Carbon quantum dots-modified Z-scheme Bi12O17Cl2/NiAl-LDH for significantly boosting photocatalytic CO2 reduction.

Photocatalytic reduction of CO2 to high-energy products is an effective way to utilize solar energy and mitigate the greenhouse effect. In this paper, a series of CQDs/Bi12O17Cl2/NiAl-LDH (C/BOC/LDH) photocatalysts were prepared via a one-pot hydrothermal method, demonstrated excellent photocatalytic CO2 reduction performance. In the case of only water without any photosensitizer and sacrificial agent, the CO production rate on C/0.3BOC/LDH reached 16.4 µmol·g-1h-1, which is 6.7 times higher than that of the original LDH. The construction of Z-scheme heterojunctions inhibited the recombination of electrons with holes. The unique up-conversion PL behavior of CQDs benefitted the absorption of energy in the NIR by the photocatalyst. This study provides meaningful assistance for the design and construction of a ternary photocatalytic system with Z-scheme heterojunction and carbon-based co-catalyst.

Safety and efficacy of Endovascular Management of high-grade blunt renal injury.

Objectives: To provide data on the safety and efficacy of renal arterial embolization (RAE) in patients with high-grade blunt renal injury. Materials and methods: Fifteen patients with high-grade blunt renal injury (AAST grades IV-V) admitted to our hospital from July 2014 to December 2019 were retrospectively reviewed in this study. Their clinical success rate and complications were investigated accordingly. Results: Fifteen patients with high-grade blunt renal injury, 13 men and 2 women with an average age of 41.6 years, including 11 hemodynamically unstable patients and 4 stable patients, were treated with RAE. Among these patients, 73.3% (11 of 15) had grade IV, and 26.7% (4 of 15) had grade V injuries, while 53.3% (8 of 15) patients had concomitant injuries. One patient received main RAE and 14 patients received selective RAE. The clinical success rate after the first embolization was 93.3% (14 of 15). RAE was repeated and was successfully performed in one patient with sustained hematuria. No significant difference in creatinine levels was found before and after embolization. During the follow-up period of 2-82 months, two patients required tube drainage due to urine leaks, one patient developed renal failure requiring renal replacement therapy, and one patient developed secondary hypertension. Conclusions: RAE can provide a high success rate of hemostasis for both hemodynamically stable and unstable patients with high-grade blunt renal injury, and only minor complications are observed with this procedure.

Fabrication of a ternary NiS/ZnIn2S4/g-C3N4 photocatalyst with dual charge transfer channels towards efficient H2 evolution.

As a renewable green energy, hydrogen has received widespread attention due to its huge potential in solving energy shortages and environment pollution. In this paper, a one-step solvothermal method was applied to grow ultra-thin g-C3N4 (UCN) nanosheets and NiS nanoparticles on the surface of ZnIn2S4 (ZIS). A ternary NiS/ZnIn2S4/ultra-thin-g-C3N4 composite material with dual high-speed charge transfer channels was constructed for the advancement of the photocatalytic H2 generation. The optimal ternary catalyst 1.5wt.%NiS/ZnIn2S4/ultra-thin-g-C3N4 (NiS/ZIS/UCN) achieved a H2 evolution yield reached to 5.02 mmolg-1h-1, which was 5.23 times superior than that of pristine ZnIn2S4 (0.96 mmolg-1h-1) and even outperform than that of the best precious metal modified 3.0 wt%Pt/ZnIn2S4 (4.08 mmolg-1h-1). The AQY at 420 nm could be achieved as high as 30.5%. The increased photocatalytic performance of NiS/ZIS/UCN could be ascribed to the type-I heterojunctions between intimated ZIS and UCN. In addition, NiS co-catalyst with large quantity of H2 evolution sites, could result in efficient photo-induced charges separation and migration. Furthermore, the NiS/ZIS/UCN composite exhibited excellent H2 evolution stability and recyclability. This work would also offer a reference for the design and synthesis of ternary co-catalyst with heterojunction composite for green energy conversion.

