Examining the Effects of Monomer and Catalyst Structure on the Mechanism of Ruthenium-Catalyzed Ring-Opening Metathesis Polymerization.

The mechanism of Ru-catalyzed ring-opening metathesis polymerization (ROMP) is studied in detail using a pair of third generation ruthenium catalysts with varying sterics of the N-heterocyclic carbene (NHC) ligand. Experimental evidence for polymer chelation to the Ru center is presented in support of a monomer-dependent mechanism for polymerization of norbornene monomers using these fast-initiating catalysts. A series of kinetic experiments, including rate measurements for ROMP, rate measurements for initiation, monomer-dependent kinetic isotope effects, and activation parameters were useful for distinguishing chelating and nonchelating monomers and determining the effect of chelation on the polymerization mechanism. The formation of a chelated metallacycle is enforced by both the steric bulk of the NHC and by the geometry of the monomer, leading to a ground-state stabilization that slows the rate of polymerization and also alters the reactivity of the propagating Ru center toward different monomers in copolymerizations. The results presented here add to the body of mechanistic work for olefin metathesis and may inform the continued design of catalysts for ROMP to access new polymer architectures and materials.

Disentangling Ligand Effects on Metathesis Catalyst Activity: Experimental and Computational Studies of Ruthenium-Aminophosphine Complexes.

Second-generation ruthenium olefin metathesis catalysts bearing aminophosphine ligands were investigated with systematic variation of the ligand structure. The rates of phosphine dissociation ( k1; initiation rate) and relative phosphine reassociation ( k-1) were determined for two series of catalysts bearing cyclohexyl(morpholino)phosphine and cyclohexyl(piperidino)phosphine ligands. In both cases, incorporating P-N bonds into the architecture of the dissociating phosphine accelerates catalyst initiation relative to the parent [Ru]-PCy3 complex; however, this effect is muted for the tris(amino)phosphine-ligated complexes, which exhibit higher ligand binding constants in comparison to those with phosphines containing one or two cyclohexyl substituents. These results, along with X-ray crystallographic data and DFT calculations, were used to understand the influence of ligand structure on catalyst activity. Especially noteworthy is the application of phosphines containing incongruent substituents (PR1R'2); detailed analyses of factors affecting ligand dissociation, including steric effects, inductive effects, and ligand conformation, are presented. Computational studies of the reaction coordinate for ligand dissociation reveal that ligand conformational changes contribute to the rapid dissociation for the fastest-initiating catalyst of these series, which bears a cyclohexyl-bis(morpholino)phosphine ligand. Furthermore, the effect of amine incorporation was examined in the context of ring-opening metathesis polymerization, and reaction rates were found to correlate well with catalyst initiation rates. The combined experimental and computational studies presented in this report reveal important considerations for designing efficient ruthenium olefin metathesis catalysts.

The perioperative outcomes between renal hilar and non-hilar tumors following robotic-assisted partial nephrectomy (RAPN).

BACKGROUND: The aim of this study was to compare the perioperative outcomes between renal hilar tumors and non-hilar tumors after robotic-assisted partial nephrectomy (RAPN). METHODS: A retrospective review of consecutive patients who underwent RAPN from December 2009 to September 2015 at our institution was recruited. Perioperative outcomes including demographic characteristics, perioperative, pathological and renal function outcomes were compared between the hilar group (n = 30) and non-hilar group (n = 170). RESULTS: In characteristics, hilar group was younger (52.4 vs. 58 years, p = 0.04) and had less body mass index (23.7 vs. 25.4 kg/m2, p = 0.018). Hilar group had larger tumor size (4.8 vs. 3.7 cm, p = 0.009), higher Preoperative Aspects and Dimensions Used for an Anatomical (PADUA) score (10.7 vs. 8.5, p < 0.001) and higher RENAL (radius, exophytic/endophytic properties of the tumor, nearness of tumor deepest portion to the collecting system or sinus, anterior/posterior description and the location relative to polar lines) score (9.0 vs. 7.4, p < 0.001). Hilar tumor was associated with longer operative time (293.6 vs. 240.5 min, p = 0.001) and warm ischemia time (39.9 vs. 21.8 min, p < 0.001). But there was no statistically difference in estimated blood loss (EBL), postoperative stay and complication rate. For pathological outcomes, there was no difference of positive margin rate and pathological T stage between these groups. For renal function outcomes, hilar tumor patients had no difference of the change of creatinine and estimated glomerular filtration rate (eGFR) at postoperative 6 and 12 month as compared with non-hilar tumor patients. CONCLUSION: For renal hilar tumor, RAPN could provide acceptable results of perioperative, pathological and renal function outcome as compared with non-hilar tumor group. Thus RAPN is a safe and effective nephron-sparing surgery technique for renal hilar tumors.

