Impact of Smoking on Salivary Lipid Profile and Oxidative Stress in Young Adults: A Comparative Analysis between Traditional Cigarettes, E-Cigarettes, and Heat-Not-Burn Products.

BACKGROUND Smoking nicotine is considered to be one of the most harmful addictions, leading to the development of a number of health complications, including many pathologies in the oral cavity. The aim of this study was to examine the effect of smoking traditional cigarettes, e-cigarettes, and heat-not-burn products on profiles of salivary lipids and lipid peroxidation products in the unstimulated and stimulated saliva of healthy young adults with a smoking habit of up to 3 years. MATERIAL AND METHODS We enrolled 3 groups of 25 smoking patients each and a control group matched for age, gender, and oral status. In saliva collected from patients from the study groups and participants from the control group, the concentrations of sphingolipids: sphingosine, sphinganine, sphingosine-1-phosphate, ceramides, and salivary lipid peroxidation products - malondialdehyde (MDA) and 4-hydroxynonenal (HNE) - were measured. The normality of distribution was assessed using the Shapiro-Wilk test. For comparison of the results, one-way analysis of variance (ANOVA) followed by post hoc Tukey test was used. RESULTS We demonstrated that each type of smoking causes a decrease in the concentration of salivary lipids, and there was an increased concentration of salivary MDA and 4-HNE. CONCLUSIONS Smoking in the initial period of addiction leads to an increase in the concentration of lipid peroxidation products through increased oxidative stress, leading to disturbance of the lipid balance of the oral cavity (eg, due to damage to cell membranes).

Food Selectivity in Children with Autism Spectrum Disorder: A Statistical Analysis in Southern Italy.

This paper focuses on autism spectrum disorder (ASD) and food selectivity, both of which are prevalent in the pediatric population. In this context, the authors paid attention to food selectivity and its possible correlation with the atypicality of sensory processes, outlining the useful rehabilitation treatments to draw on. This research included the parents or caregivers of pediatric patients diagnosed with autism spectrum disorder and placed within a therapeutic clinic. The sample is composed of 111 children, males and females, aged between 2 and 10 years, and includes 60 children diagnosed with autism and 51 children with normotypical development, similar in characteristics but without the disorder. The standardized questionnaire, "Brief Autism Mealtime Behavior Inventory", was developed to examine behavior during meals, especially in children with ASD. The "Brief Sensory Profile", and the "Child Oral and Motor Proficiency Scale", were also administered. The results obtained from the analysis lead to evidence of eating and food selectivity difficulty. Additionally, our study demonstrates that food selectivity can be caused by extreme sensory modulation and sensory problems related to the smell, texture, color, and temperature of food. In fact, the results obtained emphasize the correlation between food selectivity and the sensory domains of taste and smell. Furthermore, this research highlights a correlation between motor skills and eating skills, particularly regarding food selectivity, which is closely associated with atypical and disruptive behaviors during meals.

Mitochondrial Redox Balance of Fibroblasts Exposed to Ti-6Al-4V Microplates Subjected to Different Types of Anodizing.

Despite the high biocompatibility of titanium and its alloys, the need to remove titanium implants is increasingly being debated due to the potential for adverse effects associated with long-term retention. Therefore, new solutions are being sought to enhance the biocompatibility of titanium implants. One of them is to increase the thickness of the passive layer of the implant made of titanium dioxide. We were the first to evaluate the effect of hard-anodized (type II) Ti-6Al-4V alloy discs on the cytotoxicity, mitochondrial function, and redox balance of fibroblasts mitochondria compared to standard-anodized (type III) and non-anodized discs. The study used fibroblasts obtained from human gingival tissue. The test discs were applied to the bottom of 12-well plates. Cells were cultured for 24 h and 7, 14, and 21 days and mitochondria were isolated. We demonstrated the occurrence of oxidative stress in the mitochondria of fibroblasts of all tested groups, regardless of the presence and type of anodization. Type II anodization prevented changes in complex II activity (vs. control). The lowest degree of citrate synthase inhibition occurred in mitochondria exposed to titanium discs with type II anodization. In the last phase of culture, the presence of type II anodization reduced the degree of cytochrome c oxidase inhibition compared to the other tests groups and the control group, and prevented apoptosis. Throughout the experiment, the release of titanium, aluminium, and vanadium ions from titanium discs with a hard-anodized passive layer was higher than from the other titanium discs, but decreased with time. The obtained results proved the existence of dysfunction and redox imbalance in the mitochondria of fibroblasts exposed to hard-anodized titanium discs, suggesting the need to search for new materials perhaps biodegradable in tissues of the human body.