The Regenerative Role of Gelatin in PLLA Electrospun Membranes for the Treatment of Chronic Massive Rotator Cuff Injuries.

Failing to regenerate native tendon tissue in chronic massive rotator cuff tears (CMRCTs) results in high retear rates after surgery. Gelatin is a hydrolyzed form of collagen which is bioactive and biocompatible. This study intends to investigate the suitability of integrating gelatin to poly (l-lactic acid) (PLLA) fibrous membranes for promoting the healing of CMRCTs. PLLA/Gelatin electrospun membranes (PGEM) are fabricated using electrospinning technology. The fourier transform infrared, static contact angles are tested sequentially. Cytocompatibility is evaluated with rat tendon fibroblasts and human umbilical endothelial cells (HUEVCs) lines. CMRCTs rat models are established and assigned into three groups (the sham group, the repaired group, and the augmentation group) to perform histomorphological and biomechanical evaluations. Gelatin is successfully integrated into PLLA fibrous membranes by the electrospinning technique. In vitro studies indicate that PGEM shows a great cytocompatibility for rat tendon fibroblasts and HUEVCs. In vivo studies find that applications of PGEM significantly promote well-aligned collagen I fibers formation and enhance biomechanical properties of the repaired tendon in CMRCTs rat models. In summary, gelatin promotes tendon fibroblasts and HUEVCs adhesion, migration, and proliferation on the PLLA fibrous membranes, and PGEM may provide a great prospect for clinical application.

Fabrication of a dual S-scheme Bi7O9I3/g-C3N4/Bi3O4Cl heterojunction with enhanced visible-light-driven performance for phenol degradation.

S-scheme heterostructure can facilitate the separation of carriers while maintain outstanding redox capacity. A series of ternary Bi7O9I3/g-C3N4/Bi3O4Cl photocatalytic system was triumphantly synthesized via oil bath method in this work and used in photocatalytic degradation of phenol. The optimal TOC removal rate reached up to 93.57% under illumination for 160 min, which was slightly lower than phenol photodegradation (about 100%, 100 min). Correspondingly, the apparent rate constants for the decay of phenol are determined to be 0.0211 min-1. The experiment of free radical capture indicated that ·OH and ·O2- were the major oxidizing substances to degrade phenol. The products of phenol photodegradation were identified by high performance liquid chromatography (HPLC) and a possible degradation pathway was proposed. The characterization analysis and density functional theory (DFT) calculations demonstrated that dual S-scheme charge migration was generated at the interface of Bi7O9I3, g-C3N4 and Bi3O4Cl, contributing to an efficient separation of light-excited carriers. In the field of environmental remediation, the discovery of this work could open up promising vistas for designing bismuth-based ternary heterostructures with application potentiality.

A scalable coaxial bioprinting technology for mesenchymal stem cell microfiber fabrication and high extracellular vesicle yield.

Mesenchymal stem cell (MSC)-derived extracellular vesicles (EVs) are promising candidates for regenerative medicine; however, the lack of scalable methods for high quantity EV production limits their application. In addition, signature EV-derived proteins shared in 3D environments and 2D surfaces, remain mostly unknown. Herein, we present a platform combining MSC microfiber culture with ultracentrifugation purification for high EV yield. Within this platform, a high quantity MSC solution (∼3 × 108total cells) is encapsulated in a meter-long hollow hydrogel-microfiber via coaxial bioprinting technology. In this 3D core-shell microfiber environment, MSCs express higher levels of stemness markers (Oct4, Nanog, Sox2) than in 2D culture, and maintain their differentiation capacity. Moreover, this platform enriches particles by ∼1009-fold compared to conventional 2D culture, while preserving their pro-angiogenic properties. Liquid chromatography-mass spectrometry characterization results demonstrate that EVs derived from our platform and conventional 2D culturing have unique protein profiles with 3D-EVs having a greater variety of proteins (1023 vs 605), however, they also share certain proteins (536) and signature MSC-EV proteins (10). This platform, therefore, provides a new tool for EV production using microfibers in one culture dish, thereby reducing space, labor, time, and cost.