Consequences of Grafting Density on the Linear Viscoelastic Behavior of Graft Polymers.

The linear viscoelastic behavior of poly(norbornene)-graft-poly(±-lactide) was investigated as a function of grafting density and overall molar mass. Eight sets of polymers with grafting densities ranging from 0 to 100% were synthesized by living ring-opening metathesis copolymerization. Within each set, the graft chain molar mass and spacing between grafts were fixed, while the total backbone length was varied. Dynamic master curves reveal that these polymers display Rouse and reptation dynamics with a sharp transition in the zero-shear viscosity data, demonstrating that grafting density strongly impacts the entanglement molar mass. The entanglement modulus (Ge) scales with inverse grafting density (ng) as Ge ∼ ng1.2 and Ge ∼ ng0 in accordance with scaling theory in the high and low grafting density limits, respectively. However, a sharp transition between these limiting behaviors occurs, which does not conform to existing theoretical models for graft polymers. A molecular interpretation based on thin flexible chains at low grafting density and thick semiflexible chains at high grafting density anticipates the sharp transition between the limiting dynamical regimes.

Design, Synthesis, and Self-Assembly of Polymers with Tailored Graft Distributions.

Grafting density and graft distribution impact the chain dimensions and physical properties of polymers. However, achieving precise control over these structural parameters presents long-standing synthetic challenges. In this report, we introduce a versatile strategy to synthesize polymers with tailored architectures via grafting-through ring-opening metathesis polymerization (ROMP). One-pot copolymerization of an ω-norbornenyl macromonomer and a discrete norbornenyl comonomer (diluent) provides opportunities to control the backbone sequence and therefore the side chain distribution. Toward sequence control, the homopolymerization kinetics of 23 diluents were studied, representing diverse variations in the stereochemistry, anchor groups, and substituents. These modifications tuned the homopolymerization rate constants over 2 orders of magnitude (0.36 M-1 s-1 < khomo < 82 M-1 s-1). Rate trends were identified and elucidated by complementary mechanistic and density functional theory (DFT) studies. Building on this foundation, complex architectures were achieved through copolymerizations of selected diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromonomer. The cross-propagation rate constants were obtained by nonlinear least-squares fitting of the instantaneous comonomer concentrations according to the Mayo-Lewis terminal model. In-depth kinetic analyses indicate a wide range of accessible macromonomer/diluent reactivity ratios (0.08 < r1/r2 < 20), corresponding to blocky, gradient, or random backbone sequences. We further demonstrated the versatility of this copolymerization approach by synthesizing AB graft diblock polymers with tapered, uniform, and inverse-tapered molecular "shapes." Small-angle X-ray scattering analysis of the self-assembled structures illustrates effects of the graft distribution on the domain spacing and backbone conformation. Collectively, the insights provided herein into the ROMP mechanism, monomer design, and homo- and copolymerization rate trends offer a general strategy for the design and synthesis of graft polymers with arbitrary architectures. Controlled copolymerization therefore expands the parameter space for molecular and materials design.

Effects of Grafting Density on Block Polymer Self-Assembly: From Linear to Bottlebrush.

Grafting density is an important structural parameter that exerts significant influences over the physical properties of architecturally complex polymers. In this report, the physical consequences of varying the grafting density (z) were studied in the context of block polymer self-assembly. Well-defined block polymers spanning the linear, comb, and bottlebrush regimes (0 ≤ z ≤ 1) were prepared via grafting-through ring-opening-metathesis polymerization. ω-Norbornenyl poly(d,l-lactide) and polystyrene macromonomers were copolymerized with discrete comonomers in different feed ratios, enabling precise control over both the grafting density and molecular weight. Small-angle X-ray scattering experiments demonstrate that these graft block polymers self-assemble into long-range-ordered lamellar structures. For 17 series of block polymers with variable z, the scaling of the lamellar period with the total backbone degree of polymerization (d* ∼ Nbbα) was studied. The scaling exponent α monotonically decreases with decreasing z and exhibits an apparent transition at z ≈ 0.2, suggesting significant changes in the chain conformations. Comparison of two block polymer systems, one that is strongly segregated for all z (System I) and one that experiences weak segregation at low z (System II), indicates that the observed trends are primarily caused by the polymer architectures, not segregation effects. A model is proposed in which the characteristic ratio (C∞), a proxy for the backbone stiffness, scales with Nbb as a function of the grafting density: C∞ ∼ Nbbf(z). The scaling behavior disclosed herein provides valuable insights into conformational changes with grafting density, thus introducing opportunities for block polymer and material design.

