A Metastructure Based on Amorphous Carbon for High Efficiency and Selective Solar Absorption.

Efficient solar thermal conversion is crucial for renewable clean energy technologies such as solar thermal power generation, solar thermophotovoltaic and seawater desalination. To maximize solar energy conversion efficiency, a solar selective absorber with tailored absorption properties designed for solar applications is indispensable. In this study, we propose a broadband selective absorber based on amorphous carbon (a-C) metamaterials that achieves high absorption in the ultraviolet (UV), visible (Vis) and near-infrared (NIR) spectral ranges. Additionally, through metal doping, the optical properties of carbon matrix materials can be modulated. We introduce Ti@a-C thin film into the nanostructure to enhance light absorption across most of the solar spectrum, particularly in the NIR wavelength band, which is essential for improving energy utilization. The impressive solar absorptivity and photothermal conversion efficiency reach 97.8% and 95.6%, respectively. Notably, these superior performances are well-maintained even at large incident angles with different polarized states. These findings open new avenues for the application of a-C matrix materials, especially in fields related to solar energy harvesting.

Reducing optical loss of dual-ion beam sputtered HfO2 films via optimization of coating and annealing parameters.

HfO2 films are widely used for optical coatings due to the high refractive index and low absorption, especially in the ultraviolet (UV) band. In this work, HfO2 film samples were prepared with the optimized assistant source power and deposition temperature by dual-ion beam sputtering (DIBS), followed by annealing treatments in vacuum and atmosphere, respectively. For samples with different annealing temperatures from 200 to 450 °C, the microstructure, morphology, film stress and optical properties from 200 to 1000 nm were systematically investigated. A monoclinic phase, a refractive index inhomogeneity along the film thickness and an absorption of shoulder-shape in the 250-300 nm band were found in the as-deposited samples. For samples annealed in vacuum, 400 °C annealing leaded to more oxygen defects, which in turn caused aggravated UV absorption. For samples annealed in atmosphere, the shoulder-shaped absorption weakened obviously above 300 °C annealing, which was suspected due to the reduction of oxygen defects during the crystallization process with sufficient oxygen. Scattering loss was investigated and found negligible for as-deposited and annealed samples. Additionally, film stress varied from compressive state to tensile state with increasing annealing temperature, and the zero-stress temperature is between 300-350 °C, which is due to the obvious crystallization behavior. Production methods and physical mechanisms for low absorption and scattering loss DIBS deposited HfO2 films were proposed and discussed in detail.

Enhanced Near-Infrared Ultra-Narrow Absorber Based on a Dielectric Nano-Resonant Ring for Refractive Index Sensing.

In this paper, a plasmon resonance-enhanced narrow-band absorber based on the nano-resonant ring array of transparent conductive oxides (TCOs) is proposed and verified numerically. Due to the unique properties of TCOs, the structure achieves an ultra-narrowband perfect absorption by exhibiting a near-field enhancement effect. Consequently, we achieve a peak absorption rate of 99.94% at 792.2 nm. The simulation results indicate that the Full Width Half Maximum (FWHM) can be limited to within 8.8 nm. As a refractive index sensor, the device reaches a sensitivity S of 300 nm/RIU and a Figure of Merit (FOM) value of 34.1 1/RIU. By analyzing the distribution characteristics of the electromagnetic field at the 792.2 nm, we find high absorption with a narrow FWHM of the ITO nano-resonant ring (INRR) owing to plasmon resonance excited by the free carriers at the interface between the metal and the interior of the ITO. Additionally, the device exhibits polarization independence and maintains absorption rates above 90% even when the incident formed by the axis perpendicular to the film is greater than 13°. This study opens a new prospective channel for research into TCOs, which will increase the potential of compact photoelectric devices, such as optical sensing, narrowband filtering, non-radiative data transmission and biomolecular manipulation.

Low polarization-sensitive ultra-broadband anti-reflection coatings with improved reliability.

