Reversible Molecular Conformation Transitions of Smectic Liquid Crystals for Light/Bias-Gated Transistor Memory.

In recent years, organic photonic field-effect transistors have made remarkable progress with the rapid development of conjugated polycrystalline materials. Liquid crystals, with their smooth surface, defined layer thickness, and crystalline structures, are commonly used for these advantages. In this work, a series of smectic liquid crystalline molecules, 2,9-didecyl-dinaphtho-thienothiophene (C10-DNTT), 2,7-didecyl-benzothieno-benzothiopene (C10-BTBT), 3,9-didecyl-dinaphtho-thiophene (C10-DNT), and didecyl-sexithiophene (C10-6T), have been used in photonic transistor memory, functioning as both hole-transport channels and electron traps to investigate systematically the reasons and mechanisms behind the memory behavior of smectic liquid crystals. After thermal annealing, C10-BTBT and C10-6T/C10-DNTT are homeotropically aligned from the smectic A and smectic X phases, respectively. The 3D-ordered structure of these smectic-aligned crystals contributed to efficient photowriting and electrical erasing processes. Among them, the device performance of C10-BTBT was particularly significant, with a memory window of 21 V. The memory ratio could reach 1.5 × 106 and maintain a memory ratio of over 3 orders after 10,000 s, contributing to its smectic A structure. Through the research, we confirmed the memory and light/bias-gated behaviors of these smectic liquid crystalline molecules, attributing them to reversible molecular conformation transitions and the inherent structural inhomogeneity inside the polycrystalline channel layer.

Combination of XEOL, TR-XEOL and HB-T interferometer at the TPS 23A X-ray nanoprobe for exploring quantum materials.

In this study, a combination of X-ray excited optical luminescence (XEOL), time-resolved XEOL (TR-XEOL) and the Hanbury-Brown and Twiss (HB-T) interferometer at the Taiwan Photon Source (TPS) 23A X-ray nanoprobe beamline for exploring quantum materials is demonstrated. On the basis of the excellent spatial resolution rendered using a nano-focused beam, emission distributions of artificial micro-diamonds can be obtained by XEOL maps, and featured emission peaks of a selected local area can be obtained by XEOL spectra. The hybrid bunch mode of the TPS not only provides a sufficiently high peak power density for experiments at each beamline but also permits high-quality temporal domain (∼200 ns) measurements for investigating luminescence dynamics. From TR-XEOL measurements, the decay lifetime of micro-diamonds is determined to be approximately 16 ns. Furthermore, the XEOL spectra of artificial micro-diamonds can be investigated by the HB-T interferometer to identify properties of single-photon sources. The unprecedented strategy of combining XEOL, TR-XEOL and the HB-T interferometer at the X-ray nanoprobe beamline will open new avenues with significant characterization abilities for unraveling the emission mechanisms of single-photon sources for quantum materials.

Enhancing the Performance of 2D Tin-Based Pure Red Perovskite Light-Emitting Diodes through the Synergistic Effect of Natural Antioxidants and Cyclic Molecular Additives.

Tin (Sn)-based perovskites are being investigated in many optoelectronic applications given their similar valence electron configuration to that of lead-based perovskites and the potential environmental hazards of lead-based perovskites. However, the formation of high-quality Sn-based perovskite films faces several challenges, mainly due to the easy oxidation of Sn2+ to Sn4+ and the fast crystallization rate. Here, to develop an environmentally friendly process for Sn-based perovskite fabrication, a series of natural antioxidants are studied as additives and ascorbic acid (VitC) is found to have a superior ability to inhibit the oxidation problem. A common cyclic molecule, 18-Crown-6, is further added as a second additive, which synergizes with VitC to significantly reduce the nonradiative recombination pathways in the PEA2 SnI4 film. This synergistic effect greatly improves the performance of 2D red Sn-based PeLED, with a maximum external quantum efficiency of 1.87% (≈9 times that of the pristine device), a purer color, and better bias stability. This work demonstrates the potential of the dual-additive approach in enhancing the performance of 2D Sn-based PeLEDs, while the use of these environmentally friendly additives contributes to their future sustainability.

