RESUMO
The increasing utilization of zinc oxide nanoparticles (ZnO-NPs) in many consumer products is of concern due to their eventual release into the natural environment and induction of potentially adverse impacts. The behaviour and environmental impacts of ZnO-NPs could be altered through their interactions with environmentally coexisting substances. This study investigated the changes in the behaviour of ZnO-NPs in the presence of coexisting organic pollutants (such as perfluorooctanoic acid [PFOA]), natural organic substances (i.e., humic acid [HA]), and electrolytes (i.e., NaCl and CaCl2) in simulated waters. The size, shape, purity, crystallinity, and surface charge of the ZnO-NPs in simulated water after different interaction intervals (such as 1 day, 1 week, 2 weeks, and 3 weeks) at a controlled pH of 7 were examined using various characterization techniques. The results indicated alterations in the size (such as 162.4 nm, 1 day interaction to >10 µm, 3 weeks interaction) and zeta potential (such as -47.2 mV, 1 day interaction to -0.2 mV, 3 weeks interaction) of the ZnO-NPs alone and when PFOA, electrolytes, and HA were present in the suspension. Different influences on the size and surface charge of the nanoparticles were observed for fixed concentrations (5 mM) of the different electrolytes. The presence of HA-dispersed ZnO-NPs affected the zeta potential. Such dispersal effects were also observed in the presence of both PFOA and salts due to their large aliphatic carbon content and complex structure. Cation bridging effects, hydrophobic interactions, hydrogen bonding, electrostatic interactions, and van der Waals forces could be potential interaction forces responsible for the adsorption of PFOA. The presence of organic pollutants (PFOA) and natural organic substances (HA) can transform the surface characteristics and fate of ZnO-NPs in natural and sea waters.
RESUMO
Atractylodis Rhizoma, a traditional Chinese medicine with an extensive history of treating gastrointestinal disorders and other diseases, undergoes various processing methods in China to enhance its therapeutic efficacy for specific conditions. However, a comprehensive report detailing the changes in chemical composition and pharmacological effects due to these processing methods is currently lacking. This article provides a systematic review of the commonly employed processing techniques for Atractylodis Rhizoma, including raw Atractylodis Rhizoma (SCZ), bran-fried Atractylodis Rhizoma (FCZ), deep-fried Atractylodis Rhizoma (JCZ), and rice water-processed Atractylodis Rhizoma (MCZ). It examines the alterations in chemical constituents and pharmacological activities resulting from these processes and elucidates the mechanisms of action of the primary components in the various processed forms of Atractylodis Rhizoma in the treatment of gastrointestinal diseases.
Assuntos
Atractylodes , Medicamentos de Ervas Chinesas , Rizoma , Atractylodes/química , Rizoma/química , Medicamentos de Ervas Chinesas/química , Medicamentos de Ervas Chinesas/farmacologia , Humanos , Gastroenteropatias/tratamento farmacológico , Animais , Medicina Tradicional ChinesaRESUMO
Recycling fly ash (FA) and furnace bottom ash (FBA) help with reducing greenhouse gas emissions, conserving natural resources, and minimizing waste accumulation. However, research on recycling FBA is progressing more slowly compared to FA. This research aims to investigate the combined use of FBA as a replacement for both fine aggregate and cement and its influence on the performance of mortar. The findings indicated that incorporating 25% FBA as a fine aggregate replacement and 10% or 20% ground FBA (GFBA) as a cement replacement significantly enhanced compressive strength after 28 and 56 days. Flexural strength was comparable to control mortar at 28 days and superior at 56 days. However, increasing the FBA content beyond 25% as a fine aggregate replacement reduced workability and increased porosity, which negatively affected mechanical performance and water absorption. Microstructural analyses revealed denser and more compact structures in the mortar with combined FBA replacement for both fine aggregate and cement, specifically 25% as a fine aggregate replacement and 10% and 20% as cement replacements. Optimal performance was noted in mixtures with Ca/Si and Ca/Al ratios within the ranges of 1.8-1.5 and 0.24-0.19, respectively. Trace element leaching analysis has not shown significant differences between GFBA, FA, and OPC. Regarding environmental impact assessment, using FBA as a fine aggregate replacement did not show a significant reduction in CO2 emissions, but replacing cement with FBA reduced emissions remarkably. Generally, using FBA as a replacement for both fine aggregate and cement in mortar enhances compressive and flexural strengths at optimal levels, promotes sustainability by reducing landfill waste and CO2 emissions, and supports cleaner production practices despite some workability challenges.
