Corrigendum: Optimized riboswitch-regulated AAV vector for VEGF-B gene therapy.

[This corrects the article DOI: 10.3389/fmed.2022.1052318.].

Development of Large-Scale Downstream Processing for Lentiviral Vectors.

The interest in lentiviral vectors (LVs) has increased prominently for gene therapy applications, but few have reached the later stages of clinical trials. The main challenge has remained in scaling up the manufacturing process for the fragile vector to obtain high titers for in vivo usage. We have previously scaled up the LV production to iCELLis 500, being able to produce up to 180 L of harvest material in one run with perfusion. The following challenge considers the purification and concentration of the product to meet titer and purity requirements for clinical use. We have developed a downstream process, beginning with clarification, buffer exchange, and concentration, by tangential flow filtration. This is followed by a purification step using single membrane-based anion exchange chromatography and final formulation with tangential flow filtration. Different materials and conditions were compared to optimize the process, especially for the chromatography step that has been the bottleneck in lentiviral vector purification scale-up. The final infectious titer of the lentiviral vector product manufactured using the optimized scale-up process was determined to be 1.97 × 109 transducing units (TU)/mL, which can be considered as a high titer for lentiviral vectors.

Benchmarking of Scale-X Bioreactor System in Lentiviral and Adenoviral Vector Production.

We have previously produced viral vectors (lentiviral vector, adenoviral vector, and adeno-associated viral vector) in small and in commercial scale in adherent cells using Pall fixed-bed iCELLis® bioreactor. Recently, a company called Univercells has launched a new fixed-bed bioreactor with the same cell growth surface matrix material, but with different fixed-bed structure than is used in iCELLis bioreactor. We sought to compare the new scale-X™ hydro bioreactor (2.4 m2) and iCELLis Nano system (2.67 m2) to see if the difference has any effect on cell growth or lentiviral vector and adenoviral vector productivity. Runs were performed using parameters optimized for viral vector production in iCELLis Nano bioreactor. Cell growth was monitored by counting nuclei, as well as by following glucose consumption and lactate production. In both bioreactor systems, cells grew well, and the cell distribution was found quite homogeneous in scale-X bioreactor. Univercells scale-X bioreactor was proven to be at least equally efficient or even improved in both lentiviral vector and adenoviral vector production. Based on the results, the same protocol and parameters used in viral vector production in iCELLis bioreactor can also be successfully used for the production in scale-X bioreactor system.

Preclinical Proof-of-Concept, Analytical Development, and Commercial Scale Production of Lentiviral Vector in Adherent Cells.

The therapeutic efficacy of a lentiviral vector (LV) expressing the herpes simplex virus thymidine kinase (HSV-TK) was studied in an immunocompetent rat glioblastoma model. Intraperitoneal ganciclovir injections (50 mg/kg/day) were administered for 14 consecutive days, resulting in reduced tumor volumes as monitored by MRI. Survival analyses revealed a significant improvement among the LV-expressing HSV-TK (LV-TK)/ganciclovir-treated animals when compared to non-treated control rats. However, a limiting factor in the use of LV has been the suboptimal small-scale production in flasks. Our aim during the translation phase, prior to entering the final pre-clinical and early clinical phases, was to develop a scalable, robust, and disposable manufacturing process for LV-TKs. We also aimed to minimize future process changes and enable production upscaling to make the process suitable for larger patient populations. The upstream process relies on fixed-bed iCELLis technology and transient plasmid transfection. This is the first time iCELLis 500 commercial-scale bioreactor was used for LV production. A testing strategy to determine the pharmacological activity of LV-TK drug product by measuring cell viability was developed, and the specificity of the potency assay was also proven. In this paper we focus on upstream process development while showing analytical development and the proof-of-concept of LV-TK functionality.

Process Development of Adenoviral Vector Production in Fixed Bed Bioreactor: From Bench to Commercial Scale.

Large-scale vector manufacturing for phase III and beyond has proven to be challenging. Upscaling the process with suspension cells is increasingly feasible, but many viral production applications are still applicable only in adherent settings. Scaling up the adherent system has proven to be troublesome. The iCELLis(®) disposable fixed-bed bioreactors offer a possible option for viral vector manufacturing in large quantities in an adherent environment. In this study, we have optimized adenovirus serotype 5 manufacturing using iCELLis Nano with a cultivation area up to 4 m(2). HEK293 cell cultivation, infection, and harvest of the virus (by lysing the cells inside the bioreactor) proved possible, reaching total yield of up to 1.6×10(14) viral particles (vp)/batch. The iCELLis 500 is designed to satisfy demand for large-scale requirements. Inoculating a large quantity of cell mass into the iCELLis 500 was achieved by first expanding the cell mass in suspension. Upscaling the process into an iCELLis 500/100 m(2) cultivation area cassette was practical and produced up to 6.1×10(15) vp. Flask productivity per cm(2) in iCELLis Nano and iCELLis 500 was in the same range. As a conclusion, we showed for the first time that iCELLis 500 equipment has provided an effective way to manufacture large batches of adenoviral vectors.