Copper(II)-MOFs for bio-applications.

The recent development and implementation of copper-based metal-organic frameworks in biological applications are reviewed. The advantages of the presence of copper in MOFs for relevant applications such as drug delivery, cancer treatment, sensing, and antimicrobial are highlighted. Advanced composites such as MOF-polymers are playing critical roles in developing materials for specific applications.

SU-101: a Bi(III)-based metal-organic framework as an efficient heterogeneous catalyst for the CO2 cycloaddition reaction.

A non-porous version of SU-101 (herein n-SU-101) was evaluated for the CO2 cycloaddition reaction. The findings revealed that open metal sites (Bi3+) are necessary for the reaction. n-SU-101 displays a high styrene oxide conversion of 96.6% under mild conditions (3 bar and 80 °C). The catalytic activity of n-SU-101 demonstrated its potential application for the cycloaddition of CO2 using styrene oxide.

Linezolid@MOF-74 as a host-guest system with antimicrobial activity.

Linezolid (LNZ) is a new-generation synthetic molecule for the antibacterial treatment of severe infections, particularly in infective cases where the bacterial resistance to first-choice drugs is caused by Gram-positive pathogens. In this context, since 2009, some strains resistant to LNZ in patients with long-term treatments have been reported. Therefore, there is a need to use not only new drug molecules with antibacterial activities in the dosage form but also a different approach to pharmacotherapeutic strategies for skin infections, which lead to a reduction in the concentration of biocides. This work explores LNZ hosted at two isostructural MOFs, MOF-74(Zn) and MOF-74(Cu), as promising antimicrobial systems for gradual biocide release within 6 h. These systems reach a lower minimum inhibitory concentration (MIC) in comparison to free LNZ. Even a decreased MIC value is also observed, which is an encouraging result regarding the efficiency of the systems to control concentration-dependent antimicrobial resistance.

Gold nanoparticles: current and upcoming biomedical applications in sensing, drug, and gene delivery.

Gold nanoparticles (AuNPs) present unique physicochemical characteristics, low cytotoxicity, chemical stability, size/morphology tunability, surface functionalization capability, and optical properties which can be exploited for detection applications (colorimetry, surface-enhanced Raman scattering, and photoluminescence). The current challenge for AuNPs is incorporating these properties in developing more sensible and selective sensing methods and multifunctional platforms capable of controlled and precise drug or gene delivery. This review briefly highlights the recent progress of AuNPs in biomedicine as bio-sensors and targeted nano vehicles.

Coloured hybrid materials: exploiting an emergent surface property of fluorinated Al2O3 containing anthocyanins and betacyanins.

Two fluorinated γ-Al2O3 series were synthesized by a sol-gel method with two solvents (2-propanol and 2-butanol), two aluminium sources (ATB and ATP) and one fluorine source (Na3AlF6). The resulting inorganic matrixes were evaluated to characterize aluminium and fluorine species ([AlO45-], [AlO57-], [AlO69-], [AlF4-], [AlF52-] and [AlF63-]) by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), 27Al magic angle spinning nuclear magnetic resonance (27Al MAS-NMR) and infrared spectroscopy (IR-ATR). BET and BJH analyses using the nitrogen isotherms of these materials allowed identifying a clear trend in some textural parameters such as specific surface area and fluorine content. These results were confirmed by scanning electron microscopy (SEM). Chemical affinity and acid surface properties were evidenced with colour shifts in two groups of hybrid pigments, prepared with natural anthocyanins (Brassica oleracea) and betacyanins (Bougainvillea glabra).

Sc(III)-Based metal-organic frameworks.

Scandium(III) ions can form robust metal-organic frameworks (MOFs) with relative ease of synthesis. However, their use in MOF construction remains scarce compared to the vast collection of MOFs using other ions. This highlight features the chronological development of Sc(III)-MOFs, which attest to the ability of Sc(III) ions to afford materials that combine exceptional stability with catalytic or photo-physical attributes.

A poly (saccharide-ester-urethane) scaffold for mammalian cell growth.