Investigation of dynamical X-ray back diffraction at grazing incidence.

We report a theoretical investigation of X-ray back diffraction at grazing incidence. Based on the framework of the dynamical theory of X-ray diffraction, the grazing incidence for Si (12 4 0) back diffraction is taken as an example to resolve the eigenvalue problem inside the crystal. The dispersion surface and the resulting diffraction intensities are strongly affected by the miscut angle as well as the diffraction geometry of grazing incidence. The kinematical relationship between the incident angle and the miscut angle is well explained by Snell's law. While only the two-beam diffraction is considered, our treatment can be further extended to include the cases for multiple diffractions as well.

Hidden Hexavalent Chromium Ions with Subtle Structural Evolution in Near-Infrared Phosphors.

Cr-doped inorganic materials are pivotal in developing near-infrared optical materials; however, multivalent Cr ions and their respective distribution in the materials remain ambiguous. Herein, a series of Li(Sc1-xInx)O2:Cr phosphors containing both Cr3+/Cr6+ ions are prepared. High-resolution synchrotron X-ray diffraction (XRD) reveals two similar phases in Li(Sc1-xInx)O2. Raman spectra further confirm distinct scattering patterns for the two end-member compositions, corroborating the findings from the synchrotron XRD analysis. Cr K-edge X-ray absorption near-edge structure and extended X-ray absorption fine structure demonstrate that most Cr ions in the as-prepared samples are Cr6+, while Cr3+ becomes dominant after washing with water. Moreover, the source and distribution of Cr3+ and Cr6+ ions in the as-prepared and washed samples are revealed through X-ray fluorescence and X-ray excited optical luminescence techniques, which indicate that Cr6+ ions aggregate within the sample, while Cr3+ ions are evenly distributed. Photoluminescence, decay curves, and line shape analyses are implemented to resolve the electron-lattice interactions, and the corresponding mechanisms are provided to explain the asymmetry between photoluminescence and photoluminescence excitation spectra. Overall, this study provides valuable insights into the distribution of low-concentration multivalence ions in solid-state materials and offers a deeper understanding of the approaches to precisely resolve the subtle changes in the crystal structure.

Tailoring Wavelength-Adaptive Visual Neuroplasticity Transitions of Synaptic Transistors Comprising Rod-Coil Block Copolymers for Dual-Mode Photoswitchable Learning/Forgetting Neural Functions.

The vision-inspired artificial neural network based on optical synapses has drawn a tremendous amount of attention for emulating biological senses. Although photoexcitation-induced synaptic functionalities have been widely studied, optical habituation via the photoinhibitory pathway is yet to be demonstrated for sophisticated biomimetic visual adaptive systems. Here, the first optical neuromorphic block copolymer (BCP) phototransistor is demonstrated as an all-optical operation responding to various wavelengths, fulfilling photoassisted dynamic learning/forgetting cycles via optical potentiation without gate bias. The polyfluorene BCPs were precisely designed to enable wavelength-adaptive responses, benefiting from interfacial semiconductor/electret morphology and the crystallinity/electron affinity of the BCPs. Notably, this is the first work to simultaneously exhibit fully light-controlled short- and long-term memory based on organic material systems. The device presents a high current contrast above 100-fold and long-term retention over 104 s. As a proof-of-concept for neural networks, a 6 × 6 array of photosynapses performed outstanding visual pattern learning/forgetting with high accuracy. This study exploits the design strategy of a conjugated BCP electret to unleash the full potential of wavelength-adaptive visual neuroplasticity transitions. It provides an effective architecture for designing high-performance and high-storage capacity required applications in next-generation neuromorphic systems.

Controlled Growth of Highly Oriented Perovskite Crystals in Polymer Solutions via Selective Solvent Vapor Diffusion.