RESUMO
BACKGROUND: Acute lung injury (ALI) has received considerable attention in the field of critical care as it can lead to high mortality rates. Polygala tenuifolia, a traditional Chinese medicine with strong expectorant properties, can be used to treat pneumonia. Owing to the complexity of its composition, the main active ingredient is not yet known. Thus, there is a need to identify its constituent compounds and mechanism of action in the treatment of ALI using advanced technological means. PURPOSE: We investigated the anti-inflammatory mechanism and constituent compounds with regard to the effect of P. tenuifolia Willd. extract (EPT) in lipopolysaccharide (LPS)-induced ALI in vivo and in vitro. METHODS: The UHPLC-Q-Exactive Orbitrap MS technology was used to investigate the chemical profile of EPT. Network pharmacology was used to predict the targets and pathways of action of EPT in ALI, and molecular docking was used to validate the binding of polygalacic acid to Toll-like receptor (TLR) 4. The main compounds were determined using LC-MS. A rat model of LPS-induced ALI was established, and THP-1 cells were stimulated with LPS and adenosine triphosphate (ATP) to construct an in vitro model. Pathological changes were observed using hematoxylin and eosin staining, Wright-Giemsa staining, and immunohistochemistry. The expression of inflammatory factors (NE, MPO, Ly-6 G, TNF-α, IL-1ß, IL-6, and iNOS) was determined using enzyme-linked immunosorbent assay, real-time fluorescence quantitative polymerase chain reaction, and western blotting. The LPS + ATP-induced inflammation model in THP-1 cells was used to verify the in vivo experimental results. RESULTS: Ninety-nine compounds were identified or tentatively deduced from EPT. Using network pharmacology, we found that TLR4/NF-κB may be a relevant pathway for the prevention and treatment of ALI by EPT. Polygalacic acid in EPT may be a potential active ingredient. EPT could alleviate LPS-induced histopathological lung damage and reduce the wet/dry lung weight ratio in the rat model of ALI. Moreover, EPT decreased the white blood cell and neutrophil counts in the bronchoalveolar lavage fluid and decreased the expression of genes and proteins of relevant inflammatory factors (NE, MPO, Ly-6 G, TNF-α, IL-1ß, IL-6, and iNOS) in lung tissues. It also increased the expression of endothelial-type nitric oxide synthase expression. Western blotting confirmed that EPT may affect TLR4/NF-κB and NLRP3 signaling pathways in vivo. Similar results were obtained in THP-1 cells. CONCLUSION: EPT reduced the release of inflammatory factors by affecting TLR4/NF-κB and NLRP3 signaling pathways, thereby attenuating the inflammatory response of ALI. Polygalacic acid is the likely compounds responsible for these effects.
