Pleiotropic phenotypic effects of the TaCYP78A family on multiple yield-related traits in wheat.

Increasing crop yield depends on selecting and utilizing pleiotropic genes/alleles to improve multiple yield-related traits (YRTs) during crop breeding. However, synergistic improvement of YRTs is challenging due to the trade-offs between YRTs in breeding practices. Here, the favourable haplotypes of the TaCYP78A family are identified by analysing allelic variations in 1571 wheat accessions worldwide, demonstrating the selection and utilization of pleiotropic genes to improve yield and related traits during wheat breeding. The TaCYP78A family members, including TaCYP78A3, TaCYP78A5, TaCYP78A16, and TaCYP78A17, are organ size regulators expressed in multiple organs, and their allelic variations associated with various YRTs. However, due to the trade-offs between YRTs, knockdown or overexpression of TaCYP78A family members does not directly increase yield. Favourable haplotypes of the TaCYP78A family, namely A3/5/16/17Ap-Hap II, optimize the expression levels of TaCYP78A3/5/16/17-A across different wheat organs to overcome trade-offs and improve multiple YRTs. Different favourable haplotypes have both complementary and specific functions in improving YRTs, and their aggregation in cultivars under strong artificial selection greatly increase yield, even under various planting environments and densities. These findings provide new support and valuable genetic resources for molecular breeding of wheat and other crops in the era of Breeding 4.0.

Effects of HiPIMS Duty Cycle on Plasma Discharge and the Properties of Cu Film.

In this paper, Cu thin films were deposited on Si (100) substrates by the high-power impulse magnetron sputtering (HiIPMS) technique, and the effects of different duty cycles (from 2.25% to 5.25%) on the plasma discharge characteristics, microstructure, and electrical properties of Cu thin films were investigated. The results of the target current test show that the peak target current remains stable under 2.25% and 3% duty cycle conditions. Under the conditions of a 4.5% and 5.25% duty cycle, the target peak current shows a decreasing trend. The average power of the target shows a rising trend with the increase in the duty cycle, while the peak power of the target shows a decreasing trend with the increase in the duty cycle. The results of OES show that with the increase in the duty cycle, the total peak intensity of copper and argon emissions shows an overall increasing trend. The duty cycle from 3% to 4.5% change in copper and argon emission peak total intensity change is not obvious. The deposition rate and surface morphology of the copper film were investigated by scanning electron microscopy, and the deposition rate of the copper film increased with the increase in the duty cycle, which was mainly due to the increase in the average power. The surface roughness of the copper film was evaluated by atomic force microscopy. X-ray diffraction (XRD) was used to analyze the grain size and texture of the Cu film, and the results showed that the average grain size of the Cu film increased from 38 nm to 59 nm on the (111) and (200) crystal planes. Four-probe square resistance test copper film resistivity in 2.25%, 3% low duty cycle conditions of the copper film resistivity is generally higher than 4.5%, 5.25% high duty cycle conditions, the copper film resistivity shows the trend of change is mainly affected by the copper film grain size and the (111) face of the double effect of the optimal orientation. The lowest resistivity of the copper film measured under the 4.5% duty cycle condition is 1.7005 µΩ·cm, which is close to the intrinsic resistivity of the copper film of 1.67 µΩ·cm.

Influence of HiPIMS Pulse Widths on the Structure and Properties of Copper Films.

High-power pulse magnetron sputtering is a new type of magnetron sputtering technology that has advantages such as high peak power density and a high ionization rate compared to DC magnetron sputtering. In this paper, we report the effects of different pulse widths on the current waveform and plasma spectrum of target material sputtering, as well as the structure and properties of Cu films prepared under the same sputtering voltage and duty cycle. Extending the pulse width can make the sputtering enter the self-sputtering (SS) stage and improve the ion quantity of sputtered particles. The Cu film prepared by HiPIMS with long pulse width has higher bond strength and lower electrical resistivity compared to the Cu film prepared by short pulse width. In terms of microstructure, the Cu film prepared by HiPIMS with the long pulse width has a larger grain size and lower micro-surface roughness. When the pulse width is bigger than 200 µs, the microstructure of the Cu film changes from granular to branched. This transformation reduces the interface on the Cu film, further reducing the resistivity of the Cu film. Compared to short pulses, long pulse width HiPIMS can obtain higher quality Cu films. This result provides a new process approach for preparing high-quality Cu films using HiPIMS technology.

Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering.

Chromium Nitride (CrN) coatings have widespread utilization across numerous industrial applications, primarily attributed to their excellent properties. Among the different methods for CrN coating synthesis, direct current magnetron sputtering (DCMS) has been the dominant technique applied. Nonetheless, with the expanded applications of CrN coatings, the need for enhanced mechanical performance is concurrently escalating. High-power impulse magnetron sputtering (HiPIMS), an innovative coating deposition approach developed over the past three decades, is gaining recognition for its capability of yielding coatings with superior mechanical attributes, thereby drawing significant research interest. Considering that the mechanical performance of a coating is fundamentally governed by its microstructural properties, a comprehensive review of CrN coatings fabricated through both techniques is presented. This review of recent literature aims to embark on an insightful comparison between DCMS and HiPIMS, followed by an examination of the microstructure of CrN coatings fabricated via both techniques. Furthermore, the exploration of the underlying factors contributing to the disparities in mechanical properties observed in CrN coatings is revealed. An assessment of the advantages and potential shortcomings of HiPIMS is discussed, offering insight into CrN coating fabrication.

Ultrasonic treatment alleviated cadmium stress in sugarcane via improving antioxidant activity and physiological and biochemical status.

Cadmium (Cd) is a toxic element that endangers crop growth and affects food safety and human health. Therefore, the study of Cd mitigation technology is important. Ultrasonic treatment can improve crop growth and enhance their ability to resist various abiotic stresses. In this study, the effect of ultrasonic treatment on alleviating sugarcane Cd stress was studied in a barrel experiment using sugarcane varieties 'ROC22' and 'LC05-136' as test materials. Sugarcane buds without ultrasonic treatment and with ultrasonic treatment (20-40 kHz mixed frequency ultrasound for 2 min, dry treatment) were planted in soil with Cd contents of 0, 50, 100, 250, and 500 mg·kg-1. Compared with non-ultrasonic treatment, Ultrasonic treatment significantly increased the activities of antioxidant enzymes in sugarcane, significantly increased the content of osmoregulation substances, significantly reduced the content of superoxide anion (the highest decreases reached 11.55%) and malondialdehyde (the highest decreases reached 20.59%), and significantly increased the expression level of metallothionein (MT)-related genes, with the expression of ScMT1 increased by 8.80-37.49% and the expression of ScMT2-1-5 increased by 1.55-69.33%. In addition, ultrasonic treatment significantly reduced the Cd contents in sugarcane roots, stems, leaves, bagasse, and juice (the highest reduction in Cd content was 49.18%). In general, ultrasonic treatment regulated the metabolism of reactive oxygen species and MT-related gene expression in sugarcane, increased the Cd tolerance of sugarcane, promoted photosynthesis in sugarcane leaves, improved root morphology, enhanced sugarcane growth, and increased cane and sugar yield.

Correlation analysis of circulating tumor cells and Claudin-4 in breast cancer.