Broader spectra, lower reflectivity and higher reliability are the performance requirements for broadband antireflective (BBAR) films. In this work, a BBAR film structure was proposed, which maintains extremely low reflectivity, ultra-wide spectra, low polarization sensitivity and practical reliability. The BBAR film consists of a dense multilayer interference stack on the bottom and a nano-grass-like alumina (NGLA) layer with a gradient low refractive index distribution on the top. The film was deposited by atomic layer deposition, while the NGLA layer was formed by means of a hot water bath on Al2O3 layer. The top NGLA layer has extremely high porosity and ultra-low refractive index, along with extremely fragile structure. To surmount the fragility of NGLA layer, a sub-nano layer of SiO2 was grown by atomic layer deposition to solidify its structure and also to adjust the refractive index with different thicknesses of SiO2. Finally, in the wide wavelength range of 400-1100 nm, the average transmittance of the double-sided coated fused quartz reaches 99.2%. The absorption, light scattering, reliability and polarization characteristics of BBAR films were investigated. An optimized BBAR film with low polarization-sensitivity and improved reliability was realized, which should be potentially promising for application in optical systems.

Optimization of optical and structural properties of Al2O3/TiO2 nano-laminates deposited by atomic layer deposition for optical coating.

Optimizing the atomic layer deposition (ALD) process of films is particularly important in preparing multilayer interference films. In this work, a series of Al2O3/TiO2 nano-laminates with a fixed growth cycle ratio of 1:10 were deposited on Si and fused quartz substrates at 300 °C by ALD. The optical properties, crystallization behavior, surface appearance and microstructures of those laminated layers were systematically investigated by spectroscopic ellipsometry, spectrophotometry, X-ray diffraction, atomic force microscope and transmission electron microscopy. By inserting Al2O3 interlayers into TiO2 layers, the crystallization of the TiO2 is reduced and the surface roughness becomes smaller. The TEM images show that excessively dense distribution of Al2O3 intercalation leads to the appearance of TiO2 nodules, which in turn leads to increased roughness. The Al2O3/TiO2 nano-laminate with a cycle ratio 40:400 has relatively small surface roughness. Additionally, oxygen-deficient defects exist at the interface of Al2O3 and TiO2, leading to evident absorption. Using O3 as an oxidant instead of H2O for depositing Al2O3 interlayers was verified to be effective in reducing absorption during broadband antireflective coating experiments.

Quasi-Freeform Metasurfaces for Wide-Angle Beam Deflecting and Splitting.

Metasurfaces attracted extensive interests due to their outstanding ability to manipulate the wavefront at a subwavelength scale. In this study, we demonstrated quasi-freeform metasurfaces in which the radius, location, and height of the nanocylinder building blocks were set as optimized structure parameters, providing more degrees of freedom compared with traditional gradient metasurfaces. Given a desired wavefront shaping objective, these structure parameters can be collectively optimized utilizing a hybrid optimized algorithm. To demonstrate the versatility and feasibility of our method, we firstly proposed metasurfaces with deflecting efficiencies ranging from 86.2% to 94.8%, where the deflecting angles can vary in the range of 29°-75.6°. With further study, we applied our concept to realize a variety of high-efficiency, wide-angle, equal-power beam splitters. The total splitting efficiencies of all the proposed beam splitters exceeded 89.4%, where a highest efficiency of 97.6%, a maximum splitting angle of 75.6°, and a splitting uniformity of 0.33% were obtained. Considering that various deflecting angles, and various splitting channels with different splitting angles, can be realized by setting the optical response of metasurfaces as the optimization target, we believe that our method will provide an alternative approach for metasurfaces to realize desired wavefront shaping.

Near Perfect Absorber for Long-Wave Infrared Based on Localized Surface Plasmon Resonance.

In recent years, broadband absorbers in the long-wave infrared (LWIR) spectrum have shown great scientific value and advantages in some areas, such as thermal imaging and radiation modulation. However, designing a broadband absorber with an ultra-high absorption rate has always been a challenge. In this paper, we design a near perfect absorber that is highly tunable, angle insensitive, and has polarization independence for LWIR. By using multi-mode localized surface plasmon resonance (LSPR) of a surface metal structure, the absorber achieves a very high absorption average of 99.7% in wavelengths from 9.7 µm to 12.0 µm. For incident light, the meta-structure absorber exhibits excellent polarization independence. When the incident angle increases from 0° up to 60°, the absorption rate maintains over 85%. By modulating the size of the structure, the meta-structure absorber can also achieve a high absorption rate of 95.6%, covering the entire LWIR band (8-14 µm in wavelength). This meta-structure absorber has application prospects in infrared detecting, infrared camouflage, radiation cooling, and other fields.

Plasmonic Nanostructures for Broadband Solar Absorption Based on Synergistic Effect of Multiple Absorption Mechanisms.

