Determination of the optimal pH for doxorubicin encapsulation in polymeric micelles.

HYPOTHESIS: The anticancer drug doxorubicin hydrochloride (DX) shows a high solubility in aqueous media thanks to the positive charge in the ammonium group. This feature, however, affects the drug encapsulation in the hydrophobic domains of polymeric micelles (PMs) used for the targeted delivery of the drug. At basic pH, DX deprotonates but also acquires a negative charge in the phenolic groups of the anthracycline structure. Both the efficiency and the rate of encapsulation will be increased by choosing an appropriate pH such that the drug molecule is in neutral form. EXPERIMENTS: An optimal pH for the encapsulation of the DX in PMs based on commercial poloxamers and on the diblock copolymer methoxy-poly(ethylene glycol)17-b-poly(ε-caprolactone)9 was determined by fluorescence spectroscopy, following the time evolution of both the intensity ratio of the first and the second emission bands of DX and its fluorescence lifetime, both sensitive to the environment polarity. Intracellular delivery of PMs encapsulated drug was followed by Confocal Scanning Laser Microscopy (CSLM). Cell viability was assessed with the sulforhodamine B (SRB) assay. FINDINGS: By adjusting pH to 8.1 a high yield of incorporation of DX in the PMs was achieved coupled to an appreciable increase (one order of magnitude) in the drug encapsulation rate. In-vitro tests in selected cancer cell lines showed the slow release of the drug and a delay in the cytotoxic response in comparison to free DX as detected by CSLM and SRB assay. The proposed methodology paves the way for a greener, faster and more efficient encapsulation of DX in PMs.

Intraparticle Kinetics Unveil Crowding and Enzyme Distribution Effects on the Performance of Cofactor-Dependent Heterogeneous Biocatalysts.

Multidimensional kinetic analysis of immobilized enzymes is essential to understand the enzyme functionality at the interface with solid materials. However, spatiotemporal kinetic characterization of heterogeneous biocatalysts on a microscopic level and under operando conditions has been rarely approached. As a case study, we selected self-sufficient heterogeneous biocatalysts where His-tagged cofactor-dependent enzymes (dehydrogenases, transaminases, and oxidases) are co-immobilized with their corresponding phosphorylated cofactors [nicotinamide adenine dinucleotide phosphate (NAD(P)H), pyridoxal phosphate (PLP), and flavin adenine dinucleotide (FAD)] on porous agarose microbeads coated with cationic polymers. These self-sufficient systems do not require the addition of exogenous cofactors to function, thus avoiding the extensive use of expensive cofactors. To comprehend the microscopic kinetics and thermodynamics of self-sufficient systems, we performed fluorescence recovery after photobleaching measurements, time-lapse fluorescence microscopy, and image analytics at both single-particle and intraparticle levels. These studies reveal a thermodynamic equilibrium that rules out the reversible interactions between the adsorbed phosphorylated cofactors and the polycations within the pores of the carriers, enabling the confined cofactors to access the active sites of the immobilized enzymes. Furthermore, this work unveils the relationship between the apparent Michaelis-Menten kinetic parameters and the enzyme density in the confined space, eliciting a negative effect of molecular crowding on the performance of some enzymes. Finally, we demonstrate that the intraparticle apparent enzyme kinetics are significantly affected by the enzyme spatial organization. Hence, multiscale characterization of immobilized enzymes serves as an instrumental tool to better understand the in operando functionality of enzymes within confined spaces.

Elevated p38MAPK activity promotes neural stem cell aging.

Age-progressive neural stem cell (NSC) dysfunction leads to impaired neurogenesis, cognitive decline and the onset of age-related neurodegenerative pathologies. p38MAPK signalling pathway limits stem cell activity during aging in several tissues. Its role in NSCs remains controversial. In this work, we show that p38MAPK activity increases in NSCs with age in the subventricular zone (SVZ) and its pharmacological inhibition is sufficient to rejuvenate their activity in vitro. These data reveal a cell-autonomous role for p38MAPK increase in decreasing NSC homeostasis with age. This information shed light in the role of p38MAPK in NSC aging.

Engineering multifunctional metal/protein hybrid nanomaterials as tools for therapeutic intervention and high-sensitivity detection.

