vivo studies conducted in a murine model of intestinal mucositis demonstrated that the 16% PF127 BUD formulation was able to resolve the inflammatory injury in the intestinal mucosa. Results demonstrate that fine-tuning of PF127 formulations along with adequate selection of the drug agent, thorough characterization of the dispersions and their interactions with biological interfaces leads to the development of effective controlled drug delivery systems targeted to GI inflammatory diseases.

Evaluation of in vitro testing strategies for hazard assessment of the skin sensitization potential of "real-life" mixtures: The case of henna-based hair-colouring products containing p-phenylenediamine.

BACKGROUND: Allergic contact dermatitis caused by henna-based hair-colouring products has been associated with adulteration of henna with p-phenylenediamine (PPD). OBJECTIVES: To develop a testing approach based on in vitro techniques that address key events within the skin sensitization adverse outcome pathway in order to evaluate the allergenic potential of hair-colouring products. METHODS: The following in vitro assays were used to test the sensitizing capacity of hair dye ingredients: the micro-direct peptide reactivity assay (mDPRA); the HaCaT keratinocyte-associated interleukin (IL)-18 assay; the U937 cell line activation test (U-SENS)/IL-8 levels; the blood monocyte-derived dendritic cell test; and genomic allergen rapid detection (GARD skin). Those techniques with better human concordance were selected to evaluate the allergenic potential of 10 hair-colouring products. RESULTS: In contrast to the information on the label, chromatographic analyses identified PPD in all products. The main henna biomarker, lawsone, was not detected in one of the 10 products. Among the techniques evaluated by testing hair dye ingredients, the mDPRA, the IL-18 assay, GARD skin and the U-SENS correlated better with human classification (concordances of 91.7%-100%) and were superior to the animal testing (concordance of 78.5%). Thus, these assays were used to evaluate hair-colouring products, which were classified as skin sensitizers by the use of different two-of-three approaches. CONCLUSIONS: Our findings highlight the toxicological consequences of, and risks associated with, the undisclosed use of PPD in henna-based "natural" "real-life" products.

Triggered release of paclitaxel from magnetic solid lipid nanoparticles by magnetic hyperthermia.

We developed a magnetic solid lipid nanoparticles formulation of paclitaxel (PTX-loaded MSLNs) via emulsification-diffusion method. The physicochemical characterization of PTX-loaded MSLNs was performed by AFM, DLS, determination of entrapment efficiency (EE) and drug loading (DL), DSC, VSM, and physical stability. The in vitro effect of temperature and pulsed magnetic hyperthermia on drug release were studied. PTX-loaded MSLNs had a particle diameter around 250 nm with a narrow size distribution, spherical morphology, EE of 67.3 ±â€¯1.2% and a DL of 17.1 ±â€¯0.4 µg/mg. A decrease of the melting point of the lipid was observed following the preparation of the MSLNs. A threefold increase in the in vitro drug release rate was seen when temperature was raised from 25 to 43 °C. The lipid coating of MPs confer a temperature-dependent drug release and magnetic hyperthermia was used to trigger controlled PTX release from MSLNs.

Intravenous delivery of a liposomal formulation of voriconazole improves drug pharmacokinetics, tissue distribution, and enhances antifungal activity.

Voriconazole (VCZ), a triazole with a large spectrum of action is one of the most recommended antifungal agents as the first line therapy against several clinically important systemic fungal infections, including those by Candida albicans. This antifungal has moderate water solubility and exhibits a nonlinear pharmacokinetic (PK) profile. By entrapping VCZ into liposomes, it is possible to circumvent certain downsides of the currently available product such as a reduction in the rate of its metabolization into an inactive form, avoidance of the toxicity of the sulfobutyl ether-beta-cyclodextrin (SBECD), vehicle used to increase its solubility. PKs and biodistribution of VCZ modified by encapsulation into liposomes resulted in improved antifungal activity, due to increased specificity and tissue penetration. In this work, liposomal VCZ resulted in AUC0-24/MIC ratio of 53.51 ± 11.12, whereas VFEND® resulted in a 2.5-fold lower AUC0-24/MIC ratio (21.51 ± 2.88), indicating favorable antimicrobial systemic activity. VCZ accumulation in the liver and kidneys was significantly higher when the liposomal form was used. Protection of the drug from biological degradation and reduced rate of metabolism leads to a 30% reduction of AUC of the inactive metabolite voriconazole-N-oxide (VNO) when the liposomal drug was administered. Liposomal VCZ presents an alternative therapeutic platform, leading to a safe and effective treatment against systemic fungal infections.

In Vivo Vaginal Fungal Load Reduction After Treatment with Itraconazole-Loaded Polycaprolactone-Nanoparticles.