The growing attention to solar energy has motivated the development of highly efficient solar absorbers. In this study, a high-performance meta-structure solar absorber (MSSA) based on a tungsten truncated cone structure combined with a film resonator structure has been proposed and demonstrated numerically. The designed structure exhibits over 97.1% total solar absorption efficiency and less than 8.5% total thermal emissivity under the condition of one solar concentration, hence reaching 91.6% photothermal conversion efficiency at 100 °C. In addition, the proposed MSSA achieves promisingly high spectrum absorptance of over 97.8% in the ultraviolet, visible and near-infrared regions (280-1700 nm). Based on the simulation analysis, the enhanced light absorption is attributed to the synergistic effect of the magnetic polaritons (MPs) on the nanostructured metal surface, the cavity plasmon resonance between the truncated cones that can form light-trapping structures, the magnetic field resonance of the metal-insulator-metal (MIM) optical resonator and the inherent loss of tungsten. The impedance of the absorber is well matched with free space. Furthermore, the optimized absorber shows great potential in solar thermophotovoltaic applications that require wide-angle polarization-independent ultra-broadband light response characteristics.

Double-sided optical coating of strongly curved glass by atomic layer deposition.

A reaction chamber of atomic layer deposition (ALD) was developed for simultaneous coating on the inner and outer surfaces of a large-size and strongly curved glass bowl. The inner surface ALD process was in a showerhead reaction mode and the outer surface ALD process was in a cross-flow reaction mode. Blue reflection (BR) film of 400 nm wavelength and broadband antireflection (BBAR) film of 400-700 nm wavelength were coated on different glass bowls by ALD. The spectral uniformity of both coated bowls was studied. The measured spectra at multiple positions of the glass bowl with the BBAR coating show better spectral uniformity along the circumference than the depth. The spectral deviation is mainly caused by the non-uniformity of the film on the outer surface (<±3%), and the film on the inner surface has good uniformity along both the circumference and the depth (<±0.7%). The growth rate of the outer film was reduced by 10% on average compared to that of the inner film due to the different gas flow mode.

Ground-to-satellite quantum teleportation.

An arbitrary unknown quantum state cannot be measured precisely or replicated perfectly. However, quantum teleportation enables unknown quantum states to be transferred reliably from one object to another over long distances, without physical travelling of the object itself. Long-distance teleportation is a fundamental element of protocols such as large-scale quantum networks and distributed quantum computation. But the distances over which transmission was achieved in previous teleportation experiments, which used optical fibres and terrestrial free-space channels, were limited to about 100 kilometres, owing to the photon loss of these channels. To realize a global-scale 'quantum internet' the range of quantum teleportation needs to be greatly extended. A promising way of doing so involves using satellite platforms and space-based links, which can connect two remote points on Earth with greatly reduced channel loss because most of the propagation path of the photons is in empty space. Here we report quantum teleportation of independent single-photon qubits from a ground observatory to a low-Earth-orbit satellite, through an uplink channel, over distances of up to 1,400 kilometres. To optimize the efficiency of the link and to counter the atmospheric turbulence in the uplink, we use a compact ultra-bright source of entangled photons, a narrow beam divergence and high-bandwidth and high-accuracy acquiring, pointing and tracking. We demonstrate successful quantum teleportation of six input states in mutually unbiased bases with an average fidelity of 0.80 ± 0.01, well above the optimal state-estimation fidelity on a single copy of a qubit (the classical limit). Our demonstration of a ground-to-satellite uplink for reliable and ultra-long-distance quantum teleportation is an essential step towards a global-scale quantum internet.

Fabrication of short-wavelength infrared dual-band-pass filter based on combination of Fabry-Perot filters.

Dual-band-pass filters are key optical components in dual-spectral detection applications; it is imperative to fabricate them in a relatively simple way for practical use. In this paper, a dual-band-pass filter working in short-wavelength infrared is developed by the combination of two Fabry-Perot (F-P) filters, each having a transparent band. These two filters are designed separately, and deposited at different sides of a substrate. The total layers' number of the dual-band-pass filter is limited to 34; these layers are monitored by the method of direct transmittance level cut monitoring with a single monitor wavelength. The percent of optical extrema monitoring strategy is adopted in the deposition. The spectra of the F-P filters and the dual-band-pass filter are tested. The shorter pass-band's average transmittance is above 84%, the longer one is above 88%, and four of the pass-bands' edge steepness values are 1.4%,2.8%,1.9%, and 1.7%.

An optical monitoring method for depositing dielectric layers of arbitrary thickness using reciprocal of transmittance.