Chitosan and poly(3-hydroxybutyrate) are non-toxic, biodegradable, and biocompatible polymers extensively used in regenerative medicine. However, it is unknown whether the chemical combination of these polymers can produce a biomaterial that induces an appropriate cellular response in vitro in mammalian cells. This study aimed to test the ability of a novel salt-leached polyurethane scaffold of chitosan grafted with poly(3-hydroxybutyrate) to support the growth of three mammalian cell lines of different origin: a) HEK-293 cells, b) i28 mouse myoblasts, and c) human dermal fibroblasts. The viability of the cells was assessed by either evaluation of their capacity to maintain the expression of the green fluorescent protein by adenoviral transduction or by esterase activity and plasma membrane integrity. The results indicated that the three cell lines attached well to the scaffold; however, when i28 cells were induced to differentiate, they did not produce morphologically distinct myofibers, and cell growth ceased. In conclusion, the findings reveal that, altogether, these observations suggest that this foam scaffold supports cell growth and proliferation but may not apply to all cell types. Hence, one crucial question yet to be resolved is a poly (saccharide-ester-urethane) derivative with a nano-topography that elicits a similar cellular response for different biological environments.

Critical Thickness of Free-Standing Nanothin Films Made of Melted Polyethylene Chains via Molecular Dynamics.

The mechanical stability of nanothin free-standing films made of melted polyethylene chains was predicted via molecular dynamics simulations in the range of 373.15-673.15 K. The predicted critical thickness, tc, increased with the square of the temperature, T, with additional chains needed as T increased. From T = 373.15 K up to the thermal limit of stability for polyethylene, tc values were in the range of nanothin thicknesses (3.42-5.63 nm), which approximately corresponds to 44-55 chains per 100 nm2. The density at the center of the layer and the interfacial properties studied (density profiles, interfacial thickness, and radius of gyration) showed independence from the film thickness at the same T. The polyethylene layer at its tc showed a lower melting T (<373.15 K) than bulk polyethylene.

SO2 Capture Using Porous Organic Cages.

We report the first experimental investigation of porous organic cages (POCs) for the demanding challenge of SO2 capture. Three structurally related N-containing cage molecular materials were studied. An imine-functionalized POC (CC3) showed modest and reversible SO2 capture, while a secondary-amine POC (RCC3) exhibited high but irreversible SO2 capture. A tertiary amine POC (6FT-RCC3) demonstrated very high SO2 capture (13.78 mmol g-1 ; 16.4 SO2 molecules per cage) combined with excellent reversibility for at least 50 adsorption-desorption cycles. The adsorption behavior was investigated by FTIR spectroscopy, 13 C CP-MAS NMR experiments, and computational calculations.

Identification of the preferential CO and SO2 adsorption sites within NOTT-401.

NOTT-401 was found to be a highly stable adsorbent for SO2 and CO with excellent cyclability and a straightforward regeneration at room temperature. Moreover, the preferential CO binding sites within the MOF material have been identified by experimental in situ DRIFT spectroscopy coupled with DFT and QTAIM calculations. Such preferential CO adsorption sites were correlated to identify the most significant SO2 interactions within NOTT-401. This study sheds light on the role of the thiophene and hydroxo functionality, for a MOF material, in the binding of SO2 or CO.

Controlled Transdermal Release of Antioxidant Ferulate by a Porous Sc(III) MOF.

The Sc(III) MOF-type MFM-300(Sc) is demonstrated in this study to be stable under physiological conditions (PBS), biocompatible (to human skin cells), and an efficient drug carrier for the long-term controlled release (through human skin) of antioxidant ferulate. MFM-300(Sc) also preserves the antioxidant pharmacological effects of ferulate while enhancing the bio-preservation of dermal skin fibroblasts, during the delivery process. These discoveries pave the way toward the extended use of Sc(III)-based MOFs as drug delivery systems (DDSs).

Greener synthesis of Cu-MOF-74 and its catalytic use for the generation of vanillin.

