RESUMO
Global warming, driven by the accumulation of anthropogenic greenhouse gases, particularly CO2, in the atmosphere, has garnered significant attention due to its detrimental environmental impacts. To combat this critical issue, the deployment of CO2 capture and utilization (CCU) strategies has been considered as one of the technology-based solutions, leading to extensive scientific and engineering research. Electrochemical pH-swing (EPS) processes offer a promising approach to diverse CCU pathways, such as the delivery of pure CO2 gas, the delivery of bicarbonate (e.g., for microalgae cultivation), and the formation of carbonate minerals. In this study, we discuss several CCU pathways using EPS and provide an in-depth analysis of its mechanisms and potential applications, outlining its limitations from both thermodynamic and kinetic standpoints. The EPS process has demonstrated remarkable capabilities, achieving a CO2 capture efficiency of over 90% and unlocking valuable opportunities for CCU applications. We also develop an initial techno-economic assessment and provide the perspectives and challenges for future development and deployment of EPS. This study sheds light on the integration of EPS with CCU, closing the carbon cycle by effectively utilizing the products generated through the process, such as carbonate minerals and bicarbonate solution. For instance, the bicarbonate product can serve as a viable feedstock for bicarbonate-based microalgae production systems, with the added benefit of reducing costs by 40-80% compared to traditional gaseous CO2 delivery approaches. By integration of electrochemical technologies with CCU methods, this study underscores the immense potential for mitigating CO2 emissions and advancing sustainable practices to combat global warming. This study not only addresses the urgent need for effective solutions but also paves the way for a greener and more sustainable future.
RESUMO
Due to the growing and diverse demands on water supply, exploitation of non-conventional sources of water has received much attention. Since water consumption for irrigation is the major contributor to total water withdrawal, the utilization of non-conventional sources of water for the purpose of irrigation is critical to assuring the sustainability of water resources. Although numerous studies have been conducted to evaluate and manage non-conventional water sources, little research has reviewed the suitability of available water technologies for improving water quality, so that water reclaimed from non-conventional supplies could be an alternative water resource for irrigation. This article provides a systematic overview of all aspects of regulation, technology and management to enable the innovative technology, thereby promoting and facilitating the reuse of non-conventional water. The study first reviews the requirements for water quantity and quality (i.e., physical, chemical, and biological parameters) for agricultural irrigation. Five candidate sources of non-conventional water were evaluated in terms of quantity and quality, namely rainfall/stormwater runoff, industrial cooling water, hydraulic fracturing wastewater, process wastewater, and domestic sewage. Water quality issues, such as suspended solids, biochemical/chemical oxygen demand, total dissolved solids, total nitrogen, bacteria, and emerging contaminates, were assessed. Available technologies for improving the quality of non-conventional water were comprehensively investigated. The potential risks to plants, human health, and the environment posed by non-conventional water reuse for irrigation are also discussed. Lastly, three priority research directions, including efficient collection of non-conventional water, design of fit-for-purpose treatment, and deployment of energy-efficient processes, were proposed to provide guidance on the potential for future research.
Assuntos
Eliminação de Resíduos Líquidos , Água , Irrigação Agrícola , Agricultura , Humanos , Águas ResiduáriasRESUMO
Within the biorefinery paradigm, many non-monomeric sugar compounds have been shown to be inhibitory to enzymes and microbial organisms that are used for hydrolysis and fermentation. Here, two novel separation technologies, polyelectrolyte polymer adsorption and resin-wafer electrodeionization (RW-EDI), have been evaluated to detoxify a dilute acid pretreated biomass slurry. Results showed that detoxification of a dilute acid pretreated ponderosa pine slurry by sequential polyelectrolyte and RW-EDI treatments was very promising, with significant removal of acetic acid, 5-hydroxymethyl furfural, and furfural (up to 77%, 60%, and 74% removed, respectively) along with >97% removal of sulfuric acid. Removal of these compounds increased the cellulose conversion to 94% and elevated the hydrolysis rate to 0.69 g glucose/L/h. When using Saccharomyces cerevisiae D(5)A for fermentation of detoxified slurry, the process achieved 99% of the maximum theoretical ethanol yield and an ethanol production rate nearly five-times faster than untreated slurry.
Assuntos
Biomassa , Inibidores Enzimáticos/isolamento & purificação , Fermentação , Adsorção , Cromatografia Líquida de Alta Pressão , Hidrólise , Polietilenoimina/químicaRESUMO
Distiller's grains and solubles (DGS) is the major co-product of corn dry mill ethanol production, and is composed of 30% protein and 30-40% polysaccharides. We report a strategy for simultaneous extraction of protein with food-grade biobased solvents (ethyl lactate, d-limonene, and distilled methyl esters) and enzymatic saccharification of glucan in DGS. This approach would produce a high-value animal feed while simultaneously producing additional sugars for ethanol production. Preliminary experiments on protein extraction resulted in recovery of 15-45% of the protein, with hydrophobic biobased solvents obtaining the best results. The integrated hydrolysis and extraction experiments showed that biobased solvent addition did not inhibit hydrolysis of the cellulose. However, only 25-33% of the total protein was extracted from DGS, and the extracted protein largely resided in the aqueous phase, not the solvent phase. We hypothesize that the hydrophobic solvent could not access the proteins surrounded by the aqueous phase inside the fibrous structure of DGS due to poor mass transfer. Further process improvements are needed to overcome this obstacle.