The "Dedicated" C.B.C.T. in Dentistry.

This position statement represents a consensus of an expert committee composed by the Italian Academy of General Dentistry (Accademia Italiana Odontoiatria Generale COI-AIOG) and Italian Academy of Legal and Forensic Dentistry (Accademia Italiana di Odontoiatria Legale e Forense OL-F) on the appropriate use of cone beam computed tomography (C.B.C.T.) in dentistry. This paper analyzes the use of C.B.C.T. in light of the rapid evolution of volumetric technologies, with the new low- and ultra-low-dose exposure programs. These upgrades are determining an improvement in the precision and safety of this methodology; therefore, the need of a guideline revision of the use of C.B.C.T. for treatment planning is mandatory. It appears necessary to develop a new model of use, which, in compliance with the principle of justification and as low as reasonably achievable (ALARA) and as low as diagnostically acceptable (ALADA), can allow a functional "Dedicated C.B.C.T." exam optimized for the individuality of the patient.

Long-Term Chromatic Durability of White Spot Lesions through Employment of Infiltration Resin Treatment.

Background and Objectives: White spot lesions (WSLs) denote regions of subsurface demineralization on the enamel that manifest as opaque and milky-white regions. Treatment for WSLs is essential for both clinical and aesthetic reasons. Resin infiltration has been identified as the most efficacious solution for alleviating WSLs, but studies with long-term monitoring are scarce. The aim of this clinical study is to assess the color change stability of the lesion after four years of implementing the resin infiltration technique. Materials and Methods: Forty non-cavity and unrestored white spot lesions (WSLs) were treated with the resin infiltration technique. The color of the WSLs and adjacent healthy enamel (SAE) was assessed using a spectrophotometer at T0 (baseline), T1 (after treatment), T2 (1 year after) and T3 (4 years after). The Wilcoxon test was utilized to determine the significance of the variation of color (ΔE) between WSLs and SAE over the observed time periods. Results: When comparing the color difference ΔE (WSLs-SAE) at T0-T1, the Wilcoxon test demonstarated a statistically significant difference (p < 0.05). For ΔE (WSLs-SAE) at T1-T2 and T1-T3, the color variation was not statistically significant (p = 0.305 and p = 0.337). Conclusions: The study's findings indicate that the resin infiltration technique is an effective solution for resolving the appearance of WSLs, and the results have demonstrated stability for a minimum of four years.

Characterization of the Oral Microbiome in Wearers of Fixed and Removable Implant or Non-Implant-Supported Prostheses in Healthy and Pathological Oral Conditions: A Narrative Review.

Oral commensal microorganisms perform very important functions such as contributing to the health of the host. However, the oral microbiota also plays an important role in the pathogenesis and development of various oral and systemic diseases. The oral microbiome may be characterized by a higher prevalence of some microorganisms than others in subjects with removable or fixed prostheses, depending on oral health conditions, the prosthetic materials used, and any pathological conditions brought about by inadequate prosthetic manufacturing or poor oral hygiene. Both biotic and abiotic surfaces of removable and fixed prostheses can be easily colonized by bacteria, fungi, and viruses, which can become potential pathogens. The oral hygiene of denture wearers is often inadequate, and this can promote oral dysbiosis and the switch of microorganisms from commensal to pathogens. In light of what emerged from this review, fixed and removable dental prostheses on teeth and on implants are subject to bacterial colonization and can contribute to the formation of bacterial plaque. It is of fundamental importance to carry out the daily hygiene procedures of prosthetic products, to design the prosthesis to facilitate the patient's home oral hygiene practices, and to use products against plaque accumulation or capable of reducing oral dysbiosis to improve patients' home oral practices. Therefore, this review primarily aimed to analyze the oral microbiome composition in fixed and removable implant or non-implant-supported prostheses wearers in healthy and pathological oral conditions. Secondly, this review aims to point out related periodontal self-care recommendations for oral dysbiosis prevention and periodontal health maintenance in fixed and removable implant or non-implant-supported prostheses wearers.

