The use of a portable X-ray fluorescence spectrometer for measuring nickel in plants: sample preparation and validation.

X-ray fluorescence is a fast, cost-effective, and eco-friendly method for elemental analyses. Portable X-ray fluorescence spectrometers (pXRF) have proven instrumental in detecting metals across diverse matrices, including plants. However, sample preparation and measurement procedures need to be standardized for each instrument. This study examined sample preparation methods and predictive capabilities for nickel (Ni) concentrations in various plants using pXRF, employing empirical calibration based on inductively coupled plasma optical emission spectroscopy (ICP-OES) Ni data. The evaluation involved 300 plant samples of 14 species with variable of Ni accumulation. Various dwell times (30, 60, 90, 120, 300 s) and sample masses (0.5, 1.0, 1.5, 2.0 g) were tested. Calibration models were developed through empirical and correction factor approaches. The results showed that the use of 1.0 g of sample (0.14 g cm-2) and a dwell time of 60 s for the study conditions were appropriate for detection by pXRF. Ni concentrations determined by ICP-OES were highly correlated (R2 = 0.94) with those measured by the pXRF instrument. Therefore, pXRF can provide reliable detection of Ni in plant samples, avoiding the digestion of samples and reducing the decision-making time in environmental management.

Assessing heavy metal contamination in a Brazilian metropolis: a case study with a focus on (bio)indicators.

The continuous expansion of the global vehicle fleet poses a growing threat to environmental quality through heavy metal contamination. In this scenario, monitoring to safeguard public health in urban areas is necessary. Our study involved the collection of 36 street dust and 29 moss samples from roads of a Brazilian metropolis (Recife) with varying traffic intensities as follows: natural reserve (0 vehicles per day), low (< 15,000 vehicles per day), medium (15,000-30,000 vehicles per day), and high (> 30,000 vehicles per day). ICP-AES analysis was performed to determine the concentrations of nine potentially toxic metals (Ba, Cd, Cr, Cu, Mn, Ni, Pb, V, and Zn) to assess the influence of vehicular flow on urban contamination. In the street dust samples, the mean metal concentrations (mg kg-1) exhibited the following order: Ba (503.7) > Mn (303.0) > Zn (144.4) > Cu (95.3) > Cr (56.1) > Pb (34.2) > V (28.7) > Ni (11.3) > Cd (1.5). Conversely, in the moss samples, the metal concentration order was as follows (mg kg-1): Mn (63.8) > Zn (62.5) > Ba (61.0) > Cu (17.7) > Cr (8.0) > V (7.3) > Pb (7.0) > Ni (2.9) > Cd (0.3). Roads with higher traffic volumes exhibited the highest metal enrichments in moss samples for all metals and in dust samples for Cd, Cr, Mn, Ni, and V. However, dust from low-flow roads had higher enrichments for Ba, Cu, and Zn, indicating the influential role of other traffic-related factors in metal deposition. Our findings highlight traffic flow as the predominant source of pollution in urban centers, with both street dust and moss serving as sensitive indicators of metal input attributable to vehicular traffic. These indicators offer valuable insights for urban quality monitoring and pollution control efforts.

Baseline concentrations, source apportionment, and probabilistic risk assessment of heavy metals in urban street dust in Northeast Brazil.

Heavy metal pollution by accelerating urbanization is an emerging socio-environmental issue that poses a potential risk to human health and the environment. In this scenario, street dust is a primary source of contaminants. Here, the metal concentrations in street dust of one of the biggest Brazilian cities were assessed aiming to identify and quantify the sources of contamination. The metal bioaccessibility and estimated probabilistic (non)-carcinogenic risks to humans were also evaluated. Thirty-six dust samples were collected in the metropolitan region of Recife. Results showed that the traffic governed the distribution and accumulation of metals in street dust. Emissions from vehicles were the primary source (> 70 %) of heavy metals, except for Cd, which had a mixed origin (natural, traffic, and industrial). Moderate to heavy dust contamination by Ba, Cu, Mn, Pb, and Zn were found, with a very high potential ecological risk. The main exposure route depended on the metal. Barium, Cu, and Pb had ingestion rather than dermal contact as the main route of exposure, while inhalation and dermal contact posed the main risks to Mn and Cr, respectively. The risk for children was higher than for adults. The probabilities of unacceptable carcinogenic risk scenarios (TCRI >10-6) for children and adults were 27 and 4 %, respectively, with Cr being the most concerning metal for the health of the urban population.

Risk assessment of heavy metals in soils and edible parts of vegetables grown on sites contaminated by an abandoned steel plant in Havana.

Food production in areas contaminated by industrial wastes poses a serious risk to farmers and consumers. Here, we evaluate Cd, Cr, Ni, and Pb concentrations in the soils and the edible parts of lettuce, chives, tomatoes, pepper, and cassava plants grown by small farmers in areas contaminated by slag from an abandoned steel plant in Havana, Cuba. The total, environmentally available, and bioavailable concentrations of metals in the soils and the metals bioconcentration factor in the plants were determined. The risks to human health from food and soil ingestion were estimated. The total and environmentally available concentrations of Cd, Cr, and Pb were above values considered safe by international standards, with likely adverse effect on human health. Cadmium was the most bioavailable metal, reflected in the highest accumulation in the crops' edible parts. Even with negligible DTPA-available Cr concentrations in soils, the Cr concentrations in edible parts of the crops exceeded regulatory levels, suggesting that rhizosphere mechanisms may increase Cr availability. The consumption of vegetables represented 70% of the daily intake dose for Cr, Cd, and Ni, while accidental ingestion of contaminated soil is the predominant human exposure route for Pb. Our results demonstrated the health risks associated with cultivating and consuming vegetables grown on metal contaminated soils in Havana and can assist public policies capable of guaranteeing the sustainability of urban agriculture and food security.

Natural concentrations and reference values of heavy metals in sedimentary soils in the Brazilian Amazon.

The soils of the Brazilian Amazon exhibit large geochemical diversity reflecting the different soil formation processes in an area covering 49% of the Brazilian territory. Soil contamination by heavy metals is one of the threats to the sustainability of this Biome but establishing quality reference values (QRVs) for the region is a challenging owing to the immense territorial area of the Amazon. This study aimed to determine the natural background of heavy metals in soils from the southwestern Brazilian Amazon in order to propose QRVs for Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, and Zn for alluvial sedimentary soils. One hundred and twenty-eight soil samples were collected at a depth of 0.0-0.2 m in sites with minimal anthropogenic interference. Soil sample digestion was based on the EPA 3051A method and metal concentrations were determined by ICP-OES. QRVs calculated for the southwestern Brazilian Amazon are among the lowest recorded in Brazil (mg kg-1): Ba (16.5), Cd (0.1), Cr (6.9), Cu (2.8), Fe (15.4), Mn (13.4), Ni (1.7), Pb (4.4), Sb (0.9), and Zn (5.7). The low metal concentration is likely a result of the sedimentary origin of the soils. The results of this study can serve as a basis for defining public policies to investigate the environmental impacts resulting from changes in land use in areas of the Brazilian Amazon.