Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-lasting Zinc Metal Batteries.

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8·1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

Dysregulated N6-methyladenosine modification in peripheral immune cells contributes to the pathogenesis of amyotrophic lateral sclerosis.

Amyotrophic lateral sclerosis (ALS) is a progressive neurogenerative disorder with uncertain origins. Emerging evidence implicates N6-methyladenosine (m6A) modification in ALS pathogenesis. Methylated RNA immunoprecipitation sequencing (MeRIP-seq) and liquid chromatography-mass spectrometry were utilized for m6A profiling in peripheral immune cells and serum proteome analysis, respectively, in patients with ALS (n = 16) and controls (n = 6). The single-cell transcriptomic dataset (GSE174332) of primary motor cortex was further analyzed to illuminate the biological implications of differentially methylated genes and cell communication changes. Analysis of peripheral immune cells revealed extensive RNA hypermethylation, highlighting candidate genes with differential m6A modification and expression, including C-X3-C motif chemokine receptor 1 (CX3CR1). In RAW264.7 macrophages, disrupted CX3CR1 signaling affected chemotaxis, potentially influencing immune cell migration in ALS. Serum proteome analysis demonstrated the role of dysregulated immune cell migration in ALS. Cell type-specific expression variations of these genes in the central nervous system (CNS), particularly microglia, were observed. Intercellular communication between neurons and glial cells was selectively altered in ALS CNS. This integrated approach underscores m6A dysregulation in immune cells as a potential ALS contributor.

Thalidomide suppresses migration and invasion of colorectal cancer cells by inhibiting HOXB7-mediated activation of the Wnt/ß-catenin signaling pathway.

Heaps of studies have verified the effects of thalidomide (THA) on colorectal cancer (CRC). Howbeit, the corresponding mechanism awaits illustration, which is the foothold of this study. Following the treatment of 0, 1.94, 7.75, or 19.36 µM THA, CRC cell viability, apoptosis, migration, and invasion were evaluated by methyl tetrazolium, flow cytometry, wound-healing, and transwell assays. Homeobox B7 (HOXB7) expression in CRC was analyzed and detected by bioinformatics analysis, quantitative real-time PCR or western blot. After the corresponding transfection or treatment with inhibitor of catenin-responsive transcription-3 (iCRT-3), abovementioned CRC cell biological behaviors as well as expression levels of HOXB7 and ß-catenin were evaluated. 7.75 and 19.36 µM THA dwindled CRC cell viability, migration, and invasion, and facilitated apoptosis. HOXB7 upregulation was detected in CRC cells, which promoted the viability, migration, invasion, and ß-catenin expression, and weakened the apoptosis of CRC cells. Also, HOXB7 upregulation counteracted the effects of THA on CRC cells. iCRT-3 restrained ß-catenin expression, viability, migration, and invasion, whereas promoting the apoptosis of CRC cells. In addition, iCRT-3 antagonized the effects of overexpressed HOXB7 on CRC cells. THA inhibits the migration and invasion of CRC cells, which is achieved by suppressing HOXB7-mediated activation of Wnt/ß-catenin signaling pathway.

Preparation, physicochemical and biological evaluation of chitosan Pleurotus ostreatus polysaccharides active films for food packaging.

The aim of this study was to create CS-POP composite films by blending Pleurotus ostreatus stalk polysaccharides (POP) and chitosan (CS). The effects of adding different concentrations (0 %, 0.25 %, 0.5 %, 0.75 %, and 1 %) of POP on the mechanical, barrier, and optical properties of the CS films were investigated. When the POP content is at 0.5 %, the tensile strength of the composite film reaches its maximum value at 13.691 MPa, showing a significant improvement compared to the tensile strength of the pure CS film. The structure of the CS and CS-POP composite films was characterized by FT-IR spectroscopy, XRD, TGA and SEM. The results indicate that due to the interaction between the two types of CS and POP, the formation of Schiff base, and the intermolecular hydrogen bonds between CS and POP, the addition of POP to CS films can result in a smoother and more stable crystalline structure in the composite film. The CS-POP composite films exhibited enhanced antioxidant and antibacterial activity compared to the CS films alone, with the highest DPPH scavenging activity of 72.43 %. The composite films also showed significant inhibitory effects on the growth of E. coli.