Assuntos
Lesão Pulmonar Aguda , Inflamassomos , Lipopolissacarídeos , NF-kappa B , Proteína 3 que Contém Domínio de Pirina da Família NLR , Extratos Vegetais , Polygala , Ratos Sprague-Dawley , Receptor 4 Toll-Like , Animais , Lesão Pulmonar Aguda/tratamento farmacológico , Lesão Pulmonar Aguda/induzido quimicamente , Polygala/química , Receptor 4 Toll-Like/metabolismo , Proteína 3 que Contém Domínio de Pirina da Família NLR/metabolismo , NF-kappa B/metabolismo , Masculino , Inflamassomos/metabolismo , Ratos , Extratos Vegetais/farmacologia , Extratos Vegetais/química , Simulação de Acoplamento Molecular , Humanos , Transdução de Sinais/efeitos dos fármacos , Anti-Inflamatórios/farmacologia , Medicamentos de Ervas Chinesas/farmacologia , Medicamentos de Ervas Chinesas/química , Pulmão/efeitos dos fármacos , Pulmão/patologiaRESUMO
In recent years, shape memory polymers (SMPs) and self-healing polymers (SHPs) have been research hotspots in the field of smart polymers owing to their unique stimulus response mechanisms. Previous research on SHPs has primarily focused on contact repair. However, in instances where substantial cracks occur during practical use, autonomous closure becomes challenging, impeding effective repair. By integration of the shape memory effect (SME) with SHPs, physical wound closure can be achieved via the SME, facilitating subsequent chemical/physical repair processes and enhancing self-healing effectiveness. This article reviews key findings from previous research on shape memory-assisted self-healing (SMASH) materials and addresses the challenges and opportunities for future investigation.
RESUMO
Existing stress evaluation methods based on the Lamb waves mainly use the time of flight (TOF) or velocity as the means of stress measurement. However, these two features used for stress measurement are sometimes insensitive to stress changes. Therefore, it is essential to explore other features that are potentially more sensitive to stress changes. The time-frequency spectrums of signals containing stress information have not yet been fully studied for stress evaluation. This paper proposes a uniaxial stress measurement method based on two time-frequency characteristics of Lamb waves, i.e., the slope of time-frequency spectrum distribution (TFSD) and pulse width impact factor. Theoretical expressions of the slope of TFSD are derived. The impacts of excitation signal parameters (i.e., bandwidth and center frequency) and noise on two time-frequency characteristics were discussed. Then, the fitting results of the finite element simulation are consistent with the results predicted by theory. To experimentally validate the proposed theory, aluminum plate specimens with two different types of adhesives were used for the experiment. According to the experimental stress measurement expression, three uniaxial tensile tests in the range of 35-95 MPa were conducted on the identical batch of specimens. The maximum standard deviation of multiple measured stress based on pulse width impact factor is 3.76433 MPa, demonstrating excellent measurement stability. The maximum standard deviation of multiple measured stress based on the slope of TFSD is 9.12492 MPa. It shows that the proposed methodology is a promising alternative for stress measurement.
RESUMO
Early and sensitive detection of tobacco mosaic virus (TMV) is of great significance for improving crop yield and protecting germplasm resources. Herein, we constructed a novel fluorescence sensor to detect TMV RNA (tRNA) through double strand specific nuclease (DSN) cycle and activator regenerative electron transfer atom transfer radical polymerization (ARGET ATRP) dual signal amplification strategy. The hairpin DNA complementarily paired with tRNA was used as a recognition unit to specifically capture tRNA. By the double-stranded DNA hydrolyzed with DSN, tRNA is released to open more hairpin DNA, and more complementary DNA (cDNA) is bound to the surface of the magnetic beads (MBs) to achieve the first amplification. After binding with the initiator, the cDNA employed ARGET ATRP to attach more fluorescent signal molecules to the surface of MBs, thus achieving the second signal amplification. Under the optimal experimental conditions, the logarithm of fluorescence intensity versus tRNA concentration showed a good linear relationship in the range of 0.01-100 pM, with a detection limit of 1.03 fM. The limit of detection (LOD) was calculated according to LOD = 3 N/S. Besides, the sensor showed good reproducibility and stability, which present provided new method for early and highly sensitive detection for plant viruses.