Control of Grafting Density and Distribution in Graft Polymers by Living Ring-Opening Metathesis Copolymerization.

Control over polymer sequence and architecture is crucial to both understanding structure-property relationships and designing functional materials. In pursuit of these goals, we developed a new synthetic approach that enables facile manipulation of the density and distribution of grafts in polymers via living ring-opening metathesis polymerization (ROMP). Discrete endo,exo-norbornenyl dialkylesters (dimethyl DME, diethyl DEE, di-n-butyl DBE) were strategically designed to copolymerize with a norbornene-functionalized polystyrene (PS), polylactide (PLA), or polydimethylsiloxane (PDMS) macromonomer mediated by the third-generation metathesis catalyst (G3). The small-molecule diesters act as diluents that increase the average distance between grafted side chains, generating polymers with variable grafting density. The grafting density (number of side chains/number of norbornene backbone repeats) could be straightforwardly controlled by the macromonomer/diluent feed ratio. To gain insight into the copolymer sequence and architecture, self-propagation and cross-propagation rate constants were determined according to a terminal copolymerization model. These kinetic analyses suggest that copolymerizing a macromonomer/diluent pair with evenly matched self-propagation rate constants favors randomly distributed side chains. As the disparity between macromonomer and diluent homopolymerization rates increases, the reactivity ratios depart from unity, leading to an increase in gradient tendency. To demonstrate the effectiveness of our method, an array of monodisperse polymers (PLAx-ran-DME1-x)n bearing variable grafting densities (x = 1.0, 0.75, 0.5, 0.25) and total backbone degrees of polymerization (n = 167, 133, 100, 67, 33) were synthesized. The approach disclosed in this work therefore constitutes a powerful strategy for the synthesis of polymers spanning the linear-to-bottlebrush regimes with controlled grafting density and side chain distribution, molecular attributes that dictate micro- and macroscopic properties.

Standardized analysis of laparoscopic and robotic-assisted partial nephrectomy complications with Clavien classification.

BACKGROUND: Laparoscopic partial nephrectomy (LPN) and robotic-assisted partial nephrectomy (RPN) are accepted as alternatives of open partial nephrectomy for managing renal tumors. However, LPN and RPN are technically challenging procedures. This report analyzed, according to the Clavien classification, the complications after LPN and RPN. METHODS: We analyzed consecutive LPN (n = 85) and RPN (n = 93) cases at our institution between April 1994 and December 2012. The data were retrospectively reviewed from a prospectively collected database. All complications that occurred within 3 months postoperatively were recorded and classified according to the modified Clavien classification system. RESULTS: The mean tumor size was 3.90 ± 1.77 cm. The mean operative time was 255.0 ± 83.5 minutes, and the mean warm ischemia time was 31.6 ± 22.0 minutes. The overall complication rate was 18.5%. Clavien Grades I, II, IIIa, and IIIb complications accounted for 3.93%, 11.2%, 2.81%, and 1.69% of patients, respectively. The most common complication was perioperative hemorrhage that required blood transfusion. Delayed bleeding occurred in seven patients, and four patients underwent angiographic embolization. The proportions of intermediate and high PADUA (Preoperative Aspects and Dimensions Used for an Anatomical) score (≥ 8) and RENAL (Radius/Exophytic/Nearness to collecting system/Anterior/Location) score (≥ 7) were 70.8% and 74.2%, respectively. A higher PADUA or RENAL score was associated with a significantly greater complication rate (p = 0.024 and p = 0.02, respectively). CONCLUSION: The overall complication rate in the present study was comparable to that reported in previous studies, although our patients had a larger mean tumor size and higher-complexity procedures.

Boryl-metal bonds facilitate cobalt/nickel-catalyzed olefin hydrogenation.