Protein-based hybrid nanomaterials have recently emerged as promising platforms to fabricate tailored multifunctional biologics for biotechnological and biomedical applications. This work shows a simple, modular, and versatile strategy to design custom protein hybrid nanomaterials. This approach combines for the first time the engineering of a therapeutic protein module with the engineering of a nanomaterial-stabilizing module within the same molecule, resulting in a multifunctional hybrid nanocomposite unachievable through conventional material synthesis methodologies. As the first proof of concept, a multifunctional system was designed ad hoc for the therapeutic intervention and monitoring of myocardial fibrosis. This hybrid nanomaterial combines a designed Hsp90 inhibitory domain and a metal nanocluster stabilizing module resulting in a biologic drug labelled with a metal nanocluster. The engineered nanomaterial actively reduced myocardial fibrosis and heart hypertrophy in an animal model of cardiac remodeling. In addition to the therapeutic effect, the metal nanocluster allowed for in vitro, ex vivo, and in vivo detection and imaging of the fibrotic disease under study. This study evidences the potential of combining protein engineering and protein-directed nanomaterial engineering approaches to design custom nanomaterials as theranostic tools, opening up unexplored routes to date for the next generation of advanced nanomaterials in medicine.

Neuronal p38α mediates age-associated neural stem cell exhaustion and cognitive decline.

Neuronal activity regulates cognition and neural stem cell (NSC) function. The molecular pathways limiting neuronal activity during aging remain largely unknown. In this work, we show that p38MAPK activity increases in neurons with age. By using mice expressing p38α-lox and CamkII-Cre alleles (p38α∆-N), we demonstrate that genetic deletion of p38α in neurons suffices to reduce age-associated elevation of p38MAPK activity, neuronal loss and cognitive decline. Moreover, aged p38α∆-N mice present elevated numbers of NSCs in the hippocampus and the subventricular zone. These results reveal novel roles for neuronal p38MAPK in age-associated NSC exhaustion and cognitive decline.

A Simple Approach to Design Proteins for the Sustainable Synthesis of Metal Nanoclusters.

Metal nanoclusters (NCs) are considered ideal nanomaterials for biological applications owing to their strong photoluminescence (PL), excellent photostability, and good biocompatibility. This study presents a simple and versatile strategy to design proteins, via incorporation of a di-histidine cluster coordination site, for the sustainable synthesis and stabilization of metal NCs with different metal composition. The resulting protein-stabilized metal NCs (Prot-NCs) of gold, silver, and copper are highly photoluminescent and photostable, have a long shelf life, and are stable under physiological conditions. The biocompatibility of the clusters was demonstrated in cell cultures in which Prot-NCs showed efficient cell internalization without affecting cell viability or losing luminescence. Moreover, the approach is translatable to other proteins to obtain Prot-NCs for various biomedical applications such as cell imaging or labeling.

Expanding One-Pot Cell-Free Protein Synthesis and Immobilization for On-Demand Manufacturing of Biomaterials.

Fabrication of protein-based biomaterials is an arduous and time-consuming procedure with multiple steps. In this work, we describe a portable toolkit that integrates both cell-free protein synthesis (CFPS) and protein immobilization in one pot just by mixing DNA, solid materials, and a CFPS system. We have constructed a modular set of plasmids that fuse the N-terminus of superfolded green fluorescent protein (sGFP) with different peptide tags (poly(6X)Cys, poly(6X)His, and poly(6X)Lys), which drive the immobilization of the protein on the tailored material (agarose beads with different functionalities, gold nanorods, and silica nanoparticles). This system also enables the incorporation of azide-based amino acids into the nascent protein for its selective immobilization through copper-free click reactions. Finally, this technology has been expanded to the synthesis and immobilization of enzymes and antibody-binding proteins for the fabrication of functional biomaterials. This synthetic biological platform has emerged as a versatile tool for on-demand fabrication of therapeutic, diagnostic, and sensing biomaterials.

Increased aquaporin 1 and 5 membrane expression in the lens epithelium of cataract patients.

In this work we have analyzed the expression levels of the main aquaporins (AQPs) expressed in human lens epithelial cells (HLECs) using 112 samples from patients treated with cataract surgery and 36 samples from individuals treated with refractive surgery, with transparent lenses as controls. Aquaporin-1 (AQP1) is the main AQP, representing 64.1% of total AQPs in HLECs, with aquaporin-5 (AQP5) representing 35.9% in controls. A similar proportion of each AQP in cataract was found. Although no differences were found at the mRNA level compared to controls, a significant 1.65-fold increase (p=0.001) in AQP1protein expression was observed in HLECs from cataract patients, with the highest differences being found for nuclear cataracts (2.1-fold increase; p<0.001). A similar trend was found for AQP5 (1.47-fold increase), although the difference was not significant (p=0.161). Moreover we have shown increased membrane AQP5 protein expression in HLECs of patients with cataracts. No association of AQP1 or AQP5 expression levels with age or sex was observed in either group. Our results suggest regulation of AQP1 and AQP5 at the post-translational level and support previous observations on the implication of AQP1 and 5 in maintenance of lens transparency in animal models. Our results likely reflect a compensatory response of the crystalline lens to delay cataract formation by increasing the water removal rate.