Objective: We aimed to explore the relationship between peripheral blood circulating tumor cells (CTCs) and the expression of Claudin-4 in patients with breast cancer, and further explore the potential impact on clinical prognosis and risk assessment. Methods: We classified and enumerated circulating tumor cells in the blood of breast cancer patients by CTC-enriched in situ hybridization and the detection of Claudin-4 expression by immunohistochemistry. We carried out an analysis of the correlation between the two and the comparison of their impact on clinical parameters and prognosis. Results: There were 38 patients with a low expression of Claudin-4 and 27 patients with a high expression of Claudin-4. Compared with Claudin-4 low-expression patients, the number of CTCs was higher in patients with high Claudin-4 expression (11.7 vs. 7.4, p < 0.001). High Claudin-4 expression was associated with a lower count of epithelial CTCs (E-CTCs) (3.4 vs. 5.0, p = 0.033), higher counts of mesenchymal CTCs (M-CTC) (4.4 vs. 1.1, p < 0.001), and epithelial/mesenchymal CTCs (E/M-CTCs) (4.0 vs. 3.5, p = 0.021). The intensity of Claudin-4 was positively correlated with CTC (rs = 0.43, p = 0.001). Multivariate COX regression analysis showed that CTC counts (HR = 1.3, p < 0.001), Claudin-4 (HR = 4.6, p = 0.008), and Lymphatic metastasis (HR = 12.9, p = 0.001) were independent factors for poor prognosis. COX regression of CTC classification showed that epithelial/mesenchymal CTCs (E/M-CTC) (HR = 1.9, p = 0.001) and mesenchymal CTCs (M-CTC) (HR = 1.5, p = 0.001) were independent influencing factors of adverse reactions in breast cancer patients. Conclusion: The number of CTC in breast cancer is positively correlated with the expression of Claudin-4. High CTC counts and a high proportion of M-CTCs correlated with Claudin-4 expression. CTC counts and Claudin-4 expression were independent predictors of poor prognosis in breast cancer patients.

Polystyrene microplastics enhance the microcystin-LR-induced gonadal damage and reproductive endocrine disruption in zebrafish.

The coexistence of eutrophication and plastic pollution in the aquatic environment is becoming a realistic water pollution problem worldwide. To investigate the microcystin-LR (MC-LR) bioavailability and the underlying reproductive interferences in the presence of polystyrene microplastic (PSMPs), zebrafish (Danio rerio) were exposed to individual MC-LR (0, 1, 5, and 25 µg/L) and combined MC-LR + PSMPs (100 µg/L) for 60 d. Our results showed that the existence of PSMPs increased the accumulation of MC-LR in zebrafish gonads compared to the MC-LR-only group. In the MC-LR-only exposure group, seminiferous epithelium deterioration and widened intercellular spaces were observed in the testis, and basal membrane disintegration and zona pellucida invagination were noticed in the ovary. Moreover, the existence of PSMPs exacerbated these injuries. The results of sex hormone levels showed that PSMPs enhanced MC-LR-induced reproductive toxicity, which is tightly related to the abnormal increase of 17ß-estradiol (E2) and testosterone (T) levels. The changes of gnrh2, gnrh3, cyp19a1b, cyp11a, and lhr mRNA levels in the HPG axis further proved that MC-LR combined with PSMPs aggravated reproductive dysfunction. Our results revealed that PSMPs could increase the MC-LR bioaccumulation by serving as a carrier and exaggerate the MC-LR-induced gonadal damage and reproductive endocrine disruption in zebrafish.

Sub-chronic ammonia exposure induces hepatopancreatic damage, oxidative stress, and immune dysfunction in red swamp crayfish (Procambarus clarkii).

Ammonia, as one of the primary water pollutants in aquaculture, has been shown to induce a wide range of ecotoxicological effects on aquatic animals. In order to investigate the antioxidant and innate immune responses in crustaceans disrupted by ammonia, red swamp crayfish (Procambarus clarkii) were exposed to 0, 15, 30, and 50 mg/L total ammonia nitrogen for 30 d, the alterations of antioxidant responses as well as innate immunity were studied. The results showed that the severity of hepatopancreatic injury were aggravated by the increasing ammonia levels, which were mainly characterized by tubule lumen dilatation and vacuolization. The swollen mitochondria and disappeared mitochondria ridges suggested that oxidative stress induced by ammonia targets the mitochondria. Concurrently, enhanced MDA levels, and decreased GSH levels as well as the decreased transcription and activity of antioxidant enzymes, including SOD, CAT, and GPx were noticed, which suggested that high concentrations of ammonia exposure induce oxidative stress in P. clarkii. Furthermore, a significant decrease of the hemolymph ACP, AKP, and PO along with the significant downregulation of immune-related genes (ppo, hsp70, hsp90, alf1, ctl) jointly indicated that ammonia stress inhibited the innate immune function. Our findings demonstrated that sub-chronic ammonia stress induced hepatopancreatic injury and exert suppressive effects on the antioxidant capacity as well as innate immunity of P. clarkii. Our results provide a fundamental basis for the deleterious effects of ammonia stress on aquatic crustaceans.