Mechanically recyclable melt-spun fibers from lignin esters and iron oxide nanoparticles: towards circular lignin materials.

The inferior thermoplastic properties have limited production of melt-spun fibers from lignin. Here we report on the controlled esterification of softwood kraft lignin (SKL) to enable scalable, solvent-free melt spinning of microfibers using a cotton candy machine. We found that it is crucial to control the esterification process as melt-spun fibers could be produced from lignin oleate and lignin stearate precursors with degrees of esterification (DE) ranging from 20-50%, but not outside this range. To fabricate a functional hybrid material, we incorporated magnetite nanoparticles (MNPs) into the lignin oleate fibers by melt blending and subsequent melt spinning. Thermogravimetric analysis and X-ray diffraction studies revealed that increasing the weight fraction of MNPs led to improved thermal stability of the fibers. Finally, we demonstrated adsorption of organic dyes, magnetic recovery, and recycling via melt spinning of the regular and magnetic fibers with 95% and 83% retention of the respective adsorption capacities over three adsorption cycles. The mechanical recyclability of the microfibers represents a new paradigm in lignin-based circular materials.

Salt Anion Amphiphilicity-Activated Electrolyte Cosolvent Selection Strategy toward Durable Zn Metal Anode.

One effective solution to inhibit side reactions and Zn dendrite growth in aqueous Zn-ion batteries is to add a cosolvent into the Zn(CF3SO3)2 electrolyte, which has the potential to form a robust solid electrolyte interface composed of ZnF2 and ZnS. Nevertheless, there is still a lack of discussion on a convenient selection method for cosolvents, which can directly reflect the interactions between solvent and solute to rationally design the electrolyte solvation structure. Herein, logP, where P is the octanol-water partition coefficient, a general parameter to describe the hydrophilicity and lipophilicity of chemicals, is proposed as a standard for selecting cosolvents for Zn(CF3SO3)2 electrolyte, which is demonstrated by testing seven different types of solvents. The solvent with a logP value similar to that of the salt anion CF3SO3- can interact with CF3SO3-, Zn2+, and H2O, leading to a reconstruction of the electrolyte solvation structure. To prove the concept, methyl acetate (MA) is demonstrated as an example due to its similar logP value to that of CF3SO3-. Both the experimental and theoretical results illustrate that MA molecules not only enter into the solvation shell of CF3SO3- but also coordinate with Zn2+ or H2O, forming an MA and CF3SO3- involved core-shell solvation structure. The special solvation structure reduces H2O activity and contributes to forming an anion-induced ZnCO3-ZnF2-rich solid electrolyte interface. As a result, the Zn||Zn cell and Zn||NaV3O8·1.5H2O cell with MA-involved electrolyte exhibit superior performances to that with the MA-free electrolyte. This work provides an insight into electrolyte design via salt anion chemistry for high-performance Zn batteries.

Deep flanking sequence engineering for efficient promoter design using DeepSEED.

Designing promoters with desirable properties is essential in synthetic biology. Human experts are skilled at identifying strong explicit patterns in small samples, while deep learning models excel at detecting implicit weak patterns in large datasets. Biologists have described the sequence patterns of promoters via transcription factor binding sites (TFBSs). However, the flanking sequences of cis-regulatory elements, have long been overlooked and often arbitrarily decided in promoter design. To address this limitation, we introduce DeepSEED, an AI-aided framework that efficiently designs synthetic promoters by combining expert knowledge with deep learning techniques. DeepSEED has demonstrated success in improving the properties of Escherichia coli constitutive, IPTG-inducible, and mammalian cell doxycycline (Dox)-inducible promoters. Furthermore, our results show that DeepSEED captures the implicit features in flanking sequences, such as k-mer frequencies and DNA shape features, which are crucial for determining promoter properties.

Validation of a Computerized Cognitive Training Tool to Assess Cognitive Impairment and Enable Differentiation Between Mild Cognitive Impairment and Dementia.

