Zein nanospheres assisting inorganic and organic drug combination to overcome stent implantation-induced thrombosis and infection.

The complication of stent implantation is the biggest obstacle to the success of its clinical application. In this study, we developed a combination way of 3D printing and the coating technique for preparation of functional polyurethane stents against stent implantation-induced thrombosis and postoperative infection. SEM, XPS, static water contact angle, and XRD demonstrated that the functional polyurethane stent had a 37 µm-thickness membrane composed of zein nanospheres (250-350 nm). Meanwhile, ZnO nanoparticles were encapsulated in zein nanospheres while heparin was adsorbed on the surface, causing 97.1 ± 6.4 % release of heparin in 120 min (first-order kinetic model) and 62.7 ± 5.6 % release of Zn2+ in 9 days (Korsmeyer-Peppas model). The mechanical analysis revealed that the functional polyurethane stents had about 8.61 MPa and 2.5 MPa tensile strength and bending strength, respectively. The in vitro biological analysis showed that the functional polyurethane stents had good EA.hy926 cells compatibility (97.9 ± 3.8 %), anti-coagulation response (comparable plasma protein, platelet adhesion and suppressed clotting) and sustained antibacterial activities by comparison with the bare polyurethane stent. The preliminary evaluation by rabbit ex vivo carotid artery intervention experiment demonstrated that the functional polyurethane stents could maintain blood circulation under the continuous stresses of blood flow. Meanwhile, the detailed data from the simulated implant infection experiment in vivo showed the functional polyurethane stents could effectively reduce microbial infection by 3-6 times lower and improve fibrosis and macrophage infiltration.

Oral Administration of the Antimicrobial Peptide Mastoparan X Alleviates Enterohemorrhagic Escherichia coli-Induced Intestinal Inflammation and Regulates the Gut Microbiota.

The gut microbiota plays an important role in intestinal immune system development and in driving inflammation. Antibiotic administration for therapeutic purposes causes an imbalance in the gut microbiota. Antimicrobial peptides can regulate the gut microbiota and maintain intestinal homeostasis. The aim of this study was to investigate the anti-inflammatory effects and regulation of the gut microbiota by the orally administered antimicrobial peptide mastoparan X (MPX). In this study, Escherichia coli was used to induce intestinal inflammation, and the results showed that MPX+ E. coli alleviated weight loss and intestinal pathological changes in necropsy specimens of E. coli-infected mice. MPX+ E. coli reduced the serum levels of the inflammation-related proteins interleukin-2, interleukin-6, tumour necrosis factor-α, myeloperoxidase, and lactate dehydrogenase on days 7 and 28. Furthermore, MPX+ E. coli increased the length of villi and reduced the infiltration of inflammatory cells into the jejunum and colon post infection. Scanning electron microscopy and transmission electron microscopy results showed that MPX could improve the morphology of jejunum villi and microvilli and increase tight junction protein levels. 16S rRNA sequencing analysis of caecal content samples showed that the species diversity and richness were lower in the E. coli-infected group. At the genus level, MPX+ E. coli significantly reduced the abundance of Bacteroidales and Alistipes and enhanced the relative abundance of Muribaculaceae. Alpha-diversity analyses (Shannon index) showed that MPX significantly increased the microbial diversity of mice. Overall, this study is the first to investigate the effects of oral administration of MPX on intestinal inflammation and the gut microbiota, providing a new perspective regarding the prevention of enteritis and maintenance of intestinal homeostasis.

Facile Fabrication of Superhydrophobic Copper- Foam and Electrospinning Polystyrene Fiber for Combinational Oil⁻Water Separation.

Membrane-based metal substrates with special surface wettability have been applied widely for oil/water separation. In this work, a series of copper foams with superhydrophobicity and superoleophilicity were chemically etched using 10 mg mL-1 FeCl3/HCl solution with consequent ultrasonication, followed by the subsequent modification of four sulfhydryl compounds. A water contact angle of 158° and a sliding angle lower than 5° were achieved for the copper foam modified using 10 mM n-octadecanethiol solution in ethanol. In addition, the interaction mechanism was initially investigated, indicating the coordination between copper atoms with vacant orbital and sulfur atoms with lone pair electrons. In addition, the polymeric fibers were electrospun through the dissolution of polystyrene in a good solvent of chlorobenzene, and a nonsolvent of dimethyl sulfoxide. Oil absorption and collection over the water surface were carried out by the miniature boat made out of copper foam, a string bag of as-spun PS fibers with high oil absorption capacity, or the porous boat embedded with the as-spun fibers, respectively. The findings might provide a simple and practical combinational method for the solution of oil spill.