MMP-9 as a Biomarker for Predicting Hemorrhagic Strokes in Moyamoya Disease.

Objective: This study was conducted in order to investigate the association of matrix metalloproteinase (MMP)-9 levels with phenotypes of moyamoya disease (MMD). Methods: This study included plasma samples from 84 MMD patients. The clinical variables of these patients were reviewed from the medical record. The serum concentration of tight junction, adherens junction proteins, and MMPs (MMP-2 and MMP-9) was determined using the ELISA method. Patients with hemorrhagic-onset MMD were compared with those with ischemic-onset MMD. Results: Compared with pediatric patients, the expression of MMP-9 was significantly higher, while the MMP-2 and vascular endothelial-cadherin were lower in adult patients. In adult subgroup analysis, hemorrhagic MMD patients exhibited significantly higher serum concentrations of MMP-9 compared with ischemic MMD patients. The ROC curve identified that a baseline serum MMP-9 level >1,011 ng/ml may be associated with spontaneous hemorrhage in adult MMD patients with 70.37% sensitivity and 71.88% specificity [area under curve (AUC), 0.73; 95% CI 0.597-0.864; P = 0.003]. A late Suzuki stage (>4) (OR 4.565, 95% CI 1.028-20.280, P = 0.046) and serum concentrations of MMP-9 >1,011 ng/ml (OR 7.218, 95% CI 1.826-28.533, P = 0.005) are risk predictors of hemorrhages in MMD patients. Hemorrhagic-type MMD patients had higher serum levels of MMP-9 and BBB permeability compared with ischemic-type MMD patients. Adult MMD patients had higher serum levels of MMP-9 and BBB permeability compared with pediatric patients. Conclusions: MMP-9 might serve as a biomarker for hemorrhage prediction in MMD. Serum MMP-9 level >1,011 ng/ml is an independent risk factor of MMD hemorrhagic strokes.

A NiS co-catalyst decorated Zn3In2S6/g-C3N4 type-II ball-flower-like nanosphere heterojunction for efficient photocatalytic hydrogen production.

Promoting the separation of photogenerated electron-hole pairs and enhancing the charge carrier transfer are critical in photocatalysis. In our work, a ball-flower-like NiS/Zn3In2S6/g-C3N4 photocatalyst fabricated by a hydrothermal method exhibited superior performance for photocatalytic water splitting. The optimized 2.0% NiS/Zn3In2S6/g-C3N4 rivaled noble metal based Pt/g-C3N4 and showed an apparent quantum efficiency (AQE) of 24.3% at 420 nm, with a H2 yield of 4.135 mmol g-1 h-1, which was 30.4 and 9.51 times that of pure g-C3N4 and binary Zn3In2S6/g-C3N4 composites, respectively. The experimental and characterization results suggested that the heterojunction formed between Zn3In2S6/g-C3N4 and the decorating NiS co-catalyst cooperatively suppressed the electron-hole recombination and facilitated the charge carrier transfer, thus resulting in significant improvement of the H2 evolution performance. Moreover, the increased specific surface area and the enhanced visible-light absorption also contributed to superior water splitting performance. The prepared ternary catalytic system with the heterojunction and non-noble metal co-catalyst has great potential as an alternative to noble metals for achieving cost-efficient water splitting systems.

Biocompatible and biodegradable scaffold based on polytrimethylene carbonate-tricalcium phosphate microspheres for tissue engineering.

