Ultrafast Axial Freezing in a Liquid-Filled Capillary Tube.

Liquid-filled capillary tubes are a kind of standard component in life science (e.g., blood vessels, interstitial pores, and plant vessels) and engineering (e.g., MEMS microchannel resonators, heat pipe wicks, and water-saturated soils). Under sufficiently low temperatures, the liquid in a capillary tube undergoes phase transition, forming an ice nucleus randomly on its inner wall. However, how an ice layer forms from the nucleus and then expands, either axially or radially to the tube inner wall, remains obscure. We demonstrated, both experimentally and theoretically, that axial freezing along the inner wall of a water-filled capillary tube occurs way ahead of radial freezing, at a nearly constant velocity 3 orders in magnitude faster than the latter. Rapid release of latent heat during axial freezing was identified as the determining factor for the short duration of recalescence, resulting in an exponential rise of the supercooling temperature from ice nucleation via axial freezing to radial freezing. The profile of the ice-water interface is strongly dependent upon the length-to-radius ratio of the capillary tube and the supercooling degree at ice nucleation. The results obtained in this study bridge the knowledge gap between the classical nucleation theory and the Stefan solution of phase transition.

Nanoscaled Titanium Oxide Layer Provokes Quick Osseointegration on 3D-Printed Dental Implants: A Domino Effect Induced by Hydrophilic Surface.

Three-dimensional printing is a revolutionary strategy to fabricate dental implants. Especially, 3D-printed dental implants modified with nanoscaled titanium oxide layer (H-SLM) have impressively shown quick osseointegration, but the accurate mechanism remains elusive. Herein, we unmask a domino effect that the hydrophilic surface of the H-SLM facilitates blood wetting, enhances the blood shear rate, promotes blood clotting, and changes clot features for quick osseointegration. Combining computational fluid dynamic simulation and biological verification, we find a blood shear rate during blood wetting of the hydrophilic H-SLM 1.2-fold higher than that of the raw 3D-printed implant, which activates blood clot formation. Blood clots formed on the hydrophilic H-SLM demonstrate anti-inflammatory and pro-osteogenesis effects, leading to a 1.5-fold higher bone-to-implant contact and a 1.8-fold higher mechanical anchorage at the early stage of osseointegration. This mechanism deepens current knowledge between osseointegration speed and implant surface characteristics, which is instructive in surface nanoscaled modification of multiple 3D-printed intrabony implants.

Effective mechanical properties of frozen hydrogel with ice inclusions.

Hydrogel exhibits attractive mechanical properties that can be regulated to be extremely tough, strong and resilient, adhesive and fatigue-resistant, thus enabling diverse applications ranging from tissue engineering scaffolds, flexible devices, to soft machines. As a liquid-filled porous material composed of polymer networks and water, the hydrogel freezes at subzero temperatures into a new material composed of polymer matrix and ice inclusions: the frozen hydrogel displays dramatically altered mechanical properties, which can significantly affect its safety and reliability in practical applications. In this study, based upon the theory of homogenization, we predicted the effective mechanical properties (e.g., Young's modulus, shear modulus, bulk modulus and Poisson ratio) of a frozen hydrogel with periodically distributed longitudinal ice inclusions. We firstly estimated its longitudinal Young's modulus, longitudinal Poisson ratio and plane strain bulk modulus using the self-consistent method, and then its longitudinal and transverse shear modulus using the generalized self-consistent method; further, the results were employed to calculate its transverse Young's modulus and transverse Poisson ratio. We validated the theoretical predictions against both finite element (FE) simulation and experimental measurement results, with good agreement achieved. We found that the estimated transverse Poisson ratio ranges from 0.3 to 0.53 and, at low volume fraction of ice inclusions, exhibits a value larger than 0.5 that exceeds the Poisson ratios of both the polymer matrix and the ice inclusion (typically 0.33-0.35). Compared with other homogenization methods (e.g., the rule of mixtures, the Halpin-Tsai equations, and the Mori-Tanaka method), the present approach is more accurate in predicting the effective mechanical properties (in particular, the transverse Poisson ratio) of frozen hydrogel. Our study provides theoretical support for the practical applications of frozen liquid-saturated porous materials such as hydrogel.