Biomechanics of implant-supported restorations / Biomecânica das restaurações implantossuportadas

The rehabilitation of patients with dental implant-supported restorations is an ideal treatment option in contemporary dentistry. The aim of this review was to compile and to demonstrate the mechanical response during loading condition, on the stress distributions of implant-supported prostheses. The findings show that the majority of stresses were concentrated in the cervical region of the implant/abutment interface and that they can be affected by several clinical parameters and loading conditions. Finally, the final prosthetic design should combine superior mechanical response, long-term survival rate and allow patient satisfaction. (AU)

A reabilitação de pacientes com restaurações implanto-suportadas é uma opção de tratamento ideal na odontologia contemporânea. O objetivo desta revisão foi compilar e demonstrar a resposta mecânica durante a aplicação de carga, na distribuição de tensão de próteses implanto-suportadas. Os achados mostram que a maioria das tensões se concentram na região cervical da interface implante/pilar e pode ser afetada por diversos parâmetros clínicos e condições de carregamento. Por fim, o desenho protético final deve combinar uma melhor resposta mecânica, taxa de sobrevida a longo prazo e permitir a satisfação do paciente. (AU)

Pharmacological Aspects and Biological Effects of Cannabigerol and Its Synthetic Derivatives.

Cannabigerol (CBG) is a cannabinoid from the plant Cannabis sativa that lacks psychotomimetic effects. Its precursor is the acidic form, cannabigerolic acid (CBGA), which is, in turn, a biosynthetic precursor of the compounds cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC). CBGA decarboxylation leads to the formation of neutral cannabinoid CBG, through a chemical reaction catalyzed by heat. On the basis of the growing interest in CBG and with the aim of highlighting scientific information on this phytocannabinoid, we focused the content of this article on its pharmacokinetic and pharmacodynamic characteristics and on its principal pharmacological effects. CBG is metabolized in the liver by the enzyme CYP2J2 to produce hydroxyl and di-oxygenated products. CBG is considered a partial agonist at the CB1 receptor (R) and CB2R, as well as a regulator of endocannabinoid signaling. Potential pharmacological targets for CBG include transient receptor potential (TRP) channels, cyclooxygenase (COX-1 and COX-2) enzymes, cannabinoid, 5-HT1A, and alpha-2 receptors. Pre-clinical findings show that CBG reduces intraocular pressure, possesses antioxidant, anti-inflammatory, and anti-tumoral activities, and has anti-anxiety, neuroprotective, dermatological, and appetite-stimulating effects. Several findings suggest that research on CBG deserves to be deepened, as it could be used, alone or in association, for novel therapeutic approaches for several disorders.

Attitudes towards Antibiotic Prescription and Antimicrobial Resistance Awareness among Italian Dentists: What Are the Milestones?