Assuntos
RNA Viral , Vírus do Mosaico do Tabaco , Vírus do Mosaico do Tabaco/genética , Vírus do Mosaico do Tabaco/química , RNA Viral/análise , Fluorescência , Limite de Detecção , Técnicas Biossensoriais/métodos , Corantes Fluorescentes/química , Espectrometria de FluorescênciaRESUMO
Human epidermal growth factor receptor 2 (HER2), a common proto-oncogene, is overexpressed in a subset of breast cancer patients. It is essential to track HER2 expression for early breast cancer diagnosis. Herein, a ratiometric electrochemical biosensor for detection of HER2 based on activators generated by electron transfer for atom transfer radical polymerisation (AGET ATRP) and hairpin DNA was developed. Specifically, hairpin DNA was first self-assembled on the gold electrode by Au-S bond. Upon capturing HER2, the stem-loop structure of hairpin DNA was unfolded, the signal value of methylene blue (MB) decreased as it moved away from the electrode surface. cDNA was linked with HER2 by complementary base pairing to introduce amino group. Then, the initiator 2-bromo-2-methylpropionic acid (BMP) were connected to the amino group on the cDNA to activate ARGET ATRP. The detection performance of biosensors for HER2 was explored by the ratio signal between two signal molecules. Under optimal conditions, this ratiometric electrochemical biosensor shows good selectivity and stability with a wide detection range of 1-1 × 106 pM and a detection limit of 78.47 fM. Furthermore, the biosensor exhibits satisfactory anti-interference ability due to the hairpin DNA and dual signal system, and has promising application prospects in the detection of other DNA disease markers.
Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas , Proto-Oncogene Mas , Receptor ErbB-2 , Técnicas Biossensoriais/métodos , Receptor ErbB-2/genética , Humanos , Técnicas Eletroquímicas/métodos , Eletrodos , Ouro/química , Limite de Detecção , Polimerização , DNA/química , DNA/genéticaRESUMO
BACKGROUND: Appropriate conditions for storage of Artemisia argyi leaves reduce irritation during treatment and increase the active ingredient content. Naturally aged A. argyi leaves (≥1 year) are optimal for moxibustion; however, this process is time-consuming and costly. A comprehensive understanding of the conditions for artificial aging of A. argyi leaves and the mechanism of quality-marker conversion are required to guarantee A. argyi quality and moxibustion efficacy. OBJECTIVE: To identify the optimal conditions for artificial aging of A. argyi leaves and clarify the mechanism of quality-marker conversion. METHOD: Gas chromatography (GC), high-performance liquid chromatography (HPLC), colorimeter (CD), and near-infrared spectroscopy (NIRS) were used to determine the chemical composition of A. argyi leaves before and after artificial and natural (1 year) aging and to determine the optimal artificial aging conditions. The effects of both artificially and naturally aged A. argyi leaves were then evaluated in a mouse model of ulcerative colitis (UC). The main chemical components of aged A. argyi leaves were then analyzed to determine quality-markers and the transformation mechanism. RESULTS: Comprehensive analysis of volatile and non-volatile components, color values, and characteristic near-infrared spectra revealed that the quality of artificially aged A. argyi leaves was similar to that of naturally aged A. argyi leaves. In the mouse model, artificially and naturally aged A. argyi leaves not only improved the symptoms of UC with the same therapeutic effects, but also safeguarded the barrier of the colonic mucosa and prevented the release of colitis-related substances. In addition, the content of caffeic acid converted from L-phenylalanine in A. argyi leaves increased during the aging process. CONCLUSION: Conditions for artificial aging of A. argyi leaves were identified for the first time, and the equivalent efficacy of artificially aged A. argyi leaves and naturally aged A. argyi leaves for improving UC was confirmed. This method for artificial aging of A. argyi leaves not only reduces the time and cost associated with this process, but also provides technical support to ensure the quality and stability of artificially aged A. argyi leaves. In addition, caffeic acid was identified as a potential quality-marker for establishing standards and specifications for aging A. argyi leaves for the first time, and its possible transformation mechanism was preliminarily elucidated.