A greener synthesis of Cu-MOF-74 was obtained, for the first time, in methanol as the unique solvent and at room temperature. Full characterisation of the MOF material showed its purity and also its nanocrystalline nature. Complete activation (150 °C for 1 h and 10-3 bar) of Cu-MOF-74 afforded unsaturated Cu metal sites and this was corroborated by in situ DRIFT spectroscopy. The access to these Cu open metal sites was tested for the catalytic transformation of trans-ferulic acid to vanillin (yield of 71% and 97% selectivity) and a plausible catalytic reaction mechanism was postulated based on quantum chemical calculations.

Hybrid pigments resulting from several guest dyes onto γ-alumina host: A spectroscopic analysis.

The synthesis of hybrid pigments was made from combination of γ-Al2O3 and some organic chromophores such as carminic acid, alizarin, purpurin, curcumin, fluorescein and betacyanins. The γ-Al2O3 was obtained through sol-gel synthesis with 2-propanol and aluminium tri-sec-butoxide (ATB). This article presents some spectroscopic evidences related to the formation of aluminium complexes between coordinative unsaturated sites (CUS) of aluminium and some organic groups (carboxylic acid, quaternary ammonium and ß-keto enol) present in the chromophores structure. The physicochemical properties upcoming from a spectroscopic analysis point out that these materials can be applied in the design of new materials with potential uses in artworks and in the field of cultural heritage.

Water Adsorption Properties of NOTT-401 and CO2 Capture under Humid Conditions.

The water-stable material NOTT-401 was investigated for CO2 capture under humid conditions. Water adsorption properties of NOTT-401 were studied, and their correlation with CO2 sequestration at different relative humidities (RHs) showed that the CO2 capture increased from 1.2 wt % (anhydrous conditions) to 3.9 wt % under 5% RH at 30 °C, representing a 3.2-fold improvement.

Physicochemical and functional characterization of the collagen-polyvinylpyrrolidone copolymer.

Collagen-polyvinylpyrrolidone (C-PVP) is a copolymer that is generated from the γ irradiation of a mixture of type I collagen and low-molecular-weight PVP. It is characterized by immunomodulatory, fibrolytic, and antifibrotic properties. Here, we used various physicochemical and biological strategies to characterize the structure, biochemical susceptibility, as well as its effects on metabolic activity in fibroblasts. C-PVP contained 16 times more PVP than collagen, but only 55.8% of PVP was bonded. Nevertheless, the remaining PVP exerted strong structural activity due to the existence of weak bonds that provided shielding in the NMR spectra. On SEM and AFM, freeze-dried C-PVP appeared as a film that uniformly covered the collagen fibers. Size analysis revealed the presence of abundant PVP molecules in the solution of the copolymer with a unique dimension related to macromolecular combinations. Calorimetric analysis showed that the copolymer in solution exhibited structural changes at 110 °C, whereas the lyophilized form showed such changes at temperatures below 50 °C. The copolymer presented a rheopectic behavior, with a predominant effect of the collagen. C-PVP had biological effects on the expression of integrin α2 and prolyl-hydroxylase but did not interact with cells through the collagen receptors because it did not inhibit or slow contraction.

Gold nanoparticles as efficient antimicrobial agents for Escherichia coli and Salmonella typhi.

BACKGROUND: It is imperative to eliminate bacteria present in water in order to avoid problems in healthy. Escherichia coli and Salmonella typhi bacteria are two common pollutants and they are developing resistance to some of the most used bactericide. Therefore new biocide materials are being tested. Thus, gold nanoparticles are proposed to inhibit the growth of these two microorganisms. RESULTS: Gold nanoparticles were supported onto clinoptilolite, mordenite and faujasite zeolites. Content of gold in materials varied between 2.3 and 2.8 wt%. The size, dispersion and roughness of gold nanoparticles were highly dependent of the zeolite support. The faujasite support was the support where the 5 nm nanoparticles were highly dispersed. The efficiency of gold-zeolites as bactericides of Escherichia coli and Salmonella typhi was determined by the zeolite support. CONCLUSIONS: Gold nanoparticles dispersed on zeolites eliminate Escherichia coli and Salmonella typhi at short times. The biocidal properties of gold nanoparticles are influenced by the type of support which, indeed, drives key parameters as the size and roughness of nanoparticles. The more actives materials were pointed out Au-faujasite. These materials contained particles sized 5 nm at surface and eliminate 90-95% of Escherichia coli and Salmonella typhi colonies.