BACKGROUND: Age-related cognitive decline is a chronic, progressive process that requires active clinical management as cognitive status changes. Computerized cognitive training (CCT) provides cognitive exercises targeting specific cognitive domains delivered by computer or tablet. Meanwhile, CCT can be used to regularly monitor the cognitive status of patients, but it is not clear whether CCT can reliably assess cognitive ability or be used to diagnose different stages of cognitive impairment. OBJECTIVE: To investigate whether CCT can accurately monitor the cognitive status of patients with cognitive impairment as well as distinguish patients with dementia from patients with mild cognitive impairment (MCI). METHOD: We included 116 patients (42 dementia and 74 MCI) in final analysis. Cognitive ability was assessed by averaging the patient performance on the CCT to determine the Cognitive Index. The validity of the Cognitive Index was evaluated by its correlation with neuropsychological tests, and internal consistency was measured to assess the reliability. Additionally, we determined the diagnostic ability of the Cognitive Index to detect dementia using receiver operating characteristic (ROC) analysis. RESULTS: The Cognitive Index was highly correlated with the Montreal Cognitive Assessment (r = 0.812) and the Mini-Mental State Examination (r = 0.694), indicating good convergent validity, and the Cronbach's alpha coefficient was 0.936, indicating excellent internal consistency. The area under the ROC curve, sensitivity, and specificity of the Cognitive Index to diagnose dementia were 0.943, 83.3%, and 91.9%, respectively. CONCLUSIONS: CCT can be used to assess cognitive status and detect dementia in patients with cognitive impairment.

An efficient electrolyte additive of 1,3,6-hexanetricarbonitrile for high performance aqueous zinc-ion batteries.

The growth of Zn dendrites and parasitic side reactions between electrode and electrolyte are major obstacles to the development of rechargeable aqueous zinc-ion batteries. To address these critical issues, the use of nitrile organic compounds as electrolyte additives holds great promise. Herein, for the first time, we prepared a small volume concentration (x) of 1,3,6-Hexanetricarbonitrile (HTCN-x) as additives into zinc trifluoromethanesulphonate (Zn(OTF)2) electrolyte and studied their electrochemical properties in Zn||ZnxV2O5·nH2O (Zn||ZVO) cells. It was found that the strong interaction between H2O and HTCN could significantly reduce the population of solvated H2O outside the solvation sheath, leading to reduced side reactions in the aqueous Zn(OTF)2 electrolyte. Moreover, the HTCN additive also facilitates the formation of strong and stable solid electrolyte interphase (SEI) film on the surface of the Zn anode, which effectively prevents the growth of Zn dendrites and the anode corrosion caused by the electrolyte. As a result, the HTCN-x (x = 0.3) electrolyte enabled the symmetrical Zn||Zn cell to cycle over 950 h at a current of 1 mA cm-2 with a limited capacity of 1 mAh cm-2. When the HTCN-0.3 electrolyte was used in Zn||ZVO cell, the cell delivered a high initial capacity of 355.6 mAh g-1 at 0.1 A g-1 and maintained a high capacity of 330.0 mAh g-1 at 1 A g-1 after 465 cycles.

Constructing two-level nonlinear mixed-effects crown width models for Moso bamboo in China.

Bamboo crown width (CW) is a reliable index for evaluating growth, yield, health and vitality of bamboo, and light capture ability and carbon fixation efficiency of bamboo forests. Based on statistical results produced from fitting the eight basic growth functions using data from 1374 Phyllostachys pubescens in Yixing, Jiangsu Province, China, this study identified the most suitable function (logistic function) to construct a two-level mixed effects (NLME) CW model with the forest block and sample plot-level effects included as random effects in the model. Four methods for selecting sample bamboos per sample plot (largest bamboo, medium-sized bamboo, smallest bamboo, and randomly selected bamboos) and eight sample sizes (1-8 selected bamboos per sample plot) were evaluated to calibrate our NLME CW model. Using diameter at breast height (DBH), height to crown base (HCB), arithmetic mean diameter at breast height (MDBH), and height (H) as predictor variables, the model produced the best fit statistics (Max R2, min RMSE, and TRE). This model was further improved by introducing random effects at two levels. The results showed a positive correlation of CW with HCB and DBH and a negative correlation with H. The smallest two bamboo poles per sample plot used to estimate the random effects of the NLME model provided a satisfactory compromise regarding measurement cost, model efficiency, and prediction accuracy. The presented NLME CW model may guide effective management and carbon estimation of bamboo forests.

Solventless Amination of Lignin and Natural Phenolics using 2-Oxazolidinone.