Mechanotherapy in oncology: Targeting nuclear mechanics and mechanotransduction.

Mechanotherapy is proposed as a new option for cancer treatment. Increasing evidence suggests that characteristic differences are present in the nuclear mechanics and mechanotransduction of cancer cells compared with those of normal cells. Recent advances in understanding nuclear mechanics and mechanotransduction provide not only further insights into the process of malignant transformation but also useful references for developing new therapeutic approaches. Herein, we present an overview of the alterations of nuclear mechanics and mechanotransduction in cancer cells and highlight their implications in cancer mechanotherapy.

Distinguishing poroelasticity and viscoelasticity of brain tissue with time scale.

Brain tissue is considered to be biphasic, with approximately 80% liquid and 20% solid matrix, thus exhibiting viscoelasticity due to rearrangement of the solid matrix and poroelasticity due to fluid migration within the solid matrix. However, how to distinguish poroelastic and viscoelastic effects in brain tissue remains challenging. In this study, we proposed a method of unconfined compression-isometric hold to measure the force versus time relaxation curves of porcine brain tissue samples with systematically varied sample lengths. Upon scaling the measured relaxation force and relaxation time with different length-dependent physical quantities, we successfully distinguished the poroelasticity and viscoelasticity of the brain tissue. We demonstrated that during isometric hold, viscoelastic relaxation dominated the mechanical behavior of brain tissue in the short-time regime, while poroelastic relaxation dominated in the long-time regime. Furthermore, compared with poroelastic relaxation, viscoelastic relaxation was found to play a more dominant role in the mechanical response of porcine brain tissue. We then evaluated the differences between poroelastic and viscoelastic effects for both porcine and human brain tissue. Because of the draining of pore fluid, the Young's moduli in poroelastic relaxation were lower than those in viscoelastic relaxation; brain tissue changed from incompressible during viscoelastic relaxation to compressible during poroelastic relaxation, resulting in reduced Poisson ratios. This study provides new insights into the physical mechanisms underlying the roles of viscoelasticity and poroelasticity in brain tissue. STATEMENT OF SIGNIFICANCE: Although the poroviscoelastic model had been proposed to characterize brain tissue mechanical behavior, it is difficult to distinguish the poroelastic and viscoelastic behaviors of brain tissue. The study distinguished viscoelasticity and poroelasticity of brain tissue with time scales and then evaluated the differences between poroelastic and viscoelastic effects for both porcine and human brain tissue, which helps to accurate selection of constitutive models suitable for application in certain situations (e.g., pore-dominant and viscoelastic-dominant deformation).

Critical size of kidney stone through ureter: A mechanical analysis.

Blockage of ureter caused by kidney stone, accompanied by severe pain/infections, is a high incidence urinary tract disease that has received extensive attention. Currently, in clinics, a kidney stone with diameter less than ∼5 mm is considered capable of passing through ureter. However, this critical size (∼5 mm) is empirically based, lacking quantitative analysis. In this study, we proposed a stone-ureter interaction model to quantificationally estimate the critical size of kidney stone passing through ureter. We revealed that the critical size of kidney stone is related to ureter size, about 11%-22% larger than the inner diameter of ureter. Further, based upon the Winkler elastic foundation beam model, we developed a simplified stone-ureter interaction model to evaluate how this critical size is dependent upon the stiffness of ureter and the surface roughness of kidney stone. The proposed model may help urologists improve the accuracy of personalized diagnosis and treatment.

The Efficacy and Safety of Ischemic Stroke Therapies: An Umbrella Review.

