A Comparison of Intracerebral Transplantation of RMNE6 Cells and MSCs on Ischemic Stroke Models.

BACKGROUND: Cell therapy using stem cells is promising for stroke patients; however, stem cell therapy faces many problems. RMNE6 cells, a new stem cell line, are superior to other stem cell lines. Mesenchymal stem cells (MSCs) appear to be a promising candidate for stroke patients. In the current study, we determined the therapeutic effects of RMNE6 cells on a middle cerebral artery occlusion (MCAO) model of rats and identified the differences between RMNE6 cells and MSCs with respect to therapeutic effects. MATERIAL AND METHODS: RMNE6 and Enhanced green fluorescent protein (EGFP)-labeled MSCs were transplanted into the ischemic brains of MCAO rats. The behavior of rats was examined using the rotarod test with neuroradiologic assessment using magnetic resonance imaging (MRI). Four weeks after cell transplantation, the rats were investigated by immunofluorescence staining to explore the fates of the graft cells. RESULT: After transplantation, RMNE6 cells and MSCs survived and migrated toward the injured area without differentiation. There was tumorigenesis in the brains transplanted with RMNE6 cells. Cell transplantation had no effects on the size of the ischemic volume. The behavior of the model animals showed no significant improvement. CONCLUSION: MSCs are still the preferred cells for cell replacement in stroke therapy, while RMNE6 cells need to be modified.

Preparation of poly(lactic acid)/sintered hydroxyapatite composite biomaterial by supercritical CO2.

Based on a kind of sintered hydroxyapatite (HA) with a good cytocompatibility, a series of polylactic acid (PLA) and PLA/HA with the various PLA:HA weight ratio (5:5, 4:6, 3:7, 2:8, 1:9) were fabricated by supercritical CO2. The physical and chemical properties were evaluated by pH, degradation, water absorption, porosity, density, mechanical property, and cytotoxicity respectively. With the increase of HA content, the pH value and porosity increased gradually, while weight loss rate and the density showed a gradual downward trend. Existence of HA can drastically improve the hydroscopicity of PLA scaffolds. The compression strength values slightly increased (p>0.05) from 39.96 MPa of PLA to 45.00 MPa of PLA/HA with the ratio of 7:3, subsequently, the values decreased (p<0.05) from 43.29 MPa (8:2) to 19.00 MPa (9:1). While the modulus of elasticity decreased (p<0.05) from 5.89 to 1.84 GPa with increasing HA content. The PLA/HA (8:2) promoted cell proliferation more significantly than any of other groups (p<0.05). Based on the results, the overall properties of porous scaffolds are the optimal when the weight ratio of PLA/HA is 8:2. Its pH, porosity, density, compression strength, and elasticity modulus are 7.39, 83.0%, 0.60g/cm-3, 34.1 MPa and 2.63 GPa, respectively. SEM observation presented a homogeneous distribution of HA in PLA matrix and a foam-like structure comprising interconnected pores.

Preparation and biocompatibility of demineralized bone matrix/sodium alginate putty.

Demineralized bone matrix (DBM) powder is widely used for bone regeneration due to its osteoinductivity and osteoconductivity. However, difficulties with handling, tendency to migrate from graft sites and lack of stability after surgery sometimes limit the clinical utility of this material. In this work, the possibility of using sodium alginate (ALG) carrier to deliver DBM powder was assessed. DBM-ALG putty with the DBM:ALG weight ratio of 5:5, 6:4, 7:3, 8:2 were prepared, respectively. The properties of the formed composite, including discrete degree, washout property, pH, equilibrium swelling as well as cytotoxicity in vivo, were adopted to ascertain the optimal ratio of DBM and ALG. The discrete diameter increased from 1.25 cm (5:5) to 2.08 cm (8:2) with the increase of DBM content. There was significant difference between the 8:2 group and the other groups in discrete diameter. The ratio of DBM had a significant effect on the swelling value. The pH of composites showed an increase trend with the DBM ratio's increase, when the ratio reached 7:3, the pH (7.22) was approximately equal to the body fluid. The proliferation of MC3T3-E1 cells was inhibited in the 5:5, 6:4 and 7:3 groups, while a slightly increased in the 8:2 group. The DBM-ALG with the optimal ratio of 7:3 was confirmed based on the results of the above mentioned. The histocompatibility of DBM-ALG (7:3) was examined using a rat model in which the materials were implanted subcutaneously, compared with the polyethylene, ALG and DBM. The study in vivo showed DBM-ALG (7:3) had a lower inflammatory response than DBM, a higher vascularization than ALG. The osteoinduction of DBM-ALG (7:3) was evaluated by co-culturing with MC3T3-E1 in vitro, compared with the DMEM, ALG and DBM. The results indicated calcification area in the DBM-ALG group was similar to that in the DBM group, larger than ALG group and DMEM group. The DBM-ALG (7:3) putty is promising as a directly injectable graft for repair of bone defect.