Biocompatible polymers and drug delivery vehicles have been driving development in bone regeneration. However, most bone scaffolds show poor degradation and proliferation. In this study, a composite microsphere scaffold was prepared using vancomycin hydrochloride(VH)-loaded polytrimethylene carbonate(PTMC) microsphere (PTMC-VH). Adopting a thermal technique, a three-dimensional oleic acid-modified tricalcium phosphate (PTMC-OA-TCP)/PTMC-VH microsphere scaffold was prepared. It had a porosity of 41-47 % and pore size of 129-154 µm. The highest drug loading and release efficiency were obtained with the scaffold produced using 2.4 % polymer concentration and 0.5 %polyvinyl alcohol. The scaffold with PTMC-VH microsphereshad enhancedmechanical properties, water absorption capacity, and degradation. In addition, the PTMC-OA-TCP scaffold had comparable performance with bone cement control in terms of bone regeneration in vivo. In summary, the prepared bioactive scaffolds, which had favorable mechanical properties and facilitated osteogenesis, could be a promising alternative for bone cement in bone tissue engineering.

Applications of marine collagens in bone tissue engineering.

For decades, collagen has been among the most widely used biomaterials with several biomedical applications. Recently, researchers have shown a keen interest in collagen obtained from marine sources because of its biocompatibility, biodegradability, ease of extractability, safety, low immunogenicity, and low production costs. A wide variety of marine collagen-based scaffolds have been developed for bone tissue engineering, and these scaffolds display excellent biological effects. This review aims to provide an overview of the biological effects of marine collagen in bone engineering, such as promoting osteogenesis and collagen synthesis, inhibiting inflammation, inducing the differentiation of cartilage, and improving bone mineral density. Marine collagen holds great promise as a biomaterial in bone tissue engineering.

Recent Progress of Transition Metal Phosphides for Photocatalytic Hydrogen Evolution.

Photocatalytic hydrogen evolution can effectively alleviate the troublesome global energy crisis by converting solar energy into the chemical energy of hydrogen. In order to realize efficient hydrogen generation, a variety of semiconductor materials have been extensively investigated, including TiO2 , CdS, g-C3 N4 , metal-organic frameworks (MOFs), and others. In recent years, to achieve higher photocatalytic performance and reach the level of large-scale industrial applications, photocatalysts decorated with transition metal phosphides (TMPs) have shone brightly because of their low cost, stable physical and chemical properties, and substitution for precious metals of TMPs. This Review highlights the preparation methods and properties associated with photocatalysis of TMPs. Moreover, the H2 generation efficiency of photocatalysts loaded with TMPs and the roles of TMPs in catalytic systems are also studied systematically. Apart from being co-catalysts, several TMPs can also serve as host catalysts to boost the activity of photocatalytic composites. Finally, the development prospects and challenges of TMPs are put forward, which is valuable for future researchers to expand the application of TMPs in photocatalytic directions and to develop more active photocatalytic systems.

Enhanced Thermoelectric Properties of Bilayer-Like Structural Graphene Quantum Dots/Single-Walled Carbon Nanotubes Hybrids.

In order to improve the thermoelectric properties of single-walled carbon nanotubes (SWCNTs), bilayer-like structures of graphene quantum dots (GQDs) and SWCNTs films (b-GQDs/SWCNTs) were prepared by directly coating GQDs on the surface of SWCNTs films. Compared to pristine SWCNT films (p-SWCNTs), the electrical conductivity of b-GQDs/SWCNTs increased while their Seebeck coefficient decreased. The special interface structure of GQDs and SWCNTs can not only improve carrier transport to increase electrical conductivity but also scatter phonons to reduce thermal conductivity. A maximum power factor (PF) of 51.2 µW·m-1·K-2 is obtained at 298 K for the b-GQDs/SWCNTs (2:100), which is higher than the PF of 40.9 µW·m-1·K-2 by p-SWCNTs. Incorporation of GQDs shows an obvious improvement in power factor and a significant reduction in the thermal conductivity for SWCNTs, and thus, preparation of b-GQDs/SWCNTs provides a new strategy to enhance the thermoelectric properties of SWCNTs-based materials.