A novel approach for measuring the intrinsic nanoscale thickness of polymer brushes by means of atomic force microscopy: application of a compressible fluid model.

The thickness of a poly(sulfo propyl methacrylate) (PSPM) brush is determined by Atomic Force Microscopy (AFM) imaging as a function of the loading force at different ionic strengths, ranging from Milli-Q water to 1 M NaCl. Imaging is performed both with a sharp tip and a colloidal probe. The brush thickness strongly depends both on the applied load and on the ionic strength. A brush thickness of 150 nm is measured in Millipore water when applying the minimal loading force. Imaging with an 8 µm silica particle as a colloidal probe results in a thickness of 30 nm larger than that measured with the tip. Increasing the ionic strength causes the well known reduction of the thickness of the brush. The apparent thickness of the brush decreases with increasing loading forces. An empirical model analogous to that of a compressible fluid is applied to describe the dependence of the apparent thickness of the brush with loading force. The model comprises three ionic strength dependent parameters for the brush: thickness at infinite compression, energy, and cohesive force. The meaning and significance of these parameters are discussed. A particular advantage of the model is that it allows for determination of the brush thickness at zero loading force.

In vivo imaging of dopaminergic neurotransmission after transient focal ischemia in rats.

The precise biologic mechanisms involved in functional recovery processes in response to stroke such as dopaminergic neurotransmission are still largely unknown. For this purpose, we performed in parallel in vivo magnetic resonance imaging and positron emission tomography (PET) with [(18)F]fluorodeoxyglucose ([(18)F]FDG) and [(11)C]raclopride at 1, 3, 7, 14, 21, and 28 days after middle cerebral artery occlusion in rats. In the ischemic territory, PET [(18)F]FDG showed a initial decrease in cerebral metabolism followed by a time-dependent recovery to quasi-normal values at day 14 after ischemia. The PET with [(11)C]raclopride, a ligand for dopamine D(2) receptor, showed a sustained binding during the first week after ischemia that declined dramatically from day 14 to day 28. Interestingly, a slight increase in [(11)C]raclopride binding was observed at days 1 to 3 followed by the uppermost binding at day 7 in the contralateral territory. Likewise, in vitro autoradiography using [(3)H]raclopride confirmed these in vivo results. Finally, the neurologic test showed major neurologic impairment at day 1 followed by a recovery of the cerebral function at day 28 after cerebral ischemia. Taken together, these results might suggest that dopamine D(2) receptor changes in the contralateral hemisphere could have a key role in functional recovery after cerebral ischemia.

Responsive polyelectrolyte multilayers assembled at high ionic strength with an unusual collapse at low ionic strength.

Responsive polyelectrolyte multilayers (PEMs) of poly(diallyl dimethyl ammonium chloride) (PDADMAC) and poly(styrene sodium sulfonate) (PSS) with thicknesses between 350 and 400 nm for 11 deposited polyelectrolyte layers were fabricated assembling the polyelectrolytes at 3 M NaCl. When the 3 M NaCl bulk solution is replaced by water, the PEMs release water, approximately a 46% of the total mass, and experience a thickness reduction of more than 200 nm. Changes in thickness and water content are fully reversible. The film recovers its original thickness and water content when it is exposed again to a 3 M NaCl solution. A responsive polymer film is achieved with the capability of swelling at high ionic strength and collapsing in water with variations in thickness of hundred of nanometers.

Templation, water content, and zeta potential of polyelectrolyte nanoassemblies: a comparison between polyelectrolyte multilayers and brushes.

This feature article deals with the self assembly and physical chemistry of polyelectrolytes: multilayers and brushes. The article highlights the interesting behavior of polyelectrolytes in nanoscale assemblies, giving more insight into the complexity of the formation of the assemblies. The water content of multilayers and brushes is studied during the assembly and in different ionic strengths. Similarities are found in the behavior of the brushes and multilayers with ionic strength, with regard to changes in the thickness and the water content. An invariance of the zeta potential with ionic strength is also observed for both systems, which can be explained as a result of conformational changes of the polymer chains. Finally, the combination of brushes and multilayers for surface modification is presented.

Holes and ledges created by multilayer assembly on polyelectrolyte brushes: a novel route for the three-dimensional nanoscale design of surfaces.