New approaches toward the generation of late first-row metal catalysts that efficiently facilitate two-electron reductive transformations (e.g., hydrogenation) more typical of noble-metal catalysts is an important goal. Herein we describe the synthesis of a structurally unusual S = 1 bimetallic Co complex, [((Cy)PBP)CoH]2 (1), supported by bis(phosphino)boryl and bis(phosphino)hydridoborane ligands. This complex reacts reversibly with a second equivalent of H2 (1 atm) and serves as an olefin hydrogenation catalyst under mild conditions (room temperature, 1 atm H2). A bimetallic Co species is invoked in the rate-determining step of the catalysis according to kinetic studies. A structurally related Ni(I)Ni(I) dimer, [((Ph)PBP)Ni]2 (3), has also been prepared. Like Co catalyst 1, Ni complex 3 displays reversible reactivity toward H2, affording the bimetallic complex [((Ph)PBHP)NiH]2 (4). This reversible behavior is unprecedented for Ni(I) species and is attributed to the presence of a boryl-Ni bond. Lastly, a series of monomeric ((tBu)PBP)NiX complexes (X = Cl (5), OTf (6), H (7), OC(H)O (8)) have been prepared. The complex ((tBu)PBP)NiH (7) shows enhanced catalytic olefin hydrogenation activity when directly compared with its isoelectronic/isostructural analogues where the boryl unit is substituted by a phenyl or amine donor, a phenomenon that we posit is related to the strong trans influence exerted by the boryl ligand.

A d(10) Ni-(H(2)) adduct as an intermediate in H-H oxidative addition across a Ni-B bond.

Bifunctional EH activation offers a promising approach for the design of two-electron-reduction catalysts with late first-row metals, such as Ni. To this end, we have been pursuing H2 activation reactions at late-metal boratranes and herein describe a diphosphine-borane-supported Ni-(H2 ) complex, [((Ph) DPB(iPr) )Ni(H2 )], which has been characterized in solution. (1) H NMR spectroscopy confirms the presence of an intact H2 ligand. A range of data, including electronic-structure calculations, suggests a d(10) configuration for [((Ph) DPB(iPr) )Ni(H2 )] as most appropriate. Such a configuration is highly unusual among transition-metal H2 adducts. The nonclassical H2 adduct is an intermediate in the complete activation of H2 across the NiB interaction. Reaction-coordinate analysis suggests synergistic activation of the H2 ligand by both the Ni and B centers of the nickel boratrane subunit, thus highlighting an important role of the borane ligand both in stabilizing the d(10) Ni-(H2 ) interaction and in the H-H cleavage step.

Boryl-mediated reversible H2 activation at cobalt: catalytic hydrogenation, dehydrogenation, and transfer hydrogenation.

We describe the synthesis of a cobalt(I)-N2 complex (2) supported by a meridional bis-phosphino-boryl (PBP) ligand. Complex 2 undergoes a clean reaction with 2 equiv of dihydrogen to afford a dihydridoboratocobalt dihydride (3). The ability of boron to switch between a boryl and a dihydridoborate conformation makes possible the reversible conversion of 2 and 3. Complex 3 reacts with HMe2N-BH3 to give a hydridoborane cobalt tetrahydridoborate complex. We explore this boryl-cobalt system in the context of catalytic olefin hydrogenation as well as amine-borane dehydrogenation/transfer hydrogenation.

Lewis acid-assisted isotopic 18F-19F exchange in BODIPY dyes: facile generation of positron emission tomography/fluorescence dual modality agents for tumor imaging.

Positron emission tomography (PET) is a powerful technique for imaging biological pathways in vivo, particularly those that are key targets in disease processes. In contrast, fluorescence imaging has demonstrated to be a superior method for image-guided surgery, such as tumor removal. Although the integration of PET and optical imaging could provide an attractive strategy for patient management, there is a significant shortage of established platforms/methods for PET/optical probe construction. In this study, various reaction conditions were explored to develop a simple and fast method allowing for the introduction of [(18)F]-fluoride into BODIPY dyes. Through a systematic optimization of the reaction conditions, we found that BODIPY dyes, including commercial amine-reactive BODIPY succinimidyl esters, may be converted into their radioactive analogues in the matter of minutes via a (18)F-(19)F isotopic exchange reaction promoted by a Lewis acid such as SnCl4. An integrin-targeting RGD peptide was also conjugated with [(18)F]BODIPY® R6G , derived from the commercially available BODIPY® R6G fluorescent tag, to provide a [(18)F]-RGD conjugate in 82% yield. In vivo evaluation of this imaging probe showed a discernible tumor uptake in the U87MG xenograft model. The dual modality imaging properties of the probe was confirmed by ex vivo fluorescence and microPET imaging experiments. In summary, in the matter of minutes, BODIPY dyes were converted into their "hot" radioactive analogues via a (18)F-(19)F isotopic exchange reaction promoted by a Lewis acid. This approach, which can be applied to commercial BODIPY dyes, provides easy access to positron emission tomography/fluorescence dual modality imaging agents.