Assuntos
Artemisia , Folhas de Planta , Artemisia/química , Folhas de Planta/química , Animais , Masculino , Camundongos , Moxibustão/métodos , Cromatografia Líquida de Alta Pressão/métodos , Modelos Animais de Doenças , Espectroscopia de Luz Próxima ao Infravermelho/métodosRESUMO
BACKGROUND: Southwest China is one of the largest karst regions in the world. Karst environment is relatively fragile and vulnerable to human activities. Due to the discharge of sewage and domestic garbage, the karst system may be polluted by pathogenic bacteria. The detection of bacterial distribution and identification of phage capable of infecting them is an important approach for environmental assessment and resource acquisition. METHODS: Bacteria and phages were isolated from karst water in southwest China using the plate scribing and double plate method, respectively. Isolated phage was defined by transmission electron microscopy, one-step growth curve and optimal multiplicity of infection (MOI). Genomic sequencing, phylogenetic analysis, comparative genomic and proteomic analysis were performed. RESULTS: A Klebsiella quasipneumoniae phage was isolated from 32 isolates and named KL01. KL01 is morphologically identified as Caudoviricetes with an optimal MOI of 0.1, an incubation period of 10 min, and a lysis period of 60 min. The genome length of KL01 is about 45 kb, the GC content is 42.5%, and it contains 59 open reading frames. The highest average nucleotide similarity between KL01 and a known Klebsiella phage 6939 was 83.04%. CONCLUSIONS: KL01 is a novel phage, belonging to the Autophagoviridae, which has strong lytic ability. This study indicates that there were not only some potential potentially pathogenic bacteria in the karst environment, but also phage resources for exploration and application.
Assuntos
Bacteriófagos , Humanos , Bacteriófagos/genética , Filogenia , Proteômica , Klebsiella/genética , Bactérias , ChinaRESUMO
The extensive use of organic amine pesticides (OAPs) in agricultural practices has resulted in the contamination of water environments, posing threats to ecosystems and human health. This study focused on the Xiang River (XR), a representative drinking water source, as the research area to investigate the occurrence characteristics of 34 OAPs. Diphenylamine emerged as the most prevalent OAP in surface water due to industrial and agricultural activities, while cycloate dominated in sediments due to cumulative effects. Generally, the concentration of OAPs in a mixed tap water sample was lower than those in surface water samples, indicating OAPs can be removed by water plants to a certain extent. The water-sediment distribution coefficients (kd) of ΣOAPs were much less than 1 L/g, the majority of OAPs maintained relatively high concentrations in water samples instead of accumulating in sediments. Furthermore, risk assessment revealed that carbofuran showed a moderate risk to the aquatic environment, with a risk quotient of 0.23, while other OAPs presented minor risks. This study provided crucial insights for regional pesticide management and control in the XR basin, emphasizing the importance of implementing strategies to minimize the release of OAPs into the environment and protect human health.
Assuntos
Água Potável , Praguicidas , Humanos , Aminas , Ecossistema , Rios , China , Medição de RiscoRESUMO
A unique combination of a specific nucleic acid restriction endonuclease (REase) and atom transfer radical polymerization (ATRP) signal amplification strategy was employed for the detection of T790M mutations prevalent in the adjuvant diagnosis of lung cancer. REase selectively recognizes and cleaves T790M mutation sites on double-stranded DNA formed by hybridization of a capture sequence and a target sequence. At the same time, the ATRP strategy resulted in the massive aggregation of upconverted nanoparticles (UCNPs), which significantly improved the sensitivity of the biosensor. In addition, the UCNPs have excellent optical properties and can eliminate the interference of autofluorescence in the samples, thus further improving the detection sensitivity. The proposed upconversion fluorescent biosensor is characterized by high specificity, high sensitivity, mild reaction conditions, fast response time, and a detection limit as low as 0.14 fM. The performance of the proposed biosensor is comparable to that of clinical PCR methods when applied to clinical samples. This work presents a new perspective for assisted diagnosis in the pre-intervention stage of tumor diagnostics in the early stage of precision oncology treatments.