The layer-by-layer (LBL) assembly of poly(diallyldimethylammonium chloride) and poly(sodium styrene sulfonate) on poly(sulfo propyl methacrylate) brushes resulted in films with nanometer- and micrometer-sized holes and ledges, observed by atomic force microscopy and scanning electron microscopy. Polyelectrolyte assembly was followed by the quartz microbalance technique. The formation of ledges and holes is explained by the interaction of the brush polymers with the incoming polyelectrolytes during the LBL assembly, inducing a spatially localized and self-organized accumulation of the assembled polymers.

Carbon nanotube surface modification with polyelectrolyte brushes endowed with quantum dots and metal oxide nanoparticles through in situ synthesis.

Carbon nanotubes (CNTs) have been successfully coated with a covalently bonded polymer brush of negatively charged poly(3-sulfopropylamino methacrylate) (PSPM) by in situ polymerization employing atomic transfer radical polymerization (ATRP) from initiating silanes attached to the CNTs before the polymerization. The CNT-bonded brush forms a polymer layer or shell-like structure around the CNTs and provides colloidal stabilization for the CNTs in aqueous media. In situ syntheses of nanocrystalline CdS and magnetic iron oxide in the polymer brushes lead to the formation of hybrid nanocomposites consisting of nanoparticle-containing PSPM-coated CNTs that remain readily dispersible and stable in aqueous media. The hybrid nanostructures are synthesized by ion exchange with the cations of the sulfonate groups of the PSPM followed by precipitation and were followed by stepwise zeta potential measurements and TEM. Such structures could have applications in the design of more complex structures and devices. The general synthetic scheme can be extended to include other nanoparticles as brush cargo to broaden the utility or functionality of the CNTs. TEM data shows nanocrystalline CdS in the range of 5-8 nm embedded in the PSPM brush and nanocrystalline iron oxide with a size between 2 and 4 nm, with the former consistent with UV-vis spectroscopy and fluorescence measurements.

Silver nanoparticles functionalized in situ with the conjugated polymer (PEDOT:PSS).

Silver nanoparticles have been functionalized in situ with the electrically conducting polymer, poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) via colloidal synthesis. The formation of the functionalized silver nanoparticles, hereafter designated Ag(PEDOT:PSS), was confirmed by the appearance of the characteristic plasmon absorption peak at 420 nm in the UV-Vis spectrum of the aqueous suspension and by TEM analysis, where spherical particles with a mean size of around 8 nm (metallic core) were observed. Homogeneous thin films with granular topography, as observed by AFM, were prepared by self assembly. Electrical studies of the films showed an increase in electrical conductivity of three orders of magnitude with respect to the polymer film presumably due to the presence of the silver core. The conductive polymer/silver composite films also exhibit interesting electrochromic switching between blue and brown. These properties suggest the possibility of a variety of applications of Ag(PEDOT:PSS) films such as in electro optics devices, smart windows, amperometric sensors and capacitors.

Controlled stripping of polyelectrolyte multilayers by quaternary ammonium surfactants.

The quartz crystal microbalance with dissipation technique (QCM-D) and atomic force microscopy (AFM) have been employed to study the interaction of N-tetradecyl trimethyl ammonium bromide (TdTmAB) with polyelectrolyte multilayers containing poly(sodium 4-styrene sulfonate) (PSS) as the polyanion and either poly(allylamine hydrochloride) (PAH) or poly(diallyl dimethyl ammonium chloride) (PDADMAC) as the polycations. The multilayers were exposed to aqueous solutions of TdTmAB. This resulted in a selective removal of PDADMAC PSS layers while layers with PAH as polycation remained stable. It is suggested that PDADMAC/PSS multilayers can be employed as strippable protecting layers.

How the central torsion angle affects the rates of nonradiative decay in some geometrically restricted p-quaterphenyls.

A small series of p-quaterphenyl derivatives has been prepared in which the dihedral angle (phi) for the two central rings is constrained by dialkoxy spacers of varying length. The photophysical properties of these compounds remain comparable, but there is a clear correlation between the rate constants for nonradiative decay of both singlet and triplet excited states and phi in fluid solution. The rates tend toward a minimum as phi approaches 90 degrees . These effects are attributed to the general phenomenon of extended delocalization and can be traced to a combination of changes in the Huang-Rhys factor and the electron-vibrational coupling matrix element, both relating to displacement of the relevant potential energy surfaces and to the medium-frequency vibronic mode coupled to decay. The latter effect arises because of different levels of conjugation in the ground-state molecule. Such findings might have important implications for the design of improved light-emitting diodes. A similar angle dependence is noted for the yield of the pi-radical cation formed on photoionization in a polar solvent, but here, the effect is due to variations in the respective energy gaps between the relevant excited states.