Fluorinated hydrotalcites: the addition of highly electronegative species in layered double hydroxides to tune basicity.

Hydrotalcite-like compounds were synthesized by coprecipitation using a constant-pH method. Aluminum was introduced in the form of an octahedral aluminum fluorine complex during the synthesis. Controlling the pH during the synthesis ensured that aluminum fluorine did not decompose to tetrahedral species but remained in the octahedral (AlF(6))(3-) form to be incorporated into brucite-like sheets. The physicochemical, thermal, and spectroscopic characterizations showed significant modifications by fluorine introduction regarding structural, textural, and adsorption properties. The memory effect of fluorinated hydrotalcites differed from the memory effect commonly observed in fluorine-free hydrotalcites. Nitromethane adsorption showed that the basicity of hydrotalcite was greatly modified by the fluorine loading.

Structural and thermochemical chemisorption of CO2 on Li(4+x)(Si(1-x)Al(x))O4 and Li(4-x)(Si(1-x)V(x))O4 solid solutions.

Different Li(4)SiO(4) solid solutions containing aluminum (Li(4+x)(Si(1-x)Al(x))O(4)) or vanadium (Li(4-x)(Si(1-x)V(x))O(4)) were prepared by solid state reactions. Samples were characterized by X-ray diffraction and solid state nuclear magnetic resonance. Then, samples were tested as CO(2) captors. Characterization results show that both, aluminum and vanadium ions, occupy silicon sites into the Li(4)SiO(4) lattice. Thus, the dissolution of aluminum is compensated by Li(1+) interstitials, while the dissolution of vanadium leads to lithium vacancies formation. Finally, the CO(2) capture evaluation shows that the aluminum presence into the Li(4)SiO(4) structure highly improves the CO(2) chemisorption, and on the contrary, vanadium addition inhibits it. The differences observed between the CO(2) chemisorption processes are mainly correlated to the different lithium secondary phases produced in each case and their corresponding diffusion properties.

CO2 capture at low temperatures (30-80 °C) and in the presence of water vapor over a thermally activated Mg-Al layered double hydroxide.

The carbonation process of a calcined Mg-Al layered double hydroxide (LDH) was systematically analyzed at low temperatures, varying the relative humidity. Qualitative and quantitative experiments were performed. In a first set of experiments, the relative humidity was varied while maintaining a constant temperature. Characterization of the rehydrated products by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and solid-state NMR revealed that the samples did not recover the LDH structure; instead hydrated MgCO(3) was produced. The results were compared with similar experiments performed on magnesium oxide for comparison purposes. Then, in the second set of experiments, a kinetic analysis was performed. The results showed that the highest CO(2) capture was obtained at 50 °C and 70% of relative humidity, with a CO(2) absorption capacity of 2.13 mmol/g.

Thermokinetic study of the rehydration process of a calcined MgAl-layered double hydroxide.

The rehydration process of a calcined MgAl-layered double hydroxide (LDH) with a Mg/Al molar ratio of 3 was systematically analyzed at different temperatures and relative humidity. Qualitative and quantitative experiments were done. In the first set of samples, the temperature or the relative humidity was varied, fixing the second variable. Both adsorption and absorption phenomena were present; absorption process was associated to the LDH regeneration. Of course, in all cases the LDH regeneration was confirmed by other techniques such as TGA, solid state NMR, and SAXS. In the second set of experiments, a kinetic analysis was performed, the results allowed to obtain different activation enthalpies for the LDH regeneration as a function of the relative humidity. The activation enthalpies varied from 137.6 to 83.3 kJ/mol as a function of the relative humidity (50 and 80%, respectively). All these experiments showed that LDH regeneration is highly dependent on the temperature and relative humidity.