An approach extracting information of both optical monitoring signal and phase thickness of deposited layer on a trace diagram is proposed. Realtime fitting and calculation are performed to get both practical thickness and refractive index of deposited layer with the assist of quartz crystal monitoring for keeping steady rate of deposition. Monitoring error of thickness using this approach is analyzed. It was used to obtain the refractive indices and thickness of Ge layer and SiO layer in in situ measurement mode, and the results were compared with those of ex-situ spectral measurement using infrared spectrometer. The effectiveness of the proposed monitoring method was verified by fabricating narrow bandpass filter consisting of quarter-wave and non-quarter-wave layers.

Bioactive constituents from the green alga Caulerpa racemosa.

Three diterpenoids, including a pair of epimers, racemobutenolids A and B (1 and 2), and 4',5'-dehydrodiodictyonema A (3), an α-tocopheroid, α-tocoxylenoxy (8), and an 28-oxostigmastane steroid, (23E)-3ß-hydroxy-stigmasta-5,23-dien-28-one (11), together with 12 known compounds, were isolated from the green alga Caulerpa racemosa. The structures of the new compounds were elucidated by detailed analysis of spectroscopic data, and by comparison with data for related known compounds. The epimers (1 and 2) are two unusual diterpenoid lactones bearing a ß-methyl-γ-substituted butenolide moiety, and 3 and 8 represent the first naturally occurring natural products with a hematinic acid ester group and 3,5-dimethylphenoxy functionality, respectively. The enzyme inhibitory activities of the isolated compounds were evaluated in vitro against PTP1B and related PTPs (TCPTP, CDC25B, LAR, SHP-1, and SHP-2). Compounds 3, 5, 6, and 9-14 exhibited different levels of PTP1B inhibitory activities with IC50 values ranging from 2.30 to 50.02µM. Of these compounds, 3, 9, and 11 showed the most potent inhibitory activities towards PTP1B with IC50 values of 2.30, 3.85, and 3.80µM, respectively. More importantly, the potent PTP1B inhibitors 3, 9, and 11 also displayed high selectivity over the highly homologous TCPTP and other PTPs. Also, the neuroprotective effects of the isolates against Aß25-35-induced cell damage in SH-SY5Y cells were investigated. Compounds 10, 11, and 14 exhibited significant neuroprotective effects against Aß25-35-induced SH-SY5Y cell damage with 11.31-15.98% increases in cell viability at 10µM. In addition, the cytotoxic activities of the isolated compounds were tested against the human cancer cell lines A-549 and HL-60.

Broadband infrared beam splitter for spaceborne interferometric infrared sounder.

A broadband infrared beam splitter (BS) on ZnSe substrate used for the spaceborne interferometric infrared sounder (SIIRS) is studied in the spectral range of 4.44-15 µm. Both broadband antireflection coating and broadband beam-splitter coating in this BS are designed and tested. To optimize the optical properties and the stability of the BS, suitable infrared materials were selected, and improved deposition techniques were applied. The designed structures matched experimental data well, and the properties of the BS met the application specification of SIIRS.

In situ atom scale visualization of domain wall dynamics in VO2 insulator-metal phase transition.

A domain wall, as a device, can bring about a revolution in developing manipulation of semiconductor heterostructures devices at the atom scale. However, it is a challenge for these new devices to control domain wall motion through insulator-metal transition of correlated-electron materials. To fully understand and harness this motion, it requires visualization of domain wall dynamics in real space. Here, domain wall dynamics in VO2 insulator-metal phase transition was observed directly by in situ TEM at atom scale. Experimental results depict atom scale evolution of domain morphologies and domain wall exact positions in (202) and (040) planes referring to rutile structure at 50°C. In addition, microscopic mechanism of domain wall dynamics and accurate lattice basis vector relationship of two domains were investigated with the assistance of X-ray diffraction, ab initio calculations and image simulations. This work offers a route to atom scale tunable heterostructure device application.

Racemosin C, a novel minor bisindole alkaloid with protein tyrosine phosphatase-1B inhibitory activity from the green alga Caulerpa racemosa.