Hsa_circ_0003159 inhibits gastric cancer progression by regulating miR-223-3p/NDRG1 axis.

BACKGROUND: Abnormally expressed circular RNAs (circRNAs) are implicated in the development and treatment of gastric cancer (GC). Previous study has reported that hsa_circ_0003159 is expressed in GC. However, the role and mechanism of hsa_circ_0003159 in GC progression remain unclear. METHODS: GC tissues and normal tissues were harvested from 55 patients in this study. The levels of hsa_circ_0003159, microRNA (miR)-223-3p and N-myc downstream regulated gene 1 (NDRG1) were measured by quantitative real-time polymerase chain reaction or western blot. Cell proliferation, migration, invasion and apoptosis were determined by cell counting kit (CCK)-8, transwell assay, flow cytometry and western blot, respectively. The target association of miR-223-3p-hsa_circ_0003159 and miR-223-3p-NDRG1 was explored by dual-luciferase reporter assay. Xenograft model was established to assess the roles of hsa_circ_0003159 in GC in vivo. RESULTS: Hsa_circ_0003159 was lowly expressed in GC tissues and cells and mainly presented in the cytoplasm. Low expression of hsa_circ_0003159 was associated with lower overall survival and disease-free survival. Hsa_circ_0003159 overexpression inhibited proliferation, migration and invasion but induced apoptosis in GC cells. MiR-223-3p was a target of hsa_circ_0003159 and abated the effect of hsa_circ_0003159 on proliferation, migration, invasion and apoptosis in GC cells. Hsa_circ_0003159 promoted NDRG1 expression by competitively sponging miR-223-3p. Knockdown of NDRG1 reversed the suppressive effect of hsa_circ_0003159 on GC progression. Besides, hsa_circ_0003159 decreased GC cell xenograft tumor growth by regulating miR-223-3p and NDRG1. CONCLUSION: Hsa_circ_0003159 suppressed proliferation, migration, invasion and xenograft tumor growth but promoted apoptosis by decreasing miR-223-3p and increasing NDRG1 in GC, indicating a novel target for treatment of GC.

Practical Experience of Endoscope Reprocessing and Working-Platform Disinfection in COVID-19 Patients: A Report from Guangdong China during the Pandemic.

BACKGROUND: No consensus exists regarding which procedures should be performed to disinfect endoscopes and working platforms after COVID-19 patients have undergone endoscopy. METHODS: We analyzed the disinfection quality of endoscopes and working platforms after 11 COVID-19 patients had undergone endoscopy. CONCLUSIONS: For endoscopic preprocessing at the bedside, a key disinfection step is using a multienzyme stock solution. The nucleic acid tests for endoscopists, washers, endoscopes, and working platforms were all negative. Based on our experience with the 11 COVID-19 patients who had undergone endoscopy, we provide an endoscopic reprocessing method for the bedside endoscopic diagnosis and treatment of COVID-19 patients for reference.

Sequence-dependent synergistic cytotoxicity of icotinib and pemetrexed in human lung cancer cell lines in vitro and in vivo.