Background: Ischemic stroke is a leading cause of morbidity and mortality in neurological diseases. Numerous studies have evaluated the efficacy and safety of ischemic stroke therapies, but clinical data were largely inconsistent. Therefore, it is necessary to summarize and analyze the published clinical research data in the field. Objective: We aimed to perform an umbrella review to evaluate the efficacy and safety of ischemic stroke therapies. Methods: We conducted a search for meta-analyses and systematic reviews on PubMed, the Cochrane Library, and the Web of Science to address this issue. We examined neurological function deficit and cognitive function scores, quality of life, and activities of daily living as efficacy endpoints and the incidence of adverse events as safety profiles. Results: Forty-three eligible studies including 377 studies were included in the umbrella review. The results showed that thrombolytic therapy (tPA; alteplase, tenecteplase, and desmoteplase), mechanical thrombectomy (MTE), edaravone with tPA, stem cell-based therapies, stent retrievers, acupuncture with Western medicines, autologous bone marrow stromal cells, antiplatelet agents (aspirin, clopidogrel, and tirofiban), statins, and Western medicines with blood-activating and stasis-dispelling herbs (NaoShuanTong capsule, Ginkgo biloba, Tongqiao Huoxue Decoction, Xuesaitong injection) can improve the neurological deficits and activities of daily living, and the adverse effects were mild for the treatment of ischemic stroke. Moreover, ligustrazine, safflower yellow, statins, albumin, colchicine, MLC601, salvianolic acids, and DL-3-n-butylphthalide showed serious adverse events, intracranial hemorrhage, or mortality in ischemic stroke patients. Conclusion: Our study demonstrated that tPA, edaravone and tPA, tPA and MTE, acupuncture and Western medicines, and blood-activating and stasis-dispelling herbs with Western medicines are the optimum neurological function and activities of daily living medication for patients with ischemic stroke. Systematic Review Registration: https://inplasy.com/, identifier [INPLASY202250145].

Mechanics-driven nuclear localization of YAP can be reversed by N-cadherin ligation in mesenchymal stem cells.

Mesenchymal stem cells adopt differentiation pathways based upon cumulative effects of mechanosensing. A cell's mechanical microenvironment changes substantially over the course of development, beginning from the early stages in which cells are typically surrounded by other cells and continuing through later stages in which cells are typically surrounded by extracellular matrix. How cells erase the memory of some of these mechanical microenvironments while locking in memory of others is unknown. Here, we develop a material and culture system for modifying and measuring the degree to which cells retain cumulative effects of mechanosensing. Using this system, we discover that effects of the RGD adhesive motif of fibronectin (representative of extracellular matrix), known to impart what is often termed "mechanical memory" in mesenchymal stem cells via nuclear YAP localization, are erased by the HAVDI adhesive motif of the N-cadherin (representative of cell-cell contacts). These effects can be explained by a motor clutch model that relates cellular traction force, nuclear deformation, and resulting nuclear YAP re-localization. Results demonstrate that controlled storage and removal of proteins associated with mechanical memory in mesenchymal stem cells is possible through defined and programmable material systems.

Effect of gene mutation of plants on their mechano-sensibility: the mutant of EXO70H4 influences the buckling of Arabidopsis trichomes.

With the development of molecular biology, more and more mutants of plants have been constructed, where gene mutants have been found to influence not only the biological processes but also biophysical behaviors of plant cells. Trichomes are an important appendage, which has been found to act as an active mechanosensory switch transducing mechanical signals into physiology changes, where the mechanical property of trichomes is vital for such functions. Up to now, over 40 different genes have been found with the function of regulating trichome cell morphogenesis; however, the effect of gene mutants on trichome mechanosensory function remains elusive. In this study, we found that EXO70H4, one of the most up-regulated genes in the mature trichome, not only affects the thickness of the trichome cell wall but also the mechanical property (i.e., the Young's modulus) of trichomes. Finite element method simulation results show that the buckling instability and stress concentration (e.g., exerted by insects) cannot occur on the base of the mutant exo70H4 trichome, which might further interrupt the mechanical signal transduction from branches to the base of trichomes. These results indicated that the mutant exo70H4 trichome might lack the ability to act as an active mechanosensory switch against chewing insect herbivores. Our findings provide new information about the effect of gene mutation (like crop mutants) on the mechano-sensibility and capability to resist the agricultural pests or lodging, which could be of great significance to the development of agriculture.

