RESUMO
Herein, we demonstrate the synthesis of a bicyclic carbonate monomer of a d-glucal derivative, which originated from the natural product d-glucose, in an efficient three-step procedure and its ring-opening polymerization (ROP), initiated by 4-methylbenzyl alcohol, via organocatalysis. The ROP behavior was studied as a function of time, catalyst type, and catalyst concentration by using size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Using a cocatalyst system of 1,8-diazabicyclo[5.4.0]undec-7-ene and 1-(3,5-bis(trifluoromethyl)phenyl)-3-cyclohexyl-2-thiourea (5 mol %) afforded poly(d-glucal-carbonate) (PGCC) with almost complete monomer conversion (ca. 99%) within 1 min, as analyzed by 1H NMR spectroscopy, and a monomodal SEC trace with dispersity of 1.13. The resulting PGCCs exhibited amorphous characteristics with a relatively high glass transition temperature at ca. 69 °C and onset decomposition temperature at ca. 190 °C, as analyzed by differential scanning calorimetry and thermogravimetric analysis, respectively. This new type of potentially degradable polymer system represents a reactive functional polymer architecture.
RESUMO
Polyurethane shape memory polymers (SMPs) with tunable thermomechanical properties and advanced processing capabilities are synthesized, characterized, and implemented in the design of a microactuator medical device prototype. The ability to manipulate glass transition temperature (Tg ) and crosslink density in low-molecular weight aliphatic thermoplastic polyurethane SMPs is demonstrated using a synthetic approach that employs UV catalyzed thiol-ene "click" reactions to achieve postpolymerization crosslinking. Polyurethanes containing varying C=C functionalization are synthesized, solution blended with polythiol crosslinking agents and photoinitiator and subjected to UV irradiation, and the effects of number of synthetic parameters on crosslink density are reported. Thermomechanical properties are highly tunable, including glass transitions tailorable between 30 and 105 °C and rubbery moduli tailorable between 0.4 and 20 MPa. This new SMP system exhibits high toughness for many formulations, especially in the case of low crosslink density materials, for which toughness exceeds 90 MJ m(-3) at select straining temperatures. To demonstrate the advanced processing capability and synthetic versatility of this new SMP system, a laser-actuated SMP microgripper device for minimally invasive delivery of endovascular devices is fabricated, shown to exhibit an average gripping force of 1.43 ± 0.37 N and successfully deployed in an in vitro experimental setup under simulated physiological conditions.
Assuntos
Temperatura Alta , Poliuretanos/químicaRESUMO
Polycarbonate networks derived from the natural product quinic acid that can potentially return to their natural building blocks upon hydrolytic degradation are described herein. Solvent-free thiol-ene chemistry was utilized in the copolymerization of tris(alloc)quinic acid and a variety of multifunctional thiol monomers to obtain poly(thioether-co-carbonate) networks with a wide range of achievable thermomechanical properties including glass transition temperatures from -18 to +65 °C and rubbery moduli from 3.8 to 20 MPa. The network containing 1,2-ethanedithiol expressed an average toughness at 25 and 63 °C of 1.08 and 2.35 MJ/m(3), respectively, and an order-of-magnitude increase in the average toughness at 37 °C of 15.56 MJ/m(3).
Assuntos
Produtos Biológicos/química , Reagentes de Ligações Cruzadas/química , Luz , Cimento de Policarboxilato/química , Poliésteres/química , Ácido Quínico/química , Sulfetos/química , Módulo de Elasticidade , Estresse Mecânico , TemperaturaRESUMO
Nanocomposite polymers are prepared using a new sustainable materials synthesis process in which d-Limonene functions simultaneously both as a solvent for recycling polystyrene (PS) waste and as a monomer that undergoes UV-catalyzed thiol-ene polymerization reactions with polythiol comonomers to afford polymeric products composed of precipitated PS phases dispersed throughout elastomeric poly(thioether) networks. These blended networks exhibit mechanical properties that greatly exceed those of either polystyrene or the poly(thioether) network homopolymers alone.
Assuntos
Cicloexenos/química , Poluentes Ambientais/química , Poluentes Ambientais/isolamento & purificação , Polímeros/química , Polímeros/síntese química , Poliestirenos/química , Poliestirenos/isolamento & purificação , Sulfetos/química , Sulfetos/síntese química , Terpenos/química , Bebidas/análise , Técnicas de Química Sintética , Contaminação de Alimentos , Limoneno , PolimerizaçãoRESUMO
A natural product-based polymer platform, having the characteristics of being derived from renewable materials and capable of breaking down, ultimately, into natural byproducts, has been prepared through the ring-opening polymerization (ROP) of a glucose-based bicyclic carbonate monomer. ROP was carried out via chain extension of a polyphosphoester (PPE) macroinitiator in the presence of 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) organocatalyst to afford the PPE-b-poly(D-glucose carbonate) (PDGC) block copolymer. This new copolymer represents a functional architecture that can be rapidly transformed through thiol-yne reactions along the PPE segment into a diverse variety of amphiphilic polymers, which interestingly display stimuli-sensitive phase behavior in the form of a lower critical solution temperature (LCST). Below the LCST, they undergo self-assembly to form spherical core-shell nanostructures that display a poorly defined core-shell morphology. It is expected that hydrophobic patches are exposed within the micellar corona, reminiscent of the surface complexity of proteins, making these materials of interest for triggered and reversible assembly disassembly processes.