Itraconazole (ITZ) has a broad spectrum of action and is commonly used for the treatment of fungal infections. Topic administration of ITZ is a promising strategy to improve vulvovaginal candidiasis treatment, which can be further optimized by its encapsulation in nanoparticles to increase drug delivery and reduce ITZ toxicity. In this work, we designed polycaprolactone nanoparticles containing ITZ and evaluated in vivo the efficacy of this yet unexplored approach. Nanocapsules (ITZ-NC) and nanospheres (ITZ-NS) were obtained by nanoprecipitation. ITZ-NC presented encapsulation efficiency of 99%, mean diameter of 190 nm, PDI 0.1 and zeta potential of -15 mV. ITZ-NS showed encapsulation efficiency of 97%, mean diameter of 120 nm, PDI 0.1 and zeta potential of -10 mV. Both particles were efficiently freeze-dried using 10% trehalose + 10% sucrose. Nanoparticles were then incorporated in a viscous formulation for vaginal application in female Balb/C mice infected with Candida albicans. Fungal load was significantly reduced in infected animals after treatment with ITZ-NC but not with ITZ-NS, compared to animals treated with ITZ solution. Histological analysis showed a clear difference between vaginal tissues of ITZ-NC and ITZ-NS and ITZ solution-treated animals, which correlated with IL-1ß and TNF-α quantification. Animals treated with ITZ-NC showed reduced cytokine levels and healthy tissue characteristics, while animals treated with ITZ-NS and ITZ solution showed increased IL-1ß and TNF-α levels and typical tissue inflammation. Our results demonstrate the potential of ITZ-NC to improve the treatment of vulvovaginal candidiasis after topical application in the vagina, opening new perspectives for the treatment of this disease.

Taste masking and rheology improvement of drug complexed with beta-cyclodextrin and hydroxypropyl-ß-cyclodextrin by hot-melt extrusion.

This study aimed to mask fluconazole (FLU) taste and improve its rheological properties by an efficient process of cyclodextrin complexation. For this, hot-melt extrusion (HME) was used to obtain extrudates composed of FLU, hydroxypropylcellulose, and one of two different cyclodextrins (ß-cyclodextrin or hydroxypropyl-ß-cyclodextrin) maintaining the drug:cyclodextrin molar ratio at 1:0.3 or 1:0.2, respectively. Samples were characterized by physicochemical tests, palatability using e-tongue and antifungal assays. Drug stability was preserved after HME, according to spectroscopy test (correlation coefficient >0.9) and HPLC-assay (100-107%). Flowability was improved in HME systems with compressibility of <12%. Similarly, floodability exhibited significant enhancement (dispersibility <10%). Whereas extrudates of FLU containing only the polymeric matrix led to a slow drug dissolution efficiency (18.6%) and a partial drug taste masking; extrudates containing cyclodextrin accelerated FLU dissolution (dissolution efficiency approx. 30%) and provided a complete drug taste masking. Moreover, HME process could produce drug complexes with high complexation efficiency and preserve its antifungal activity.

Mechanistic understanding of in vivo protein corona formation on polymeric nanoparticles and impact on pharmacokinetics.

In vitro incubation of nanomaterials with plasma offer insights on biological interactions, but cannot fully explain the in vivo fate of nanomaterials. Here, we use a library of polymer nanoparticles to show how physicochemical characteristics influence blood circulation and early distribution. For particles with different diameters, surface hydrophilicity appears to mediate early clearance. Densities above a critical value of approximately 20 poly(ethylene glycol) chains (MW 5 kDa) per 100 nm2 prolong circulation times, irrespective of size. In knockout mice, clearance mechanisms are identified for nanoparticles with low and high steric protection. Studies in animals deficient in the C3 protein showed that complement activation could not explain differences in the clearance of nanoparticles. In nanoparticles with low poly(ethylene glycol) coverage, adsorption of apolipoproteins can prolong circulation times. In parallel, the low-density-lipoprotein receptor plays a predominant role in the clearance of nanoparticles, irrespective of poly(ethylene glycol) density. These results further our understanding of nanopharmacology.Understanding the interaction between nanoparticles and biomolecules is crucial for improving current drug-delivery systems. Here, the authors shed light on the essential role of the surface and other physicochemical properties of a library of nanoparticles on their in vivo pharmacokinetics.

Use of mixture design in drug-excipient compatibility determinations: Thymol nanoparticles case study.