Molten salt synthesis of NiCo-NiCo2O4@C nanotubes as anode materials for Li-ion batteries.

The construction of carbon-encapsulated transition metal nanotube structures is a preferred method that can effectively slow down volume expansion, improve cycling stability and enhance the electrical conductivity of the reactive sites of lithium-ion batteries. In this study, nanotubes of carbon-coated NiCo-NiCo2O4 nanoparticles (NC-NCO@C) were prepared by a one-step molten salt method at high temperature using Ni and Co as catalytic centers and sodium acetate as carbon source. We used NC-NCO@C-2 nanotubes as anode materials for lithium-ion batteries(LIBs), which exhibited excellent lithium storage performance and good stability, with a specific capacity of 616.26 mAh g-1 after 1000 cycles at a high current density of 1 A g-1. In addition, NC-NCO@C-2 were used as anodes in lithium-ion full cells and LiFePO4 (LFP) was used as the cathode. The NC-NCO@C-2//LFP full-cell exhibits high capacity and good cycling stability, with a capacity of 100.7 mAh g-1 after 100 cycles and a capacity retention rate of 92%. The construction of NC, NCO, and carbon ternary complexes was found to activate and promote the reversible conversion of certain inorganic components at the solid electrolyte interfaces (SEI), which effectively reduced the volume change during cycling, increased the electrical conductivity, and improved the cycling stability of the electrode. The proposed one-step molten salt synthesis of Carbon-coated metals complexes with excellent compatibility characteristics, is expected to solve the problem of volume change in transition metals, which is encountered in LIBs applications.

Experiment on Compressive Properties and Microscopic Analysis of Sea Sand Geopolymer-Based Recycled Concrete.

For marine and coastal engineering, construction resources have become scarce due to a limited local supply. Sea sand geopolymer-based recycled concrete (SSGRC) is an innovative cementitious material known for its eco-friendly benefits and corrosion resistance. This study explores the mechanical properties of SSGRC. The influences of the replacement rate of mineral slag, alkali activator concentrations, fine aggregate types, and curing ages on the compression strength of SSGRC were studied. The failure mechanism was analyzed using the failure patterns and compressive stress-strain curves. The results show that sea sand had a positive effect on geopolymer-based material. The SSGRC reached peak strength with an alkali activator concentration of 10 mol/L and a mineral slag replacement rate of 60%. The maximum stress and strain increased with an increasing curing age. The ratios of strength to the peak value were 55% and 85% after 1 day and 7 days, respectively. Using SEM, in the last hydration stage, the C-(A)-S-H gel was formed with a dense microstructure, and the geopolymer exhibited a favorable bonding performance. The constitutive models describing the complete stress-strain relationship under compression were developed.

Two alternative splicing variants of a wheat gene TaNAK1, TaNAK1.1 and TaNAK1.2, differentially regulate flowering time and plant architecture leading to differences in seed yield of transgenic Arabidopsis.