Antimicrobial resistance is a growing phenomenon, often associated with the improper prescription of antibiotics, prescribed by those who do not follow the guidelines for antibiotic stewardship. The aim of this study was to evaluate the current attitude towards antibiotic prescribing and antimicrobial resistance awareness among Italian dentists. An online questionnaire was distributed to Italian dentists from September to December 2021. The questionnaire was composed of three main sections. The first part was focused on demographic characteristics, the second part on prescription habits, and the third part on the dentists' knowledge regarding the phenomenon of antimicrobial resistance. A chi-square test was used to find associations between different variables. The level of significance was set at p < 0.05. A total of 382 dentists completed the questionnaire. The main reasons for antibiotic prescribing were for abscesses (39.6%), extractions (24.5%), and pulpitis (14.1%). The majority of participants (85.3%) reported prescribing macrolides in the case of a penicillin allergy. Most dentists (98.9%) were aware of the antimicrobial resistance phenomenon, but only 7.4% of them consulted the guidelines for prescribing antibiotics. This study demonstrates that the same trend exists in Italy as in other countries in terms of the high prevalence of misuse and overuse of antibiotics, and that Italian dentists utilize a range of antibiotic management strategies.

Oral Lesions Following Anti-SARS-CoV-2 Vaccination: A Systematic Review.

Increasing evidence relate anti-SARS-CoV-2 vaccinations to orofacial adverse reactions, therefore, the present systematic review aimed to evaluate primary oral lesions diagnosed in adult subjects, following the WHO Emergency Use Listing approved and EMA authorized vaccines, also in relation to cases' age, gender, comorbidities, and history of COVID-19, and in relation to vaccine type and doses. The study protocol, registered on PROSPERO (CRD42022339032) and compliant with the PRISMA statement, included an electronic search across Scopus, MEDLINE/PubMed, BioMed Central databases, and PROSPERO, ended on 18 June 2022 and succeeded by a manual search, an independent data extraction, and arisk of bias evaluation through ROBINS-I tool. Qualitatively synthesized data from the 13studies included showed an overall low prevalence (16 cases), though higher in females (68.8%), of oral lesions, mainly erosions and ulcers (34.5%). Nine cases were diagnosed following Pfizer-BioNTech, two Moderna, and one AstraZeneca, Serum Institute of India, Sinopharm, and Johnson&Johnson vaccines, respectively; specifically, eight after the first dose and seven after the second. In one case, vaccine type and dose were not specified. Considering newly developing vaccines, presented findings may be updated and further studies needed to highlight factors affecting oral lesion occurrence and specific macro-microscopic phenotypes in relation to cases' and vaccines' characteristics.

Stress Distribution Pattern in Zygomatic Implants Supporting Different Superstructure Materials.

The aim of this study was to assess and compare the stress-strain pattern of zygomatic dental implants supporting different superstructures using 3D finite element analysis (FEA). A model of a tridimensional edentulous maxilla with four dental implants was designed using the computer-aided design (CAD) software. Two standard and two zygomatic implants were positioned to support the U-shaped bar superstructure. In the computer-aided engineering (CAE) software, different materials have been simulated for the superstructure: cobalt-chrome (CoCr) alloy, titanium alloy (Ti), zirconia (Zr), carbon-fiber polymers (CF) and polyetheretherketone (PEEK). An axial load of 500 N was applied in the posterior regions near the zygomatic implants. Considering the mechanical response of the bone tissue, all superstructure materials resulted in homogeneous strain and thus could reconstruct the edentulous maxilla. However, with the aim to reduce the stress in the zygomatic implants and prosthetic screws, stiffer materials, such Zr, CoCr and Ti, appeared to be a preferable option.

Does Low-Taper Root Canal Shaping Decrease the Risk of Root Fracture? A Systematic Review.

Minimal root-canal preparation has been suggested to reduce the risk of root fracture, but as a result, satisfactory cleaning and shaping do not take place. Large-scale taper instrumentation can contribute to removing infected tissue; however, it may weaken the tooth structure. The aim of this systematic review is to evaluate whether root-canal shaping with low-taper instruments decreases the risk of root fracture, compared to high-conicity shaping. A search was performed on Ovid MEDLINE, PubMed, and the Web of Science. The inclusion criteria were: studies comparing the root fracture resistance of endodontically treated teeth, shaped with low- and high-conicity taper instruments, in human trials, and via in vitro study. The review includes all types of endodontically treated teeth, with various instrument tapers. The scientific search engines produced 328 results. Only 20 of the results were evaluated after screening. Based on the articles analyzed, it is not clear whether a taper difference can determine differences in root fracture resistance. No randomized controlled trial (RCTs) with long follow-ups have been published to date. It must also be taken into account that the in vitro studies do not consider the numerous differences that there are between in vitro and clinical evaluation. The review was registered on the PROSPERO website, with the protocol number CRD42020151451.