Fasudil Enhances Therapeutic Efficacy of Neural Stem Cells in the Mouse Model of MPTP-Induced Parkinson's Disease.

Bone marrow-derived neural stem cells (NSCs) are ideal cells for cellular therapy because of their therapeutic potential for repairing and regenerating damaged neurons. However, the optimization of implanted cells and the improvement of microenvironment in the central nervous system (CNS) are still two critical elements for enhancing therapeutic effect. In the current study, we observed the combined therapeutic effect of NSCs with fasudil in an 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced Parkinson's disease (PD) mouse model and explored the possible cellular and molecular mechanisms. The results clearly show that combined treatment of NSCs with fasudil further improves motor capacity of PD mice, thus exerting double effect in treating MPTP-PD. The combined intervention more effectively protected dopaminergic (DA) neurons from loss in the substantia nigra pars compacta (SNpc), which may be associated with the increased number and survival of transplanted NSCs in the brain. Compared with the treatment of fasudil or NSCs alone, the combined intervention more effectively inhibited the activation and aggregation of microglia and astrocytes, displayed stronger anti-inflammatory and antioxidant effects, induced more neurotrophic factor NT-3, and affected the dynamic homeostasis of NMDA and AMPA receptors in MPTP-PD mice. Our study demonstrates that intranasal administration of NSCs, followed by fasudil administration, is a promising cell-based therapy for neuronal lesions.

Synergistic and Superimposed Effect of Bone Marrow-Derived Mesenchymal Stem Cells Combined with Fasudil in Experimental Autoimmune Encephalomyelitis.

Bone marrow-derived mesenchymal stem cells (MSCs) are the ideal transplanted cells of cellular therapy for promoting neuroprotection and neurorestoration. However, the optimization of transplanted cells and the improvement of microenvironment around implanted cells are still two critical challenges for enhancing therapeutic effect. In the current study, we observed the therapeutic potential of MSCs combined with Fasudil in mouse model of experimental autoimmune encephalomyelitis (EAE) and explored possible mechanisms of action. The results clearly show that combined intervention of MSCs and Fasudil further reduced the severity of EAE compared with MSCs or Fasudil alone, indicating a synergistic and superimposed effect in treating EAE. The addition of Fasudil inhibited MSC-induced inflammatory signaling TLR-4/MyD88 and inflammatory molecule IFN-γ, IL-1ß, and TNF-α but did not convert M1 microglia to M2 phenotype. The delivery of MSCs enhanced the expression of glial cell-derived neurotrophic factor (GDNF) and brain-derived neurotrophic factor (BDNF) compared with that of Fasudil. Importantly, combined intervention of MSCs and Fasudil further increased the expression of BDNF and GDNF compared with the delivery of MSCs alone, indicating that combined intervention of MSCs and Fasudil synergistically contributes to the expression of neurotrophic factors which should be related to the expression of increased galactocerebroside (GalC) compared with mice treated with Fasudil and MSCs alone. However, a lot of investigation is warranted to further elucidate the cross talk of MSCs and Fasudil in the therapeutic potential of EAE/multiple sclerosis.

[BIOCOMPATIBILITY OF POROUS POLY LACTIC ACID/BONE MATRIX GELATIN COMPOSITE BIOMATERIALS FOR BONE REPAIR].