Organic-inorganic hybrid perovskites have garnered significant attention in optoelectronics owing to their outstanding tunable optical characteristics. Controlled growth of perovskite nanocrystals from solutions is key for controlling the emission intensity and photoluminescence lifetime of perovskites. In particular, most studies have focused on controlling the crystallization of perovskite through chemical treatment using chelating ligands or physical treatment via antisolvent diffusion, and there exists a trade-off between the photoluminescence intensity and lifetime of perovskites. Herein, a selective solvent vapor-assisted crystallization with the aid of a functional polymer, which nanoscale perovskite crystals are grown andante from precursor solution, is presented for tuning the crystallization and optical properties of a common halide perovskite, methylammonium lead bromide (MAPbBr3 ). The proposed method here produces perovskite nanocrystals in the range of 200-300 nm. The spin-coated thin film formed from the perovskite solution exhibits strong green photoluminescence with a long lifetime. The effects of the functional group and polymer dosage on the crystallization of MAPbBr3 are systematically investigated, and the crystallization mechanism is explained based on a modified LaMer model. This study provides an advanced solution process for precisely controlling perovskite crystallization to enhance their optical properties for next-generation optoelectronic devices.

Probing size-dependent defects in zinc oxide using synchrotron techniques: impact on photocatalytic efficiency.

In the present study, synchrotron-based X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and X-ray excited optical luminescence (XEOL) have been used to investigate the induced defect states in metal oxide nanomaterials. Specifically, two synthesis approaches have been followed to develop unique nano-sized peanut-shaped (N-ZnO) nanostructures and micron-sized hexagonal rods (M-ZnO). XANES analysis at the Zn K-edge revealed the presence of defect states with a divalent oxidation state of zinc (Zn2+) in a tetrahedral structure. Furthermore, XAS measurements performed at the Zn L3,2-edge and O K-edge confirm higher oxygen-related defects in M-ZnO, while N-ZnO appeared to have a higher concentration of surface defects due to size confinement. Moreover, the in-line XEOL and time dependent-XEOL measurements exposed the radiative excitonic recombination phenomena occurring in the band-tailing region as a function of absorption length, X-ray energy excitation, and time. Based on the chronology developed in the defect state improvement, a possible energy band diagram is proposed to accurately locate the defect states in the two systems. Furthermore, the increased absorption intensity at the Zn L3,2-edge and the O K-edge under the UV lamp suggests delayed recombination of electrons and holes, highlighting their potential use as photo catalysts. The photocatalytic activity degrading the rhodamine B dye established M-ZnO as a superior catalyst with a rapid degradation rate and significant mineralization. Overall, this work provides valuable insights into ZnO defect states and provides a foundation for efficient advanced materials for environmental or other optoelectronic applications.

Realizing High Brightness Quasi-2D Perovskite Light-Emitting Diodes with Reduced Efficiency Roll-Off via Multifunctional Interface Engineering.

Quasi-2D perovskites have recently flourished in the field of luminescence due to the quantum-confinement effect and the efficient energy transfer between different n phases resulting in exceptional optical properties. However, owing to the lower conductivity and poor charge injection, quasi-2D perovskite light-emitting diodes (PeLEDs) typically suffer from low brightness and high-efficiency roll-off at high current densities compared to 3D perovskite-based PeLEDs, which is undoubtedly one of the most critical issues in this field. In this work, quasi-2D PeLEDs with high brightness, reduced trap density, and low-efficiency roll-off are successfully demonstrated by introducing a thin layer of conductive phosphine oxide at the perovskite/electron transport layer interface. The results surprisingly show that this additional layer does not improve the energy transfer between multiple quasi-2D phases in the perovskite film, but purely improves the electronic properties of the perovskite interface. On the one hand, it passivates the surface defects of the perovskite film; on the other hand, it promotes electron injection and prevents hole leakage across this interface. As a result, the modified quasi-2D pure Cs-based device shows a maximum brightness of > 70,000 cd m-2 (twice that of the control device), a maximum external quantum efficiency (EQE) of > 10% and a much lower efficiency roll-off at high bias voltages.

