Two novel parameters to evaluate the influence of the age and gender on the anatomic relationship of the atlas and axis in children no more than 8 years old: imaging study.

PURPOSE: Because of the complex cervical vertebral embryology and some normal variations, the atlantoadental interval (ADI) was not suitable for the evaluation of the anatomic relationship between the atlas and axial in children less than 2 years old. And the influence of the age and gender on the anatomic relationship between atlas and axial in children was still unclear. Two novel parameters, atlas-axis anteroposterior distance (AAAD) and atlas-axis lateral distance (AALD), were invented to evaluate the anatomic relationship between the atlas and axis in the children no more than 8 years old with different age and gender. METHODS: Cross-sectional computed tomography (CT) scans of the atlantoaxial joint for 140 randomly selected pediatric patients no more than 8 years old were analyzed. On the ideal CT reconstruction images, AAAD, AALD, atlantoaxial lateral bending angle (AALB), and atlantoaxial rotation angle (AARA) were measured. RESULTS: There was no statistically significant difference between the mean AAAD in different age and gender groups. The 99% confidence interval for AAAD was 7.12-7.82 mm. There was no significant correlation between AAAD and AALB/AARA and AALD and AALB/AARA. CONCLUSION: The AAAD was less than 7.12 mm or much than 7.82 mm that suggested a possible instability in the atlantoaxial joint and could help the diagnosis of the atlantoaxial instability in children no more than 8 years old. There was no difference between the mean AAAD of pediatric patients no more than 8 years old in different age and gender groups.

Chondrosarcoma of the Osseous Spine Treated by Surgery With or Without Radiotherapy: A Propensity Score Matched and Grade/Stage-stratified Study.

STUDY DESIGN: This was a longitudinal cohort study. OBJECTIVE: The main objective of this study was to investigate the outcomes of surgery with or without radiotherapy during treatment of patients with chondrosarcoma of the osseous spine. SUMMARY OF BACKGROUND DATA: Chondrosarcoma is a primary spinal malignant tumor; chemotherapy and radiotherapy (RT) are generally unsuccessful, and thus, the main treatment of choice is complete en bloc resection. However, even with complete resection, these patients still have a significant rate of recurrence, morbidity, and mortality. Although there have been reports that the addition of RT to surgery may lead to increased survival and better cancer control, the evidence of the efficacy of RT remains controversial. MATERIALS AND METHODS: Patients diagnosed with chondrosarcoma who are then treated by surgery alone or surgery+RT were identified and extracted from the SEER (Surveillance, Epidemiology, and End Results) database (1973-2013). Propensity score matched (PSM) analysis was performed to balance patient characteristics between surgery alone and surgery+RT groups. Patients with a different grade and stage were stratified and analyzed. RESULTS: A total of 778 patients with chondrosarcoma of the osseous spine treated by surgery alone or surgery+RT were extracted from the SEER database. Before PSM, the unadjusted Kaplan-Meier curve and bivariable Cox proportional hazard regression models showed that the surgery alone group had higher chondrosarcoma cancer-specific survival and overall survival than the surgery+RT group (both P<0.001), while the difference was attenuated after PSM. Stratified analysis found that RT was worse for low-grade chondrosarcoma patients and had a better trend for high-grade chondrosarcoma patients. CONCLUSIONS: The results of our present study suggest that low-grade chondrosarcoma of the osseous spine is resistant to RT, while high-grade chondrosarcoma patients had a better trend with RT. LEVEL OF EVIDENCE: Level III.

Transmuscular Ultrasonography of the Placement of Thoracolumbar Pedicle Screws: A Cadaveric Study.

BACKGROUND: Transpedicular screw fixation has a biomechanical advantage of improving fusion rates. In posterior thoracolumbar immobilization, a large number of screws cause perforation to the pedicle or vertebral body. Radiography and computed tomography (CT) have been used to minimize this complication. The ability of ultrasound (US) to detect the pedicle breach during placement of the screw is unknown. The aim of this study was to evaluate the sensitivity of US for detecting breaches. METHODS: A B-type transducer was used to scan 216 titanium pins inserted into cadaveric pedicles. Of the pins, 180 were intentionally misplaced: 90 pins breached the lateral wall of the pedicle, and 90 pins pierced the anterior wall of the vertebral body. US images were reviewed by 3 examiners blinded to both the procedure and the corresponding CT findings. The perforation length of pins was measured by 3 radiologists on CT images. RESULTS: CT data were divided into 2 groups. In group 1 (perforation length 0-2 mm), sensitivity of US for detecting lateral wall and anterior wall perforation was 80.95% and 76.42%, respectively; in group 2 (perforation length 2-4 mm), sensitivity was 94.79% and 91.93%. Overall sensitivity of US to detect lateral wall and anterior wall perforation was 89.63% and 86.30%, respectively. The sensitivity of US for detecting perforation was greater in the lateral wall than in the anterior wall. Sensitivity of US was greater in group 2 than group 1 for both lateral and anterior perforation. CONCLUSIONS: US can be applied to detect perforation of ≤4 mm. Use of US may improve patient safety.