Two-electron redox chemistry at the dinuclear core of a TePt platform: chlorine photoreductive elimination and isolation of a Te(V)Pt(I) complex.

As part of our interest in novel redox-active main group/transition metal platforms for energy applications, we have synthesized the chloride salt of [Te(III)Pt(I)Cl(o-dppp)(2)](+) ([1](+), o-dppp = o-(Ph(2)P)C(6)H(4)) by reaction of the new bis(phosphino) telluroether (o-(Ph(2)P)C(6)H(4))(2)Te with (Et(2)S)(2)PtCl(2). Complex [1](+) is chemically robust and undergoes a clean two-electron oxidation reaction in the presence of PhICl(2) to afford ClTe(III)Pt(III)Cl(3)(o-dppp)(2) (2), a complex combining a hypervalent four-coordinate tellurium atom and an octahedral platinum center. While the Te-Pt bond length is only slightly affected by the oxidation state of the TePt platform, DFT and NBO calculations show that this central linkage undergoes an umpolung from Te→Pt in [1](+) to Te←Pt in 2. This umpolung signals an increase in the electron releasing ability of the tellurium center upon switching from an eight-electron configuration in [1](+) to a hypervalent configuration in 2. Remarkably, the two-electron redox chemistry displayed by this new dinuclear platform is reversible as shown by the photoreductive elimination of a Cl(2) equivalent when 2 is irradiated at 350 nm in the presence of a radical trap such as 2,3-dimethyl-1,3-butadiene. This photoreductive elimination, which affords [1][Cl] with a maximum quantum yield of 4.4%, shows that main group/late transition metal complexes can mimic the behavior of their transition metal-only analogues and, in particular, undergo halogen photoelimination from the oxidized state. A last notable outcome of this study is the isolation and characterization of F(MeO)(2)Te(V)Pt(I)Cl(o-dppp)(2) (4), the first metalated hexavalent tellurium compound, which is formed by reaction of 2 with KF in the presence of MeOH.

σ-Accepting properties of a chlorobismuthine ligand.

BiZness as usual? Not exactly! The bismuth atom of the tridentate diphosphinobismuthine (o-(Ph(2)P)C(6)H(4))(2) BiCl behaves as a Z rather than L ligand when in the coordination sphere of late transition metals such as gold. The σ-acceptor behavior of Bi is supported by its disphenoid coordination geometry and theoretical studies, which show a Au→Bi interaction.

Rapid aqueous [18F]-labeling of a bodipy dye for positron emission tomography/fluorescence dual modality imaging.

We report the rapid nucleophilic [(18)F]-radiolabeling of a bodipy dye in aqueous solutions. This radiolabeled dye, whose biodistribution and clearance has been studied in mice, is stable in vivo and can be used as a positron emission tomography/fluorescence dual modality imaging agent.

Synthesis, structure, and properties of a T-shaped 14-electron stiboranyl-gold complex.

A cyclic stiboranyl-gold complex (1) supported by two 1,8-naphthalenediyl linkers has been synthesized and structurally characterized. The gold atom of this complex adopts a T-shaped geometry and is separated from the antimony center by only 2.76 Å. Surprisingly, the trivalent gold atom of this complex is involved in an aurophilic interaction, a phenomenon typically only observed for monovalent gold complexes. This phenomenon indicates that the stiboranyl ligand possesses strong σ-donating properties making the trivalent gold atom of 1 electron rich. This view is supported by DFT calculations as well as Au L(3)- and Sb K-edge XANES spectra which reveal that 1 may also be described as an aurate-stibonium derivative. In agreement with this view, complex 1 shows no reactivity toward the halides Cl(-), Br(-), and I(-). It does, however, rapidly react with F(-) to form an unprecedented anionic aurate fluorostiborane complex ([2](-)) which has been isolated as the tetra-n-butylammonium salt. The increased coordination number of the antimony center in this anionic complex ([2](-)) does not notably affect the Au-Sb separation (2.77 Å) or the geometry at the gold atom which remains T-shaped.