In wheat production, appropriate flowering time and ideal plant architecture are the prerequisites for high grain yield. Alternative splicing (AS) is a vital process that regulates gene expression at the post-transcriptional level, and AS events in wheat have been found to be closely related to grain-related traits and abiotic stress tolerance. However, AS events and their biological roles in regulating flowering time and plant architecture in wheat remain unclear. In this study, we report that TaNAK1 undergoes AS, producing three splicing variants. Molecular characterization of TaNAK1 and its splicing variants demonstrated that all three protein isoforms have a conserved NB-ARC domain and a protein kinase domain, but the positions of these two domains and the length of the protein kinase domains are different among them, implying that they may have different three-dimensional structures and therefore have different functions. Further investigations showed that the two splicing variants of TaNAK1, TaNAK1.1 and TaNAK1.2, exhibited different expression patterns during wheat growth and development, while the other one, TaNAK1.3, was not detected. Subcellular localization demonstrated that TaNAK1.1 was mainly localized in the cytoplasm, while TaNAK1.2 was localized in the nucleus and cytoplasm. Both TaNAK1.1 and TaNAK1.2 exhibit protein kinase activity in vitro. Ectopic expression of TaNAK1.1 and TaNAK1.2 in Arabidopsis demonstrated that these two splicing variants play opposite roles in regulating flowering time and plant architecture, resulting in different seed yields. TaNAK1.2 positive regulates the transition from vegetative to reproductive growth, plant height, branching number, seed size, and seed yield of Arabidopsis, while TaNAK1.1 negatively regulates these traits. Our findings provide new gene resource for regulating flowering time and plant architecture in crop breeding for high grain yield.

Distinct vulnerability to oxidative stress determines the ammonia sensitivity of crayfish (Procambarus clarkii) at different developmental stages.

Red swamp crayfish (Procambarus clarkii) has increasingly become a high-value freshwater product in China. During the intensive cultivation, excessive ammonia exposure is an important lethal factor of crayfish. We investigated the toxic effects and mechanisms of ammonia on crayfish at two different developmental stages. A preliminary ammonia stress test showed a 96-h LC50 of 135.10 mg/L and 299.61 mg/L for Stage_1 crayfish (8.47 ± 1.68 g) and Stage_2 crayfish (18.33 ± 2.41 g), respectively. During a prolonged ammonia exposure (up to 96 h), serum acid phosphatase and alkaline phosphatase showed a time-dependent decrease. Histological assessment indicated the degree of hepatopancreatic injury, which was mainly characterized as tubule lumen dilatation, degenerated tubule, vacuolization and dissolved hepatic epithelial cell, increased with exposure time. Enhanced malondialdehyde level and reduced antioxidant capacity of hepatopancreas were also observed. The mRNA expression and activity of catalase and superoxide dismutase showed an initial up-regulation within 24 h, and then gradually down-regulated with the exposure time. In the post-treatment recovery period, the Stage_2 crayfish exerted a stronger antioxidant and detoxification capacity than that of the Stage_1 crayfish, and thus quickly recovered from the ammonia exposure. Our findings provide a further understanding of the adverse effects of ammonia stress and suggest guidelines for water quality management during crayfish farming.

Ionic-Liquid-Assisted Synthesis of FeSe-MnSe Heterointerfaces with Abundant Se Vacancies Embedded in N,B Co-Doped Hollow Carbon Microspheres for Accelerating the Sulfur Reduction Reaction.

Currently, extensive research efforts are being devoted to suppressing the shuttle effect of polysulfides. The uncontrollable deposition of insulating Li2 S onto the surface of sulfur host materials dramatically inhibits the continuous reduction of polysulfides in lithium-sulfur (Li-S) batteries. Herein, N,B co-doped hollow carbon microspheres embedded with dense FeSe-MnSe heterostructures and abundant Se vacancies (FeSe-MnSe/NBC) are rationally designed and synthesized via a facile hydrothermal reaction using ionic liquids as dopants. The introduction of abundant heterostructures subtly guides Li2 S nucleation and deposition in 3D frameworks, thus avoiding the formation of the Li2 S passivation layer and allowing for continuous Li+ diffusion and subsequent nucleation of Li2 S. Owing to these beneficial features, Li-S batteries comprising an FeSe-MnSe/NBC electrode exhibit significantly improved performance, including a high initial capacity of 1334 mAh g-1 at 0.2 C and ultralong cycle stability with a low capacity fading rate of 0.029% cycle-1 over 1000 cycles at 1.0 C. Remarkably, the FeSe-MnSe/NBC pouch cell delivers a considerable areal capacity of 3.6 mAh cm-2 at 0.1 C. This study provides valuable insight into heterostructures and Se vacancies for developing practical Li-S batteries.

