Colorimetric and Fluorometric Determination of Fluoride in Tetrahydrofuran and Dimethyl Sulfoxide Using a 4-Hydroxypyrene Probe.

F- ions (fluoride ions) are crucial in various chemical waste and environmental safety contexts. However, excessive fluoride exposure can pose a threat to human well-being. In this study, a simple 4-substituted pyrene derivative known as 4-hydroxypyrene (4-PyOH) was designed as a colorimetric probe for detecting F- through the formation of hydrogen bonds between F- and a hydroxyl group. The probe 4-PyOH exhibited exceptional sensitivity and selectivity towards F- ions and was successfully utilized as test strips for detecting F- ions in organic solvents. The detection limit reached an impressively low level of 3.06 × 10-7 M in the organic solvent. The recognition mechanism was confirmed through 1H NMR titration.

The Electrocatalytic Role of Oxygen Vacancy in Nitrate Reduction Reactions.

Ammonia, with high energy density and easy transportation, holds significant potential to become an integral part of future energy systems. Among tremendous strategies, electrocatalytic ammonia production is no doubt an efficient and eco-friendly method. One particularly intriguing class of electrocatalysts for reducing nitrate to ammonia is transition metal oxides, which have been heavily researched. However, how these catalysts' oxygen vacancy (VO) affects their performance remains elusive. To address this, taking titania (the most important catalyst) as an example, we carried out experimental investigations and simulations. Contrary to the prevailing belief that the concentrated VO would increase the catalytic efficiency of nitrate reduction, it was found that a relatively low level of VO is favorable for maximizing catalytic efficiency. At low cathodic voltages, titania with minimal VO delivered both the highest reduction efficiency and the best selectivity among the different titania samples in this paper. In addition to outlining the merits of lower electron transfer resistance and accelerated reaction dynamics, we also put forth a previously unmentioned factor, the adsorption of hydrogen or the creation of an ordered hydrogen bond network, which put up a hydrogen-rich atmosphere for following nitrate reduction. Further simulation study revealed that within the hydrogen-rich atmosphere isolated VO serves as the ideal active center to enable the lowest energy barriers for the reduction of nitrate into ammonia. These findings offer fresh insights into the working mechanism of oxide-based electrocatalysts for ammonia production.

Electrical Polarity Modulation in V-Doped Monolayer WS2 for Homogeneous CMOS Inverters.

As demand for higher integration density and smaller devices grows, silicon-based complementary metal-oxide-semiconductor (CMOS) devices will soon reach their ultimate limits. 2D transition metal dichalcogenides (TMDs) semiconductors, known for excellent electrical performance and stable atomic structure, are seen as promising materials for future integrated circuits. However, controlled and reliable doping of 2D TMDs, a key step for creating homogeneous CMOS logic components, remains a challenge. In this study, a continuous electrical polarity modulation of monolayer WS2 from intrinsic n-type to ambipolar, then to p-type, and ultimately to a quasi-metallic state is achieved simply by introducing controllable amounts of vanadium (V) atoms into the WS2 lattice as p-type dopants during chemical vapor deposition (CVD). The achievement of purely p-type field-effect transistors (FETs) is particularly noteworthy based on the 4.7 at% V-doped monolayer WS2, demonstrating a remarkable on/off current ratio of 105. Expanding on this triumph, the first initial prototype of ultrathin homogeneous CMOS inverters based on monolayer WS2 is being constructed. These outcomes validate the feasibility of constructing homogeneous CMOS devices through the atomic doping process of 2D materials, marking a significant milestone for the future development of integrated circuits.

Coupling High Hardness and Zn Affinity in Amorphous-Crystalline Diamond for Stable Zn Metal Anodes.

The highly reversible plating/stripping of Zn is plagued by dendrite growth and side reactions on metallic Zn anodes, retarding the commercial application of aqueous Zn-ion batteries. Herein, a distinctive nano dual-phase diamond (NDPD) comprised of an amorphous-crystalline heterostructure is developed to regulate Zn deposition and mechanically block dendrite growth. The rich amorphous-crystalline heterointerfaces in the NDPD endow modified Zn anodes with enhanced Zn affinity and result in homogeneous nucleation. In addition, the unparalleled hardness of the NDPD effectively overcomes the high growth stress of dendrites and mechanically impedes their proliferation. Moreover, the hydrophobic surfaces of the NDPD facilitate the desolvation of hydrate Zn2+ and prevent water-mediated side reactions. Consequently, the Zn@NDPD presents an ultrastable lifespan exceeding 3200 h at 5 mA cm-2 and 1 mAh cm-2. The practical application potential of Zn@NDPD is further demonstrated in full cells. This work exhibits the great significance of a chemical-mechanical synergistic anode modification strategy in constructing high-performance aqueous Zn-ion batteries.

From salt water to bioceramics: Mimic nature through pressure-controlled hydration and crystallization.

Modern synthetic technology generally invokes high temperatures to control the hydration level of ceramics, but even the state-of-the-art technology can still only control the overall hydration content. Magically, natural organisms can produce bioceramics with tailorable hydration profiles and crystallization traits solely from amorphous precursors under physiological conditions. To mimic the biomineralization tactic, here, we report pressure-controlled hydration and crystallization in fabricated ceramics, solely from the amorphous precursors of purely inorganic gels (PIGs) synthesized from biocompatible aqueous solutions with most common ions in organisms (Ca2+, Mg2+, CO32-, and PO43-). Transparent ceramic tablets are directly produced by compressing the PIGs under mild pressure, while the pressure regulates the hydration characteristics and the subsequent crystallization behaviors of the synthesized ceramics. Among the various hydration species, the moderately bound and ordered water appears to be a key in regulating the crystallization rate. This nature-inspired study offers deeper insights into the magic behind biomineralization.