Characterizing poroelasticity of biological tissues by spherical indentation: an improved theory for large relaxation.

Flow of fluids within biological tissues often meets with resistance that causes a rate- and size-dependent material behavior known as poroelasticity. Characterizing poroelasticity can provide insight into a broad range of physiological functions, and is done qualitatively in the clinic by palpation. Indentation has been widely used for characterizing poroelasticity of soft materials, where quantitative interpretation of indentation requires a model of the underlying physics, and such existing models are well established for cases of small strain and modest force relaxation. We showed here that existing models are inadequate for large relaxation, where the force on the indenter at a prescribed depth at long-time scale drops to below half of the initially peak force (i.e., F(0)/F(∞) > 2). We developed an indentation theory for such cases of large relaxation, based on Biot theory and a generalized Hertz contact model. We demonstrated that our proposed theory is suitable for biological tissues (e.g., spleen, kidney, skin and human cirrhosis liver) with both small and large relaxations. The proposed method would be a powerful tool to characterize poroelastic properties of biological materials for various applications such as pathological study and disease diagnosis.

Vibration of a liquid-filled capillary tube.

Liquid-filled capillary tubes are common structures in nature and engineering fields, which often function via vibration. Although liquid-solid interfacial tension plays important roles in the vibration behavior of the liquid-filled capillary tube, it remains elusive how the interfacial tension influences the natural frequency of capillary tube vibration. To address this, we developed a theory of beam-string structure to analyze the influence of liquid-solid interfacial tension on the vibration of a liquid-filled capillary cantilever. We used glass capillary tubes as a demo and experimentally validated the theory, where the reduced liquid-solid interfacial tension in a capillary tube decreases the natural frequencies of small-order modes. We then performed theoretical analysis and found that the change of elastocapillarity number, slenderness ratio and inner/outer radius ratio of capillary tubes enables: in higher order modes, a nonmonotonic change of natural frequency due to mode transformation between a beam and string; for lower order modes, decrease in the natural frequency to zero (increase from zero) due to mode disappearance (appearance). The developed theory would provide guidelines for high-accuracy design of capillary sensors.

Translation of a Coated Rigid Spherical Inclusion in an Elastic Matrix: Exact Solution, and Implications for Mechanobiology.

The displacement of relatively rigid beads within a relatively compliant, elastic matrix can be used to measure the mechanical properties of the matrix. For example, in mechanobiological studies, magnetic or reflective beads can be displaced with a known external force to estimate the matrix modulus. Although such beads are generally rigid compared to the matrix, the material surrounding the beads typically differs from the matrix in one or two ways. The first case, as is common in mechanobiological experimentation, is the situation in which the bead must be coated with materials such as protein ligands that enable adhesion to the matrix. These layers typically differ in stiffness relative to the matrix material. The second case, common for uncoated beads, is the situation in which the beads disrupt the structure of the hydrogel or polymer, leading to a region of enhanced or reduced stiffness in the neighborhood of the bead. To address both cases, we developed the first analytical solution of the problem of translation of a coated, rigid spherical inclusion displaced within an isotropic elastic matrix by a remotely applied force. The solution is applicable to cases of arbitrary coating stiffness and size of the coating. We conclude by discussing applications of the solution to mechanobiology.

Regulation of Cell Behavior by Hydrostatic Pressure.