High-Performance Phototransistor Memory with an Ultrahigh Memory Ratio Conferred Using Hydrogen-Bonded Supramolecular Electrets.

As the research of photonic electronics thrives, the enhanced efficacy from an optic unit cell can considerably improve the performance of an optoelectronic device. In this regard, organic phototransistor memory with a fast programming/readout and a distinguished memory ratio produces an advantageous outlook to fulfill the demand for advanced applications. In this study, a hydrogen-bonded supramolecular electret is introduced into the phototransistor memory, which comprises porphyrin dyes, meso-tetra(4-aminophenyl)porphine, meso-tetra(p-hydroxyphenyl)porphine, and meso-tetra(4-carboxyphenyl)porphine (TCPP), and insulated polymers, poly(4-vinylpyridine) and poly(4-vinylphenol) (PVPh). To combine the optical absorption of porphyrin dyes, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) is selected as a semiconducting channel. The porphyrin dyes serve as the ambipolar trapping moiety, while the insulated polymers form a barrier to stabilize the trapped charges by forming hydrogen-bonded supramolecules. We find that the hole-trapping capability of the device is determined by the electrostatic potential distribution in the supramolecules, whereas the electron-trapping capability and the surface proton doping originated from hydrogen bonding and interfacial interactions. Among them, PVPh:TCPP with an optimal hydrogen bonding pattern in the supramolecular electret produces the highest memory ratio of 1.12 × 108 over 104 s, which is the highest performance among the reported achievements. Our results suggest that the hydrogen-bonded supramolecular electret can enhance the memory performance by fine-tuning their bond strength and cast light on a potential pathway to future photonic electronics.

Performance Enhancement of Lead-Free 2D Tin Halide Perovskite Transistors by Surface Passivation and Its Impact on Non-Volatile Photomemory Characteristics.

Two-dimensional (2D) tin (Sn)-based perovskites have recently received increasing research attention for perovskite transistor application. Although some progress is made, Sn-based perovskites have long suffered from easy oxidation from Sn2+ to Sn4+ , leading to undesirable p-doping and instability. In this study, it is demonstrated that surface passivation by phenethylammonium iodide (PEAI) and 4-fluorophenethylammonium iodide (FPEAI) effectively passivates surface defects in 2D phenethylammonium tin iodide (PEA2 SnI4 ) films, increases the grain size by surface recrystallization, and p-dopes the PEA2 SnI4 film to form a better energy-level alignment with the electrodes and promote charge transport properties. As a result, the passivated devices exhibit better ambient and gate bias stability, improved photo-response, and higher mobility, for example, 2.96 cm2 V-1 s-1 for the FPEAI-passivated films-four times higher than the control film (0.76 cm2 V-1 s-1 ). In addition, these perovskite transistors display non-volatile photomemory characteristics and are used as perovskite-transistor-based memories. Although the reduction of surface defects in perovskite films results in reduced charge retention time due to lower trap density, these passivated devices with better photoresponse and air stability show promise for future photomemory applications.

Precise Sn-Doping Modulation for Optimizing CdWO4 Nanorod Photoluminescence.

The cadmium tungstate rods have been given much attention due to their potential for usage in numerous luminescent applications. We have prepared single crystalline Sn-doped Cd1-xSnxWO4 (where x = 0, 1, 3, and 5%) nanorods (NRDs) and characterized them using refined X-ray diffraction and TEM analysis, revealing a monoclinic phase and a crystallite size that decreased from 62 to 38 nm as Sn concentration increased. Precise Sn doping modulation in CdWO4 NRDs causes surface recombination of electrons and holes, which causes the PL intensity to decrease as the Sn content rises. The chromaticity diagram shows that an increase in the Sn content caused a change in the emission color from sky blue to light green, which was attributed to the increased defect density. The photoluminescence time decay curve of all samples fit well with double-order exponential decay, and the average decay lifetime was found to be 1.11, 0.93, and 1.16 ns for Cd1-xSnxWO4, x = 0, 1, and 5%, respectively. This work provides an understanding of the behavior of Sn-doped CdWO4 NRDs during electron transitions and the physical nature of emission that could be used in bio-imaging, light sources, displays, and other applications.