The objective of this work was to access thymol-excipient compatibility using an alternative protocol of mixture design subsidizing the development of nanostructures lipid carriers containing this drug. Simultaneous DTA-TG analyses associated with infrared spectroscopy were performed according to simplex centroid mixture designs with three components. Two designs were used: the design A containing stearic acid (SA), soybean lecithin (LC), and sodium taurodeoxycholate (TAU) and the design B, where TAU was replaced by polysorbate 80 (P80). Assays allowed for a quantitative evaluation of thermal events involved with thymol (TML) - melting and evaporation -, as well as events related to excipients decomposition and overall system stability. Although the anionic surfactant TAU did not interact with TML in solid state, chemical and physical stability were compromised after drug melting. Alternatively, nonionic surfactant P80 could be a good excipient option, as TML formulation stability was not influenced by it. Fatty acid SA did not compromise TML stability alone, but, when in combination with other formulation components, negative interaction leading to a possible decomposition of the system was observed. Finally, phospholipid LC solubilizes TML extending its evaporation to higher temperatures; hence, drug stability may be increased. In conclusion, the use of mixture design in the evaluation of multicomponent systems is a valuable tool for identification of synergistic effects of excipients, providing more complete information on formulation development. In addition, the association of techniques employed allowed inferring with certainty if thermal interactions could compromise formulation stability.

Solid effervescent formulations as new approach for topical minoxidil delivery.

Currently marketed minoxidil formulations present inconveniences that range from a grease hard aspect they leave on the hair to more serious adverse reactions as scalp dryness and irritation. In this paper we propose a novel approach for minoxidil sulphate (MXS) delivery based on a solid effervescent formulation. The aim was to investigate whether the particle mechanical movement triggered by effervescence would lead to higher follicle accumulation. Preformulation studies using thermal, spectroscopic and morphological analysis demonstrated the compatibility between effervescent salts and the drug. The effervescent formulation demonstrated a 2.7-fold increase on MXS accumulation into hair follicles casts compared to the MXS solution (22.0±9.7µg/cm2 versus 8.3±4.0µg/cm2) and a significant drug increase (around 4-fold) in remaining skin (97.1±29.2µg/cm2) compared to the drug solution (23.5±6.1µg/cm2). The effervescent formulations demonstrated a prominent increase of drug permeation highly dependent on the effervescent mixture concentration in the formulation, confirming the hypothesis of effervescent reaction favoring drug penetration. Clinically, therapy effectiveness could be improved, increasing the administration interval, hence, patient compliance. More studies to investigate the follicular targeting potential and safety of new formulations are needed.

Preparation of benznidazole pellets for immediate drug delivery using the extrusion spheronization technique.

Recent advances in the treatment of Chagas disease have followed combinations of drugs that act synergistically against infection, predominantly including benznidazole (BNZ) and azoles derivatives. Possible incompatibilities between these drugs, slow dissolution of BNZ and dose adjustment difficulties are technological obstacles to the development of multidrug formulations. Thus, in the present study, BNZ pellets were developed using extrusion spheronization for immediate drug delivery. Preformulation studies were then performed using thermal analysis and infrared spectroscopy and compatibility between the drug and selected excipients (polyethylene glycol 6000, sodium starch glycolate, microcrystalline cellulose and sodium croscarmellose) was investigated. No chemical decomposition of BNZ was observed, even in samples submitted to wet granulation and thermal stress. Subsequently, formulations were elaborated according to a simplex lattice experimental design using polyethylene glycol, sodium starch glycolate and sodium croscarmellose as disintegrating agents. In these experiments, BNZ pellets showed appropriate physicochemical characteristics, including high drug load capacity and excellent flow properties. The mixture experimental design allowed identification of adequate compositions of disintegrating agents and achieved rapid disintegration and dissolution of pellets. Optimum performance was achieved using polyethylene glycol and sodium croscarmellose at 5.0% w/w each. The present BNZ pellets are versatile alternatives to treat Chagas disease and provide insights into the preparation of multidrug systems.

Development of carvedilol-cyclodextrin inclusion complexes using fluid-bed granulation: a novel solid-state complexation alternative with technological advantages.

OBJECTIVES: This study sought to evaluate the achievement of carvedilol (CARV) inclusion complexes with modified cyclodextrins (HPßCD and HPγCD) using fluid-bed granulation (FB). METHODS: The solid complexes were produced using FB and spray drying (SD) and were characterised by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction, SEM, flowability and particle size analyses and in vitro dissolution. KEY FINDINGS: The DSC, FTIR and powder X-ray diffraction findings suggested successful CARV inclusion in the modified ß- and γ-cyclodextrins, which was more evident in acidic media. The CARV dissolution rate was ~7-fold higher for complexes with both cyclodextrins prepared using SD than for raw CARV. Complexes prepared with HPßCD using FB also resulted in a significant improvement in dissolution rate (~5-fold) and presented superior flowability and larger particle size. CONCLUSIONS: The findings suggested that FB is the best alternative for large-scale production of solid dosage forms containing CARV. Additionally, the results suggest that HPγCD could be considered as another option for CARV complexation because of its excellent performance in inclusion complex formation in the solid state.