Hydrostatic pressure (HP) regulates diverse cell behaviors including differentiation, migration, apoptosis, and proliferation. Abnormal HP is associated with pathologies including glaucoma and hypertensive fibrotic remodeling. In this review, recent advances in quantifying and predicting how cells respond to HP across several tissue systems are presented, including tissues of the brain, eye, vasculature and bladder, as well as articular cartilage. Finally, some promising directions on the study of cell behaviors regulated by HP are proposed.

The protective effects of acupoint gel embedding on rats with myocardial ischemia-reperfusion injury.

AIMS: Prevention and treatment of myocardial ischemia-reperfusion (I/R) injury has for many years been a hot topic in treating ischemic heart disease. As one of the most well-known methods of complementary and alternative medicine, acupuncture has attracted increasing interest in preventing myocardial I/R injury due to its remarkable effectiveness and minimal side effect. However, traditional acupuncture approaches are limited by cumbersome execution, high labor costs and inevitable pain caused by frequent stimulation. Therefore, in this work, we aimed to develop a novel acupoint gel embedding approach and investigated its role in protecting against myocardial I/R injury in rats. MAIN METHODS: Gels were embedded at bilateral Neiguan (PC6) points of rats and their protective effects against myocardial I/R injury evaluated in terms of changes in histomorphology, myocardial enzymology, antioxidant capacity, anti-inflammatory response, and anti-apoptosis of cells. KEY FINDINGS: We found that the approach of acupoint gel embedding could significantly reduce myocardial infarcted size, repair pathological changes, mitigate oxidative stress damage and inflammatory response, as well as inhibit apoptosis of cardiomyocytes. Such cardioprotective effects were found to be associated with Notch-1/Jagged-1 signaling pathway. SIGNIFICANCE: The proposed approach of acupoint gel embedding has advantages in continuous acupoint stimulation, dosing controls, and no side effects in the course of treatment, as well as in reducing the pain caused by frequent acupuncture. It can form an alternative therapy to not only protect against myocardial I/R injury but also hold great potential in treating other diseases in the future.

Energy Storage and Dissipation of Human Periodontal Ligament during Mastication Movement.

As a layer of soft fibrous tissue, the periodontal ligament (PDL) protects against mechanical shock when transmitting mastication force from tooth to its surrounding alveolar bone. Currently, no quantitative method is available to estimate the shock resistance ability of the PDL. To solve this problem, in the present study we developed a finite element (FE) model of the tooth-PDL-bone complex and analyzed the energy storage and dissipation during the mastication movements. Displacement and Mises stress of tooth-PDL-bone complex show that the PDL is able to protect the alveolar bone from mechanical shock by shielding the transfer of deformation and stress. During mastication, the energy of the PDL is stored up to ∼161.5 J/mm3 at the period of loading and dissipated about one-tenth of the stored energy when unloading. The energy storage is displacement-dependent but time-independent because of the hyperelasticity of PDL. However, the energy dissipation is time- and displacement-dependent because of the viscoelasticity of PDL. The present study helps to understand the periodontal potential and the origin of dental diseases such as tooth concussion and occlusal trauma from the view of energy conversion.

Arabidopsis Leaf Trichomes as Acoustic Antennae.

The much studied plant Arabidopsis thaliana has been reported recently to react to the sounds of caterpillars of Pieris rapae chewing on its leaves by promoting synthesis of toxins that can deter herbivory. Identifying participating receptor cells-potential "ears"-of Arabidopsis is critical to understanding and harnessing this response. Motivated in part by other recent observations that Arabidopsis trichomes (hair cells) respond to mechanical stimuli such as pressing or brushing by initiating potential signaling factors in themselves and in the neighboring skirt of cells, we analyzed the vibrational responses of Arabidopsis trichomes to test the hypothesis that trichomes can respond acoustically to vibrations associated with feeding caterpillars. We found that these trichomes have vibrational modes in the frequency range of the sounds of feeding caterpillars, encouraging further experimentation to determine whether trichomes serve as mechanical antennae.