Assuntos
Técnicas Biossensoriais , Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/genética , Enzimas de Restrição do DNA , Receptores ErbB/genética , Polimerização , Clivagem do DNA , Limite de Detecção , Mutação , Medicina de Precisão , Inibidores de Proteínas Quinases , Técnicas Biossensoriais/métodosRESUMO
In recent years, there has been rapid development in the field of shape memory materials with active deformation performance. However, bismaleimide, a widely used thermosetting material in aerospace, has been largely overlooked in shape memory applications. This work presents the synthesis of a molecule containing an alkene bond adjacent to an oxygen atom. Through molecular design, a one-time reaction between this specialized molecule and the bismaleimide molecule is successfully achieved, facilitated by the steric hindrance effect. Therefore, a new series of shape memory bismaleimide materials are obtained. By introducing a diamine to adjust the chain length, the properties of material are further improved, resulting in increasing static modulus by 506 times. The synthesized materials exhibit a broad glass transition temperature (Tg) range exceeding 153 °C, remarkable stiffness tunability. Notably, in the synthesis process of this materials series, the disulfide bonds are introduced, which facilitates the realization of self-healing and reprocessable functionalities in the resulting thermosetting materials. This significant advancement lays a solid foundation for the future recycling and reuse of aircraft, satellites, and other equipment, offering promising prospects for enhancing sustainability and efficiency within the aerospace industry.
RESUMO
Recently, biomass has been regarded as a promising option for solid energy in China, which is promoted in the residential sector and firing power plants. We collected 200 PM2.5 samples (particulate matter with a aerodynamic diameter smaller than 2.5 µm) at multi-sites across Beijing from three individual sampling cases from 2015 to 2017. The levels of OC, OC fractions, EC, EC fractions, as well as K+ were measured. Then, we adopted the Positive Matrix Factorization 5.0 to apportion the sources of carbonaceous aerosols. The source apportionment results were compared with the estimates of source contribution using the bottom-up technical method with the latest emission inventories after the Action Plan was put into effect in 2013. Our results demonstrate that high pollution of carbonaceous aerosols originated from wood smoking based on the receptor modeling and bottom-up technical method in Beijing from 2015 to 2017. Future energy transition policy should focus on the technologies and regulations for reducing emissions from renewable biomass fuel combustion. This study highlights the importance of regulations that address emissions controls on fuels replacing coal combustion to meet the needs to mitigate air pollution from primary energy use.
Assuntos
Poluentes Atmosféricos , Pequim , Poluentes Atmosféricos/análise , Fumaça , Madeira/química , Estações do Ano , Monitoramento Ambiental/métodos , Material Particulado/análise , China , Atmosfera , Aerossóis/análise , Políticas , Carbono/análiseRESUMO
The technical synergy between flexible sensing paper and triboelectric nanogenerator (TENG) in the next stage of artificial intelligence Internet of Things engineering makes the development of intelligent sensing paper with triboelectric function very attractive. Therefore, it is extremely urgent to explore functional papers that are more suitable for triboelectric sensing. Here, a cellulose nanocrystals (CNCs) reinforced PVDF hybrid paper (CPHP) is developed by electrospinning technology. Benefitting from the unique effects of CNCs, CPHP forms a solid cross-linked network among fibers and obtains a high-strength (25 MPa) paper-like state and high surface roughness. Meanwhile, CNCs also improve the triboelectrification effect of CPHP by assisting the PVDF matrix to form more electroactive phases (96% share) and a higher relative permittivity (17.9). The CPHP-based TENG with single electrode configuration demonstrates good output performance (open-circuit voltage of 116 V, short-circuit current of 2.2 µA and power density of 91 mW m-2 ) and ultrahigh pressure-sensitivity response (3.95 mV Pa-1 ), which endows CPHP with reliable power supply and sensing capability. More importantly, the CPHP-based flexible self-powered tactile sensor with TENG array exhibits multifunctional applications in imitation Morse code compilation, tactile track recognition, and game character control, showing great prospects in the intelligent inductive device and human-machine interaction.