Root Canal Cleaning after Different Irrigation Techniques: An Ex Vivo Analysis.

Background and Objectives: The endodontic space is a complex area on both micro and macro levels; therefore, traditional irrigation techniques may not guarantee a complete cleaning of such a complicated tridimensional system. The presented ex vivo study aimed to evaluate root canal cleanliness, obtained through an equal volume of traditionally applied sodium hypochlorite (NaOCl), compared to ultrasonically activated NaOCl and ultrasonically activated NaOCl that had undergone intracanal heating NaOCl. Materials and Methods: A total of 60 freshly extracted human mandibular premolars underwent root sample length standardization (18 mm), root canal preparation and, based on the irrigation method employed, were randomly and equally assigned to three study groups, composed of root samples treated with ultrasonically activated NaOCl, ultrasonically activated NaOCl that had undergone intracanal heating and traditionally applied NaOCl. The root specimens were subsequently fixated with 4% buffered formalin solution and decalcified in Morse liquid. A total often 6-micron-thick serial cross-sections were obtained, dyed using hematoxylin and eosin and examined through an optical microscope at 40×, 100×, and 200×. Results: Ultrasonically activated NaOCl that had undergone intracanal heating showed a significantly smaller amount of debris compared to ultrasonically activated and traditionally applied NaOCl groups (p value < 0.05). Conclusions: Root canal cleanliness saw significant enhancements by ultrasonically activated NaOCl that had undergone intracanal heating.

Systematic Review on White Spot Lesions Treatments.

The difference in refractive index between the healthy enamel and the demineralized area generates a lesion with a milky white opaque appearance, clearly distinguishable from the surrounding healthy enamel. The aim of this systematic review was to evaluate if the infiltration technique is the most efficient treatment to resolve a white spot lesion when compared with remineralization and microabrasion techniques. The Population/Intervention/Comparison/Outcome question investigated: "in enamel WS lesion, the infiltration treatment compared to remineralization or microabrasion treatments is more or less effective in the camouflage effect?." The research was performed on electronic databases, including Ovid MEDLINE, PubMed, and web of science. The search was conducted up to April 1, 2020. The scientific search engines produced 324 results. Only 14 were screened after screening. Based on the articles analyzed in this systematic review, the resin infiltration technique seems to be the most effective and predictable treatment for the aesthetic resolution of WSLs.

The Use of Bulk Fill Resin-Based Composite in the Sealing of Cavity with Margins in Radicular Cementum.

The aim of this systematic review was to evaluate if the newly introduced bulk fill resin-based composite provides a better marginal sealing in cavity preparations with margins in dental cementum. The population investigation comparison outcome (PICO) framework was: in cavity preparation with margins in dental cementum of human extracted teeth, do bulk fill resin base composites provide a better marginal sealing than non-bulk fill resin-based composites? We performed our research on April 21, 2020. Two authors independently evaluated the abstract and titles for eligibility criteria. Two authors independently extracted the data and assessed the risk of bias in single studies. After the initial screening of 400 abstract and titles, the full text of the articles, that could meet the eligibility criteria, were obtained via the university library. A total of 36 full-text articles were evaluated; 11 articles were finally eligible for the review. Eight studies showed statistically differences, but not significant, in the marginal sealing between bulk fill and nonbulk fill resin-based composite (p > 0.05). One study showed statistically significant differences: SonicFill and Grandio showed better marginal sealing than GrandioSo and SDR(r) (Sirona Dentsply, New York, United States) and the latter two showed better marginal sealing than Filtek Supreme (p < 0.05). One study showed statistically significant less marginal gap of SDR than Filtek Bulk Fill (p = 0.0015) and Filtek Supreme (p < 0.0001). One study showed SDR to have a significantly higher microleakage than the other materials tested (p < 0.05). Based on our current literature review, there are not enough data to establish if bulk fill resin base composite provides a better or a worse marginal sealing at cementum margins.