Trichomes as a natural biophysical barrier for plants and their bioinspired applications.

Nature has inspired mankind to create novel inventions with biomimetic structures and materials, where plants provide a significant source of inspiration. Plants have evolved a range of effective appendages, among which trichomes have attracted extensive research interest due to their enormous functions. It is important to understand trichome functions and corresponding mechanisms for their bioinspired applications. In this review, we provide a comprehensive overview of the diverse functions of trichomes, with emphasis placed upon their roles as biophysical barriers that can create a complex three-dimensional (3D) network to help the plant adapt to severe environments. Moreover, we also summarize the bioinspired applications of four typical trichomes, including needle-like, hook-like, foliar-like, and antenna-like trichomes. This review offers a new perspective of interdisciplinary research on both trichome functions and their biomimetic applications.

Fountain streaming contributes to fast tip-growth through regulating the gradients of turgor pressure and concentration in pollen tubes.

Fountain streaming is a typical microfluidic pattern in plant cells, especially for cells with a high aspect ratio such as pollen tubes. Although it has been found that fountain streaming plays crucial roles in the transport of nutrients and metabolites, the positioning of organelles and the mixing of cytoplasms, its implications for the fast tip growth of pollen tubes remain a mystery. To address this, based on the observations of asiatic lily Lilium Casablanca, we developed physical models for reverse fountain streaming in pollen tubes and solved the hydrodynamics and advection-diffusion dynamics of viscous Stokes flow in the shank and apical region of pollen tubes. Theoretical and numerical results demonstrated that the gradients of turgor pressure and concentration of wall materials along the length of pollen tubes provide undamped driving force and high-efficiency materials supply, which are supposed to contribute to the fast tip-growth of pollen tubes. The sample experimental results show that the tip-growth will be abnormal when the gradients of turgor pressure change under osmotic stress induced by different concentrations of PEG-6000 (a dehydrant).

Gradient Mechanical Properties Facilitate Arabidopsis Trichome as Mechanosensor.

It has been reported that Arabidopsis thaliana leaf trichome can act as a mechanosensory switch, transducing mechanical stimuli into physiological signals, mainly through a buckling instability to focus external force (e.g., exerted by insects) on the base of trichome. The material and structural properties of trichomes remain largely unknown in this buckling instability. In this report, we mainly focused on material standpoint to explore the possible mechanism facilitating the buckling instability. We observed that the Young's modulus of trichome cell wall decreased gradually from branch to the base region of trichome. Interestingly, we also found a corresponding decline of calcium concentration on the trichome cell wall. Results of finite element method (FEM) simulation suggested that such a gradient distribution of Young's modulus significantly promotes force focusing and buckling instability on the base of trichome. It is indicated that Arabidopsis trichome has developed into an active mechanosensor benefiting from gradient cell wall mechanical properties.

Patterning Cellular Alignment through Stretching Hydrogels with Programmable Strain Gradients.

The graded mechanical properties (e.g., stiffness and stress/strain) of excellular matrix play an important role in guiding cellular alignment, as vital in tissue reconstruction with proper functions. Though various methods have been developed to engineer a graded mechanical environment to study its effect on cellular behaviors, most of them failed to distinguish stiffness effect from stress/strain effect during mechanical loading. Here, we construct a mechanical environment with programmable strain gradients by using a hydrogel of a linear elastic property. When seeding cells on such hydrogels, we demonstrate that the pattern of cellular alignment can be rather precisely tailored by substrate strains. The experiment is in consistency with a theoritical prediction when assuming that focal adhesions (FAs) would drive a cell to reorient to the directions where they are most stable. A fundamental theory has also been developed and is excellent in agreement with the complete temporal alignment of cells. This work not only provides important insights into the cellular response to the local mechanical microenvironment but can also be utilized to engineer patterned cellular alignment that can be critical in tissue remodeling and regenerative medicine applications.