RESUMO
Shape memory polymers (SMPs) and their composites (SMPCs) are smart materials that can be stably deformed and then return to their original shape under external stimulation, thus having a memory of their shape. Three-dimensional (3D) printing is an advanced technology for fabricating products using a digital software tool. Four-dimensional (4D) printing is a new generation of additive manufacturing technology that combines shape memory materials and 3D printing technology. Currently, 4D-printed SMPs and SMPCs are gaining considerable research attention and are finding use in various fields, including biomedical science. This review introduces SMPs, SMPCs, and 4D printing technologies, highlighting several special 4D-printed structures. It summarizes the recent research progress of 4D-printed SMPs and SMPCs in various fields, with particular emphasis on biomedical applications. Additionally, it presents an overview of the challenges and development prospects of 4D-printed SMPs and SMPCs and provides a preliminary discussion and useful reference for the research and application of 4D-printed SMPs and SMPCs.
RESUMO
Total oxidisable precursor (TOP) assay can oxidise some per- and polyfluoroalkyl substances (PFASs) and their precursors, most of which cannot be quantitatively detected so far, and convert them to detectable PFASs, such as perfluoroalkyl acids (PFAAs). However, the conversion is constrained by the complexity of the target samples, including co-existent organics, unknown PFAS precursors, and background. In this study, the TOP assay is modified to increase the oxidation and conversion efficiency by changing the initial concentration of target sample, increasing oxidising doses, time, temperature, etc. The modified TOP assay is applied to test several aqueous film-forming foams (AFFF) and a PFAS-contaminated soil extract. The sum concentrations of the detectable PFASs are increased by up to â¼534× in the AFFF samples and â¼7× in the PFAS-contaminated soil extract. The detectable fluorotelomer sulfonate (FTS, such as 6:2/8:2 FTS) is accounted as an oxidation indicator to monitor the oxidation and conversion progress of the oxidisable PFASs precursors to the detectable PFASs. Overall, the modified TOP assay could be an appropriate method for identifying missing PFASs mass in complex matrices by detecting the PFASs precursors effectively.
RESUMO
Traditionally, Tripterygium hypoglaucum (Levl.) Hutch (THH) are widely used in Chinese folk to treat rheumatoid arthritis (RA). This study aimed to investigate whether the anti-RA effect of THH is related with the gut microbiota. The main components of prepared THH extract were identified by HPLC-MS. C57BL/6 mice with adjuvant-induced arthritis (AIA) were treated with THH extract by gavage for one month. THH extract significantly alleviated swollen ankle, joint cavity exudation, and articular cartilage destruction in AIA mice. The mRNA and protein levels of inflammatory mediators in muscles and plasma indicated that THH extract attenuated inflammatory responses in the joint by blocking TLR4/MyD88/MAPK signaling pathways. THH extract remarkably restored the dysbiosis of the gut microbiota in AIA mice, featuring the increases of Bifidobacterium, Akkermansia, and Lactobacillus and the decreases of Butyricimonas, Parabacteroides, and Anaeroplasma. Furthermore, the altered bacteria were closely correlated with physiological indices and drove metabolic changes of the intestinal microbiota. In addition, antibiotic-induced pseudo germ-free mice were employed to verify the role of the intestinal flora. Strikingly, THH treatment failed to ameliorate the arthritis symptoms and signaling pathways in pseudo germ-free mice, which validates the indispensable role of the intestinal flora. For the first time, we demonstrated that THH extract protects joint inflammation by manipulating the intestinal flora and regulating the TLR4/MyD88/MAPK signaling pathway. Therefore, THH extract may serve as a microbial modulator to recover RA in clincial practice.ver RA in clincial practice.