Efficacy and Safety of a Pegasparaginase-Based Chemotherapy Regimen vs an L-asparaginase-Based Chemotherapy Regimen for Newly Diagnosed Advanced Extranodal Natural Killer/T-Cell Lymphoma: A Randomized Clinical Trial.

Importance: The L-asparaginase-based SMILE (dexamethasone, methotrexate, ifosfamide, L-asparaginase, and etoposide) chemotherapy regimen has shown higher response rates and survival benefit over an anthracycline-containing regimen. However, the safety profile was not satisfied. A well-tolerated regimen with promising efficacy is lacking. Objective: To compare the efficacy and safety of the DDGP (dexamethasone, cisplatin, gemcitabine, and pegaspargase) regimen with the SMILE regimen in newly diagnosed advanced-stage (III/IV) extranodal natural killer/T-cell lymphoma (ENKL). Design, Setting, and Participants: This was an open-label, multicenter, randomized clinical trial that took place across 12 participating hospitals in China from January 2011 to February 2019. Patients were eligible if they were 14 to 70 years old with newly diagnosed ENKL in stages III/IV and had an Eastern Cooperative Oncology Group performance status of 0 to 2. Eligible patients were evenly randomized to either the DDGP or SMILE group. Interventions: Patients in each group were treated with the assigned regimen every 21 days for 6 cycles. Main Outcomes and Measures: The primary end point was progression-free survival (PFS), and secondary end points included overall response rate and overall survival (OS). The adverse events between the DDGP and SMILE groups were compared. Results: Among the 87 randomized patients, 80 received treatment (40 in the DDGP group and 40 in the SMILE group); the median (IQR) age was 43 (12) years, and 51 (64%) were male. The baseline characteristics were similar between the groups. At a median follow-up of 41.5 months, the median PFS was not reached in the DDGP group vs 6.8 months in the SMILE group (HR, 0.42; 95% CI, 0.23-0.77; P = .004), and the median OS was not reached in the DDGP group vs 75.2 months in the SMILE group (HR, 0.41; 95% CI, 0.19-0.89, P = .02). The PFS rate at 3 years and OS rate at 5 years were higher in the DDGP group vs the SMILE group (3-year PFS, 56.6% vs 41.8%; 5-year OS, 74.3% vs 51.7%). The overall response rate was higher in the DDGP group than in the SMILE group (90.0% vs 60.0%; P = .002). Grade 3 and 4 hematologic toxic effects were more frequently reported in the SMILE group vs the DDGP group (leukopenia, 85.0% vs 62.5%; neutropenia, 85.0% vs 65.0%). Conclusions and Relevance: In this randomized clinical trial, the DDGP regimen showed promising preliminary results for patients with newly diagnosed local advanced ENKL. A confirmation trial based on larger population is warranted. Trial Registration: ClinicalTrials.gov Identifier: NCT01501149.

RNA Demethylase ALKBH5 Prevents Lung Cancer Progression by Regulating EMT and Stemness via Regulating p53.