Percutaneous anterior C1/2 transarticular screw fixation: salvage of failed percutaneous odontoid screw fixation for odontoid fracture.

BACKGROUND: The objective of this study is to investigate the outcomes and safety of using percutaneous anterior C1/2 transarticular screw fixation as a salvage technique for odontoid fracture if percutaneous odontoid screw fixation fails. METHODS: Fifteen in 108 odontoid fracture patients (planned to be treated by percutaneous anterior odontoid screw fixation) were failed to introduce satisfactory odontoid screw trajectory. To salvage this problem, we chose the percutaneous anterior C1/2 transarticular screw fixation technique in treatment of these patients. The visual analogue score (VAS) of neck pain and Neck Disability Index (NDI) of all patients were scored at pre-operation, 3 months after operation, and final follow-up. Additional, technique-related complications were recorded and collected. RESULTS: Percutaneous C1/2 transarticular screw fixation was performed successfully in all 15 patients whose odontoid screw fixation failed. No technique-related complications (such as nerve injury, spinal cord injury, and esophageal injury) occurred. The VAS of neck pain and NDI score improved significantly (P = 0.000) after operation, and no significant differences were found when compared to 93 non-salvage patients who successfully performed the percutaneous anterior odontoid screw fixation. No screw loose or breakage occurred, all of the odontoid fractures achieve radiographic fusion, bony fusion bridge could be observed at the C1/2 lateral articular facet on 9/15 patients. CONCLUSIONS: We suggest that percutaneous anterior C1/2 transarticular screw fixation is a good alternative salvage technique if percutaneous odontoid screw fixation failed, and it is a minimally invasive, feasible, and safe technique.

Improving the trajectory of transpedicular transdiscal lumbar screw fixation with a computer-assisted 3D-printed custom drill guide.

Transpedicular transdiscal screw fixation is an alternative technique used in lumbar spine fixation; however, it requires an accurate screw trajectory. The aim of this study is to design a novel 3D-printed custom drill guide and investigate its accuracy to guide the trajectory of transpedicular transdiscal (TPTD) lumbar screw fixation. Dicom images of thirty lumbar functional segment units (FSU, two segments) of L1-L4 were acquired from the PACS system in our hospital (patients who underwent a CT scan for other abdomen diseases and had normal spine anatomy) and imported into reverse design software for three-dimensional reconstructions. Images were used to print the 3D lumbar models and were imported into CAD software to design an optimal TPTD screw trajectory and a matched custom drill guide. After both the 3D printed FSU models and 3D-printed custom drill guide were prepared, the TPTD screws will be guided with a 3D-printed custom drill guide and introduced into the 3D printed FSU models. No significant statistical difference in screw trajectory angles was observed between the digital model and the 3D-printed model (P > 0.05). Our present study found that, with the help of CAD software, it is feasible to design a TPTD screw custom drill guide that could guide the accurate TPTD screw trajectory on 3D-printed lumbar models.

Comparison of the more than 5-year clinical outcomes of cervical disc arthroplasty versus anterior cervical discectomy and fusion: A protocol for a systematic review and meta-analysis of prospective randomized controlled trials.

