RESUMO
Given the growing number of devices and their need for internet access, researchers are focusing on integrating various network technologies. Concerning indoor wireless services, a promising approach in this regard is to combine light fidelity (LiFi) and wireless fidelity (WiFi) technologies into a hybrid LiFi and WiFi network (HLWNet). Such a network benefits from LiFi's distinct capability for high-speed data transmission and from the wide radio coverage offered by WiFi technologies. In this paper, we describe the framework for the HWLNet architecture, providing an overview of the handover methods used in HLWNets and presenting the basic architecture of hybrid LiFi/WiFi networks, optimization of cell deployment, relevant modulation schemes, illumination constraints, and backhaul device design. The survey also reviews the performance and recent achievements of HLWNets compared to legacy networks with an emphasis on signal to noise and interference ratio (SINR), spectral and power efficiency, and quality of service (QoS). In addition, user behaviour is discussed, considering interference in a LiFi channel is due to user movement, handover frequency, and load balancing. Furthermore, recent advances in indoor positioning and the security of hybrid networks are presented, and finally, directions of the hybrid network's evolution in the foreseeable future are discussed.
RESUMO
Optical time-domain reflectometer (OTDR) enables simple identification and localization of a plethora of refractive and reflective events on a fiber link, including splices, connectors and breaks, and measuring insertion/return loss. Specifically, large enough OTDR dynamic range (DR) and thus high signal-to-noise-ratio (SNR) enable clear far-end visibility of longer fibers. We point out here that, under such conditions, the optical bit-error-rate (BER) floor is dominantly determined by reflective events that introduce significant return loss. This complements the OTDR legacy tests by appropriate optical BER floor estimation in the field. As high SNR implies inter-symbol interference as dominating error generating mechanism, we could apply the classical time-dispersion channel model for the optical BER floor determined by the root-mean-square (rms) delay spread of the actual fiber channel power-delay profile. However, as the high-SNR condition is not always fulfilled mostly due to insufficient DR, we propose here inserting a low-noise optical preamplifier as the OTDR front-end to reduce noise floor and amplify the backscattered signal. In order to verify the model for the exemplar test situation, we measured BER on the same fiber link to find very good matching between the measured BER floor values and the ones predicted from the OTDR trace.
RESUMO
This work is motivated by growing evidence that the standard Cyclic Prefix (CP) length, adopted in the Long Term Evolution (LTE) physical layer (PHY) specifications, is oversized in propagation environments ranging from indoor to typical urban. Although this ostensibly seems to be addressed by 5G New Radio (NR) numerology, its scalable CP length reduction is proportionally tracked by the OFDM symbol length, which preserves the relative CP overhead of LTE. Furthermore, some simple means to optimize fixed or introduce adaptive CP length arose from either simulations or models taking into account only the bit-oriented PHY transmission performance. On the contrary, in the novel crosslayer analytical model proposed here, the closed-form expression for the optimal CP length is derived such as to minimize the effective average codeblock length, by also considering the error recovery retransmissions through the layers above PHY-the Medium Access Control (MAC) and the Radio Link Control (RLC), in particular. It turns out that, for given protective coding, the optimal CP length is determined by the appropriate rms delay spread of the channel power delay profile part remaining outside the CP span. The optimal CP length values are found to be significantly lower than the corresponding industry-standard ones, which unveils the potential for improving the net throughput.
RESUMO
This Special Issue originates from the international conference EuCNC 2020 (European Conference on Networks and Communications), which was planned to be held in June 2020 in Dubrovnik (Croatia), but due to the COVID-19 pandemic was changed to an Online Conference. The Technical Programme Chairs of the conference have selected the best papers and invited authors to submit an extended version of their paper, by at least one third of their length. Only the top ranked papers were invited to this Special Issue, in order to fulfil its purpose. The main target was to collect and present quality research contributions in the most recent activities related to systems and networks beyond 5G, already presenting ideas for 6G. Through this Special Issue, the state-of-the-art is presented and the new challenges are highlighted, regarding the latest advances on systems and network perspectives that are already being positioned beyond 5G, bridging as well with the evolution of 5G, including applications and trials. Therefore, the motivation for this Special Issue is to present the latest and finest results on the evolution of research of mobile and wireless communications, coming, but not exclusively (since EuCNC is a conference open to the whole research community), from projects co-financed by the European Commission within its R&D programmes.
RESUMO
Contemporary wireless networks dramatically enhance data rates and latency to become a key enabler of massive communication among various low-cost devices of limited computational power, standardized by the Long-Term Evolution (LTE) downscaled derivations LTE-M or narrowband Internet of Things (NB IoT), in particular. Specifically, assessment of the physical-layer transmission performance is important for higher-layer protocols determining the extent of the potential error recovery escalation upwards the protocol stack. Thereby, it is needed that the end-points of low processing capacity most efficiently estimate the residual bit error rate (BER) solely determined by the main orthogonal frequency-division multiplexing (OFDM) impairment-carrier frequency offset (CFO), specifically in small cells, where the signal-to-noise ratio is large enough, as well as the OFDM symbol cyclic prefix, preventing inter-symbol interference. However, in contrast to earlier analytical models with computationally demanding estimation of BER from the phase deviation caused by CFO, in this paper, after identifying the optimal sample instant in a power delay profile, we abstract the CFO by equivalent time dispersion (i.e., by additional spreading of the power delay profile that would produce the same BER degradation as the CFO). The proposed BER estimation is verified by means of the industry-standard LTE software simulator.