COVID-19 and the Impact on the Cranio-Oro-Facial Trauma Care in Italy: An Epidemiological Retrospective Cohort Study.

The coronavirus disease 2019 (COVID-19) has deeply modified the organization of hospitals, health care centers, and the patient's behavior. The aim of this epidemiological retrospective cohort study is to evaluate if and how the COVID-19 pandemic has determined a modification in cranio-oro-facial traumatology service. METHODS: The dataset included hospital emergency room access of a six-month pre-pandemic period and six months into pandemic outbreak. The variables collected were: patient age, gender, type of emergency access with relative color code, Glasgow Coma Scale Score, type of discharge. RESULTS: 537 vs. 237 (pre-pandemic vs. pandemic) patients accessed the hospital emergency room and the mean age decreased from 60.79 ± 25.34 to 56.75 ± 24.50 year. Yellow and green code access went from 28.9% and 66.1% to 37.5% and 57.7% (pre-pandemic vs. pandemic). Glasgow Coma Scale (GCS) shows an increase of 16.6% vs. 27.8% of 15 grade score, a 28.7% vs. 28.5% of the 14 grade score and reduction of 13 and 12 grade 40.2% and 14.5% vs. 37.1 and 9.7% (pre-pandemic vs. pandemic). CONCLUSIONS: Since the COVID-19 outbreak continues, epidemiological data are still necessary to perform public health intervention strategies and to appropriately predict the population needs, in order to properly manage the COVID-19 related to oral pathologies as well as the most common health problems.

Lithium Disilicate Ceramic Endocrown Biomechanical Response According to Different Pulp Chamber Extension Angles and Filling Materials.

The purpose of this study is to evaluate the effect of pulp chamber extension angles and filling material mechanical properties on the biomechanical response of a ceramic endocrown. A 3D model of maxillary molar that underwent endodontically treatment was exported to computer aided design software to conduct finite element analysis (FEA). The endocrown model was modified considering different pulp chamber extension angles (right angle; 6°, 12° and 18° of axial divergence). The solids were imported into the computer aided engineering software in Standard for the Exchange of Product Data (STEP) format. Nine different filling materials were simulated to seal the orifice of the root canal system under each endocrown restoration (resin composite, bulk-fill resin composite, alkasite, flowable resin composite, glass ionomer cement, autocured resin-reinforced glass ionomer cement, resin cement, bulk-fill flowable resin composite, zinc oxide cement), totaling 36 models. An axial load (300 N) was applied at the occlusal surface. Results were determined by colorimetric graphs of von-Misses stress (VMS) and Maximum Principal Stress (MPS) on tooth, cement layer, and endocrown restorations. VMS distribution showed a similar pattern between the models, with more stress at the load region for the right-angled endocrowns. The MPS showed that the endocrown intaglio surface and cement layer showed different mechanical responses with different filing materials and pulp chamber angles. The stress peaks plotted in the dispersion plot showed that the filling material stiffness is proportional to the stress magnitude in the endocrown, cement layer and tooth adhesive surface. In addition, the higher the pulp chamber preparation angle, the higher the stress peak in the restoration and tooth, and the lower the stress in the cement layer. Therefore, 6° and 12° pulp chamber angles showed more promising balance between the stresses of the adhesive interface structures. Under the conditions of this study, rigid filling materials were avoided to seal the orifice of root canal system when an endocrown restoration was planned as rehabilitation. In addition, the pulp chamber axial walls were prepared between 6° and 12° of divergence to balance the stress magnitude in the adhesive interface for this treatment modality.

Expression Profile of Stemness Markers CD138, Nestin and Alpha-SMA in Ameloblastic Tumours.