Assuntos
Materiais Biocompatíveis/síntese química , Glucose/análogos & derivados , Nanoestruturas/química , Organofosfatos/síntese química , Poliésteres/síntese química , Catálise , Química Click , Glucose/síntese química , Hidrólise , Interações Hidrofóbicas e Hidrofílicas , Cinética , Micelas , Polimerização , Sonicação , Tensoativos/síntese químicaRESUMO
An organocatalyzed ring-opening polymerization methodology was developed for the preparation of polycarbonates derived from glucose as a natural product starting material. The cyclic 4,6-carbonate monomer of glucose having the 1, 2, and 3 positions methyl-protected was prepared in three steps from a commercially available glucose derivative, and the structure was confirmed by means of NMR and IR spectroscopies, electrospray ionization mass spectrometry (MS), and single-crystal X-ray analysis. Polymerization of the monomer, initiated by 4-methylbenzyl alcohol in the presence of 1,5,7-triazabicyclo[4.4.0]dec-5-ene as the organocatalyst, proceeded effectively in a controlled fashion to afford the polycarbonate with a tunable degree of polymerization, narrow molecular weight distribution, and well-defined end groups, as confirmed by a combination of NMR spectroscopy, gel-permeation chromatography, and MALDI-TOF MS. A distribution of head-to-head, head-to-tail, and tail-to-tail regiochemistries was determined by NMR spectroscopy and tandem MS analysis by electron transfer dissociation. These polycarbonates are of interest as engineering materials because of their origination from renewable resources combined with their amorphous character and relatively high glass transition temperatures as determined by X-ray diffraction and differential scanning calorimetry studies.
Assuntos
Compostos Azabicíclicos/química , Glucose/química , Cimento de Policarboxilato/síntese química , Catálise , Cristalografia por Raios X , Modelos Moleculares , Conformação Molecular , Cimento de Policarboxilato/químicaRESUMO
The synthetic design and thermomechanical characterization of shape memory polymers (SMPs) built from a new polyurethane chemistry that enables facile, bulk and tunable cross-linking of low-molecular weight thermoplastics by electron beam irradiation is reported in this study. SMPs exhibit stimuli-induced geometry changes and are being proposed for applications in numerous fields. We have previously reported a polyurethane SMP system that exhibits the complex processing capabilities of thermoplastic polymers and the mechanical robustness and tunability of thermomechanical properties that are often characteristic of thermoset materials. These previously reported polyurethanes suffer practically because the thermoplastic molecular weights needed to achieve target cross-link densities severely limit high-throughput thermoplastic processing and because thermally unstable radiation-sensitizing additives must be used to achieve high enough cross-link densities to enable desired tunable shape memory behavior. In this study, we demonstrate the ability to manipulate cross-link density in low-molecular weight aliphatic thermoplastic polyurethane SMPs (Mw as low as ~1.5 kDa) without radiation-sensitizing additives by incorporating specific structural motifs into the thermoplastic polymer side chains that we hypothesized would significantly enhance susceptibility to e-beam cross-linking. A custom diol monomer was first synthesized and then implemented in the synthesis of neat thermoplastic polyurethane SMPs that were irradiated at doses ranging from 1 to 500 kGy. Dynamic mechanical analysis (DMA) demonstrated rubbery moduli to be tailorable between 0.1 and 55 MPa, and both DMA and sol/gel analysis results provided fundamental insight into our hypothesized mechanism of electron beam cross-linking, which enables controllable bulk cross-linking to be achieved in highly processable, low-molecular weight thermoplastic shape memory polymers without sensitizing additives.
RESUMO
Strategies for the preparation of polycarbonates, derived from natural polyhydroxy monomeric repeat units, were developed for biosourced polycarbonates based on quinic acid. The design and synthesis of regioselectively tert-butyldimethylsilyloxy (TBS)-protected 1,4- and 1,5-diol monomers of quinic acid were followed by optimization of their copolymerizations with phosgene, generated in situ from trichloromethyl chloroformate, to yield protected poly(1,4-quinic acid carbonate) and poly(1,5-quinic acid carbonate). The molecular weights reached ca. 7.6 kDa, corresponding to degrees of polymerization of ca. 24, with polydispersities ranging from 2.0 to 3.5, as measured by SEC using tetrahydrofuran as the eluent and with polystyrene calibration standards. Partially because of the presence of the bicyclic backbone, each regioisomeric poly(quinic acid carbonate) exhibited relatively high glass-transition temperatures, 209 °C for poly(1,4-quinic acid carbonate) and 229 °C for poly(1,5-quinic acid carbonate). Removal of the TBS-protecting groups was studied under mild conditions to achieve control over potential competing reactions involving polymer degradation, which could include cleavage of lactones within the repeat units, carbonate linkages, or both between the repeat units. Full deprotection was not achieved without some degree of polymer degradation. The regiochemistry of the monomer showed significant impact on the reactivity during deprotection and also on the thermal properties, with the 1,5-regioisomeric polymer having lower reactivity and giving higher T(g) values, in comparison with the 1,4-regioisomer. Each regioisomer underwent a 10-20 °C increase in T(g) upon partial removal of the TBS-protecting groups. As the extent of deprotection increased, the solubility decreased. Ultimately, at long deprotection reaction times, the solubility increased and the T(g) decreased because of significant degradation of the polymers.