BACKGROUND: Anterior cervical discectomy and fusion (ACDF) was almost the "golden standard" technique in treatment of symptomatic cervical degenerative disc disease, however, it cause motion loss of the indexed level, increase the intradiscal pressure and motion of the adjacent levels, and may accelerate the degeneration of adjacent level. Cervical disc arthroplasty (CDA) was designed to preserve the motion of index level, avoid the over-activity of adjacent levels and reduce the degeneration of adjacent disc levels, the process of degeneration of adjacent level is very slowly, long term follow up studies should be conducted, this study aim to compare the more than 5 years' long-term clinical outcomes and safety between CDA and ACDF. METHODS: A systematic review and meta-analysis that will be performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses). The electric database of Medline, Embase, and Cochrane library will be systematic search. A standard data form will be used to extract the data of included studies. We will assess the studies according to the Cochrane Handbook for Systematic Reviews of Interventions, and perform analysis in software STATA 12.0. Fixed-effects models will be used for homogeneity data, while random-effects will be used for heterogeneity data. The overall effect sizes will be determined as weighted mean difference (WMD) for continuous outcomes and Relative risk (RR) for dichotomous outcomes. RESULTS: The results of study will be disseminated via both international conference and peer-review journal. CONCLUSION: The conclusion of our study will provide the long-term and updated evidence of clinical outcomes and safety between CDA and ACDF, and help surgeon to change better surgical technique for patients.

A novel computed method to reconstruct the bilateral digital interarticular channel of atlas and its use on the anterior upper cervical screw fixation.

Purpose. To investigate a novel computed method to reconstruct the bilateral digital interarticular channel of atlas and its potential use on the anterior upper cervical screw fixation. Methods. We have used the reverse engineering software (image-processing software and computer-aided design software) to create the approximate and optimal digital interarticular channel of atlas for 60 participants. Angles of channels, diameters of inscribed circles, long and short axes of ellipses were measured and recorded, and gender-specific analysis was also performed. Results. The channels provided sufficient space for one or two screws, and the parameters of channels are described. While the channels of females were smaller than that of males, no significant difference of angles between males and females were observed. Conclusion. Our study demonstrates the radiological features of approximate digital interarticular channels, optimal digital interarticular channels of atlas, and provides the reference trajectory of anterior transarticular screws and anterior occiput-to-axis screws. Additionally, we provide a protocol that can help make a pre-operative plan for accurate placement of anterior transarticular screws and anterior occiput-to-axis screws.

L5-S1 disc degeneration and the anatomic parameters of the iliac crest: imaging study.

PURPOSE: To evaluate the relationship between height ratio of the iliac crest to L4 (HR), width ratio of the iliac crest to L4 (WR) and L5-S1 disc degeneration. METHODS: On T2-weighted sagittal images of the 50 randomly selected patients, two observers graded L5-S1 discs and some other parameters were measured. Then, relative signal intensity (RSI) of the L5-S1 nucleus pulposus was calculated. On anteroposterior and lateral radiographs of the same 50 patients' lumbar spine, the parameters such as the height of the iliac crest were measured and then HR and WR were calculated. Finally, HR, WR and the percentage of the sROM of L5-S1 in L1-S1 segments of the other 51 randomly selected patients were calculated. RESULTS: Positive correlations were found between HR, WR and RSI of the L5-S1 disc. Negative correlations were found between HR, WR and modified Pfirrmann scores of L5-S1 nucleus pulposus. A statistically significant negative correlation was found between HR and the percentage of sROM of L5-S1 in L1-S1 segments. CONCLUSIONS: Low HR and (or) WR were the risk factors for L5-S1 disc degeneration. High HR could reduce the percentage of sROM of L5-S1 in L1-S1 segments and high HR and (or) WR could reduce the incidence of L5-S1 disc degeneration.

The accuracy of a method for printing three-dimensional spinal models.

BACKGROUND: To study the morphology of the human spine and new spinal fixation methods, scientists require cadaveric specimens, which are dependent on donation. However, in most countries, the number of people willing to donate their body is low. A 3D printed model could be an alternative method for morphology research, but the accuracy of the morphology of a 3D printed model has not been determined. METHODS: Forty-five computed tomography (CT) scans of cervical, thoracic and lumbar spines were obtained, and 44 parameters of the cervical spine, 120 parameters of the thoracic spine, and 50 parameters of the lumbar spine were measured. The CT scan data in DICOM format were imported into Mimics software v10.01 for 3D reconstruction, and the data were saved in .STL format and imported to Cura software. After a 3D digital model was formed, it was saved in Gcode format and exported to a 3D printer for printing. After the 3D printed models were obtained, the above-referenced parameters were measured again. RESULTS: Paired t-tests were used to determine the significance, set to P<0.05, of all parameter data from the radiographic images and 3D printed models. Furthermore, 88.6% of all parameters of the cervical spine, 90% of all parameters of the thoracic spine, and 94% of all parameters of the lumbar spine had Intraclass Correlation Coefficient (ICC) values >0.800. The other ICC values were <0.800 and >0.600; none were <0.600. CONCLUSION: In this study, we provide a protocol for printing accurate 3D spinal models for surgeons and researchers. The resulting 3D printed model is inexpensive and easily obtained for spinal fixation research.