OBJECTIVE: To evaluate the biocompatibility of poiy lactic acid/bone matrix gelatin (PLA/BMG) composite biomaterial so as to lay a foundation for bone defect repair. METHODS: Rats' MC3T3-E1 cells were cultured with leaching solution of PIJA/BMG and PLA material respectively for 7 days. The cell proliferation rate was tested by MTT and cell toxicity grading was carried out everyday. The PLA/BMG and MG3T3-E1 cells were co-cultured, the cell shape and proliferation were observed by inverted phase contrast microscope at 1, 3, and 5 days and cell adhesion by scanning electron microscope at 5 days. The PLA and PLA/BMG were implanted subcutaneously ilS Wistar rats. The histological observation was done, and the thickness of fibrous membrane, the number of inflammatory cells, and the vascularization area were measured at postoperative 2nd, 4th, and 8th week. RESULTS: The tests for cytotoxicity in vitro showed that the cell proliferation rates were over 100% and the cell cytotoxic grades were grade 0 at 1-7 days in PLA/BMG group. While in PLA group, the cell proliferation rates were less than 100% and the cell cytotoxic grades were grade 1 at 2, 4, and 7 days. After co-culture of PLA/BMG and MC3T3-E1 cells, cells grew on the surface and in the pores of PLA! BMG, and the cellular morphology was triangle or polygon with abundant microvillus on the surface. After subcutaneous implantation, the rats survived to the end of experiment, and incision healed well. PLA was wrapped by connective tissue where there were a lot of lymphocytes and neutrophiic granulocytes. The cells and tissue grew slowly in PLA. The PLA! BMG materials were wrapped by utile connective tissue where there were a few inflammatory cells. The connective tissue growth was observed in the center of PLA/BMG. There was no significant difference in the thickness of fibrous membrane between 2 groups at each time point (P>0.05). The number of inflammatory cells of PLA/BMG group were significantly less than those in PLA group at 2, 4, and 8 weeks (P<0.05); the vascularization area was significantly larger than that in PLA group (P<0.05). CONCLUSION: PLA/BMG composite biomaterials prepared by super critical-CO2 technique are good in cell and tissue biocompatibilty.

Safflower Yellow regulates microglial polarization and inhibits inflammatory response in LPS-stimulated Bv2 cells.

Activated microglia, especially polarized M1 cells, produce pro-inflammatory cytokines and free radicals, thereby contributing directly to neuroinflammation and various brain disorders. Given that excessive or chronic neuroinflammation within the central nervous system (CNS) exacerbates neuronal damage, molecules that modulate neuroinflammation are candidates as neuroprotective agents. In this study, we provide evidence that Safflor yellow (SY), the main active component in the traditional Chinese medicine safflower, modulates inflammatory responses by acting directly on BV2 microglia. LPS stimulated BV2 cells to upregulate expression of TLR4-Myd88 and MAPK-NF-κB signaling pathways and to release IL-1ß, IL-6, TNF-α, and COX-2. However, SY treatment inhibited expression of TLR4-Myd88 and p-38/p-JNK-NF-κB, downregulated expression of iNOS, CD16/32, and IL-12, and upregulated CD206 and IL-10. In conclusion, our results demonstrate that SY exerts an anti-inflammatory effect on BV2 microglia, possibly through TLR-4/p-38/p-JNK/NF-κB signaling pathways and the conversion of microglia from inflammatory M1 to an anti-inflammatory M2 phenotype.

Protective effect of a novel Rho kinase inhibitor WAR-5 in experimental autoimmune encephalomyelitis by modulating inflammatory response and neurotrophic factors.

The Rho-kinase (ROCK) inhibitor Fasudil has proven beneficial in experimental autoimmune encephalomyelitis (EAE). Given the small safety window of Fasudil, we are looking for novel ROCK inhibitors, which have similar or stronger effect on EAE with greater safety. In this study, we report that WAR-5, a Y-27632 derivative, alleviates the clinical symptoms, attenuates myelin damage and reduces CNS inflammatory responses in EAE C57BL/6 mice at an extent similar to Fasudil, while exhibits less vasodilator and adverse reaction in vivo. WAR-5 inhibits ROCK activity, and selectively suppresses the expression of ROCK II in spleen, brain and spinal cord of EAE mice, especially in spinal cord, accompanied by decreased expression of Nogo. WAR-5 also regulates the imbalance of Th1/Th17 T cells and regulatory T cells, inhibits inflammatory microenvironment induced with NF-κB-IL-1ß pathway. Importantly, WAR-5 converts M1 toward M2 microglia/macrophages that are positively correlated with BDNF and NT-3 production. Taken together, WAR-5 exhibits therapeutic potential in EAE by more selectively inhibits ROCK II, with a greater safety than Fasudil, and is worthy of further clinical study to clarify its clinical value.