Background: Although N6-methyladenosine (m6A) RNA methylation is the most abundant reversible methylation of mRNA, which plays a critical role in regulating cancer processing, few studies have examined the role of m6A in nonsmall-cell lung cancer-derived cancer stem-like cells (CSCs). Methods: CSCs were enriched by culturing NSCLC cells in a serum-free medium, and stem factors, including CD24, CD44, ALDH1, Nanog, Oct4, and Sox2 were detected by Western blot. ALKBH5 expression was measured by employing a tissue array. Global m6A methylation was measured after ALKBH5 knockdown. Malignances of CSCs were detected by performing CCK-8 assay, invasion assay, cell cycle analysis, and tumor formation in vitro and in vivo. Results: m6A demethylase ALKBH5 is highly expressed in CSCs derived from NSCLC. Knockdown of ALKBH5 increased global m6A level, and also increased E-cadherin, decreased stem hallmarkers, Nanog and Oct4, and inhibited stemness of CSCs. In lung carcinoma, ALKBH5 is found to be positively correlated with p53 by using Gene Expression Profiling Interactive Analysis (GEPIA) online tool. P53 transcriptionally regulates ALKBH5 and subsequently regulates the global m6A methylation level. Knockdown of p53 or inhibition of p53's transcriptional activity by addition of its specific inhibitor PFT-α decreased expression of ALKBH5 and CSCs' malignancies, including proliferation, invasion, and tumor formation ability, indicating that p53 may partially regulate CSC's malignancies via ALKBH5. Furthermore, we also found p53 transcriptionally regulates PRRX1, which is consistent with our previous report. Conclusion: Collectively, our findings indicate the pivotal role of ALKBH5 in CSCs derived from NSCLC and highlight the regulatory function of the p53/ALKBH5 axis in modulating CSC progression, which could be a promising therapeutic target for NSCLC.

TaKLU Plays as a Time Regulator of Leaf Growth via Auxin Signaling.

The growth of leaves is subject to strict time regulation. Several genes influencing leaf growth have been identified, but little is known about how genes regulate the orderly initiation and growth of leaves. Here, we demonstrate that TaKLU/TaCYP78A5 contributes to a time regulation mechanism in leaves from initiation to expansion. TaKLU encodes the cytochrome P450 CYP78A5, and its homolog AtKLU has been described whose deletion is detrimental to organ growth. Our results show that TaKLU overexpression increases leaf size and biomass by altering the time of leaf initiation and expansion. TaKLU-overexpressing plants have larger leaves with more cells. Further dynamic observations indicate that enlarged wheat leaves have experienced a longer expansion time. Different from AtKLU inactivation increases leaf number and initiation rates, TaKLU overexpression only smooths the fluctuations of leaf initiation rates by adjusting the initiation time of local leaves, without affecting the overall leaf number and initiation rates. In addition, complementary analyses suggest TaKLU is functionally conserved with AtKLU in controlling the leaf initiation and size and may involve auxin accumulation. Our results provide a new insight into the time regulation mechanisms of leaf growth in wheat.

Descriptors for some compounds with pharmacological activity; calculation of properties.

Abraham model solute descriptors have been determined for nisoldipine, nizatidine, loratadine, zonisamide, oxaprozin, rebamipide, domperidone, temozolomide, 'florfenicol', florfenicol A, dapsone, chrysin, benorilate, ß-lapachone, and Ipriflavone based on published partition coefficients, molar solubilities and gas chromatographic retention indices. The calculated solute descriptors, combined with our previously published Abraham model correlations, are used to predict several important physicochemical and biological properties, such as air-water, air-blood, air-lung, air-fat, air-skin, water-lipid, water-membrane and water-skin partition coefficients, as well as permeation from water through skin.

Modified expression of TaCYP78A5 enhances grain weight with yield potential by accumulating auxin in wheat (Triticum aestivum L.).