Percutaneous posterior transdiscal oblique screw fixation with lateral interbody fusion: a radiological and cadaveric study.

PURPOSE: To design and investigate a novel technique of percutaneous posterior transdiscal oblique screw fixation with lateral interbody fusion. METHODS: CT scans of 45 patients were collected and imported into Mimics software for three-dimensional (3D) reconstruction. Cylinders were drawn to simulate the trajectory of the oblique screw. Six measurements were obtained for each unit to design a right size cage: a the distance between the intersection of the simulated trajectory of the screw with the inferior border of the upper vertebra and its anteroinferior corner; b the distance between the intersection of the simulated trajectory of the screw with the superior border of the inferior vertebra and its anterosuperior corner; h the height of the intervertebral space; θ the angle between simulated trajectory of screw and the upper endplate of inferior vertebra; uw: the width of the inferior endplate of upper vertebra; iw: the width of upper endplate of inferior vertebra. Three intact adult fresh-frozen cadaveric specimens were obtained, percutaneous posterior transdiscal oblique screw fixation was performed under X-ray apparatus, and interbody cage was implanted by assistance with special self-retaining retractor system and endoscope. RESULTS: According to the results of data measured from 3D images, trapezoid shape interbody cages with suitable size were designed. Percutaneous posterior oblique screw fixation with lateral interbody fusion was performed on three cadaveric specimens successfully. CONCLUSION: Using specially designed trapezoid shape interbody cages, assisted by intra-operative image intensification and endoscope, it is feasible to perform percutaneous posterior transdiscal oblique screw fixation with lateral interbody fusion technique.

The relationship between vitamin A and risk of fracture: meta-analysis of prospective studies.

Osteoporotic fracture is a significant cause of morbidity and mortality and is a challenging global health problem. Previous reports of the relation between vitamin A intake or blood retinol and risk of fracture were inconsistent. We searched Medline and Embase to assess the effects of vitamin A (or retinol or beta-carotene but not vitamin A metabolites) on risk of hip and total fracture. Only prospective studies were included. We pooled data with a random effects meta-analysis with adjusted relative risk (adj.RR) and 95% confidence interval (CI). We used Q statistic and I(2) statistic to assess heterogeneity and Egger's test to assess publication bias. Eight vitamin A (or retinol or beta-carotene) intake studies (283,930 participants) and four blood retinol level prospective studies (8725 participants) were included. High intake of vitamin A and retinol were shown to increase risk of hip fracture (adj.RR [95% CI] = 1.29 [1.07, 1.57] and 1.40 [1.03, 1.91], respectively), whereas beta-carotene intake was not found to increase the risk of hip fracture (adj.RR [95% CI] = 0.82 [0.59, 1.14]). Both high or low level of blood retinol was shown to increase the risk of hip fracture (adj.RR [95% CI] = 1.87 [1.31, 2.65] and 1.56 [1.09, 2.22], respectively). The risk of total fracture does not differ significantly by level of vitamin A (or retinol) intake or by blood retinol level. Dose-response meta-analysis shows a U-shaped relationship between serum retinol level and hip fracture risk. Our meta-analysis suggests that blood retinol level is a double-edged sword for risk of hip fracture. To avoid the risk of hip fracture caused by too low or too high a level of retinol concentration, we suggest that intake of beta-carotene (a provitamin A), which should be converted to retinol in blood, may be better than intake of retinol from meat, which is directly absorbed into blood after intake.

The influence of cervical spine position on the three anterior endoscopic approaches to the craniovertebral junction: an imaging study.