BACKGROUND: Recent Clinical trials of administration of epidermal growth factor receptor tyrosine kinase inhibitors (EGFR-TKIs) in combination with standard first-line chemotherapy have failed to improve survival in patients with advanced NSCLC, However, the sequential treatment with EGFR-TKIs and chemotherapy is expected to improve survival of NSCLC. The aim of this study is to test the antiproliferative effect of pemetrexed combined with icotinib in different sequences on non-small cell lung cancer (NSCLC) cell lines to determine the optimal combination schedule, and subsequently elaborated the potential mechanisms. METHODS: Six human lung cancer cell lines with wild-type or mutant EGFR gene were exposed to pemetrexed and icotinib combined in different sequences. Cell proliferation was examined by cell counting kit-8 (CCK-8) and colony formation assay; cell cycle and apoptosis were evaluated by flow cytometry; cell migration and invasion were measured by wound healing and transwell invasion assays respectively; protein expression was by detected by Western blot. RESULTS: The growth inhibition effect of pemetrexed combined with icotinib on NSCLC cells were schedule-dependent in vitro and in vivo. Treatment with pemetrexed followed by icotinib (P-I) had significantly stronger anticancer ability than treatment with icotinib followed by pemetrexed (I-P) and concomitant treatment with pemetrexed and icotinib (P + I). Cell cycle analysis revealed that pemetrexed blocked cells in S phase, whereas icotinib arrested cells in G1 phase. We also found that icotinib markedly enhanced the pro-apoptotic activity of pemetrexed via cytochrome-C/Caspase/Bcl-2 signaling pathway. In addition, our results showed that pemetrexed alone increased the levels of p-EGFR, p-AKT and p-MAPK, which were inhibited by icotinib. Finally, we showed that the washout period of icotinib was no less than 96 h. CONCLUSIONS: Sequential treatment of NSCLC cells with pemetrexed followed by icotinib had powerful antiproliferative effect, and it could become a novel effective combination therapy for NSCLC patients.

Kaempferol inhibits proliferation, migration, and invasion of liver cancer HepG2 cells by down-regulation of microRNA-21.

Liver cancer is one of the most common and lethal cancers in human digestive system, which kills more than half a million people every year worldwide. This study aimed to investigate the effects of kaempferol, a flavonoid compound isolated from vegetables and fruits, on hepatic cancer HepG2 cell proliferation, migration, invasion, and apoptosis, as well as microRNA-21 (miR-21) expression. Cell viability was detected using cell counting kit-8 (CCK-8) assay. Cell proliferation was measured using 5-bromo-2'-deoxyuridine (BrdU) incorporation assay. Cell apoptosis was assessed using Guava Nexin assay. Cell migration and invasion were determined using two-chamber migration (invasion) assay. Cell transfection was used to change the expression of miR-21. Quantitative reverse transcription polymerase chain reaction (qRT-PCR) was performed to analyze the expressions of miR-21 and phosphatase and tensin homologue (PTEN). Expression of key proteins involved in proliferation, apoptosis, migration, invasion, and phosphatidylinositol 3-kinase/protein kinase 3/mammalian target of rapamycin (PI3K/AKT/mTOR) pathway were evaluated using western blotting. Results showed that kaempferol significantly inhibited HepG2 cell proliferation, migration, and invasion, and induced cell apoptosis. Kaempferol remarkably reduce the expression of miR-21 in HepG2 cells. Overexpression of miR-21 obviously reversed the effects of kaempferol on HepG2 cell proliferation, migration, invasion, and apoptosis. Moreover, miR-21 negatively regulated the expression of PTEN in HepG2 cells. Kaempferol enhanced the expression of PTEN and inactivated PI3K/AKT/mTOR signaling pathway in HepG2 cells. In conclusion, kaempferol inhibited proliferation, migration, and invasion of HepG2 cells by down-regulating miR-21 and up-regulating PTEN, as well as inactivating PI3K/AKT/mTOR signaling pathway.

PEDOT:PSS/graphene quantum dots films with enhanced thermoelectric properties via strong interfacial interaction and phase separation.

The typical conductive polymer of PEDOT:PSS has recently attracted intensive attention in thermoelectric conversion because of its low cost and low thermal conductivity as well as high electrical conductivity. However, compared to inorganic counterparts, the relatively poor thermoelectric performance of PEDOT:PSS has greatly limited its development and high-tech applications. Here, we report a dramatic enhancement in the thermoelectric performance of PEDOT:PSS by constructing unique composite films with graphene quantum dots (GQDs). At room temperature, the electrical conductivity and Seebeck coefficient of PEDOT:PSS/GQDs reached to 7172 S/m and 14.6 µV/K, respectively, which are 30.99% and 113.2% higher than those of pristine PEDOT:PSS. As a result, the power factor of the optimized PEDOT:PSS/GQDs composite is 550% higher than that of pristine PEDOT:PSS. These significant improvements are attributed to the ordered alignment of PEDOT chains on the surface of GQDs, originated from the strong interfacial interaction between PEDOT:PSS and GQDs and the separation of PEDOT and PSS phases. This study evidently provides a promising route for PEDOT:PSS applied in high-efficiency thermoelectric conversion.