Preparation of porous PLA/DBM composite biomaterials and experimental research of repair rabbit radius segmental bone defect.

Bone substitutes are used in wide range of orthopaedic application. An ideal bone substitute should exhibit superior osteoinductive and osteoconductive properties. Neither bio-derived materials nor synthetic materials can meet the needs of an ideal bone substitute. Preparation of composite materials is a promising way to improve properties of biomaterial. In this study, the porous poly lactic acid (PLA)/demineralized bone matrix (DBM) composite biomaterials prepared by supercritical CO2 technique were implanted to repair rabbit radius segmental bone defect. By comparing with PLA and bone autograft, the X-ray result and histological analysis showed the repair effect of PLA/DBM porous composite materials is significantly better than that of the PLA group and the blank control group, and is similar to autologous bone. The PLA/DBM can promote the healing of bone defects and can be used as a kind of ideal alternative materials to repair bone defects.

[Comparison of the clinical effect of complex transplantation with heterogenetic acellular dermal M(ADM) AND allogeneic ADM].

OBJECTIVE: To explore the short-term clinical effects of complex transplantation among the acellular dermal matrix(ADM) of heterogenic or allogeneic and autogenic split on the burnt wound as to find out a permanent substitution for the treatment on full skin thickness defect without scar. METHODS: Two kinds of ADM were used on the 18 patients with full thickness burn wound through complex transplantation with autogenic splits. The patients with medial-thickness autograft was used as control group. Survival rate was obtained 2 weeks after operation; contraction rate and the scores of Vancouver burn scale were obtained 8 weeks after operation. RESULTS: No significant difference was observed in survival rate among the three groups 2 weeks after operation(P > 0. 05); no significant difference was observed in contraction rate of autografts and scores of Vancouver burn scale among the three groups 8 weeks after operation (P > 0. 05). CONCLUSION ADM of heterogenic and ADM of allogeneic have similar effect on the reconstruction of skin, so the piglet ADM made in this way could be used as a substitution.

Calibration of Yucca Mountain unsaturated zone flow and transport model using porewater chloride data.

In this study, porewater chloride data from Yucca Mountain, NV are analyzed and modeled by three-dimensional chemical transport simulation and analytical methods. The simulation modeling approach is based on a continuum formulation of coupled multiphase fluid flow and tracer transport processes through fractured porous rock using a dual-continuum concept. Infiltration rate calibrations were performed using the porewater chloride data. Model results of chloride distributions were improved in matching the observed data with the calibrated infiltration rates. Statistical analyses of the frequency distribution for overall percolation fluxes and chloride concentration in the unsaturated zone system demonstrate that the use of the calibrated infiltration rates had an insignificant effect on the distribution of simulated percolation fluxes but significantly changed the predicted distribution of simulated chloride concentrations. An analytical method was also applied to model transient chloride transport. The method was verified by three-dimensional simulation results to be capable of capturing major chemical transient behavior and trends. Effects of lateral flow in the Paintbrush nonwelded unit on percolation fluxes and chloride distribution were studied by three-dimensional simulations with increased horizontal permeability. The combined results from these model calibrations furnish important information for the UZ model studies, contributing to performance assessment of the potential repository.

Analysis of flow behavior in fractured lithophysal reservoirs.

This study develops a mathematical model for the analysis of pressure behavior in fractured lithophysal reservoirs. The lithophysal rock is described as a tri-continuum medium, consisting of fractures, rock matrices, and cavities. In the conceptual model, fractures have homogeneous properties throughout and interact with rock matrices and cavities that have different permeabilities and porosities. Global flow occurs through the fracture network only, while rock matrices and cavities contain the majority of fluid storage and provide fluid drainage to the fractures. Interporosity flows between the triple media are described using a pseudosteady-state concept and the system is characterized by interporosity transmissivity ratios and storativity ratio of each continuum. Pressure behavior is analyzed by examining the pressure drawdown curves, the derivative plots, and the effects of the characteristic parameters. Typical pressure responses from fractures, matrices, and cavities are represented by three semilog straight lines; the transitions by two troughs below the stabilization lines in the derivative plots. The analytical solution to the proposed model is further verified using a numerical simulation. The analytical model has also been applied to a published field-buildup well test and is able to match the pressure buildup data.