Regulating the phase distribution of quasi-2D perovskites using a three-dimensional cyclic molecule toward improved light-emitting performance.

In this study, a molecule with a three-dimensional (3D) cyclic structure, a cryptand, is demonstrated as an effective additive for the quasi-two-dimensional (quasi-2D) PEA2Csn-1PbnBr3n+1 (n = 3, herein) to improve its light-emitting performance. The cryptand can effectively regulate the phase distribution of the quasi-2D perovskite through its intense interaction with PbBr2, benefitting from its cage-like structure that can better capture the Pb2+ ions. Due to the inhibited growth of the low-n phases, a much-concentrated phase distribution is achieved for the cryptand-containing films. Moreover, its constituent O/N atoms can passivate the uncoordinated Pb2+ ions to improve the film quality. Such a synergistic effect thereby facilitates the charge/energy transfer among the multiple phases and reduces the non-radiative recombination. As a result, the quasi-2D perovskite light-emitting diode (PeLED) with the optimized cryptand doping ratio is shown to deliver the highest luminance (Lmax) of 15 532 cd m-2 with a highest external quantum efficiency (EQE) of 4.02%. Compared to the pristine device, Lmax is enhanced by ∼5 times and EQE is enhanced by ∼10 times.

Effect of Ag-Decorated BiVO4 on Photoelectrochemical Water Splitting: An X-ray Absorption Spectroscopic Investigation.

Bismuth vanadate (BiVO4) has attracted substantial attention on account of its usefulness in producing hydrogen by photoelectrochemical (PEC) water splitting. The exploitation of BiVO4 for this purpose is yet limited by severe charge recombination in the bulk of BiVO4, which is caused by the short diffusion length of the photoexcited charge carriers and inefficient charge separation. Enormous effort has been made to improve the photocurrent density and solar-to-hydrogen conversion efficiency of BiVO4. This study demonstrates that modulating the composition of the electrode and the electronic configuration of BiVO4 by decoration with silver nanoparticles (Ag NPs) is effective in not only enhancing the charge carrier concentration but also suppressing charge recombination in the solar water splitting process. Decoration with a small number of Ag NPs significantly enhances the photocurrent density of BiVO4 to an extent that increases with the concentration of the Ag NPs. At 0.5% Ag NPs, the photocurrent density approaches 4.1 mA cm-2 at 1.23 V versus a reversible hydrogen electrode (RHE) under solar simulated light illumination; this value is much higher than the 2.3 mA cm-2 of pure BiVO4 under the same conditions. X-ray absorption spectroscopy (XAS) is utilized to investigate the electronic structure of pure BiVO4 and its modification by decoration with Ag NPs. Analytical results indicate that increased distortion of the VO4 tetrahedra alters the V 3d-O 2p hybridized states. Additionally, as the Ag concentration increases, the oxygen vacancy defects that act as recombination centers in BiVO4 are reduced. In situ XAS, which is conducted under dark and solar illumination conditions, reveals that the significantly enhanced PEC performance is attributable to the synergy of modulated atomic/electronic structures and the localized surface plasmon resonance effect of the Ag nanoparticles.

Synthesis and characterization of a near-infrared persistent luminescent Cr-doped zinc gallate-calcium phosphate composite.