Assuntos
Artrite Experimental , Microbioma Gastrointestinal , Camundongos , Animais , Tripterygium , Fator 88 de Diferenciação Mieloide/genética , Receptor 4 Toll-Like/genética , Camundongos Endogâmicos C57BL , Artrite Experimental/induzido quimicamente , Artrite Experimental/tratamento farmacológicoRESUMO
Plant-derived polysaccharides, such as Atractylodes lancea rhizome polysaccharide (ALP), are good immune regulators. However, the immune regulatory mechanism of the ALP is unknown. This study aimed to evaluate the effects of ALP on the intestinal mucosal barrier and intestinal mucosal immunity of immunosuppressed mice. We also compared the activity of raw Atractylodes lancea rhizome polysaccharide (SALP) with wheat bran processed bran-fried Atractylodes lancea rhizome polysaccharide (FALP; both at 1.2 g/kg/d for mice). Our results showed that ALP effectively increased the immune organ index and blood cell count, stimulated the secretion of cytokines, and promoted the expression of occludin and zonula occludens-1 (ZO-1). ALP also promoted the expression of T cells and the secretion of sIgA. Furthermore, ALP alleviated the gut microbiota disorder in Cy-treated mice and increased the relative abundances of Lactobacillus and Faecalibaculum. ALP reversed the decrease in the level of SCFAs and promoted the expression of G protein-coupled receptor 43 (GPR43). To our knowledge, this study was the first to explore how the ALP protects the intestinal mucosal barrier and enhances intestinal mucosal immunity by alleviating the gut microbiota imbalance and metabolic disorders of SCFAs. FALP was more therapeutic than SALP, suggesting that FALP could be developed as a promising functional food component.
RESUMO
The occurrence and removal rate of 52 typical pharmaceuticals and personal care products (PPCPs) were investigated in a wastewater treatment plant in Beijing, China. Thirty-three PPCPs were found in the influent, with caffeine (CF, 11387.0 ng L-1) being the most abundant, followed by N,N-diethyl-meta-toluamide (DEET, 9568.4 ng L-1), metoprolol (MTP, 930.2 ng L-1), and diclofenac (DF, 710.3 ng L-1). After treatment processes, the cumulative concentration of PPCPs decreased from 2.54 × 104 ng L-1 to 1.44 × 103 ng L-1, with the overall removal efficiency (RE) of 94.3%. Different treatment processes showed varying contributions in removing PPCPs. PPCPs were efficiently removed in sedimentation, anoxic, and ultraviolet units. For individual compounds, a great variation in RE (52.1-100%) was observed. Twenty-two PPCPs were removed by more than 90%. The highly detected PPCPs in the influent were almost completely removed. Aerated grit chamber removed nearly 50% of fluoroquinolone (FQs) and more than 60% of sulfonamides. Most PPCPs showed low or negative removals during anaerobic treatment, except for CF which was eliminated by 64.9%. Anoxic treatment demonstrated positive removals for most PPCPs, with the exceptions of DF, MTP, bisoprolol, carbamazepine (CBZ), and sibutramine. DEET and bezafibrate were efficiently removed during the secondary sedimentation. Denitrification biological filter and membrane filtration also showed positive effect on most PPCPs removals. The remaining compounds were oxidized by 16-100% in ozonation. DF, sulpiride, ofloxacin (OFL), trimethoprim, and phenolphthalein were not amenable to ultraviolet. After the treatment, the residue OFL, CBZ, and CF in receiving water were identified to pose high risk to aquatic organisms. Considering the complex mixtures emitted into the environment, therapeutic groups psychotropics, stimulant, and FQs were classified as high risk. These findings provide valuable insights into adopting appropriate measures for more efficient PPCPs removals, and emphasize the importance of continued monitoring specific PPCPs and mixtures thereof to safeguard the ecosystem.