A novel minor bisindole alkaloid, racemosin C (1), characterized by a naturally unprecedented 8-hydroxy-2,4,6-cyclooctatrienone ring fused with two indole systems, was isolated from the green alga Caulerpa racemosa, together with one known related metabolite, caulersin (2). The structure of 1 was elucidated on the basis of extensive spectroscopic analysis, and by comparison with the data of related known compounds. A plausible biosynthetic pathway of 1 was proposed. Compounds 1 and 2 exhibited significant PTP1B inhibitory activity with IC50 values of 5.86 ± 0.57 and 7.14 ± 1.00 µM, respectively, compared with the positive control oleanolic acid (IC50 = 3.03 ± 0.20 µM). On the basis of the data obtained, the Caulerpa bisindole alkaloids may be considered as a new class of PTP1B inhibitors.

A seco-laurane sesquiterpene and related laurane derivatives from the red alga Laurencia okamurai Yamada.

A ring-cleaved sesquiterpene, named seco-laurokamurone, four laurane-type sesquiterpenes, laurepoxyene, 3ß-hydroperoxyaplysin, 3α-hydroperoxy-3-epiaplysin, and 8,10-dibromoisoaplysin, one laurokamurane-type sesquiterpene, laurokamurene D, and one bisabolane-type sesquiterpene, (5S)-5-acetoxy-ß-bisabolene, have been isolated from a re-collection of the red alga Laurencia okamurai Yamada, together with six other known sesquiterpenes. Their structures, including relative configuration, were elucidated by detailed analysis of spectroscopic data, and by comparison with data for related known compounds. In addition, on the basis of chemical conversions, degradation results, and biogenetic considerations, the absolute configurations of several of these compounds were also tentatively proposed. seco-Laurokamurone possesses an unprecedented carbon skeleton, formed from an oxidative cleavage of the laurokamurane skeleton, and laurokamurene D represents the fourth example of a laurokamurane-type sesquiterpene from a natural source. The in vitro antifungal activity of many of these compounds was evaluated against four fungi (Cryptococcus neoformans, Candida glabrata, Trichophyton rubrum, and Aspergillus fumigatus), as well as assessing cytotoxicity against HL-60 and A-549 human cancer cell lines. The compounds studied displayed moderate activities, relative to controls.

Design of non-polarizing cut-off filters based on dielectric-metal-dielectric stacks.

Cut-off filters are usually operating at oblique incidence and exhibit polarization dependence properties. We propose a simple approach to design cut-off filters with low linear polarization sensitivity (LPS) based on dielectric-metal-dielectric (DMD) stacks. The designing method is derived from the theory of optical film characteristic matrix. The admittance loci of the film are adjusted to achieve similar spectral properties of s- and p-polarized light at oblique incidence. Different film structures are designed non-polarizing at different angles of incidence with the method. The results show that the designing method is efficient for designing non-polarizing cut-off filters, which are widely used in non-polarizing optical system.

Racemosins A and B, two novel bisindole alkaloids from the green alga Caulerpa racemosa.

Racemosin A (1), a structurally unique bisindole alkaloid possessing the seco-indolo[3,2-a]carbazole skeleton with two uncommon indolinenone units both conjugated with a methyl propenoate moiety, and its unusual cyclized derivative, racemosin B (2), were isolated from the green alga Caulerpa racemosa, together with the most commonly encountered pigment in the genus Caulerpa, caulerpin (3). Their structures were elucidated by extensive spectroscopic analysis and by comparison with data for related known compounds. A plausible biosynthetic pathway of 1 and 2 was proposed. In a neuro-protective assay, compound 1 significantly attenuated the Aß2(5-35)-induced SH-SY5Y cell damage with a 14.6% increase in cell viability at the concentration of 10µM when compared to epigallocatechin gallate (EGCG, 16.57% increase at 10 µM) as the positive control.

Caulerprenylols A and B, two rare antifungal prenylated para-xylenes from the green alga Caulerpa racemosa.

Two new prenylated para-xylenes, named caulerprenylols A (1) and B (2), were isolated from the green alga Caulerpa racemosa, collected from the Zhanjiang coastline, China. The structures of the two metabolites were elucidated on the basis of detailed spectroscopic analysis. This is the first report of prenylated para-xylenes from marine algae and from marine organisms as well. Moreover, caulerprenylol B (2) is also characterized by an uncommon indane ring system. In in vitro bioassays, the new compounds exhibited a broad spectrum of antifungal activity against Candida glabrata (537), Trichophyton rubrum (Cmccftla), and Cryptococcus neoformans (32609) with MIC80 values between 4 and 64 µg/mL when compared to amphotericin B (MIC80 values of 2.0, 1.0, and 4.0 µg/mL, respectively) as a positive control and showed no growth inhibition activity against the tumor cells HL60 and A549.