Reactive amine compounds are critical for a vast array of useful chemicals in society, yet a limited number of them are derived from renewable resources. This study developed an efficient route to obtain aminated building blocks from phenolic resources derived from nature, such as lignin and tannic acid, for enhancing their utility in applications such as epoxy resins, nylons, polyurethanes, and other polymeric materials. The reaction utilized a carbon storage compound, 2-oxazolidinone as a solvent and as a reagent circumventing the need of hazardous chemistry of conventional amination routes such as those involving formaldehyde. Both free acids and hindered phenolics were readily converted into aminoethyl derivatives resulting in aromatics with primary amine functionality. The aminated compounds, with the potential for enhanced reactivity, can pave the way toward more advanced renewable building blocks.

Functional Lignin Building Blocks: Reactive Vinyl Esters with Acrylic Acid.

Introducing vinyl groups onto the backbone of technical lignin provides an opportunity to create highly reactive renewable polymers suitable for radical polymerization. In this work, the chemical modification of softwood kraft lignin was pursued with etherification, followed by direct esterification with acrylic acid (AA). In the first step, phenolic hydroxyl and carboxylic acid groups were derivatized into aliphatic hydroxyl groups using ethylene carbonate and an alkaline catalyst. The lignin was subsequently fractionated using a downward precipitation method to recover lignin of defined molar mass and solubility. After recovery, the resulting material was then esterified with AA, resulting in lignin with vinyl functional groups. The first step resulted in approximately 90% of phenolic hydroxyl groups being converted into aliphatic hydroxyls, while the downward fractionation resulted in three samples of lignin with defined molar masses. For the esterification reaction, the weight ratio of reagents, reaction temperature, and reaction time were evaluated as factors that would influence the modification efficacy. 13C NMR spectroscopy analysis of lignin samples before and after esterification showed that the optimized reaction conditions could reach approximately 40% substitution of aliphatic hydroxyl groups. Both steps only used lignin and the modifying reagent (no solvent), with the possibility of recovery and reuse of the reagent by dilution and distillation. An additional second esterification step of the resulting lignin sample with acetic acid or propionic acid converted 90% of remaining hydroxyl groups into short-chain carbon aliphatic esters, making a hydrophobic material suitable for further copolymerization with synthetic hydrophobic monomers.

Analysis of Structure and Antioxidant Activity of Polysaccharides from Aralia continentalis.

We extracted, purified, and characterized three neutral and three acidic polysaccharides from the roots, stems, and leaves of Aralia continentalis Kitigawa. The results of the analysis of monosaccharide composition indicated that the polysaccharides from the roots and stems were more similar to each other than they were to the polysaccharides from the leaves. The in vitro antioxidant results demonstrated that the acidic polysaccharides had stronger antioxidant activity than the neutral fractions. Therefore, we investigated the primary purified acidic polysaccharide fractions (WACP(R)-A-c, WACP(S)-A-c, and WACP(L)-A-d) by NMR and enzymatic analysis. The structural analytical results indicated that WACP(R)-A-c contained homogalacturonan (HG); WACP(S)-A-c contained HG and rhamnogalacturonan II (RG-II), and WACP(L)-A-d contained HG, RG-II, and rhamnogalacturonan I (RG-I) domains. Our findings offer insights into the screening of natural polysaccharide-based antioxidants and provide a theoretical basis for the application of A. continentalis.

An Ultrasensitive PCR-Based CRISPR-Cas13a Method for the Detection of Helicobacter pylori.

The rapid and simple detection of Helicobacter pylori (H. pylori) is essential for its clinical eradication. Although various methods for detecting H. pylori have been well established, such as endoscopy in combination with histology or culture, rapid urease test (RUT) and molecular tests using clinical specimens, it is of great importance to develop an ultrasensitive and accurate nucleic acid detection platform and apply it to identify H. pylori. To meet these demands, a novel method based on PCR and CRISPR-Cas13a, called PCR-Cas13a, was developed and validated using the DNA of 84 clinical strains and 71 clinical specimens. PCR primers for the pre-amplification of conservative sequence and CRISPR RNA (crRNA) for the detection of specific sequence were designed according to the principle. The designed primers and crRNA were specific to H. pylori, and the assay showed a high degree of specificity compared with other common pathogens. Our detection system can screen H. pylori with a limit of 2.2 copies/µL within 30 mins after PCR amplification. Using a coincidence analysis with traditional methods, our method exhibited 100% accuracy for the detection of H. pylori. Furthermore, its diagnostic performance was compared, in parallel with a q-PCR. The PCR-Cas13a demonstrates 98% sensitivity and 100% specificity. Moreover, our approach had a lower limit of detection (LOD) than q-PCR. Herein, we present a diagnostic system for the highly sensitive screening of H. pylori and distinguish it from other pathogens. All the results demonstrated that this PCR-based CRISPR assay has wide application prospects for the detection of H. pylori and other slow-growth pathogens.

