Optimization and assessment of a novel gastric electrode anchoring system designed to be implanted by minimally invasive surgery.

A novel electrode anchoring design and its implantation procedure, aiming for a minimally invasive solution for gastric electrical stimulation, are presented. The system comprises an anchor made of a flexible body embedding two needle-shaped electrodes. The electrodes can easily switch from a parallel position - to pierce the stomach - to a diverging position - enabling them to remain firmly anchored into the muscular layer of the stomach. Key device parameters governing anchoring stability were assessed on a traction test bench, and optimal values were derived. The device was then implanted in six dogs by open surgery to assess its anchoring durability in vivo. Computed tomography images showed that the electrodes remained well placed within the dogs' gastric wall over the entire assessment period (more than one year). Finally, a prototype of a surgical tool for the minimally invasive device placement was manufactured, and the anchoring procedure was tested on a dog cadaver, providing the proof of concept of the minimally invasive implantation procedure. The use of our electrode anchoring system in long-term gastric electrical stimulation is promising in terms of implantation stability (the anchor withstands a force up to 0.81 N), durability (the anchor remains onto the stomach over one year) and minimal invasiveness of the procedure (the diameter of the percutaneous access is smaller than 12 mm). Moreover, the proposed design could have clinical applications in other hollow organs, such as the urinary bladder.

In Vivo Validation of a Less Invasive Gastrostimulator.

Gastrointestinal stimulator implants have recently shown promising results in helping obese patients lose weight. However, to place the implant, the patient currently needs to undergo an invasive surgical procedure. We report a less invasive procedure to stimulate the stomach with a gastrostimulator. After attempting fully endoscopic implantation, we more recently focused on a single incision percutaneous procedure. In both cases, the challenges in electronic design of the implant are largely similar. This article covers the work achieved to meet these and details the in vivo validation of a gastrostimulator aimed to be endoscopically placed and anchored to the stomach.

Power Strategy in DC/DC Converters to Increase Efficiency of Electrical Stimulators.

Power efficiency is critical for electrical stimulators. Battery life of wearable stimulators and wireless power transmission in implanted systems are common limiting factors. Boost DC/DC converters are typically needed to increase the supply voltage of the output stage. Traditionally, boost DC/DC converters are used with fast control to regulate the supply voltage of the output. However, since stimulators are acting as current sources, such voltage regulation is not needed. Banking on this, this paper presents a DC/DC conversion strategy aiming to increase power efficiency. It compares, in terms of efficiency, the traditional use of boost converters to two alternatives that could be implemented in future hardware designs.

Design and Implementation of a Less Invasive Gastrostimulator.

Gastrointestinal stimulator implants have recently shown positive results in helping obese patients lose weight. However, to place the implant, the patient currently needs to undergo an invasive surgical procedure. Our team is aiming for a less invasive procedure to stimulate the stomach with a gastrostimulator. Attempts covered fully endoscopic implantation and, more recently, we have focussed on a single incision laparoscopic procedure. Whatever the chosen implantation solution, the electronic design of the implant system shares many challenges. This paper covers the work achieved to meet these.

Inductive Powering of Subcutaneous Stimulators: Key Parameters and Their Impact on the Design Methodology.

Inductive powering of implantable medical devices involves numerous factors acting on the system efficiency and safety in adversarial ways. This paper lightens up their role and identifies a procedure enabling the system design. The latter enables the problem to be decoupled into four principal steps: the frequency choice, the magnetic link optimization, the secondary circuit and then finally the primary circuit designs. The methodology has been tested for the powering system of a device requirering a power of 300mW and implanted at a distance of 15 to 30mm from the outside power source. It allowed the identification of the most critical parameters. A satisfying efficiency of 34% was reached at 21mm and tend to validate the proposed design procedure.

Soft Encapsulation of Flexible Electrical Stimulation Implant: Challenges and Innovations.

In this document we discuss the main challenges encountered when producing flexible electrical stimulation implants, and present our approach to solving them for prototype production. We include a study of the optimization of the flexible PCB design, the selection of additive manufacturing materials for the mold, and the chemical compatibility of the different materials. Our approach was tested on a flexible gastro-stimulator as part of the ENDOGES research program.

Silicone rubber encapsulation for an endoscopically implantable gastrostimulator.

Gastrointestinal stimulator implants have recently shown positive results in treating obesity. However, the implantation currently requires an invasive surgical procedure. Endoscopy could be used to place the gastric stimulator in the stomach, hence avoiding the riskier surgery. The implant then needs to go through the oesophagus and be located inside the stomach, which imposes new design constraints, such as miniaturization and protecting the electronic circuit against the highly acidic environment of the stomach. We propose to protect the implant by encapsulation with silicone rubber. This paper lists the advantages of this method compared to the more usual approach of a hermetic enclosure and then presents a method to evaluate the underwater adhesive stability of six adhesive/substrate couples, using repeated lap-shear tests and an elevated temperature to accelerate the ageing process. The results for different adhesive/substrate couples tested, presented on probability plots, show that FR4 and alumina substrates with MED4-4220 silicone rubber are suitable for a first implantable prototype. We then compare these with the predicted lifetimes of bonds between historical standard silicone rubber DC3140 and different substrates and describe the encapsulation of our gastrostimulator.

Safety of multi-channel stimulation implants: a single blocking capacitor per channel is not sufficient after single-fault failure.

One reason given for placing capacitors in series with stimulation electrodes is that they prevent direct current flow and therefore tissue damage under fault conditions. We show that this is not true for multiplexed multi-channel stimulators with one capacitor per channel. A test bench of two stimulation channels, two stimulation tripoles and a saline bath was used to measure the direct current flowing through the electrodes under two different single fault conditions. The electrodes were passively discharged between stimulation pulses. For the particular condition used (16 mA, 1 ms stimulation pulse at 20 Hz with electrodes placed 5 cm apart), the current ranged from 38 to 326 µA depending on the type of fault. The variation of the fault current with time, stimulation amplitude, stimulation frequency and distance between the electrodes is given. Possible additional methods to improve safety are discussed.