Near-infrared (NIR)-emitting persistent luminescence (PersL) nanoparticles have attracted great attention as a novel optical probe for bioimaging and biosensing applications. These nanoparticles emit long-lasting luminescence after the removal of the excitation source, which effectively eliminates the interference from tissue autofluorescence. Cr-doped zinc gallate (ZnGa2O4:Cr3+, CZGO) is a representative NIR-emitting PersL material. On the other hand, amorphous calcium phosphate (ACP) is a widely used drug carrier due to its high biocompatibility. In this work, we present a design of an ACP-based drug carrier with PersL properties, by forming a CZGO-ACP composite. The PersL properties of CZGO were preserved by composite formation, while it is found that the Zn2+ could migrate from CZGO to ACP during composite formation, leading to different luminescence mechanisms between pure CZGO and the CZGO-ACP composite. The electronic structure of the composite was analyzed by synchrotron X-ray absorption spectroscopy, and a structure-luminescence correlation was proposed.

Insights to the 3D internal morphology and metal oxidation states of single atmospheric aerosol particles by synchrotron-based methodology.

The morphology and metal oxidation states of atmospheric aerosols are pertinent to their formation processes and ensuing interactions with surrounding gases, vapors and other environments upon deposition, such as human respiratory tract, soil and water. Although much progress has been made in recent years through single-particle techniques, considerably less is known with respect to the three-dimensional (3D) internal morphology of single atmospheric aerosol particles due to the limited penetration depth of electron microscopy. In this study, for the first time, a novel synchrotron-based transmission X-ray microscopy (TXM) methodology has been developed to visualize the 3D internal chemical mixing state and structure of single particles. The results show that the TXM is more applicable to the imaging of solid particles containing high-density elements, e.g., iron (Fe), aluminum (Al), silicone (Si), carbon (C) and sulfur (S), and/or solid particles of sizes larger than about 100 nm. In addition, the TXM is capable to reveal the fine 3D topographic features of single particles. The derived 3D internal and external information would be difficult to discern in the 2D images from electron microscopy. The TXM 3D images illustrate that aerosol particles exhibit complex internal mixing state and structure, e.g., homogeneously-, heterogeneously-mixed, multiple inclusions, fibrous, porous, and core-shell configuration. When coupled with the synchrotron-based X-ray fluorescence spectrometry (XRF) and absorption near-edge spectroscopy (XANES) of an X-ray nanoprobe in the energy range of 4-15 keV, the 3D morphology of single particles is further supplemented with the spatial distribution and oxidation sates of selected elements, including Fe, vanadium (V), manganese (Mn), chromium (Cr) and arsenic (As). The presented cross-platform, synchrotron-based methodology shows promise in complementing existing single-particle techniques and providing new insights to the heterogeneity of single-particle micro-physicochemical states relevant to the aerosol chemistry, optical properties, and their environmental and health impacts.

Studies of high-membered two-dimensional Ruddlesden-Popper Cs7Pb6I19 perovskite nanosheets via kinetically controlled reactions.

Two-dimensional (2D) all-inorganic Ruddlesden-Popper (RP) perovskite Cs7Pb6I19 nanosheets (NSs) were successfully developed for the first time by employing a structural recrystallization process with additional passivation of small organic sulfide molecules. The structure of Cs7Pb6I19 NSs is confirmed by powder X-ray diffraction measurements, atomically-resolved STEM measurements and atomic force microscopy (AFM) studies. Cs7Pb6I19 NSs with a specific n value of 6 exhibits unique absorption and emission spectra with intense excitons at 560 nm due to quantum confinement effects in 2D perovskite slabs. The formation mechanisms of 2D Cs7Pb6I19 NSs and 3D γ-CsPbI3 phases were investigated by in situ photoluminescence (PL) spectroscopy and the activation energies of their formation reactions were calculated to be 151 kJ mol-1 and 95.3 kJ mol-1, respectively. The phase stability of 2D Cs7Pb6I19 NSs can be maintained at temperatures below 14 °C for more than 4 weeks. The overall results indicate that 2D Cs7Pb6I19 NSs demonstrate unique optical properties and structural stability compared with other 3D perovskite materials. We have opened a new path to the future discovery of 2D perovskite structures with metastable phases by using this recrystallization method and the assistance of sulfur-derived organic molecules.