Mutation spectrum of chinese amyotrophic lateral sclerosis patients with frontotemporal dementia.

BACKGROUND: Studies have reported that a noncoding hexanucleotide repeat in C9ORF72, is the most common genetic cause of amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) among Caucasian population, nevertheless it is rare in Chinese population. Therefore, we aimed to investigate the mutation spectrum of Chinese ALS patients with FTD (ALS-FTD). METHODS: ALS patients with and without cognitive impairments were enrolled. Clinical features were collected including age, sex, disease duration, ALSFRS-r, family history and cognitive evaluation. Thirty-six ALS genes were screened by whole exome sequencing (WES) and repeat-primed polymerase chain reaction (PCR) were used for detection of and abnormal repeat expansions of C9ORF72. RESULTS: A total of 1208 patients, including 66 familial ALS (FALS) and 1142 sporadic ALS (SALS) patients were included. Twenty-three patients with sporadic ALS and one familial ALS index had concomitant FTD, which accounts for 1.99% (24/1208) of patients with ALS. In sporadic ALS-FTD, one case harboring C9ORF72 expansion variant, two cases harboring ANXA11 variants and one individual carrying CCNF variant were identified. A recurrent UBQLN2 variant was detected in a familial ALS-FTD patient. All of the ALS-FTD patients carrying variants in known causative genes manifested motor symptom onset (two bulbar onset and three limb onset) and developed cognitive impairment thereafter. It is not easy to draw a conclusion of the genotype-phenotype association in ALS-FTD with certain variants, limited by the small number of patients. CONCLUSION: Our findings provide an overview of spectrum of genetic variants in Chinese ALS-FTD patients. Variants of uncertain significance in UBQLN2, ANXA11 and CCNF were identified and further studies are required for causal relations of these variants with ALS-FTD.

Hollow Fiber Membrane for Organic Solvent Nanofiltration: A Mini Review.

Organic solvents take up 80% of the total chemicals used in pharmaceutical and related industries, while their reuse rate is less than 50%. Traditional solvent treatment methods such as distillation and evaporation have many disadvantages such as high cost, environmental unfriendliness, and difficulty in recovering heat-sensitive, high-value molecules. Organic solvent nanofiltration (OSN) has been a prevalent research topic for the separation and purification of organic solvent systems since the beginning of this century with the benefits of no-phase change, high operational flexibility, low cost, as well as environmental friendliness. Especially, hollow fiber (HF) OSN membranes have gained a lot of attention due to their high packing density and easy scale-up as compared with flat-sheet OSN membranes. This paper critically reviewed the recent research progress in the preparation of HF OSN membranes with high performance, including different materials, preparation methods, and modification treatments. This paper also predicts the future direction of HF OSN membrane development.

Hard Carbons as Anodes in Sodium-Ion Batteries: Sodium Storage Mechanism and Optimization Strategies.

Sodium-ion batteries (SIBs) are regarded as promising alternatives to lithium-ion batteries (LIBs) in the field of energy, especially in large-scale energy storage systems. Tremendous effort has been put into the electrode research of SIBs, and hard carbon (HC) stands out among the anode materials due to its advantages in cost, resource, industrial processes, and safety. However, different from the application of graphite in LIBs, HC, as a disordered carbon material, leaves more to be completely comprehended about its sodium storage mechanism, and there is still plenty of room for improvement in its capacity, rate performance and cycling performance. This paper reviews the research reports on HC materials in recent years, especially the research process of the sodium storage mechanism and the modification and optimization of HC materials. Finally, the review summarizes the sterling achievements and the challenges on the basis of recent progress, as well as the prospects on the development of HC anode materials in SIBs.