BACKGROUND CONTEXT: Three endoscopic anterior approaches, the transnasal, transoral, and transcervical approaches, are used for ventral lesions of the craniovertebral junction and have been compared regarding surgical working distances and approach angles. However, how the position of the cervical spine influences the depths of surgical corridors and approach angles for the three approaches has not been evaluated. PURPOSE: To evaluate the depths of surgical corridors and the approach angles for the three endoscopic approaches, taking the influence of cervical spine position into account. STUDY DESIGN: A radiographic study comparing three anterior endoscopic approaches to the craniovertebral junction. PATIENT SAMPLE: Cervical extension and flexion radiographs for 34 patients and cross-sectional computed tomography scans for 30 additional patients were assessed. OUTCOME MEASURES: The depths of the surgical corridors and the approach angles for the three endoscopic approaches in the midsagittal planes. METHODS: We determined the mean angles of the surgical trajectories for the endoscopic transoral and transcervical approaches on cervical extension and flexion radiographs. In addition, we measured the depths of the surgical corridors and the approach angles for the three approaches in the midsagittal plane. RESULTS: The average depths of surgical corridors were as follows: endonasal, 93.65 mm; transoral, 85.27 mm; transcervical, 62.97 mm (in extension). The average approach angles were as follows: endonasal, 31.22°; transoral, 30.87°; transcervical, 36.58° (in extension). CONCLUSIONS: The position of the cervical spine does not influence the surgical convenience of the endoscopic transnasal approach, but it can influence the endoscopic transoral and transcervical approaches, especially the latter. The endoscopic transcervical approach offers several advantages over the endoscopic transoral and endonasal approaches.

The existence of intravertebral cleft impact on outcomes of nonacute osteoporotic vertebral compression fractures patients treated by percutaneous kyphoplasty: a comparative study.

STUDY DESIGN: A retrospective comparative study. OBJECTIVE: The purpose of this study is to assess radiologic features of intravertebral cleft (IVC) in nonacute osteoporotic vertebral compression fractures (OVCFs) patients, and analyze the existence of IVC impact on outcomes of percutaneous kyphoplasty (PKP). SUMMARY OF BACKGROUND DATA: The IVC sign is regarded as vertebral instability and the cause of persisting pain. It is more likely to happen at nonacute OVCFs patients. Patients with IVC sign have different outcomes from these without IVC treated by percutaneous vertebroplasty. There were rare reports about the outcomes of patients with IVC sign treated by PKP. MATERIALS AND METHODS: We divided 92 nonacute OVCFs patients (total of 113 vertebrae) into 2 groups according to the existence of IVC. Preoperative and postoperative Visual Analogue Scales, Oswestry Disability Index, kyphotic angulation (KA), and anterior vertebral height were recorded; the incidence and radiologic features of IVC were analyzed. RESULTS: The diagnostic sensitivity of IVC on plain radiograph, computed tomography, and magnetic resonance imaging were 35.4%, 89.3%, and 83.3%, respectively. The IVC group had an average correction KA of 9.14 degrees and reduction of ratio of compression of 20.09%, and the non-IVC group was 8.76 degrees and 20.23%, respectively. Cleft pattern of cement accounted for 64.6% in IVC group and 27.7% in non-IVC group. Five/7 of cement leakage in IVC group was intradiscal leakage, whereas 7/9 of cement leakage in non-IVC group was perivertebral leakage. CONCLUSIONS: Computed tomography and magnetic resonance imaging were more sensitivity to diagnose IVC sign than X-ray. PKP could improve pain, functional activity, KA, and anterior height of both IVC and non-IVC groups, however, there was more cleft pattern of cement and higher intradiscal cement leakage in the IVC group.

Functional motor nerve regeneration without motor-sensory specificity following end-to-side neurorrhaphy: an experimental study.

PURPOSE: To evaluate the quality of regenerating myelinated axons and motor-sensory specificity in an end-to-side nerve repair model. METHODS: We divided 20 rats into 3 groups: (1) end-to-side neurorrhaphy using the ulnar nerve as donor nerve and the musculocutaneous nerve as recipient nerve; (2) normal control; and (3) transected nerve with the stumps buried. At 5 months, we monitored the grooming test, the electrophysiological response, and the histologic changes in nerve and muscle. RESULTS: Grooming recovered successfully, and electrophysiological investigations revealed that the target muscles had been reinnervated in the end-to-side group. The mean wet weight of the reinnervated biceps brachii muscle was 72% of the normal muscle, and the mean muscle fiber cross-sectional area of the reinnervated muscle was similar to the normal muscle. The implanted musculocutaneous nerve contained varying but satisfactory numbers of axons (end-to-side group: 596 ± 348 vs normal group: 1,340 ± 241). Acetylcholinesterase staining revealed a similar percentage of myelinated fibers in the musculocutaneous nerve (39%) and the biceps brachii branch of the musculocutaneous nerve (38%) in the end-to-side group. This was similar to the number of myelinated fibers in the donor ulnar nerve (37%). CONCLUSIONS: The present study confirms that limited but functional reinnervation can occur on the basis of collateral sprouting of intact axons from the ulnar nerve. The motor-sensory specificity is not important.