Ameloblastic carcinoma is a rare malignant odontogenic neoplasm with a poor prognosis. It can arise de novo or from a pre-existing ameloblastoma. Research into stemness marker expression in ameloblastic tumours is lacking. This study aimed to explore the immunohistochemical expression of stemness markers nestin, CD138, and alpha-smooth muscle actin (alpha-SMA) for the characterisation of ameloblastic tumours. Six cases of ameloblastoma and four cases of ameloblastic carcinoma were assessed, including one case of ameloblastic carcinoma arising from desmoplastic ameloblastoma. In all tumour samples, CD138 was positive, whilst alpha-SMA was negative. Nestin was negative in all but one tumour sample. Conversely, the presence or absence of these markers varied in stroma samples. Nestin was observed in one ameloblastic carcinoma stroma sample, whilst CD138 was positive in one ameloblastoma case, one desmoplastic ameloblastoma case, and in two ameloblastic carcinoma stroma samples. Finally, alpha-SMA was found positive only in the desmoplastic ameloblastoma stroma sample. Our results suggest nestin expression to be an indicator for ameloblastic carcinoma, and CD138 and alpha-SMA to be promising biomarkers for the malignant transformation of ameloblastoma. Our data showed that nestin, CD138, and alpha-SMA are novel biomarkers for a better understanding of the origins and behaviour of ameloblastic tumours.

Influence of Polymeric Restorative Materials on the Stress Distribution in Posterior Fixed Partial Dentures: 3D Finite Element Analysis.

BACKGROUND: This study evaluated the effect of interim restorative materials (acrylic resin (AR), resin composite (RC) or polyetheretherketone (PEEK) for dental computer-aided design/computer-aided manufacturing (CAD/CAM)) on the stress distribution of a posterior three-unit fixed partial denture. METHODS: The abutment teeth (first molar and first premolar) were modeled using the BioCAD protocol containing 1.5 mm of axial reduction and converging axial walls. A static structural analysis was performed in the computer-aided engineering software, and the Maximum Principal Stress criterion was used to analyze the prosthesis and the cement layers of both abutment teeth. The materials were considered isotropic, linearly elastic, homogeneous and with bonded contacts. An axial load (600 N) was applied to the occlusal surface of the second premolar. RESULTS: Regardless of the restorative material, the region of the prosthetic connectors showed the highest tensile stress magnitude. The highest stress peak was observed with the use of RC (129 MPa) compared to PEEK and AR. For the cement layers, RC showed the lowest values in the occlusal region (7 MPa) and the highest values for the cervical margin (14 MPa) compared to PEEK (21 and 12 MPa) and AR (21 and 13 MPa). CONCLUSIONS: Different interim restorative materials for posterior fixed partial dentures present different biomechanical behavior. The use of resin composite can attenuate the stress magnitude on the cement layer, and the use of acrylic resin can attenuate the stress magnitude on the connector region.

A new software architecture proposal for an evidence-based Decision Support System in dentistry.

BACKGROUND: in dentistry, clinical problems could be resolved using many therapeutic approaches that may results in very different therapies. In order to choose the best option, a good evaluation of therapy long-term survival and success rate is mandatory. The routine use of a decision support analysis software is nowadays limited due to the lack of software's flexibility especially when a variety of possible therapeutic option are present. The aim of this research was to develop a new algorithm model for a Decision Support System software to give diagnosis support in dentistry. METHODS: Beta tests were designed to study the computer software in different clinical situations based on clinical data. The therapeutic options can be conservative/endodontic or extractive/prosthetic therapies. In two of clinical situation selected could be possible to choose both therapies. RESULTS: in clinical situations tested, the DDS software correctly identified the several therapeutic options. When multiple treatments were possible the beta test showed an output mask that correctly showed a range of options with their corresponding survival and success rate. CONCLUSIONS: The software architecture proposed by the authors is technically feasible, can support the clinician choices based on scientific evidence and up-to-date references and gain informed consent based on data easily understandable for the patient.