Anticorrosive epoxy coatings from direct epoxidation of bioethanol fractionated lignin.

The development of lignin-based anticorrosive epoxy coatings for steel protection is beneficial for both alleviating the fossil resource depletion and value-added utilization of lignin but remains a challenge due to the inherent heterogeneous structure of lignin. Here, we selectively extract the low molecular weight (MW) fraction of a crop residue-derived enzymatic hydrolysis lignin (EHL) through a bioethanol fractionation process and prepare epoxy resin by direct epoxidation of the bioethanol fractionated lignin (BFL). The coatings are then fabricated using 20-100 wt% of BFL-based epoxy resin (LEp) as the commercial epoxy resin substitute. The low MW and high p-hydroxyphenyl content of the BFL offer high solubility and good workability for BFL and LEp during epoxidation and coating production, respectively. Lignin-based coatings with 20-40 wt% LEp exhibit good adhesion property (5B) and superior corrosion resistance, compared to the commercial epoxy coating. Although coating with high LEp concentrations (i.e., 60-100 wt%) resulted in decreased adhesion strength, the coating with 100 wt% LEp still displayed corrosion protection performance comparable to that of the commercial epoxy coating. Overall, this study provides a simple and effective approach to converting lignin to epoxy resins for a wide variety of surface coating applications.

Climatic and biotic factors influencing regional declines and recovery of tropical forest biomass from the 2015/16 El Niño.

The 2015/16 El Niño brought severe drought and record-breaking temperatures in the tropics. Here, using satellite-based L-band microwave vegetation optical depth, we mapped changes of above-ground biomass (AGB) during the drought and in subsequent years up to 2019. Over more than 60% of drought-affected intact forests, AGB reduced during the drought, except in the wettest part of the central Amazon, where it declined 1 y later. By the end of 2019, only 40% of AGB reduced intact forests had fully recovered to the predrought level. Using random-forest models, we found that the magnitude of AGB losses during the drought was mainly associated with regionally distinct patterns of soil water deficits and soil clay content. For the AGB recovery, we found strong influences of AGB losses during the drought and of [Formula: see text]. [Formula: see text] is a parameter related to canopy structure and is defined as the ratio of two relative height (RH) metrics of Geoscience Laser Altimeter System (GLAS) waveform data-RH25 (25% energy return height) and RH100 (100% energy return height; i.e., top canopy height). A high [Formula: see text] may reflect forests with a tall understory, thick and closed canopy, and/or without degradation. Such forests with a high [Formula: see text] ([Formula: see text] ≥ 0.3) appear to have a stronger capacity to recover than low-[Formula: see text] ones. Our results highlight the importance of forest structure when predicting the consequences of future drought stress in the tropics.

Discovery of lignin-transforming bacteria and enzymes in thermophilic environments using stable isotope probing.

Characterizing microorganisms and enzymes involved in lignin biodegradation in thermal ecosystems can identify thermostable biocatalysts. We integrated stable isotope probing (SIP), genome-resolved metagenomics, and enzyme characterization to investigate the degradation of high-molecular weight, 13C-ring-labeled synthetic lignin by microbial communities from moderately thermophilic hot spring sediment (52 °C) and a woody "hog fuel" pile (53 and 62 °C zones). 13C-Lignin degradation was monitored using IR-GCMS of 13CO2, and isotopic enrichment of DNA was measured with UHLPC-MS/MS. Assembly of 42 metagenomic libraries (72 Gb) yielded 344 contig bins, from which 125 draft genomes were produced. Fourteen genomes were significantly enriched with 13C from lignin, including genomes of Actinomycetes (Thermoleophilaceae, Solirubrobacteraceae, Rubrobacter sp.), Firmicutes (Kyrpidia sp., Alicyclobacillus sp.) and Gammaproteobacteria (Steroidobacteraceae). We employed multiple approaches to screen genomes for genes encoding putative ligninases and pathways for aromatic compound degradation. Our analysis identified several novel laccase-like multi-copper oxidase (LMCO) genes in 13C-enriched genomes. One of these LMCOs was heterologously expressed and shown to oxidize lignin model compounds and minimally transformed lignin. This study elucidated bacterial lignin depolymerization and mineralization in thermal ecosystems, establishing new possibilities for the efficient valorization of lignin at elevated temperature.