Increasing grain yield has always been the primary goal of crop breeding. KLUH/CYP78A5 has been shown to affect seed size in several plant species, but the relevant molecular mechanism is still unclear and there are no reports of this gene contributing to yield. Here, we demonstrate that modified expression of TaCYP78A5 can enhance wheat grain weight and grain yield per plant by accumulating auxin. TaCYP78A5 is highly expressed in maternal tissues, including ovary and seed coat during wheat development. The constitutive overexpression of TaCYP78A5 leads to significantly increased seed size and weight but not grain yield per plant due to the strengthening of apical dominance. However, localized overexpression of TaCYP78A5 in maternal integument enhances grain weight and grain yield per plant by 4.3%-18.8% and 9.6%-14.7%, respectively, in field trials. Transcriptome and hormone metabolome analyses reveal that TaCYP78A5 participates in auxin synthesis pathway and promotes auxin accumulation and cell wall remodelling in ovary. Phenotype investigation and cytological observation show that localized overexpression of TaCYP78A5 in ovary results in delayed flowering and prolonged proliferation of maternal integument cells, which promote grain enlargement. Moreover, naturally occurring variations in the promoter of TaCYP78A5-2A contribute to thousand-grain weight (TGW) and grain yield per plant of wheat;TaCYP78A5-2A haplotype Ap-HapII with higher activity is favourable for improving grain weight and grain yield per plant and has been positively selected in wheat breeding. Then, a functional marker of TaCYP78A5 haplotype Ap-HapII is developed for marker-assisted selection in wheat grain and yield improvement.

Simultaneously enhancing redox kinetics and inhibiting the polysulfide shuttle effect using MOF-derived CoSe hollow sphere structures for advanced Li-S batteries.

Lithium-sulfur (Li-S) batteries generally suffer from a serious "shuttle effect" during the charging/discharging process, resulting in the loss of active components and sluggish redox reaction kinetics that hinder the cycle life and rate performance of the battery. To address this, CoSe/C hollow structures (CoSe/C HSs) were prepared via a simple hydrothermal strategy and used as a sulfur host for Li-S batteries. The battery with CoSe/C HSs exhibited a high initial specific discharge capacity of 1405 mA h g-1 with a coulombic efficiency of 99.8% at 0.1C. Additionally, S@CoSe/C HS cathodes with a high sulfur loading of 5.1 mg cm-2 delivered a considerable specific discharge capacity of 1256.1 mA h g-1 and maintained a high capacity of 1120 mA h g-1 after 100 cycles with a capacity decay rate of 0.11% per cycle at 0.1C. The unique raspberry-like structure of CoSe/C HSs prevents polysulfides from escaping the cathode host via both physical containment and the formation of Co-S and Se-Li chemical bonds, and it also enhances the polysulfide redox kinetics. Furthermore, the peculiar raspberry-like structure can withstand volume changes during charging/discharging to better protect the cathode.

Effects of oxygen vacancy defect on microwave pyrolysis of biomass to produce high-quality syngas and bio-oil: Microwave absorption and in-situ catalytic.

This paper proposed to use ferric oxide (Fe2O3) and ferroferric oxide (Fe3O4) as catalysts with both microwave absorption and catalytic properties. Carbon dioxide (CO2) was introduced as the reaction atmosphere to further improve the quality of biofuel produced by microwave pyrolysis of food waste (FW). The results showed the bio-gas yield and the syngas concentration (H2 + CO) increased to 70.34 wt% and 61.50 mol%, respectively, using Fe3O4 as the catalyst. The content of aliphatic hydrocarbons in bio-oil produced with the catalyst Fe2O3 increased to 67.48% and the heating value reached 30.45 MJ/kg. Compared with Fe2O3 catalyst, Fe3O4 exhibited better microwave absorption properties and catalytic properties. Transmission electron microscopy (TEM) and Electron paramagnetic resonance (EPR) characterizations confirmed that the crystal surface of Fe3O4 formed more oxygen vacancy defects and unpaired electrons. Additionally, according to the X-ray photoelectron spectroscopy (XPS) analysis, the content of lattice oxygen in Fe3O4 was 14.11%, a value that was much lower than Fe2O3 (38.54%). The oxygen vacancy defects not only improved the efficient utilization of microwave energy but also provided the reactive sites for the reaction between the volatile organic compounds (VOCs) and CO2 to generate CO. This paper provides a new perspective for selecting catalysts that have both microwave absorption and catalytic properties during the microwave pyrolysis of biomass.