Knockdown of Urothelial Carcinoma-Associated 1 Suppressed Cell Growth and Migration Through Regulating miR-301a and CXCR4 in Osteosarcoma MHCC97 Cells.

Liver cancer is one of the most common malignancies in the world and a leading cause of cancer-related mortality. Accumulating evidence has highlighted the critical role of long noncoding RNAs (lncRNAs) in various cancers. The present study aimed to explore the role of lncRNA urothelial carcinoma-associated 1 (UCA1) in cell growth and migration in MHCC97 cells and its underlying mechanism. First, we assessed the expression of UCA1 in MHCC97 and three other cell lines by RT-qPCR. Then the expression of UCA1, miR-301a, and CXCR4 in MHCC97 cells was altered by transient transfection. The effects of UCA1 and miR-301 on cell viability, migration, invasion, and apoptosis were assessed. The results revealed that UCA1 expression was relatively higher in MHCC97 cells than in MG63, hFOB1.19, and OS-732 cells. Knockdown of UCA1 reduced cell viability, inhibited migration and invasion, and promoted cell apoptosis. However, the effect of UCA1 knockdown on cell growth and migration was blocked by miR-301a overexpression, whose expression was regulated by UCA1. We also found that miR-301a positively regulated CXCR4 expression. CXCR4 inhibition reversed the effect of miR-301a overexpression on cell growth and migration. Moreover, miR-301a activated the Wnt/ß-catenin and NF-κB pathways via regulating CXCR4. The present study demonstrated that UCA1 inhibition exerted an antigrowth and antimigration role in MHCC97 cells through regulating miR-301a and CXCR4 expression.

Temperature Dependence of the Pore Structure in Polyvinylidene Fluoride (PVDF)/Graphene Composite Membrane Probed by Electrochemical Impedance Spectroscopy.

In this paper, graphene was introduced in the PVDF to improve the thermal stability of the pore structure, which is the key feature for the membrane applied for the thermo-osmotic energy conversion (TOEC) process. The PVDF/graphene composite membranes were characterized by a scanning electron microscopy (SEM), a water contact angle measurement, and electrochemical impedance spectroscopy (EIS). It was found that the composite membranes exhibited improved surface hydrophobicity. Moreover, the pores in pure PVDF membrane would expand during the heat process while the existence of graphene in PVDF clearly suppressed the expansion, which implied better thermal stability of the pores in the composite membrane. According to the pore deformation time, the heat conductivities of the membranes were calculated and compared with each other. It confirmed that the composite membrane with higher graphene content exhibited enhanced heat conductivity. EIS can be used to monitor the temperature dependence of the pore structure in aqueous environments.

In situ investigation of bismuth nanoparticles formation by transmission electron microscope.

Bismuth (Bi) nanoparticles are prepared by using NaBi(MoO4)2 nanosheets in the beam of electrons emitted by transmission electron microscope. The formation and growth of Bi nanoparticles are investigated in situ. The sizes of Bi nanoparticles are confined within the range of 6-10nm by controlling irradiation time. It is also observed that once the diameter of nanoparticles is larger than 10nm, the Bi particles are stable as a result of the immobility of large nanoparticles. In addition, some nanoparticles on the edges form nanorods, which are explained as the result of a coalescence process, if the irradiation period is longer than 10min. The in situ research on Bi nanoparticles facilitates in-depth investigations of the physicochemical behavior and provides more potential applications in various fields such as sensors, catalysts and optical devices.