Fast Photoresponsive Phototransistor Memory Using Star-Shaped Conjugated Rod-Coil Molecules as a Floating Gate.

With the explosive growth in data generation, photomemory capable of multibit data storage is highly desired to enhance the capacity of storage media. To improve the performance of phototransistor memory, an organic-molecule-based electret with an elaborate nanostructure is of great importance because it can enable multibit data storage in a memory device with high stability. In this study, a series of star-shaped rod-coil molecules consisting of perylenediimide (PDI) and biobased solanesol were synthesized in two-armed (PDI-Sol2), four-armed (PDI-Sol4), and six-armed (PDI-Sol6) architectures. Their molecular architecture-morphology relationships were investigated, and phototransistor memory was fabricated and characterized to evaluate the structure-performance relationship of these rod-coil molecules. Accordingly, the memory devices were enabled by photowriting with panchromatic light (405-650 nm) and electrical erasing using a gate bias. The PDI-Sol4-based memory device showed high memory ratios of 10 000 over 10 000 s and a rapid multilevel photoresponse of 50 ms. This achievement is related to the favorable energy-level alignment, isolated nanostructure, and face-on orientation of PDI-Sol4, which eliminated the charge tunneling barrier. The results of this study provide a new strategy for tailoring nanostructures in organic-molecule-based electrets by using a star-shaped rod-coil architecture for high-performance phototransistor memory.

Visualizing the valence states of europium ions in Eu-doped BaAl2O4 using X-ray nanoprobe mapping.

This study develops and successfully demonstrates visualization methods for the characterization of europium (Eu)-doped BaAl2O4 phosphors using X-ray nanoprobe techniques. X-ray fluorescence (XRF) mapping not only gives information on the elemental distributions but also clearly reveals the valence state distributions of the Eu2+ and Eu3+ ions. The accuracy of the estimated valence state distributions was examined by performing X-ray absorption spectroscopy (XAS) across the Eu L3-edge (6.977 keV). The X-ray excited optical luminescence (XEOL) spectra exhibit different emission lines in the selected local areas. Their corresponding emission distributions can be obtained via XEOL mapping. The emission properties can be understood through correlation analysis. The results demonstrate that the main contribution to the luminescence intensity of the Eu-doped BaAl2O4 comes from the Eu2+ activator and the emission intensity will not be influenced by the concentration of Eu2+ or Eu3+ ions. It is anticipated that X-ray nanoprobes will open new avenues with significant characterization ability for unravelling the emission mechanisms of phosphor materials.

Enhancing the Performance of Quasi-2D Perovskite Light-Emitting Diodes Using Natural Cyclic Molecules with Distinct Phase Regulation Behaviors.

In this study, two natural small molecules, α-cyclodextrin (α-CD) and ß-cyclodextrin (ß-CD), are used as additives to improve the performance of quasi-2D PEA2Csn-1PbnBr3n+1 (n = 3, herein) PeLEDs. Both of them are shown to efficiently passivate the quasi-2D perovskite films to afford improved film quality and morphology, but they exhibit distinct phase regulation behaviors possibly due to their different pore sizes. It reveals that α-CD effectively suppresses the formation of the low-n phases (n ≤ 2), while ß-CD better regulates the phase with a medium-n value (n = 3). Because of effectively suppressing the formation of low-n phases, the CD-assisted quasi-2D perovskite films possess facilitated exciton energy transfer and reduced nonradiative recombination. Consequently, the optimized α-CD-derived PeLED shows the highest luminance (Lmax) of 37,825 cd/m2 with an external quantum efficiency (EQE) of 3.81%, while the ß-CD-derived PeLED delivers a lower Lmax of 24,793 cd/m2 with an EQE of 3.09%. Compared to the pristine device, Lmax is enhanced by 6.3 and 3.8 times for α-CD- and ß-CD-based PeLEDs, respectively, and EQE is enhanced by ∼4.8 times for both devices; besides, both CD-assisted devices also exhibit improved color purity and a lower bias dependency of electroluminescent intensity.